@@ -299,6 +299,7 @@ xen/arch/*/efi/boot.c
xen/arch/*/efi/compat.c
xen/arch/*/efi/ebmalloc.c
xen/arch/*/efi/efi.h
+xen/arch/*/efi/pe.c
xen/arch/*/efi/runtime.c
xen/common/config_data.S
xen/common/config.gz
@@ -116,3 +116,52 @@ Filenames must be specified relative to the location of the EFI binary.
Extra options to be passed to Xen can also be specified on the command line,
following a `--` separator option.
+
+## Unified Xen kernel image
+
+The "Unified" kernel image can be generated by adding additional
+sections to the Xen EFI executable with objcopy, similar to how
+[systemd-boot uses the stub to add them to the Linux kernel](https://wiki.archlinux.org/index.php/systemd-boot#Preparing_a_unified_kernel_image)
+
+The sections for the xen configuration file, the dom0 kernel, dom0 initrd,
+XSM and CPU microcode should be added after the Xen `.pad` section, the
+ending address of which can be located with:
+
+```
+objdump -h xen.efi \
+ | perl -ane '/\.pad/ && printf "0x%016x\n", hex($F[2]) + hex($F[3])'
+```
+
+For all the examples the `.pad` section ended at 0xffff82d041000000.
+All the sections are optional (`.config`, `.kernel`, `.ramdisk`, `.xsm`,
+`.ucode` (x86) and `.dtb` (ARM)) and the order does not matter.
+The virtual addresses do not need to be contiguous, although they should not
+be overlapping and should all be greater than the last virtual address of the
+hypervisor components.
+
+```
+objcopy \
+ --add-section .config=xen.cfg \
+ --change-section-vma .config=0xffff82d041000000
+ --add-section .ucode=ucode.bin \
+ --change-section-vma .ucode=0xffff82d041010000 \
+ --add-section .xsm=xsm.cfg \
+ --change-section-vma .xsm=0xffff82d041080000 \
+ --add-section .kernel=vmlinux \
+ --change-section-vma .kernel=0xffff82d041100000 \
+ --add-section .ramdisk=initrd.img \
+ --change-section-vma .ramdisk=0xffff82d042000000 \
+ xen.efi \
+ xen.unified.efi
+```
+
+The unified executable can be signed with sbsigntool to make
+it usable with UEFI secure boot:
+
+```
+sbsign \
+ --key signing.key \
+ --cert cert.pem \
+ --output xen.signed.efi \
+ xen.unified.efi
+```
@@ -375,27 +375,36 @@ static void __init noreturn efi_arch_post_exit_boot(void)
efi_xen_start(fdt, fdt_totalsize(fdt));
}
-static void __init efi_arch_cfg_file_early(EFI_FILE_HANDLE dir_handle, char *section)
+static void __init efi_arch_cfg_file_early(const EFI_LOADED_IMAGE *image,
+ EFI_FILE_HANDLE dir_handle,
+ const char *section)
{
union string name;
/*
* The DTB must be processed before any other entries in the configuration
- * file, as the DTB is updated as modules are loaded.
+ * file, as the DTB is updated as modules are loaded. Prefer the one
+ * stored as a PE section in a unified image, and fall back to a file
+ * on disk if the section is not present.
