| Message ID | 20201002234143.3570746-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: Another round of adding missing 'additionalProperties' | expand |
On 10/2/20 4:41 PM, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org For hwmon: Reviewed-by: Guenter Roeck <linux@roeck-us.net> > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 2 ++ > .../arm/mediatek/mediatek,pericfg.yaml | 2 ++ > .../devicetree/bindings/arm/pmu.yaml | 2 ++ > .../devicetree/bindings/arm/primecell.yaml | 3 +++ > .../bindings/arm/samsung/sysreg.yaml | 2 ++ > .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 ++ > .../bindings/bus/mti,mips-cdmm.yaml | 2 ++ > .../bus/socionext,uniphier-system-bus.yaml | 7 +++++++ > .../bindings/clock/arm,syscon-icst.yaml | 2 ++ > .../bindings/clock/idt,versaclock5.yaml | 20 ++++++++++--------- > .../bindings/clock/imx6q-clock.yaml | 2 ++ > .../bindings/clock/imx6sl-clock.yaml | 2 ++ > .../bindings/clock/imx6sll-clock.yaml | 2 ++ > .../bindings/clock/imx6sx-clock.yaml | 2 ++ > .../bindings/clock/imx6ul-clock.yaml | 2 ++ > .../bindings/clock/intel,cgu-lgm.yaml | 2 ++ > .../bindings/clock/qcom,gcc-sm8250.yaml | 2 ++ > .../bindings/clock/sprd,sc9863a-clk.yaml | 2 ++ > .../bindings/clock/ti,am654-ehrpwm-tbclk.yaml | 2 ++ > .../bindings/display/bridge/ite,it6505.yaml | 5 +++++ > .../bindings/display/bridge/lvds-codec.yaml | 3 +++ > .../devicetree/bindings/display/msm/gmu.yaml | 2 ++ > .../devicetree/bindings/edac/dmc-520.yaml | 2 ++ > .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 2 ++ > .../gpio/socionext,uniphier-gpio.yaml | 2 ++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 ++ > .../devicetree/bindings/hwmon/adt7475.yaml | 2 ++ > .../bindings/iio/accel/kionix,kxsd9.yaml | 4 ++++ > .../bindings/iio/adc/maxim,max1238.yaml | 2 ++ > .../bindings/iio/adc/maxim,max1363.yaml | 2 ++ > .../bindings/iio/adc/qcom,spmi-vadc.yaml | 4 ++++ > .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 ++ > .../bindings/iio/adc/ti,ads8688.yaml | 4 ++++ > .../bindings/iio/amplifiers/adi,hmc425a.yaml | 2 ++ > .../bindings/iio/imu/invensense,icm42600.yaml | 6 ++++++ > .../bindings/iio/light/amstaos,tsl2563.yaml | 2 ++ > .../bindings/iio/light/dynaimage,al3010.yaml | 2 ++ > .../bindings/iio/light/dynaimage,al3320a.yaml | 2 ++ > .../bindings/iio/light/sharp,gp2ap002.yaml | 2 ++ > .../iio/magnetometer/asahi-kasei,ak8975.yaml | 2 ++ > .../iio/proximity/vishay,vcnl3020.yaml | 2 ++ > .../interrupt-controller/ingenic,intc.yaml | 2 ++ > .../loongson,pch-msi.yaml | 2 ++ > .../loongson,pch-pic.yaml | 2 ++ > .../devicetree/bindings/ipmi/ipmi-smic.yaml | 2 ++ > .../devicetree/bindings/leds/leds-lp55xx.yaml | 8 ++++++++ > .../bindings/media/i2c/chrontel,ch7322.yaml | 2 ++ > .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 2 ++ > .../bindings/media/nxp,imx8mq-vpu.yaml | 2 ++ > .../bindings/media/qcom,msm8916-venus.yaml | 2 ++ > .../bindings/media/qcom,msm8996-venus.yaml | 2 ++ > .../bindings/media/qcom,sc7180-venus.yaml | 2 ++ > .../bindings/media/qcom,sdm845-venus-v2.yaml | 2 ++ > .../bindings/media/qcom,sdm845-venus.yaml | 2 ++ > .../bindings/memory-controllers/fsl/mmdc.yaml | 2 ++ > .../memory-controllers/st,stm32-fmc2-ebi.yaml | 2 ++ > .../bindings/mfd/gateworks-gsc.yaml | 2 ++ > .../bindings/mfd/xylon,logicvc.yaml | 14 +++++++++++-- > .../bindings/mips/ingenic/ingenic,cpu.yaml | 6 ++++-- > .../bindings/mips/loongson/rs780e-acpi.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-emmc.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++ > .../devicetree/bindings/net/qcom,ipa.yaml | 2 ++ > .../bindings/net/realtek-bluetooth.yaml | 4 +++- > .../net/wireless/microchip,wilc1000.yaml | 4 ++++ > .../devicetree/bindings/pci/rcar-pci-ep.yaml | 2 ++ > .../phy/amlogic,meson-g12a-usb2-phy.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 2 ++ > .../bindings/phy/qcom,qusb2-phy.yaml | 1 + > .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 2 ++ > .../bindings/pinctrl/cirrus,lochnagar.yaml | 2 ++ > .../pinctrl/socionext,uniphier-pinctrl.yaml | 2 ++ > .../power/amlogic,meson-sec-pwrc.yaml | 2 ++ > .../bindings/power/domain-idle-state.yaml | 2 ++ > .../bindings/power/mti,mips-cpc.yaml | 2 ++ > .../bindings/power/supply/cw2015_battery.yaml | 2 ++ > .../bindings/power/supply/rohm,bd99954.yaml | 8 ++++++++ > .../bindings/regulator/silergy,sy8827n.yaml | 2 ++ > .../bindings/remoteproc/qcom,pil-info.yaml | 2 ++ > .../bindings/serial/samsung_uart.yaml | 2 ++ > .../serial/socionext,uniphier-uart.yaml | 2 ++ > .../devicetree/bindings/serial/sprd-uart.yaml | 2 ++ > .../bindings/soc/qcom/qcom,geni-se.yaml | 1 + > .../bindings/sound/amlogic,g12a-toacodec.yaml | 2 ++ > .../bindings/sound/amlogic,gx-sound-card.yaml | 2 ++ > .../bindings/sound/amlogic,t9015.yaml | 2 ++ > .../bindings/sound/cirrus,cs42l51.yaml | 2 ++ > .../devicetree/bindings/sound/fsl,easrc.yaml | 2 ++ > .../bindings/sound/intel,keembay-i2s.yaml | 2 ++ > .../bindings/sound/nvidia,tegra186-dspk.yaml | 2 ++ > .../sound/nvidia,tegra210-admaif.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-dmic.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-i2s.yaml | 2 ++ > .../bindings/sound/rockchip,rk3328-codec.yaml | 2 ++ > .../bindings/sound/tlv320adcx140.yaml | 2 ++ > .../bindings/thermal/rcar-thermal.yaml | 5 +++++ > .../bindings/thermal/sprd-thermal.yaml | 4 ++++ > .../bindings/thermal/thermal-idle.yaml | 2 ++ > .../bindings/thermal/thermal-zones.yaml | 2 ++ > .../devicetree/bindings/timer/cdns,ttc.yaml | 2 ++ > .../bindings/usb/nvidia,tegra-xudc.yaml | 2 ++ > .../devicetree/bindings/usb/qcom,dwc3.yaml | 2 ++ > .../devicetree/bindings/usb/ti,j721e-usb.yaml | 18 +++++++++++++++++ > 105 files changed, 285 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > index 6834f5e8df5f..9fdb319dcf19 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > @@ -54,6 +54,8 @@ required: > - compatible > - mboxes > > +additionalProperties: false > + > examples: > - | > firmware { > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > index 1af30174b2d0..8723dfe34bab 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > @@ -47,6 +47,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > pericfg@10003000 { > diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml > index 97df36d301c9..693ef3f185a8 100644 > --- a/Documentation/devicetree/bindings/arm/pmu.yaml > +++ b/Documentation/devicetree/bindings/arm/pmu.yaml > @@ -93,4 +93,6 @@ properties: > required: > - compatible > > +additionalProperties: false > + > ... > diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml > index 5aae37f1c563..e15fe00aafb2 100644 > --- a/Documentation/devicetree/bindings/arm/primecell.yaml > +++ b/Documentation/devicetree/bindings/arm/primecell.yaml > @@ -33,4 +33,7 @@ properties: > contains: > const: apb_pclk > additionalItems: true > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > index 3b7811804cb4..2ac789058eee 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > @@ -32,6 +32,8 @@ properties: > reg: > maxItems: 1 > > +additionalProperties: false > + > examples: > - | > syscon@10010000 { > diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > index b71a20af5f70..43fd2f8927d0 100644 > --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > @@ -308,6 +308,8 @@ required: > - clocks > - '#clock-cells' > > +additionalProperties: false > + > dependencies: > "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] > "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] > diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > index 9cc2d5f1beef..6a7b26b049f1 100644 > --- a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > cdmm@1bde8000 { > diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > index a0c6c5d2b70f..49df13fc2f89 100644 > --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > @@ -57,6 +57,11 @@ properties: > "ranges" property should provide a "reasonable" default that is known to > work. The software should initialize the bus controller according to it. > > +patternProperties: > + "^.*@[1-5],[1-9a-f][0-9a-f]+$": > + description: Devices attached to chip selects > + type: object > + > required: > - compatible > - reg > @@ -64,6 +69,8 @@ required: > - "#size-cells" > - ranges > > +additionalProperties: false > + > examples: > - | > // In this example, > diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > index 444aeea27db8..eb241587efd1 100644 > --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > @@ -89,6 +89,8 @@ required: > - compatible > - clocks > > +additionalProperties: false > + > examples: > - | > vco1: clock { > diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > index 28c6461b9a9a..2ac1131fd922 100644 > --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > @@ -50,6 +50,15 @@ properties: > '#clock-cells': > const: 1 > > + clock-names: > + minItems: 1 > + maxItems: 2 > + items: > + enum: [ xin, clkin ] > + clocks: > + minItems: 1 > + maxItems: 2 > + > patternProperties: > "^OUT[1-4]$": > type: object > @@ -93,19 +102,12 @@ allOf: > maxItems: 1 > else: > # Devices without builtin crystal > - properties: > - clock-names: > - minItems: 1 > - maxItems: 2 > - items: > - enum: [ xin, clkin ] > - clocks: > - minItems: 1 > - maxItems: 2 > required: > - clock-names > - clocks > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clk/versaclock.h> > diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > index 92a8e545e212..4f4637eddb8b 100644 > --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > @@ -57,6 +57,8 @@ required: > - interrupts > - '#clock-cells' > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > index c97bf95b4150..b83c8f43d664 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > @@ -33,6 +33,8 @@ required: > - interrupts > - '#clock-cells' > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > index de48924be191..484894a4b23f 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > @@ -49,6 +49,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > index e50cddee43c3..e6c795657c24 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > @@ -53,6 +53,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > index 36ce7667c972..6a51a3f51cd9 100644 > --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > @@ -49,6 +49,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > index 6dc1414bfb7f..f3e1a700a2ca 100644 > --- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > @@ -33,6 +33,8 @@ required: > - reg > - '#clock-cells' > > +additionalProperties: false > + > examples: > - | > cgu: clock-controller@e0200000 { > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > index a5766ff89082..80bd6caf5bc9 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > @@ -56,6 +56,8 @@ required: > - '#reset-cells' > - '#power-domain-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,rpmh.h> > diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > index c6d091518650..4069e09cb62d 100644 > --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > @@ -73,6 +73,8 @@ else: > The 'reg' property for the clock node is also required if there is a sub > range of registers for the clocks. > > +additionalProperties: false > + > examples: > - | > ap_clk: clock-controller@21500000 { > diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > index 869b18ac88d7..6b419a9878f3 100644 > --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > @@ -26,6 +26,8 @@ required: > - "#clock-cells" > - reg > > +additionalProperties: false > + > examples: > - | > ehrpwm_tbclk: syscon@4140 { > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index 2c500166c65d..efbb3d0117dc 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -31,6 +31,9 @@ properties: > compatible: > const: ite,it6505 > > + reg: > + maxItems: 