| Message ID | 20200924112644.11076-1-faiz_abbas@ti.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for MMC/SD on j7200-evm | expand |
On 24/09/20 4:56 PM, Faiz Abbas wrote: > The following patches add dt support for MMC/SD on TI's j7200-evm. > > Currently, eMMC support upto HS200 speed and SD card supports upto high > speed speed mode. To be sure, the TRM calls for SD card speed up to DDR50. And I believe there is work going on to go higher too. That needs voltage switching though and can come in as follow-on patches. This is good first step. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Thanks, Sekhar
On 9/24/20 4:56 PM, Faiz Abbas wrote: > The following patches add dt support for MMC/SD on TI's j7200-evm. > > Currently, eMMC support upto HS200 speed and SD card supports upto high > speed speed mode. > > v2: > Fixed node names to use mmc@* format > Fixed reg address format to align with others in the file > > Faiz Abbas (2): > arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes > arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and > SD card > > .../dts/ti/k3-j7200-common-proc-board.dts | 28 ++++++++++++++ > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 37 +++++++++++++++++++ > 2 files changed, 65 insertions(+) > For the series: Tested-by: Vignesh Raghavendra <vigneshr@ti.com> [ 1.678263] mmc0: Command Queue Engine enabled [ 1.682727] mmc0: new HS200 MMC card at address 0001 [ 1.688193] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 1.692971] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB [ 1.699138] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB [ 1.705268] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, ch ardev (240:0) [ 1.789527] mmc1: new high speed SDHC card at address aaaa [ 1.795621] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 1.810074] mmcblk1: p1 p2 SD hot plug works fine too.. Full log: https://pastebin.ubuntu.com/p/5hcCQDjhtW/
On Thu, 24 Sep 2020 16:56:42 +0530, Faiz Abbas wrote: > The following patches add dt support for MMC/SD on TI's j7200-evm. > > Currently, eMMC support upto HS200 speed and SD card supports upto high > speed speed mode. > > v2: > Fixed node names to use mmc@* format > Fixed reg address format to align with others in the file > > [...] Hi Faiz Abbas, I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/2] arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes commit: 7cd03dc78b290400875b6b54e257ba5ea4e810c3 [2/2] arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card commit: a2178b83ae8f61b2a9fae2aa9a4d4ed2511690a4 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
The following patches add dt support for MMC/SD on TI's j7200-evm. Currently, eMMC support upto HS200 speed and SD card supports upto high speed speed mode. v2: Fixed node names to use mmc@* format Fixed reg address format to align with others in the file Faiz Abbas (2): arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card .../dts/ti/k3-j7200-common-proc-board.dts | 28 ++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 37 +++++++++++++++++++ 2 files changed, 65 insertions(+)