*/
- name.s = get_value(&cfg, section, "dtb");
- if ( name.s )
+ if ( !read_section(image, L"dtb", &dtbfile, NULL) )
{
- split_string(name.s);
- read_file(dir_handle, s2w(&name), &dtbfile, NULL);
- efi_bs->FreePool(name.w);
+ name.s = get_value(&cfg, section, "dtb");
+ if ( name.s )
+ {
+ split_string(name.s);
+ read_file(dir_handle, s2w(&name), &dtbfile, NULL);
+ efi_bs->FreePool(name.w);
+ }
}
fdt = fdt_increase_size(&dtbfile, cfg.size + EFI_PAGE_SIZE);
if ( !fdt )
blexit(L"Unable to create new FDT");
}
-static void __init efi_arch_cfg_file_late(EFI_FILE_HANDLE dir_handle, char *section)
+static void __init efi_arch_cfg_file_late(const EFI_LOADED_IMAGE *image,
+ EFI_FILE_HANDLE dir_handle,
+ const char *section)
{
}
@@ -8,7 +8,7 @@ cmd_objcopy_o_ihex = $(OBJCOPY) -I ihex -O binary $< $@
boot.init.o: buildid.o
-EFIOBJ := boot.init.o ebmalloc.o compat.o runtime.o
+EFIOBJ := boot.init.o pe.init.o ebmalloc.o compat.o runtime.o
$(call cc-option-add,cflags-stack-boundary,CC,-mpreferred-stack-boundary=4)
$(EFIOBJ): CFLAGS-stack-boundary := $(cflags-stack-boundary)
@@ -272,14 +272,21 @@ static void __init noreturn efi_arch_post_exit_boot(void)
unreachable();
}
-static void __init efi_arch_cfg_file_early(EFI_FILE_HANDLE dir_handle, char *section)
+static void __init efi_arch_cfg_file_early(const EFI_LOADED_IMAGE *image,
+ EFI_FILE_HANDLE dir_handle,
+ const char *section)
{
}
-static void __init efi_arch_cfg_file_late(EFI_FILE_HANDLE dir_handle, char *section)
+static void __init efi_arch_cfg_file_late(const EFI_LOADED_IMAGE *image,
+ EFI_FILE_HANDLE dir_handle,
+ const char *section)
{
union string name;
+ if ( read_section(image, L"ucode", &ucode, NULL) )
+ return;
+
name.s = get_value(&cfg, section, "ucode");
if ( !name.s )
name.s = get_value(&cfg, "global", "ucode");
@@ -122,6 +122,8 @@ static CHAR16 *s2w(union string *str);
static char *w2s(const union string *str);
static bool read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
struct file *file, const char *options);
+static bool read_section(const EFI_LOADED_IMAGE *image,
+ CHAR16 *name, struct file *file, const char *options);
static size_t wstrlen(const CHAR16 * s);
static int set_color(u32 mask, int bpp, u8 *pos, u8 *sz);
static bool match_guid(const EFI_GUID *guid1, const EFI_GUID *guid2);
@@ -624,6 +626,22 @@ static bool __init read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
return true;
}
+static bool __init read_section(const EFI_LOADED_IMAGE *image,
+ CHAR16 *name, struct file *file,
+ const char *options)
+{
+ file->ptr = pe_find_section(image->ImageBase, image->ImageSize,
+ name, &file->size);
+ if ( !file->ptr )
+ return false;
+
+ file->need_to_free = false;
+
+ handle_file_info(name, file, options);
+
+ return true;
+}
+
static void __init pre_parse(const struct file *cfg)
{
char *ptr = cfg->str, *end = ptr + cfg->size;
@@ -1208,9 +1226,11 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
/* Get the file system interface. */
dir_handle = get_parent_handle(loaded_image, &file_name);
- /* Read and parse the config file. */
- if ( !cfg_file_name )
+ if ( read_section(loaded_image, L"config", &cfg, NULL) )
+ PrintStr(L"Using builtin config file\r\n");
+ else if ( !cfg_file_name )
{
+ /* Read and parse the config file. */
CHAR16 *tail;
while ( (tail = point_tail(file_name)) != NULL )
@@ -1259,29 +1279,39 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
if ( !name.s )
blexit(L"No Dom0 kernel image specified.");
- efi_arch_cfg_file_early(dir_handle, section.s);
+ efi_arch_cfg_file_early(loaded_image, dir_handle, section.s);
option_str = split_string(name.s);
- read_file(dir_handle, s2w(&name), &kernel, option_str);
- efi_bs->FreePool(name.w);