1 > + > ovdd-supply: > maxItems: 1 > description: I/O voltage > @@ -63,6 +66,8 @@ required: > - reset-gpios > - extcon > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > index 68951d56ebba..e8fa8e901c9f 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -83,6 +83,9 @@ required: > - compatible > - ports > > +additionalProperties: false > + > + > examples: > - | > lvds-encoder { > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 53056dd02597..fe55611d2603 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -89,6 +89,8 @@ required: > - iommus > - operating-points-v2 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gpucc-sdm845.h> > diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml > index 9272d2bd8634..3b6842e92d1b 100644 > --- a/Documentation/devicetree/bindings/edac/dmc-520.yaml > +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml > @@ -49,6 +49,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: false > + > examples: > - | > dmc0: dmc@200000 { > diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > index b26d4b4be743..e2ca0b000471 100644 > --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > @@ -28,6 +28,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > fsi2spi@1c00 { > diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > index c58ff9a94f45..1a54db04f29d 100644 > --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > @@ -64,6 +64,8 @@ required: > - gpio-ranges > - socionext,interrupt-ranges > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > index 7898b9dba5a5..6747b870f297 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -44,6 +44,8 @@ required: > - interrupts > - pulses-per-revolution > > +additionalProperties: false > + > examples: > - | > fpga_axi: fpga-axi { > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > index dfa821c0aacc..ad0ec9f35bd8 100644 > --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > @@ -65,6 +65,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > index d61ab4fa3d71..390b87242fcb 100644 > --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > @@ -29,10 +29,14 @@ properties: > mount-matrix: > description: an optional 3x3 mounting rotation matrix. > > + spi-max-frequency: true > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > # include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > index cccd3033a55b..50bcd72ac9d6 100644 > --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > @@ -62,6 +62,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > index 48377549c39a..e04f09f35601 100644 > --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > @@ -36,6 +36,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > index 0ca992465a21..7f4f827c57a7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > @@ -48,6 +48,8 @@ properties: > description: > End of conversion interrupt. > > + io-channel-ranges: true > + > required: > - compatible > - reg > @@ -232,6 +234,8 @@ allOf: > enum: [ 1, 2, 4, 8, 16 ] > default: 1 > > +additionalProperties: false > + > examples: > - | > spmi_bus { > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index cc3c8ea6a894..16d76482b4ff 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -107,6 +107,8 @@ allOf: > items: > - const: adc > > +additionalProperties: false > + > examples: > - | > adc: adc@12d10000 { > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > index 97fe6cbb2efa..a0af4b24877f 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > @@ -25,10 +25,14 @@ properties: > description: Optional external reference. If not supplied, assume > REFSEL input tied low to enable the internal reference. > > + spi-max-frequency: true > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > spi { > diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > index 5342360e96b1..a557761d8016 100644 > --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > @@ -33,6 +33,8 @@ required: > - compatible > - ctrl-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > index abd8d25e1136..4c1c083d0e92 100644 > --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > @@ -47,11 +47,17 @@ properties: > vddio-supply: > description: Regulator that provides power to the bus > > + spi-max-frequency: true > + spi-cpha: true > + spi-cpol: true > + > required: > - compatible > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > index e201a06d8fdc..60e76bc035a5 100644 > --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > @@ -32,6 +32,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > index f671edda6641..a3a979553e32 100644 > --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > index 497300239d93..8249be99cff9 100644 > --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > index 12aa16f24772..f8a932be0d10 100644 > --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > @@ -61,6 +61,8 @@ required: > - sharp,proximity-far-hysteresis > - sharp,proximity-close-hysteresis > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > index f0b336ac39c9..a25590a16ba7 100644 > --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > @@ -55,6 +55,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > index 51dba64037f6..fbd3a2e32280 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > @@ -47,6 +47,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > index 02a3cf470518..0a046be8d1cd 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > @@ -49,6 +49,8 @@ required: > - "#interrupt-cells" > - interrupt-controller > > +additionalProperties: false > + > examples: > - | > intc: interrupt-controller@10001000 { > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > index 1b256d9dd92a..1f6fd73d4624 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > @@ -46,6 +46,8 @@ required: > - loongson,msi-base-vec > - loongson,msi-num-vecs > > +additionalProperties: true #fixme > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > index a6dcbb2971a9..fdd6a38a31db 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > @@ -41,6 +41,8 @@ required: > - interrupt-controller > - '#interrupt-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > index 58fa76ee6176..898e3267893a 100644 > --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > @@ -49,6 +49,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > smic@fff3a000 { > diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > index b1bb3feb0f4d..cd877e817ad1 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > @@ -58,6 +58,12 @@ properties: > - 2 # D1~6 with VOUT, D7~9 with VDD > - 3 # D1~9 are connected to VOUT > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > patternProperties: > "(^led@[0-9a-f]$|led)": > type: object > @@ -98,6 +104,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/leds/common.h> > diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > index daa2869377c5..63e5b89d2e0b 100644 > --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > @@ -49,6 +49,8 @@ required: > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > index 107c862a7fc7..3dc06c628e64 100644 > --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > @@ -119,6 +119,8 @@ required: > - reg > - port > > +additionalProperties: false > + > examples: > - | > i2c@e66d8000 { > diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > index a2d1cd77c1e2..762be3f96ce9 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > @@ -55,6 +55,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx8mq-clock.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > index f9606df02d70..59ab16ad12f1 100644 > --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > @@ -92,6 +92,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > index fa0dc6c47f1d..199f45217b4a 100644 > --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > @@ -119,6 +119,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > index 55f2d67ae34e..3cec6dae1139 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > @@ -108,6 +108,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > index 157dff8057e9..55f5d439fa61 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > @@ -103,6 +103,8 @@ required: > - video-core0 > - video-core1 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > index 084e45e2df62..680f37726fdf 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > @@ -120,6 +120,8 @@ required: > - video-core0 > - video-core1 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > index 68484136a510..71547eee9919 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > @@ -33,6 +33,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx6qdl-clock.h> > diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > index 70eaf739036b..cba74205846a 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > @@ -194,6 +194,8 @@ required: > - clocks > - ranges > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > index 9b6eb50606e8..95e47f317ed2 100644 > --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > @@ -144,6 +144,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > index abc9937506e0..8a1a6625c782 100644 > --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > @@ -26,6 +26,12 @@ properties: > reg: > maxItems: 1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > select: > properties: > compatible: > @@ -36,15 +42,19 @@ select: > required: > - compatible > > +patternProperties: > + "^gpio@[0-9a-f]+$": > + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > logicvc: logicvc@43c00000 { > compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; > reg = <0x43c00000 0x6000>; > - #address-cells = <1>; > - #size-cells = <1>; > }; > diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > index 16fa03d65ad5..6df1a9470d8f 100644 > --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > +++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > @@ -32,12 +32,16 @@ properties: > clocks: > maxItems: 1 > > + device_type: true > + > required: > - device_type > - compatible > - reg > - clocks > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/jz4780-cgu.h> > @@ -52,7 +56,6 @@ examples: > reg = <0>; > > clocks = <&cgu JZ4780_CLK_CPU>; > - clock-names = "cpu"; > }; > > cpu1: cpu@1 { > @@ -61,7 +64,6 @@ examples: > reg = <1>; > > clocks = <&cgu JZ4780_CLK_CORE1>; > - clock-names = "cpu"; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > index d317897e1115..7c0f9022202c 100644 > --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > @@ -23,6 +23,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > isa@0 { > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > index 77f746f57284..1fc7e620f328 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > @@ -36,6 +36,8 @@ required: > - compatible > - reset-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > index a68820d31d50..e0169a285aa2 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > @@ -28,6 +28,8 @@ required: > - powerdown-gpios > - reset-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > index 449215444723..06bbd8590544 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > @@ -50,6 +50,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > index 8594f114f016..4d8464b2676d 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > @@ -144,6 +144,8 @@ oneOf: > - required: > - memory-region > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > index c488f24ed38f..4f485df69ac3 100644 > --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > @@ -37,6 +37,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > @@ -49,6 +51,6 @@ examples: > bluetooth { > compatible = "realtek,rtl8723bs-bt"; > device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ > - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > }; > }; > diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > index 2c320eb2a8c4..6c35682377e6 