| Message ID | 20200929031544.1000204-4-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Qualcomm Light Pulse Generator | expand |
Hi, Just a nitpick: the title says "qcom: msm8996", whereas the file being changed is pm(i)8994.dtsi. This also applies to most msm8992/94 platforms, as the PMIC was used there too. Konrad
On Thu 01 Oct 10:22 CDT 2020, Konrad Dybcio wrote: > Hi, > > Just a nitpick: the title says "qcom: msm8996", whereas the file being changed is pm(i)8994.dtsi. This also applies to most msm8992/94 platforms, as the PMIC was used there too. > Thanks for pointing that out, replacing msm8996 with pm[i]8994 would make more sense. Regards, Bjorn
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 7e4f777746cb..b5bef687aa3c 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -86,6 +86,15 @@ pmic@1 { #address-cells = <1>; #size-cells = <0>; + pm8994_lpg: lpg { + compatible = "qcom,pm8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + pm8994_spmi_regulators: regulators { compatible = "qcom,pm8994-regulators"; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index e5ed28ab9b2d..23f41328d191 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -19,6 +19,17 @@ pmi8994_gpios: gpios@c000 { interrupt-controller; #interrupt-cells = <2>; }; + + pmi8994_mpps: mpps@a000 { + compatible = "qcom,pm8994-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + }; }; pmic@3 { @@ -27,6 +38,15 @@ pmic@3 { #address-cells = <1>; #size-cells = <0>; + pmi8994_lpg: lpg@b100 { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; #address-cells = <1>;
The pm8994 contains a 6 LPG channels. The pmi8994 contains 4 MPP channels and a 4 channel LPG, with TRILED and LUT blocks. Add nodes for these blocks. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v3: - None arch/arm64/boot/dts/qcom/pm8994.dtsi | 9 +++++++++ arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++ 2 files changed, 29 insertions(+)