-
- if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
- (void **)&shim_lock)) &&
- (status = shim_lock->Verify(kernel.ptr, kernel.size)) != EFI_SUCCESS )
- PrintErrMesg(L"Dom0 kernel image could not be verified", status);
- name.s = get_value(&cfg, section.s, "ramdisk");
- if ( name.s )
+ if ( !read_section(loaded_image, L"kernel", &kernel, option_str) )
{
- read_file(dir_handle, s2w(&name), &ramdisk, NULL);
+ read_file(dir_handle, s2w(&name), &kernel, option_str);
efi_bs->FreePool(name.w);
+
+ if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
+ (void **)&shim_lock)) &&
+ (status = shim_lock->Verify(kernel.ptr, kernel.size)) != EFI_SUCCESS )
+ PrintErrMesg(L"Dom0 kernel image could not be verified", status);
}
- name.s = get_value(&cfg, section.s, "xsm");
- if ( name.s )
+ if ( !read_section(loaded_image, L"ramdisk", &ramdisk, NULL) )
{
- read_file(dir_handle, s2w(&name), &xsm, NULL);
- efi_bs->FreePool(name.w);
+ name.s = get_value(&cfg, section.s, "ramdisk");
+ if ( name.s )
+ {
+ read_file(dir_handle, s2w(&name), &ramdisk, NULL);
+ efi_bs->FreePool(name.w);
+ }
+ }
+
+ if ( !read_section(loaded_image, L"xsm", &xsm, NULL) )
+ {
+ name.s = get_value(&cfg, section.s, "xsm");
+ if ( name.s )
+ {
+ read_file(dir_handle, s2w(&name), &xsm, NULL);
+ efi_bs->FreePool(name.w);
+ }
}
/*
@@ -1317,7 +1347,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
}
}
- efi_arch_cfg_file_late(dir_handle, section.s);
+ efi_arch_cfg_file_late(loaded_image, dir_handle, section.s);
efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
cfg.addr = 0;
@@ -47,3 +47,6 @@ const CHAR16 *wmemchr(const CHAR16 *s, CHAR16 c, UINTN n);
/* EFI boot allocator. */
void *ebmalloc(size_t size);
void free_ebmalloc_unused_mem(void);
+
+const void *pe_find_section(const void *image_base, const size_t image_size,
+ const CHAR16 *section_name, UINTN *size_out);
new file mode 100644
@@ -0,0 +1,159 @@
+/*
+ * xen/common/efi/pe.c
+ *
+ * PE executable header parser.
+ *
+ * Derived from https://github.com/systemd/systemd/blob/master/src/boot/efi/pe.c
+ * commit 07d5ed536ec0a76b08229c7a80b910cb9acaf6b1
+ *
+ * Copyright (C) 2015 Kay Sievers <kay@vrfy.org>
+ * Copyright (C) 2020 Trammell Hudson <hudson@trmm.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ */
+
+
+#include "efi.h"
+
+struct DosFileHeader {
+ UINT8 Magic[2];
+ UINT16 LastSize;
+ UINT16 nBlocks;
+ UINT16 nReloc;
+ UINT16 HdrSize;
+ UINT16 MinAlloc;
+ UINT16 MaxAlloc;
+ UINT16 ss;
+ UINT16 sp;
+ UINT16 Checksum;
+ UINT16 ip;
+ UINT16 cs;
+ UINT16 RelocPos;
+ UINT16 nOverlay;
+ UINT16 reserved[4];
+ UINT16 OEMId;
+ UINT16 OEMInfo;
+ UINT16 reserved2[10];
+ UINT32 ExeHeader;
+};
+
+#if defined(__arm__) || defined (__aarch64__)
+#define PE_HEADER_MACHINE 0xaa64
+#elif defined(__x86_64__)
+#define PE_HEADER_MACHINE 0x8664
+#else
+#error "Unknown architecture"
+#endif
+
+struct PeFileHeader {
+ UINT16 Machine;
+ UINT16 NumberOfSections;
+ UINT32 TimeDateStamp;
+ UINT32 PointerToSymbolTable;
+ UINT32 NumberOfSymbols;
+ UINT16 SizeOfOptionalHeader;
+ UINT16 Characteristics;
+};
+
+struct PeHeader {
+ UINT8 Magic[4];
+ struct PeFileHeader FileHeader;
+};
+
+struct PeSectionHeader {
+ CHAR8 Name[8];
+ UINT32 VirtualSize;
+ UINT32 VirtualAddress;
+ UINT32 SizeOfRawData;
+ UINT32 PointerToRawData;
+ UINT32 PointerToRelocations;
+ UINT32 PointerToLinenumbers;
+ UINT16 NumberOfRelocations;
+ UINT16 NumberOfLinenumbers;
+ UINT32 Characteristics;
+};
+
+static int __init pe_name_compare(const struct PeSectionHeader *sect,
+ const CHAR16 *name)
+{
+ size_t i;
+
+ if ( sect->Name[0] != '.' )
+ return -1;
+
+ for ( i = 1; i < sizeof(sect->Name); i++ )
+ {
+ const char c = sect->Name[i];