100644 > --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > @@ -18,6 +18,8 @@ properties: > compatible: > const: microchip,wilc1000 > > + reg: true > + > spi-max-frequency: true > > interrupts: > @@ -34,6 +36,8 @@ required: > - compatible > - interrupts > > +additionalProperties: false > + > examples: > - | > spi { > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > index aa483c7f27fd..53d5952b7e57 100644 > --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > @@ -55,6 +55,8 @@ required: > - clock-names > - max-functions > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> > diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > index 0d2557bb0bcc..399ebde45409 100644 > --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > @@ -63,6 +63,8 @@ then: > required: > - power-domains > > +additionalProperties: false > + > examples: > - | > phy@36000 { > diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > index 23887ebe08fd..17f132ce5516 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > @@ -42,6 +42,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq806x.h> > diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > index fa30c24b4405..17fd7f6b83bb 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > @@ -60,6 +60,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq806x.h> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > index ccda92859eca..d457fb6a4779 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > @@ -158,6 +158,7 @@ required: > - vdda-phy-dpdm-supply > - resets > > +additionalProperties: false > > examples: > - | > diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > index 1118fe69b611..3e7191b168fb 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > @@ -36,6 +36,8 @@ required: > - reset-names > - "#phy-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq4019.h> > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > index 420d74856032..a07dd197176a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > @@ -188,3 +188,5 @@ required: > - gpio-ranges > - pinctrl-0 > - pinctrl-names > + > +additionalProperties: false > diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > index f8a93d8680f9..502480a19f49 100644 > --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > @@ -28,6 +28,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. > diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > index bc4e037f3f73..5dae04d2936c 100644 > --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > @@ -27,6 +27,8 @@ required: > - compatible > - "#power-domain-cells" > > +additionalProperties: false > + > examples: > - | > secure-monitor { > diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml > index dfba1af9abe5..6a12efdf436a 100644 > --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml > +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml > @@ -50,6 +50,8 @@ patternProperties: > - exit-latency-us > - min-residency-us > > +additionalProperties: false > + > examples: > - | > > diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > index ccdeaece169e..be447ccfdcb8 100644 > --- a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > cpc@1bde0000 { > diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > index 2036977ecc2f..ee92e6a076ac 100644 > --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > @@ -52,6 +52,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > index 7e0f73a898c7..9852d2febf65 100644 > --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > @@ -112,6 +112,12 @@ properties: > # threshold, and the current is below this setting (7 in above chart) > # See also Documentation/devicetree/bindings/power/supply/battery.txt > > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > monitored-battery: > description: > phandle of battery characteristics devicetree node > @@ -137,6 +143,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > index 15983cdc7c28..b222adabc7b4 100644 > --- a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > @@ -31,6 +31,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > index 87c52316ddbd..9282837d64ba 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > @@ -25,6 +25,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > imem@146bf000 { > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > index 96414ac65d06..21ee627b2ced 100644 > --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > @@ -68,6 +68,8 @@ required: > - interrupts > - reg > > +additionalProperties: false > + > allOf: > - if: > properties: > diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > index 09a30300850c..d490c7c4b967 100644 > --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > @@ -32,6 +32,8 @@ required: > - interrupts > - clocks > > +additionalProperties: false > + > examples: > - | > aliases { > diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml > index e66b2e92a7fc..09f6283f3cae 100644 > --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml > @@ -56,6 +56,8 @@ required: > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > index bd04fdb57414..84671950ca0d 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > @@ -173,6 +173,7 @@ patternProperties: > - compatible > - interrupts > > +additionalProperties: false > > examples: > - | > diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > index b4b3828c40af..3c3891d17238 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > @@ -37,6 +37,8 @@ required: > - reg > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> > diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > index fb374c659be1..db61f0731a20 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > @@ -84,6 +84,8 @@ required: > - model > - dai-link-0 > > +additionalProperties: false > + > examples: > - | > sound { > diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > index 04014e658c90..c7613ea728d4 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > @@ -42,6 +42,8 @@ required: > - clock-names > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/g12a-clkc.h> > diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > index 5bcb643c288f..0d87e2c86a42 100644 > --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > @@ -46,6 +46,8 @@ required: > - reg > - "#sound-dai-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > index 32d547af9ce7..bdde68a1059c 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > @@ -74,6 +74,8 @@ required: > - fsl,asrc-rate > - fsl,asrc-format > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx8mn-clock.h> > diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > index 2e0bbc1c868a..6cbdd8857ea2 100644 > --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > @@ -52,6 +52,8 @@ required: > - clock-names > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > index 2f2fcffa65cb..ed2fb32fcdd4 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > @@ -64,6 +64,8 @@ required: > - assigned-clock-parents > - sound-name-prefix > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra186-clock.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > index 41c77f45d2fd..c028b259e822 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > @@ -81,6 +81,8 @@ required: > - dmas > - dma-names > > +additionalProperties: false > + > examples: > - | > admaif@702d0000 { > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > index 8689d9f18c11..2a3207b550e7 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > @@ -64,6 +64,8 @@ required: > - assigned-clocks > - assigned-clock-parents > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > index 9bbf18153d63..dfc1bf7b7722 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > @@ -82,6 +82,8 @@ required: > - assigned-clocks > - assigned-clock-parents > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > index 5b85ad5e4834..75b3b33b5f1f 100644 > --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > @@ -53,6 +53,8 @@ required: > - rockchip,grf > - "#sound-dai-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > index f578f17f3e04..1bff53d37118 100644 > --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > @@ -138,6 +138,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > index 0994693d240f..7e9557ac0e4a 100644 > --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > @@ -59,6 +59,9 @@ properties: > resets: > maxItems: 1 > > + "#thermal-sensor-cells": > + const: 0 > + > if: > properties: > compatible: > @@ -79,6 +82,8 @@ else: > - power-domains > - resets > > +additionalProperties: false > + > examples: > # Example (non interrupt support) > - | > diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > index af2ff930646a..6d65a3cf2af2 100644 > --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > @@ -68,6 +68,8 @@ patternProperties: > - nvmem-cells > - nvmem-cell-names > > + additionalProperties: false > + > required: > - compatible > - reg > @@ -79,6 +81,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: false > + > examples: > - | > ap_thm0: thermal@32200000 { > diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > index a832d427e9d5..6278ccf16f3f 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > @@ -44,6 +44,8 @@ properties: > required: > - '#cooling-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/thermal/thermal.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > index 3ec9cc87ec50..164f71598c59 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > @@ -218,6 +218,8 @@ patternProperties: > - trips > additionalProperties: false > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > index c532b60b9c63..8615353f69b4 100644 > --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > @@ -36,6 +36,8 @@ required: > - interrupts > - clocks > > +additionalProperties: false > + > examples: > - | > ttc0: ttc0@f8001000 { > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > index 196589c93373..e60e590dbe12 100644 > --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > @@ -155,6 +155,8 @@ allOf: > clock-names: > maxItems: 4 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > index dac10848dd7f..2cf525d21e05 100644 > --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > @@ -121,6 +121,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-sdm845.h> > diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > index 484fc1091d7c..388245b91a55 100644 > --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > @@ -46,6 +46,22 @@ properties: > VBUS pin of the SoC via a 1/3 voltage divider. > type: boolean > > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + '#address-cells': > + const: 2 > + > + '#size-cells': > + const: 2 > + > +patternProperties: > + "^usb@": > + type: object > + > required: > - compatible > - reg > @@ -53,6 +69,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/soc/ti,sci_pm_domain.h> >
