Message ID | 20200911130950.578483-3-dmitry.baryshkov@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | clk: qcom: handle power domains links for GDSC | expand |
On Fri 11 Sep 08:09 CDT 2020, Dmitry Baryshkov wrote: > Some GDSCs (SM8250's MDSS_GDSC for example) need switchable power domain > to be on to be able to access hardware registers. Use dev_pm/opp to ^ What you describe here ----+ sounds like the GDSC controller is part of the power-domain specified and hence needs to be enabled in order to control the GDSC. But in contrast what the patch implements is a mechanism where the GDSC power-domain is a child of some other power-domain. So the commit message needs to better reflect what's implemented. Then looking at the DT representation I think it says that the controller sits in the specified power-domain, rather than the exposed power-domain... > enable corresponding power domain. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/clk/qcom/gdsc.c | 56 ++++++++++++++++++++++++++++++++++++++--- > drivers/clk/qcom/gdsc.h | 5 ++++ > 2 files changed, 57 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c > index bfc4ac02f9ea..a522e062a79a 100644 > --- a/drivers/clk/qcom/gdsc.c > +++ b/drivers/clk/qcom/gdsc.c > @@ -11,6 +11,7 @@ > #include <linux/kernel.h> > #include <linux/ktime.h> > #include <linux/pm_domain.h> > +#include <linux/pm_opp.h> > #include <linux/regmap.h> > #include <linux/regulator/consumer.h> > #include <linux/reset-controller.h> > @@ -110,13 +111,31 @@ static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status) > return -ETIMEDOUT; > } > > +int gdsc_toggle_on(struct gdsc *sc) This should be "static" and I think you should include "supply" in the name to denote that it doesn't turn on the gdsc, but rather its supply. > +{ > + if (sc->rsupply) > + return regulator_enable(sc->rsupply); > + if (sc->pd_dev) > + return dev_pm_genpd_set_performance_state(sc->pd_dev, sc->pd_opp); > + return 0; > +} > + > +int gdsc_toggle_off(struct gdsc *sc) > +{ > + if (sc->pd_dev) > + return dev_pm_genpd_set_performance_state(sc->pd_dev, 0); > + if (sc->rsupply) > + return regulator_disable(sc->rsupply); > + return 0; > +} > + > static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status) > { > int ret; > u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK; > > - if (status == GDSC_ON && sc->rsupply) { > - ret = regulator_enable(sc->rsupply); > + if (status == GDSC_ON) { > + ret = gdsc_toggle_on(sc); > if (ret < 0) > return ret; > } > @@ -153,8 +172,8 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status) > ret = gdsc_poll_status(sc, status); > WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n"); > > - if (!ret && status == GDSC_OFF && sc->rsupply) { > - ret = regulator_disable(sc->rsupply); > + if (!ret && status == GDSC_OFF) { > + ret = gdsc_toggle_off(sc); > if (ret < 0) > return ret; > } > @@ -407,6 +426,27 @@ int gdsc_register(struct gdsc_desc *desc, > return PTR_ERR(scs[i]->rsupply); > } > > + for (i = 0; i < num; i++) { > + if (!scs[i] || !scs[i]->domain) > + continue; > + > + scs[i]->pd_opp = of_get_required_opp_performance_state(dev->of_node, scs[i]->perf_idx); > + if (scs[i]->pd_opp < 0) > + return scs[i]->pd_opp; > + > + scs[i]->pd_dev = dev_pm_domain_attach_by_name(dev, scs[i]->domain); > + if (IS_ERR(scs[i]->pd_dev)) { > + ret = PTR_ERR(scs[i]->pd_dev); > + /* Single domain has been already attached, so reuse dev */ > + if (ret == -EEXIST) { > + scs[i]->pd_dev = dev; > + } else { > + scs[i]->pd_dev = NULL; > + goto pm_detach; > + } > + } > + } > + > data->num_domains = num; > for (i = 0; i < num; i++) { > if (!scs[i]) > @@ -428,6 +468,12 @@ int gdsc_register(struct gdsc_desc *desc, > } > > return of_genpd_add_provider_onecell(dev->of_node, data); > + > +pm_detach: > + for (i = 0; i < num; i++) > + if (scs[i]->pd_dev) > + dev_pm_domain_detach(scs[i]->pd_dev, false); I think that if dev_pm_domain_attach_by_name() returned -EEXIST you will attempt to detach the main device's domain here. > + return ret; > } > > void gdsc_unregister(struct gdsc_desc *desc) > @@ -443,6 +489,8 @@ void gdsc_unregister(struct gdsc_desc *desc) > continue; > if (scs[i]->parent) > pm_genpd_remove_subdomain(scs[i]->parent, &scs[i]->pd); > + if (scs[i]->pd_dev && scs[i]->pd_dev != dev) > + dev_pm_domain_detach(scs[i]->pd_dev, true); Ditto Regards, Bjorn > } > of_genpd_del_provider(dev->of_node); > } > diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h > index bd537438c793..d58575f8f25f 100644 > --- a/drivers/clk/qcom/gdsc.h > +++ b/drivers/clk/qcom/gdsc.h > @@ -57,6 +57,11 @@ struct gdsc { > > const char *supply; > struct regulator *rsupply; > + > + const char *domain; > + unsigned int perf_idx; > + struct device *pd_dev; > + int pd_opp; > }; > > struct gdsc_desc { > -- > 2.28.0 >
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c index bfc4ac02f9ea..a522e062a79a 100644 --- a/drivers/clk/qcom/gdsc.c +++ b/drivers/clk/qcom/gdsc.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/ktime.h> #include <linux/pm_domain.h> +#include <linux/pm_opp.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/reset-controller.h> @@ -110,13 +111,31 @@ static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status) return -ETIMEDOUT; } +int gdsc_toggle_on(struct gdsc *sc) +{ + if (sc->rsupply) + return regulator_enable(sc->rsupply); + if (sc->pd_dev) + return dev_pm_genpd_set_performance_state(sc->pd_dev, sc->pd_opp); + return 0; +} + +int gdsc_toggle_off(struct gdsc *sc) +{ + if (sc->pd_dev) + return dev_pm_genpd_set_performance_state(sc->pd_dev, 0); + if (sc->rsupply) + return regulator_disable(sc->rsupply); + return 0; +} + static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status) { int ret; u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK; - if (status == GDSC_ON && sc->rsupply) { - ret = regulator_enable(sc->rsupply); + if (status == GDSC_ON) { + ret = gdsc_toggle_on(sc); if (ret < 0) return ret; } @@ -153,8 +172,8 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status) ret = gdsc_poll_status(sc, status); WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n"); - if (!ret && status == GDSC_OFF && sc->rsupply) { - ret = regulator_disable(sc->rsupply); + if (!ret && status == GDSC_OFF) { + ret = gdsc_toggle_off(sc); if (ret < 0) return ret; } @@ -407,6 +426,27 @@ int gdsc_register(struct gdsc_desc *desc, return PTR_ERR(scs[i]->rsupply); } + for (i = 0; i < num; i++) { + if (!scs[i] || !scs[i]->domain) + continue; + + scs[i]->pd_opp = of_get_required_opp_performance_state(dev->of_node, scs[i]->perf_idx); + if (scs[i]->pd_opp < 0) + return scs[i]->pd_opp; + + scs[i]->pd_dev = dev_pm_domain_attach_by_name(dev, scs[i]->domain); + if (IS_ERR(scs[i]->pd_dev)) { + ret = PTR_ERR(scs[i]->pd_dev); + /* Single domain has been already attached, so reuse dev */ + if (ret == -EEXIST) { + scs[i]->pd_dev = dev; + } else { + scs[i]->pd_dev = NULL; + goto pm_detach; + } + } + } + data->num_domains = num; for (i = 0; i < num; i++) { if (!scs[i]) @@ -428,6 +468,12 @@ int gdsc_register(struct gdsc_desc *desc, } return of_genpd_add_provider_onecell(dev->of_node, data); + +pm_detach: + for (i = 0; i < num; i++) + if (scs[i]->pd_dev) + dev_pm_domain_detach(scs[i]->pd_dev, false); + return ret; } void gdsc_unregister(struct gdsc_desc *desc) @@ -443,6 +489,8 @@ void gdsc_unregister(struct gdsc_desc *desc) continue; if (scs[i]->parent) pm_genpd_remove_subdomain(scs[i]->parent, &scs[i]->pd); + if (scs[i]->pd_dev && scs[i]->pd_dev != dev) + dev_pm_domain_detach(scs[i]->pd_dev, true); } of_genpd_del_provider(dev->of_node); } diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h index bd537438c793..d58575f8f25f 100644 --- a/drivers/clk/qcom/gdsc.h +++ b/drivers/clk/qcom/gdsc.h @@ -57,6 +57,11 @@ struct gdsc { const char *supply; struct regulator *rsupply; + + const char *domain; + unsigned int perf_idx; + struct device *pd_dev; + int pd_opp; }; struct gdsc_desc {
Some GDSCs (SM8250's MDSS_GDSC for example) need switchable power domain to be on to be able to access hardware registers. Use dev_pm/opp to enable corresponding power domain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/clk/qcom/gdsc.c | 56 ++++++++++++++++++++++++++++++++++++++--- drivers/clk/qcom/gdsc.h | 5 ++++ 2 files changed, 57 insertions(+), 4 deletions(-)