+ const CHAR16 cw = name[i-1];
+ if ( cw == 0 && c == 0 )
+ return 0;
+ if ( cw < c )
+ return -1;
+ if ( cw > c )
+ return +1;
+ }
+
+ if ( name[i-1] < 0 )
+ return -1;
+ if ( name[i-1] > 0 )
+ return +1;
+ return 0;
+}
+
+const void *__init pe_find_section(const void *image, const UINTN image_size,
+ const CHAR16 *section_name, UINTN *size_out)
+{
+ const struct DosFileHeader *dos = image;
+ const struct PeHeader *pe;
+ const struct PeSectionHeader *sect;
+ UINTN offset, i;
+
+ if ( image_size < sizeof(*dos) ||
+ memcmp(dos->Magic, "MZ", 2) != 0 )
+ return NULL;
+
+ offset = dos->ExeHeader;
+ pe = image + offset;
+
+ offset += sizeof(*pe);
+ if ( image_size < offset ||
+ memcmp(pe->Magic, "PE\0\0", 4) != 0 )
+ return NULL;
+
+ /* PE32+ Subsystem type */
+ if ( pe->FileHeader.Machine != PE_HEADER_MACHINE )
+ return NULL;
+
+ offset += pe->FileHeader.SizeOfOptionalHeader;
+
+ for ( i = 0; i < pe->FileHeader.NumberOfSections; i++ )
+ {
+ sect = image + offset;
+ if ( image_size < offset + sizeof(*sect) )
+ return NULL;
+
+ if ( pe_name_compare(sect, section_name) != 0 )
+ {
+ offset += sizeof(*sect);
+ continue;
+ }
+
+ if ( image_size < sect->VirtualSize + sect->VirtualAddress )
+ blexit(L"PE invalid section size + address");
+
+ if ( size_out )
+ *size_out = sect->VirtualSize;
+
+ return image + sect->VirtualAddress;
+ }
+
+ return NULL;
+}
This patch adds support for bundling the xen.efi hypervisor, the xen.cfg configuration file, the Linux kernel and initrd, as well as the XSM, and architectural specific files into a single "unified" EFI executable. This allows an administrator to update the components independently without requiring rebuilding xen, as well as to replace the components in an existing image. The resulting EFI executable can be invoked directly from the UEFI Boot Manager, removing the need to use a separate loader like grub as well as removing dependencies on local filesystem access. And since it is a single file, it can be signed and validated by UEFI Secure Boot without requring the shim protocol. It is inspired by systemd-boot's unified kernel technique and borrows the function to locate PE sections from systemd's LGPL'ed code. During EFI boot, Xen looks at its own loaded image to locate the PE sections for the Xen configuration (`.config`), dom0 kernel (`.kernel`), dom0 initrd (`.ramdisk`), and XSM config (`.xsm`), which are included after building xen.efi using objcopy to add named sections for each input file. For x86, the CPU ucode can be included in a section named `.ucode`, which is loaded in the efi_arch_cfg_file_late() stage of the boot process. On ARM systems the Device Tree can be included in a section named `.dtb`, which is loaded during the efi_arch_cfg_file_early() stage of the boot process. Note that the system will fall back to loading files from disk if the named sections do not exist. This allows distributions to continue with the status quo if they want a signed kernel + config, while still allowing a user provided initrd (which is how the shim protocol currently works as well). This patch also adds constness to the section parameter of efi_arch_cfg_file_early() and efi_arch_cfg_file_late() and changes pe_find_section() to use a CHAR16 section name. Signed-off-by: Trammell hudson <hudson@trmm.net> --- .gitignore | 1 + docs/misc/efi.pandoc | 49 +++++++++++ xen/arch/arm/efi/efi-boot.h | 25 ++++-- xen/arch/x86/efi/Makefile | 2 +- xen/arch/x86/efi/efi-boot.h | 11 ++- xen/common/efi/boot.c | 66 +++++++++++---- xen/common/efi/efi.h | 3 + xen/common/efi/pe.c | 159 ++++++++++++++++++++++++++++++++++++ 8 files changed, 287 insertions(+), 29 deletions(-) create mode 100644 xen/common/efi/pe.c