On Fri, Oct 02, 2020 at 06:41:43PM -0500, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. For USB: Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Fri, Oct 02, 2020 at 06:41:43PM -0500, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 2 ++ > .../arm/mediatek/mediatek,pericfg.yaml | 2 ++ > .../devicetree/bindings/arm/pmu.yaml | 2 ++ > .../devicetree/bindings/arm/primecell.yaml | 3 +++ > .../bindings/arm/samsung/sysreg.yaml | 2 ++ > .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 ++ > .../bindings/bus/mti,mips-cdmm.yaml | 2 ++ > .../bus/socionext,uniphier-system-bus.yaml | 7 +++++++ > .../bindings/clock/arm,syscon-icst.yaml | 2 ++ > .../bindings/clock/idt,versaclock5.yaml | 20 ++++++++++--------- > .../bindings/clock/imx6q-clock.yaml | 2 ++ > .../bindings/clock/imx6sl-clock.yaml | 2 ++ > .../bindings/clock/imx6sll-clock.yaml | 2 ++ > .../bindings/clock/imx6sx-clock.yaml | 2 ++ > .../bindings/clock/imx6ul-clock.yaml | 2 ++ > .../bindings/clock/intel,cgu-lgm.yaml | 2 ++ > .../bindings/clock/qcom,gcc-sm8250.yaml | 2 ++ > .../bindings/clock/sprd,sc9863a-clk.yaml | 2 ++ > .../bindings/clock/ti,am654-ehrpwm-tbclk.yaml | 2 ++ > .../bindings/display/bridge/ite,it6505.yaml | 5 +++++ > .../bindings/display/bridge/lvds-codec.yaml | 3 +++ > .../devicetree/bindings/display/msm/gmu.yaml | 2 ++ > .../devicetree/bindings/edac/dmc-520.yaml | 2 ++ > .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 2 ++ > .../gpio/socionext,uniphier-gpio.yaml | 2 ++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 ++ > .../devicetree/bindings/hwmon/adt7475.yaml | 2 ++ > .../bindings/iio/accel/kionix,kxsd9.yaml | 4 ++++ > .../bindings/iio/adc/maxim,max1238.yaml | 2 ++ > .../bindings/iio/adc/maxim,max1363.yaml | 2 ++ > .../bindings/iio/adc/qcom,spmi-vadc.yaml | 4 ++++ > .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 ++ > .../bindings/iio/adc/ti,ads8688.yaml | 4 ++++ > .../bindings/iio/amplifiers/adi,hmc425a.yaml | 2 ++ > .../bindings/iio/imu/invensense,icm42600.yaml | 6 ++++++ > .../bindings/iio/light/amstaos,tsl2563.yaml | 2 ++ > .../bindings/iio/light/dynaimage,al3010.yaml | 2 ++ > .../bindings/iio/light/dynaimage,al3320a.yaml | 2 ++ > .../bindings/iio/light/sharp,gp2ap002.yaml | 2 ++ > .../iio/magnetometer/asahi-kasei,ak8975.yaml | 2 ++ > .../iio/proximity/vishay,vcnl3020.yaml | 2 ++ > .../interrupt-controller/ingenic,intc.yaml | 2 ++ > .../loongson,pch-msi.yaml | 2 ++ > .../loongson,pch-pic.yaml | 2 ++ > .../devicetree/bindings/ipmi/ipmi-smic.yaml | 2 ++ > .../devicetree/bindings/leds/leds-lp55xx.yaml | 8 ++++++++ > .../bindings/media/i2c/chrontel,ch7322.yaml | 2 ++ > .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 2 ++ > .../bindings/media/nxp,imx8mq-vpu.yaml | 2 ++ > .../bindings/media/qcom,msm8916-venus.yaml | 2 ++ > .../bindings/media/qcom,msm8996-venus.yaml | 2 ++ > .../bindings/media/qcom,sc7180-venus.yaml | 2 ++ > .../bindings/media/qcom,sdm845-venus-v2.yaml | 2 ++ > .../bindings/media/qcom,sdm845-venus.yaml | 2 ++ > .../bindings/memory-controllers/fsl/mmdc.yaml | 2 ++ > .../memory-controllers/st,stm32-fmc2-ebi.yaml | 2 ++ > .../bindings/mfd/gateworks-gsc.yaml | 2 ++ > .../bindings/mfd/xylon,logicvc.yaml | 14 +++++++++++-- > .../bindings/mips/ingenic/ingenic,cpu.yaml | 6 ++++-- > .../bindings/mips/loongson/rs780e-acpi.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-emmc.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++ > .../devicetree/bindings/net/qcom,ipa.yaml | 2 ++ > .../bindings/net/realtek-bluetooth.yaml | 4 +++- > .../net/wireless/microchip,wilc1000.yaml | 4 ++++ > .../devicetree/bindings/pci/rcar-pci-ep.yaml | 2 ++ > .../phy/amlogic,meson-g12a-usb2-phy.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 2 ++ > .../bindings/phy/qcom,qusb2-phy.yaml | 1 + > .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 2 ++ > .../bindings/pinctrl/cirrus,lochnagar.yaml | 2 ++ > .../pinctrl/socionext,uniphier-pinctrl.yaml | 2 ++ > .../power/amlogic,meson-sec-pwrc.yaml | 2 ++ > .../bindings/power/domain-idle-state.yaml | 2 ++ > .../bindings/power/mti,mips-cpc.yaml | 2 ++ > .../bindings/power/supply/cw2015_battery.yaml | 2 ++ > .../bindings/power/supply/rohm,bd99954.yaml | 8 ++++++++ > .../bindings/regulator/silergy,sy8827n.yaml | 2 ++ > .../bindings/remoteproc/qcom,pil-info.yaml | 2 ++ > .../bindings/serial/samsung_uart.yaml | 2 ++ > .../serial/socionext,uniphier-uart.yaml | 2 ++ > .../devicetree/bindings/serial/sprd-uart.yaml | 2 ++ > .../bindings/soc/qcom/qcom,geni-se.yaml | 1 + > .../bindings/sound/amlogic,g12a-toacodec.yaml | 2 ++ > .../bindings/sound/amlogic,gx-sound-card.yaml | 2 ++ > .../bindings/sound/amlogic,t9015.yaml | 2 ++ > .../bindings/sound/cirrus,cs42l51.yaml | 2 ++ > .../devicetree/bindings/sound/fsl,easrc.yaml | 2 ++ > .../bindings/sound/intel,keembay-i2s.yaml | 2 ++ > .../bindings/sound/nvidia,tegra186-dspk.yaml | 2 ++ > .../sound/nvidia,tegra210-admaif.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-dmic.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-i2s.yaml | 2 ++ > .../bindings/sound/rockchip,rk3328-codec.yaml | 2 ++ > .../bindings/sound/tlv320adcx140.yaml | 2 ++ > .../bindings/thermal/rcar-thermal.yaml | 5 +++++ > .../bindings/thermal/sprd-thermal.yaml | 4 ++++ > .../bindings/thermal/thermal-idle.yaml | 2 ++ > .../bindings/thermal/thermal-zones.yaml | 2 ++ > .../devicetree/bindings/timer/cdns,ttc.yaml | 2 ++ > .../bindings/usb/nvidia,tegra-xudc.yaml | 2 ++ > .../devicetree/bindings/usb/qcom,dwc3.yaml | 2 ++ > .../devicetree/bindings/usb/ti,j721e-usb.yaml | 18 +++++++++++++++++ > 105 files changed, 285 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > index 6834f5e8df5f..9fdb319dcf19 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > @@ -54,6 +54,8 @@ required: > - compatible > - mboxes > > +additionalProperties: false > + > examples: > - | > firmware { > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > index 1af30174b2d0..8723dfe34bab 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml > @@ -47,6 +47,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > pericfg@10003000 { > diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml > index 97df36d301c9..693ef3f185a8 100644 > --- a/Documentation/devicetree/bindings/arm/pmu.yaml > +++ b/Documentation/devicetree/bindings/arm/pmu.yaml > @@ -93,4 +93,6 @@ properties: > required: > - compatible > > +additionalProperties: false > + > ... > diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml > index 5aae37f1c563..e15fe00aafb2 100644 > --- a/Documentation/devicetree/bindings/arm/primecell.yaml > +++ b/Documentation/devicetree/bindings/arm/primecell.yaml > @@ -33,4 +33,7 @@ properties: > contains: > const: apb_pclk > additionalItems: true > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > index 3b7811804cb4..2ac789058eee 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml > @@ -32,6 +32,8 @@ properties: > reg: > maxItems: 1 > > +additionalProperties: false > + > examples: > - | > syscon@10010000 { > diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > index b71a20af5f70..43fd2f8927d0 100644 > --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml > @@ -308,6 +308,8 @@ required: > - clocks > - '#clock-cells' > > +additionalProperties: false > + > dependencies: > "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] > "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] > diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > index 9cc2d5f1beef..6a7b26b049f1 100644 > --- a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > cdmm@1bde8000 { > diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > index a0c6c5d2b70f..49df13fc2f89 100644 > --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml > @@ -57,6 +57,11 @@ properties: > "ranges" property should provide a "reasonable" default that is known to > work. The software should initialize the bus controller according to it. > > +patternProperties: > + "^.*@[1-5],[1-9a-f][0-9a-f]+$": > + description: Devices attached to chip selects > + type: object > + > required: > - compatible > - reg > @@ -64,6 +69,8 @@ required: > - "#size-cells" > - ranges > > +additionalProperties: false > + > examples: > - | > // In this example, > diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > index 444aeea27db8..eb241587efd1 100644 > --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml > @@ -89,6 +89,8 @@ required: > - compatible > - clocks > > +additionalProperties: false > + > examples: > - | > vco1: clock { > diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > index 28c6461b9a9a..2ac1131fd922 100644 > --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > @@ -50,6 +50,15 @@ properties: > '#clock-cells': > const: 1 > > + clock-names: > + minItems: 1 > + maxItems: 2 > + items: > + enum: [ xin, clkin ] > + clocks: > + minItems: 1 > + maxItems: 2 > + > patternProperties: > "^OUT[1-4]$": > type: object > @@ -93,19 +102,12 @@ allOf: > maxItems: 1 > else: > # Devices without builtin crystal > - properties: > - clock-names: > - minItems: 1 > - maxItems: 2 > - items: > - enum: [ xin, clkin ] > - clocks: > - minItems: 1 > - maxItems: 2 > required: > - clock-names > - clocks > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clk/versaclock.h> > diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > index 92a8e545e212..4f4637eddb8b 100644 > --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml > @@ -57,6 +57,8 @@ required: > - interrupts > - '#clock-cells' > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > index c97bf95b4150..b83c8f43d664 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml > @@ -33,6 +33,8 @@ required: > - interrupts > - '#clock-cells' > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > index de48924be191..484894a4b23f 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml > @@ -49,6 +49,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > index e50cddee43c3..e6c795657c24 100644 > --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml > @@ -53,6 +53,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > index 36ce7667c972..6a51a3f51cd9 100644 > --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml > @@ -49,6 +49,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > # Clock Control Module node: > - | > diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > index 6dc1414bfb7f..f3e1a700a2ca 100644 > --- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml > @@ -33,6 +33,8 @@ required: > - reg > - '#clock-cells' > > +additionalProperties: false > + > examples: > - | > cgu: clock-controller@e0200000 { > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > index a5766ff89082..80bd6caf5bc9 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml > @@ -56,6 +56,8 @@ required: > - '#reset-cells' > - '#power-domain-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,rpmh.h> > diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > index c6d091518650..4069e09cb62d 100644 > --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml > @@ -73,6 +73,8 @@ else: > The 'reg' property for the clock node is also required if there is a sub > range of registers for the clocks. > > +additionalProperties: false > + > examples: > - | > ap_clk: clock-controller@21500000 { > diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > index 869b18ac88d7..6b419a9878f3 100644 > --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml > @@ -26,6 +26,8 @@ required: > - "#clock-cells" > - reg > > +additionalProperties: false > + > examples: > - | > ehrpwm_tbclk: syscon@4140 { > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index 2c500166c65d..efbb3d0117dc 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -31,6 +31,9 @@ properties: > compatible: > const: ite,it6505 > > + reg: > + maxItems: 1 > + > ovdd-supply: > maxItems: 1 > description: I/O voltage > @@ -63,6 +66,8 @@ required: > - reset-gpios > - extcon > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > index 68951d56ebba..e8fa8e901c9f 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -83,6 +83,9 @@ required: > - compatible > - ports > > +additionalProperties: false > + > + > examples: > - | > lvds-encoder { > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 53056dd02597..fe55611d2603 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -89,6 +89,8 @@ required: > - iommus > - operating-points-v2 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gpucc-sdm845.h> > diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml > index 9272d2bd8634..3b6842e92d1b 100644 > --- a/Documentation/devicetree/bindings/edac/dmc-520.yaml > +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml > @@ -49,6 +49,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: false > + > examples: > - | > dmc0: dmc@200000 { > diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > index b26d4b4be743..e2ca0b000471 100644 > --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml > @@ -28,6 +28,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > fsi2spi@1c00 { > diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > index c58ff9a94f45..1a54db04f29d 100644 > --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml > @@ -64,6 +64,8 @@ required: > - gpio-ranges > - socionext,interrupt-ranges > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > index 7898b9dba5a5..6747b870f297 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -44,6 +44,8 @@ required: > - interrupts > - pulses-per-revolution > > +additionalProperties: false > + > examples: > - | > fpga_axi: fpga-axi { > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > index dfa821c0aacc..ad0ec9f35bd8 100644 > --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > @@ -65,6 +65,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > index d61ab4fa3d71..390b87242fcb 100644 > --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml > @@ -29,10 +29,14 @@ properties: > mount-matrix: > description: an optional 3x3 mounting rotation matrix. > > + spi-max-frequency: true > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > # include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > index cccd3033a55b..50bcd72ac9d6 100644 > --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml > @@ -62,6 +62,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > index 48377549c39a..e04f09f35601 100644 > --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml > @@ -36,6 +36,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > index 0ca992465a21..7f4f827c57a7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > @@ -48,6 +48,8 @@ properties: > description: > End of conversion interrupt. > > + io-channel-ranges: true > + > required: > - compatible > - reg > @@ -232,6 +234,8 @@ allOf: > enum: [ 1, 2, 4, 8, 16 ] > default: 1 > > +additionalProperties: false > + > examples: > - | > spmi_bus { > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index cc3c8ea6a894..16d76482b4ff 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -107,6 +107,8 @@ allOf: > items: > - const: adc > > +additionalProperties: false > + > examples: > - | > adc: adc@12d10000 { > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > index 97fe6cbb2efa..a0af4b24877f 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml > @@ -25,10 +25,14 @@ properties: > description: Optional external reference. If not supplied, assume > REFSEL input tied low to enable the internal reference. > > + spi-max-frequency: true > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > spi { > diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > index 5342360e96b1..a557761d8016 100644 > --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > @@ -33,6 +33,8 @@ required: > - compatible > - ctrl-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > index abd8d25e1136..4c1c083d0e92 100644 > --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > @@ -47,11 +47,17 @@ properties: > vddio-supply: > description: Regulator that provides power to the bus > > + spi-max-frequency: true > + spi-cpha: true > + spi-cpol: true > + > required: > - compatible > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > index e201a06d8fdc..60e76bc035a5 100644 > --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml > @@ -32,6 +32,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > index f671edda6641..a3a979553e32 100644 > --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > index 497300239d93..8249be99cff9 100644 > --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > index 12aa16f24772..f8a932be0d10 100644 > --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml > @@ -61,6 +61,8 @@ required: > - sharp,proximity-far-hysteresis > - sharp,proximity-close-hysteresis > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > index f0b336ac39c9..a25590a16ba7 100644 > --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml > @@ -55,6 +55,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > index 51dba64037f6..fbd3a2e32280 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml > @@ -47,6 +47,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > index 02a3cf470518..0a046be8d1cd 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml > @@ -49,6 +49,8 @@ required: > - "#interrupt-cells" > - interrupt-controller > > +additionalProperties: false > + > examples: > - | > intc: interrupt-controller@10001000 { > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > index 1b256d9dd92a..1f6fd73d4624 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml > @@ -46,6 +46,8 @@ required: > - loongson,msi-base-vec > - loongson,msi-num-vecs > > +additionalProperties: true #fixme > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > index a6dcbb2971a9..fdd6a38a31db 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml > @@ -41,6 +41,8 @@ required: > - interrupt-controller > - '#interrupt-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > index 58fa76ee6176..898e3267893a 100644 > --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml > @@ -49,6 +49,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > smic@fff3a000 { For IPMI: Reviewd-by: Corey Minyard <cminyard@mvista.com> > diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > index b1bb3feb0f4d..cd877e817ad1 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml > @@ -58,6 +58,12 @@ properties: > - 2 # D1~6 with VOUT, D7~9 with VDD > - 3 # D1~9 are connected to VOUT > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > patternProperties: > "(^led@[0-9a-f]$|led)": > type: object > @@ -98,6 +104,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/leds/common.h> > diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > index daa2869377c5..63e5b89d2e0b 100644 > --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml > @@ -49,6 +49,8 @@ required: > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > index 107c862a7fc7..3dc06c628e64 100644 > --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml > @@ -119,6 +119,8 @@ required: > - reg > - port > > +additionalProperties: false > + > examples: > - | > i2c@e66d8000 { > diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > index a2d1cd77c1e2..762be3f96ce9 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > @@ -55,6 +55,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx8mq-clock.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > index f9606df02d70..59ab16ad12f1 100644 > --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml > @@ -92,6 +92,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > index fa0dc6c47f1d..199f45217b4a 100644 > --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml > @@ -119,6 +119,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > index 55f2d67ae34e..3cec6dae1139 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml > @@ -108,6 +108,8 @@ required: > - video-decoder > - video-encoder > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > index 157dff8057e9..55f5d439fa61 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml > @@ -103,6 +103,8 @@ required: > - video-core0 > - video-core1 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > index 084e45e2df62..680f37726fdf 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml > @@ -120,6 +120,8 @@ required: > - video-core0 > - video-core1 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > index 68484136a510..71547eee9919 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml > @@ -33,6 +33,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx6qdl-clock.h> > diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > index 70eaf739036b..cba74205846a 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml > @@ -194,6 +194,8 @@ required: > - clocks > - ranges > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > index 9b6eb50606e8..95e47f317ed2 100644 > --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml > @@ -144,6 +144,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > index abc9937506e0..8a1a6625c782 100644 > --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > @@ -26,6 +26,12 @@ properties: > reg: > maxItems: 1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > select: > properties: > compatible: > @@ -36,15 +42,19 @@ select: > required: > - compatible > > +patternProperties: > + "^gpio@[0-9a-f]+$": > + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# > + > required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > logicvc: logicvc@43c00000 { > compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; > reg = <0x43c00000 0x6000>; > - #address-cells = <1>; > - #size-cells = <1>; > }; > diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > index 16fa03d65ad5..6df1a9470d8f 100644 > --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > +++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml > @@ -32,12 +32,16 @@ properties: > clocks: > maxItems: 1 > > + device_type: true > + > required: > - device_type > - compatible > - reg > - clocks > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/jz4780-cgu.h> > @@ -52,7 +56,6 @@ examples: > reg = <0>; > > clocks = <&cgu JZ4780_CLK_CPU>; > - clock-names = "cpu"; > }; > > cpu1: cpu@1 { > @@ -61,7 +64,6 @@ examples: > reg = <1>; > > clocks = <&cgu JZ4780_CLK_CORE1>; > - clock-names = "cpu"; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > index d317897e1115..7c0f9022202c 100644 > --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml > @@ -23,6 +23,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > isa@0 { > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > index 77f746f57284..1fc7e620f328 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml > @@ -36,6 +36,8 @@ required: > - compatible > - reset-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > index a68820d31d50..e0169a285aa2 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml > @@ -28,6 +28,8 @@ required: > - powerdown-gpios > - reset-gpios > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > index 449215444723..06bbd8590544 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > @@ -50,6 +50,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > index 8594f114f016..4d8464b2676d 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml > @@ -144,6 +144,8 @@ oneOf: > - required: > - memory-region > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > index c488f24ed38f..4f485df69ac3 100644 > --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml > @@ -37,6 +37,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > @@ -49,6 +51,6 @@ examples: > bluetooth { > compatible = "realtek,rtl8723bs-bt"; > device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ > - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ > }; > }; > diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > index 2c320eb2a8c4..6c35682377e6 100644 > --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > @@ -18,6 +18,8 @@ properties: > compatible: > const: microchip,wilc1000 > > + reg: true > + > spi-max-frequency: true > > interrupts: > @@ -34,6 +36,8 @@ required: > - compatible > - interrupts > > +additionalProperties: false > + > examples: > - | > spi { > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > index aa483c7f27fd..53d5952b7e57 100644 > --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml > @@ -55,6 +55,8 @@ required: > - clock-names > - max-functions > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> > diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > index 0d2557bb0bcc..399ebde45409 100644 > --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml > @@ -63,6 +63,8 @@ then: > required: > - power-domains > > +additionalProperties: false > + > examples: > - | > phy@36000 { > diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > index 23887ebe08fd..17f132ce5516 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > @@ -42,6 +42,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq806x.h> > diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > index fa30c24b4405..17fd7f6b83bb 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > @@ -60,6 +60,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq806x.h> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > index ccda92859eca..d457fb6a4779 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > @@ -158,6 +158,7 @@ required: > - vdda-phy-dpdm-supply > - resets > > +additionalProperties: false > > examples: > - | > diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > index 1118fe69b611..3e7191b168fb 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > @@ -36,6 +36,8 @@ required: > - reset-names > - "#phy-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-ipq4019.h> > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > index 420d74856032..a07dd197176a 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml > @@ -188,3 +188,5 @@ required: > - gpio-ranges > - pinctrl-0 > - pinctrl-names > + > +additionalProperties: false > diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > index f8a93d8680f9..502480a19f49 100644 > --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml > @@ -28,6 +28,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. > diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > index bc4e037f3f73..5dae04d2936c 100644 > --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml > @@ -27,6 +27,8 @@ required: > - compatible > - "#power-domain-cells" > > +additionalProperties: false > + > examples: > - | > secure-monitor { > diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml > index dfba1af9abe5..6a12efdf436a 100644 > --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml > +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml > @@ -50,6 +50,8 @@ patternProperties: > - exit-latency-us > - min-residency-us > > +additionalProperties: false > + > examples: > - | > > diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > index ccdeaece169e..be447ccfdcb8 100644 > --- a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml > @@ -26,6 +26,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > cpc@1bde0000 { > diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > index 2036977ecc2f..ee92e6a076ac 100644 > --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml > @@ -52,6 +52,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > index 7e0f73a898c7..9852d2febf65 100644 > --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml > @@ -112,6 +112,12 @@ properties: > # threshold, and the current is below this setting (7 in above chart) > # See also Documentation/devicetree/bindings/power/supply/battery.txt > > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > monitored-battery: > description: > phandle of battery characteristics devicetree node > @@ -137,6 +143,8 @@ properties: > required: > - compatible > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > index 15983cdc7c28..b222adabc7b4 100644 > --- a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml > @@ -31,6 +31,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > i2c { > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > index 87c52316ddbd..9282837d64ba 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > @@ -25,6 +25,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > imem@146bf000 { > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > index 96414ac65d06..21ee627b2ced 100644 > --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml > @@ -68,6 +68,8 @@ required: > - interrupts > - reg > > +additionalProperties: false > + > allOf: > - if: > properties: > diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > index 09a30300850c..d490c7c4b967 100644 > --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml > @@ -32,6 +32,8 @@ required: > - interrupts > - clocks > > +additionalProperties: false > + > examples: > - | > aliases { > diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml > index e66b2e92a7fc..09f6283f3cae 100644 > --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml > @@ -56,6 +56,8 @@ required: > - reg > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > index bd04fdb57414..84671950ca0d 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > @@ -173,6 +173,7 @@ patternProperties: > - compatible > - interrupts > > +additionalProperties: false > > examples: > - | > diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > index b4b3828c40af..3c3891d17238 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml > @@ -37,6 +37,8 @@ required: > - reg > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> > diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > index fb374c659be1..db61f0731a20 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml > @@ -84,6 +84,8 @@ required: > - model > - dai-link-0 > > +additionalProperties: false > + > examples: > - | > sound { > diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > index 04014e658c90..c7613ea728d4 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml > @@ -42,6 +42,8 @@ required: > - clock-names > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/g12a-clkc.h> > diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > index 5bcb643c288f..0d87e2c86a42 100644 > --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml > @@ -46,6 +46,8 @@ required: > - reg > - "#sound-dai-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > index 32d547af9ce7..bdde68a1059c 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml > @@ -74,6 +74,8 @@ required: > - fsl,asrc-rate > - fsl,asrc-format > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/imx8mn-clock.h> > diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > index 2e0bbc1c868a..6cbdd8857ea2 100644 > --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml > @@ -52,6 +52,8 @@ required: > - clock-names > - interrupts > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > index 2f2fcffa65cb..ed2fb32fcdd4 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > @@ -64,6 +64,8 @@ required: > - assigned-clock-parents > - sound-name-prefix > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra186-clock.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > index 41c77f45d2fd..c028b259e822 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > @@ -81,6 +81,8 @@ required: > - dmas > - dma-names > > +additionalProperties: false > + > examples: > - | > admaif@702d0000 { > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > index 8689d9f18c11..2a3207b550e7 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > @@ -64,6 +64,8 @@ required: > - assigned-clocks > - assigned-clock-parents > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > index 9bbf18153d63..dfc1bf7b7722 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > @@ -82,6 +82,8 @@ required: > - assigned-clocks > - assigned-clock-parents > > +additionalProperties: false > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > index 5b85ad5e4834..75b3b33b5f1f 100644 > --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml > @@ -53,6 +53,8 @@ required: > - rockchip,grf > - "#sound-dai-cells" > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > index f578f17f3e04..1bff53d37118 100644 > --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml > @@ -138,6 +138,8 @@ required: > - compatible > - reg > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > index 0994693d240f..7e9557ac0e4a 100644 > --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml > @@ -59,6 +59,9 @@ properties: > resets: > maxItems: 1 > > + "#thermal-sensor-cells": > + const: 0 > + > if: > properties: > compatible: > @@ -79,6 +82,8 @@ else: > - power-domains > - resets > > +additionalProperties: false > + > examples: > # Example (non interrupt support) > - | > diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > index af2ff930646a..6d65a3cf2af2 100644 > --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml > @@ -68,6 +68,8 @@ patternProperties: > - nvmem-cells > - nvmem-cell-names > > + additionalProperties: false > + > required: > - compatible > - reg > @@ -79,6 +81,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: false > + > examples: > - | > ap_thm0: thermal@32200000 { > diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > index a832d427e9d5..6278ccf16f3f 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml > @@ -44,6 +44,8 @@ properties: > required: > - '#cooling-cells' > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/thermal/thermal.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > index 3ec9cc87ec50..164f71598c59 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > @@ -218,6 +218,8 @@ patternProperties: > - trips > additionalProperties: false > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > index c532b60b9c63..8615353f69b4 100644 > --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml > @@ -36,6 +36,8 @@ required: > - interrupts > - clocks > > +additionalProperties: false > + > examples: > - | > ttc0: ttc0@f8001000 { > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > index 196589c93373..e60e590dbe12 100644 > --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml > @@ -155,6 +155,8 @@ allOf: > clock-names: > maxItems: 4 > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > index dac10848dd7f..2cf525d21e05 100644 > --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > @@ -121,6 +121,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-sdm845.h> > diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > index 484fc1091d7c..388245b91a55 100644 > --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml > @@ -46,6 +46,22 @@ properties: > VBUS pin of the SoC via a 1/3 voltage divider. > type: boolean > > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + '#address-cells': > + const: 2 > + > + '#size-cells': > + const: 2 > + > +patternProperties: > + "^usb@": > + type: object > + > required: > - compatible > - reg > @@ -53,6 +69,8 @@ required: > - clocks > - clock-names > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/soc/ti,sci_pm_domain.h> > -- > 2.25.1 >
On 02-10-20, 18:41, Rob Herring wrote: > .../phy/amlogic,meson-g12a-usb2-phy.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 2 ++ > .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 2 ++ > .../bindings/phy/qcom,qusb2-phy.yaml | 1 + > .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 2 ++ For phy changes: Acked-By: Vinod Koul <vkoul@kernel.org>
On Fri, 02 Oct 2020, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. [...] > .../bindings/mfd/gateworks-gsc.yaml | 2 ++ > .../bindings/mfd/xylon,logicvc.yaml | 14 +++++++++++-- Acked-by: Lee Jones <lee.jones@linaro.org>
On Sat, 3 Oct 2020 at 01:41, Rob Herring <robh@kernel.org> wrote: > > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. > [...] > .../bindings/mmc/mmc-pwrseq-emmc.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 ++ > .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe
On Fri, 2 Oct 2020 18:41:43 -0500 Rob Herring <robh@kernel.org> wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Baolin Wang <baolin.wang7@gmail.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-spi@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-hwmon@vger.kernel.org > Cc: linux-iio@vger.kernel.org > Cc: openipmi-developer@lists.sourceforge.net > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: linux-rockchip@lists.infradead.org > Cc: linux-stm32@st-md-mailman.stormreply.com > Cc: linux-mips@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: linux-serial@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- Hi Rob, Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio However, one of these made me wonder if the binding was simply wrong... (definitely highlights why we should have additionalProperties: false where ever possible). ... > diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > index abd8d25e1136..4c1c083d0e92 100644 > --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml > @@ -47,11 +47,17 @@ properties: > vddio-supply: > description: Regulator that provides power to the bus > > + spi-max-frequency: true > + spi-cpha: true > + spi-cpol: true It isn't completely unheard of for a device to operate in multiple SPI modes, but it does seem to be fairly unusual. I took a look at the datasheet and at least from the provided timing diagrams, these are both required in SPI mode. http://invensense.tdk.com/wp-content/uploads/2020/09/DS-000292-ICM-42605-v1.5.pdf That doesn't make the binding wrong as such, but we could be tighter in checking this! I'll add this to my list to take a closer look at sometime soonish. Thanks. Jonathan > + > required: > - compatible > - reg > - interrupts > > +additionalProperties: false > + > examples: > - |
On Fri, Oct 02, 2020 at 06:41:43PM -0500, Rob Herring wrote: [...] > .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 ++ [...] > .../bindings/sound/nvidia,tegra186-dspk.yaml | 2 ++ > .../sound/nvidia,tegra210-admaif.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-dmic.yaml | 2 ++ > .../bindings/sound/nvidia,tegra210-i2s.yaml | 2 ++ [...] > .../bindings/usb/nvidia,tegra-xudc.yaml | 2 ++ [...] Acked-by: Thierry Reding <treding@nvidia.com>
On Fri, Oct 02, 2020 at 06:41:43PM -0500, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. Acked-by: Mark Brown <broonie@kernel.org>
Hi! > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. for leds: Acked-by: Pavel Machek <pavel@ucw.cz> I assume you apply it..? Pavel
On Fri, Oct 02, 2020 at 06:41:43PM -0500, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > > I'll take this thru the DT tree. > > [...] > .../bindings/power/supply/cw2015_battery.yaml | 2 ++ > .../bindings/power/supply/rohm,bd99954.yaml | 8 ++++++++ > [...] Acked-by: Sebastian Reichel <sre@kernel.org> -- Sebastian
On Fri, 02 Oct 2020, Rob Herring wrote: > Another round of wack-a-mole. The json-schema default is additional > unknown properties are allowed, but for DT all properties should be > defined. Acked-by: Lee Jones <lee.jones@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 6834f5e8df5f..9fdb319dcf19 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -54,6 +54,8 @@ required: - compatible - mboxes +additionalProperties: false + examples: - | firmware { diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 1af30174b2d0..8723dfe34bab 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | pericfg@10003000 { diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 97df36d301c9..693ef3f185a8 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -93,4 +93,6 @@ properties: required: - compatible +additionalProperties: false + ... diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml index 5aae37f1c563..e15fe00aafb2 100644 --- a/Documentation/devicetree/bindings/arm/primecell.yaml +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -33,4 +33,7 @@ properties: contains: const: apb_pclk additionalItems: true + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml index 3b7811804cb4..2ac789058eee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml @@ -32,6 +32,8 @@ properties: reg: maxItems: 1 +additionalProperties: false + examples: - | syscon@10010000 { diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index b71a20af5f70..43fd2f8927d0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -308,6 +308,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + dependencies: "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml index 9cc2d5f1beef..6a7b26b049f1 100644 --- a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cdmm@1bde8000 { diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index a0c6c5d2b70f..49df13fc2f89 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -57,6 +57,11 @@ properties: "ranges" property should provide a "reasonable" default that is known to work. The software should initialize the bus controller according to it. +patternProperties: + "^.*@[1-5],[1-9a-f][0-9a-f]+$": + description: Devices attached to chip selects + type: object + required: - compatible - reg @@ -64,6 +69,8 @@ required: - "#size-cells" - ranges +additionalProperties: false + examples: - | // In this example, diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index 444aeea27db8..eb241587efd1 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -89,6 +89,8 @@ required: - compatible - clocks +additionalProperties: false + examples: - | vco1: clock { diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index 28c6461b9a9a..2ac1131fd922 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -50,6 +50,15 @@ properties: '#clock-cells': const: 1 + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + patternProperties: "^OUT[1-4]$": type: object @@ -93,19 +102,12 @@ allOf: maxItems: 1 else: # Devices without builtin crystal - properties: - clock-names: - minItems: 1 - maxItems: 2 - items: - enum: [ xin, clkin ] - clocks: - minItems: 1 - maxItems: 2 required: - clock-names - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clk/versaclock.h> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index 92a8e545e212..4f4637eddb8b 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -57,6 +57,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index c97bf95b4150..b83c8f43d664 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -33,6 +33,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index de48924be191..484894a4b23f 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index e50cddee43c3..e6c795657c24 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -53,6 +53,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index 36ce7667c972..6a51a3f51cd9 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml index 6dc1414bfb7f..f3e1a700a2ca 100644 --- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml @@ -33,6 +33,8 @@ required: - reg - '#clock-cells' +additionalProperties: false + examples: - | cgu: clock-controller@e0200000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index a5766ff89082..80bd6caf5bc9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index c6d091518650..4069e09cb62d 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -73,6 +73,8 @@ else: The 'reg' property for the clock node is also required if there is a sub range of registers for the clocks. +additionalProperties: false + examples: - | ap_clk: clock-controller@21500000 { diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 869b18ac88d7..6b419a9878f3 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -26,6 +26,8 @@ required: - "#clock-cells" - reg +additionalProperties: false + examples: - | ehrpwm_tbclk: syscon@4140 { diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index 2c500166c65d..efbb3d0117dc 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -31,6 +31,9 @@ properties: compatible: const: ite,it6505 + reg: + maxItems: 1 + ovdd-supply: maxItems: 1 description: I/O voltage @@ -63,6 +66,8 @@ required: - reset-gpios - extcon +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 68951d56ebba..e8fa8e901c9f 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -83,6 +83,9 @@ required: - compatible - ports +additionalProperties: false + + examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 53056dd02597..fe55611d2603 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -89,6 +89,8 @@ required: - iommus - operating-points-v2 +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml index 9272d2bd8634..3b6842e92d1b 100644 --- a/Documentation/devicetree/bindings/edac/dmc-520.yaml +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml @@ -49,6 +49,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | dmc0: dmc@200000 { diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index b26d4b4be743..e2ca0b000471 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | fsi2spi@1c00 { diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index c58ff9a94f45..1a54db04f29d 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -64,6 +64,8 @@ required: - gpio-ranges - socionext,interrupt-ranges +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 7898b9dba5a5..6747b870f297 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -44,6 +44,8 @@ required: - interrupts - pulses-per-revolution +additionalProperties: false + examples: - | fpga_axi: fpga-axi { diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index dfa821c0aacc..ad0ec9f35bd8 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -65,6 +65,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index d61ab4fa3d71..390b87242fcb 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,10 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | # include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml index cccd3033a55b..50bcd72ac9d6 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -62,6 +62,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml index 48377549c39a..e04f09f35601 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -36,6 +36,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 0ca992465a21..7f4f827c57a7 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -48,6 +48,8 @@ properties: description: End of conversion interrupt. + io-channel-ranges: true + required: - compatible - reg @@ -232,6 +234,8 @@ allOf: enum: [ 1, 2, 4, 8, 16 ] default: 1 +additionalProperties: false + examples: - | spmi_bus { diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index cc3c8ea6a894..16d76482b4ff 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -107,6 +107,8 @@ allOf: items: - const: adc +additionalProperties: false + examples: - | adc: adc@12d10000 { diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index 97fe6cbb2efa..a0af4b24877f 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,10 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 5342360e96b1..a557761d8016 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -33,6 +33,8 @@ required: - compatible - ctrl-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index abd8d25e1136..4c1c083d0e92 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,11 +47,17 @@ properties: vddio-supply: description: Regulator that provides power to the bus + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + required: - compatible - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml index e201a06d8fdc..60e76bc035a5 100644 --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml index f671edda6641..a3a979553e32 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml index 497300239d93..8249be99cff9 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml index 12aa16f24772..f8a932be0d10 100644 --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -61,6 +61,8 @@ required: - sharp,proximity-far-hysteresis - sharp,proximity-close-hysteresis +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index f0b336ac39c9..a25590a16ba7 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -55,6 +55,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml index 51dba64037f6..fbd3a2e32280 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 02a3cf470518..0a046be8d1cd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -49,6 +49,8 @@ required: - "#interrupt-cells" - interrupt-controller +additionalProperties: false + examples: - | intc: interrupt-controller@10001000 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml index 1b256d9dd92a..1f6fd73d4624 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -46,6 +46,8 @@ required: - loongson,msi-base-vec - loongson,msi-num-vecs +additionalProperties: true #fixme + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml index a6dcbb2971a9..fdd6a38a31db 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml @@ -41,6 +41,8 @@ required: - interrupt-controller - '#interrupt-cells' +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index 58fa76ee6176..898e3267893a 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -49,6 +49,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | smic@fff3a000 { diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index b1bb3feb0f4d..cd877e817ad1 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -58,6 +58,12 @@ properties: - 2 # D1~6 with VOUT, D7~9 with VDD - 3 # D1~9 are connected to VOUT + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: "(^led@[0-9a-f]$|led)": type: object @@ -98,6 +104,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/leds/common.h> diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml index daa2869377c5..63e5b89d2e0b 100644 --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -49,6 +49,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml index 107c862a7fc7..3dc06c628e64 100644 --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -119,6 +119,8 @@ required: - reg - port +additionalProperties: false + examples: - | i2c@e66d8000 { diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index a2d1cd77c1e2..762be3f96ce9 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -55,6 +55,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mq-clock.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index f9606df02d70..59ab16ad12f1 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -92,6 +92,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index fa0dc6c47f1d..199f45217b4a 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -119,6 +119,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 55f2d67ae34e..3cec6dae1139 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -108,6 +108,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 157dff8057e9..55f5d439fa61 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -103,6 +103,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 084e45e2df62..680f37726fdf 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -120,6 +120,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index 68484136a510..71547eee9919 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -33,6 +33,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx6qdl-clock.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 70eaf739036b..cba74205846a 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -194,6 +194,8 @@ required: - clocks - ranges +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 9b6eb50606e8..95e47f317ed2 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -144,6 +144,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml index abc9937506e0..8a1a6625c782 100644 --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -26,6 +26,12 @@ properties: reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + select: properties: compatible: @@ -36,15 +42,19 @@ select: required: - compatible +patternProperties: + "^gpio@[0-9a-f]+$": + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# + required: - compatible - reg +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; reg = <0x43c00000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml index 16fa03d65ad5..6df1a9470d8f 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml @@ -32,12 +32,16 @@ properties: clocks: maxItems: 1 + device_type: true + required: - device_type - compatible - reg - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> @@ -52,7 +56,6 @@ examples: reg = <0>; clocks = <&cgu JZ4780_CLK_CPU>; - clock-names = "cpu"; }; cpu1: cpu@1 { @@ -61,7 +64,6 @@ examples: reg = <1>; clocks = <&cgu JZ4780_CLK_CORE1>; - clock-names = "cpu"; }; }; ... diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml index d317897e1115..7c0f9022202c 100644 --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -23,6 +23,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | isa@0 { diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml index 77f746f57284..1fc7e620f328 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml @@ -36,6 +36,8 @@ required: - compatible - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml index a68820d31d50..e0169a285aa2 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml @@ -28,6 +28,8 @@ required: - powerdown-gpios - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 449215444723..06bbd8590544 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -50,6 +50,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8594f114f016..4d8464b2676d 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -144,6 +144,8 @@ oneOf: - required: - memory-region +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index c488f24ed38f..4f485df69ac3 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -37,6 +37,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -49,6 +51,6 @@ examples: bluetooth { compatible = "realtek,rtl8723bs-bt"; device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 2c320eb2a8c4..6c35682377e6 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -18,6 +18,8 @@ properties: compatible: const: microchip,wilc1000 + reg: true + spi-max-frequency: true interrupts: @@ -34,6 +36,8 @@ required: - compatible - interrupts +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml index aa483c7f27fd..53d5952b7e57 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml @@ -55,6 +55,8 @@ required: - clock-names - max-functions +additionalProperties: false + examples: - | #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 0d2557bb0bcc..399ebde45409 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -63,6 +63,8 @@ then: required: - power-domains +additionalProperties: false + examples: - | phy@36000 { diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml index 23887ebe08fd..17f132ce5516 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -42,6 +42,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml index fa30c24b4405..17fd7f6b83bb 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -60,6 +60,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index ccda92859eca..d457fb6a4779 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -158,6 +158,7 @@ required: - vdda-phy-dpdm-supply - resets +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml index 1118fe69b611..3e7191b168fb 100644 --- a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -36,6 +36,8 @@ required: - reset-names - "#phy-cells" +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq4019.h> diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml index 420d74856032..a07dd197176a 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -188,3 +188,5 @@ required: - gpio-ranges - pinctrl-0 - pinctrl-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index f8a93d8680f9..502480a19f49 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -28,6 +28,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index bc4e037f3f73..5dae04d2936c 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -27,6 +27,8 @@ required: - compatible - "#power-domain-cells" +additionalProperties: false + examples: - | secure-monitor { diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml index dfba1af9abe5..6a12efdf436a 100644 --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -50,6 +50,8 @@ patternProperties: - exit-latency-us - min-residency-us +additionalProperties: false + examples: - | diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml index ccdeaece169e..be447ccfdcb8 100644 --- a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cpc@1bde0000 { diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 2036977ecc2f..ee92e6a076ac 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -52,6 +52,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml index 7e0f73a898c7..9852d2febf65 100644 --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -112,6 +112,12 @@ properties: # threshold, and the current is below this setting (7 in above chart) # See also Documentation/devicetree/bindings/power/supply/battery.txt + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + monitored-battery: description: phandle of battery characteristics devicetree node @@ -137,6 +143,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml index 15983cdc7c28..b222adabc7b4 100644 --- a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -31,6 +31,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml index 87c52316ddbd..9282837d64ba 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml @@ -25,6 +25,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | imem@146bf000 { diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 96414ac65d06..21ee627b2ced 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -68,6 +68,8 @@ required: - interrupts - reg +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml index 09a30300850c..d490c7c4b967 100644 --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -32,6 +32,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | aliases { diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index e66b2e92a7fc..09f6283f3cae 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -56,6 +56,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index bd04fdb57414..84671950ca0d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -173,6 +173,7 @@ patternProperties: - compatible - interrupts +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index b4b3828c40af..3c3891d17238 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -37,6 +37,8 @@ required: - reg - resets +additionalProperties: false + examples: - | #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index fb374c659be1..db61f0731a20 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -84,6 +84,8 @@ required: - model - dai-link-0 +additionalProperties: false + examples: - | sound { diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index 04014e658c90..c7613ea728d4 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -42,6 +42,8 @@ required: - clock-names - resets +additionalProperties: false + examples: - | #include <dt-bindings/clock/g12a-clkc.h> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 5bcb643c288f..0d87e2c86a42 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -46,6 +46,8 @@ required: - reg - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index 32d547af9ce7..bdde68a1059c 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -74,6 +74,8 @@ required: - fsl,asrc-rate - fsl,asrc-format +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mn-clock.h> diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 2e0bbc1c868a..6cbdd8857ea2 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -52,6 +52,8 @@ required: - clock-names - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index 2f2fcffa65cb..ed2fb32fcdd4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -64,6 +64,8 @@ required: - assigned-clock-parents - sound-name-prefix +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra186-clock.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index 41c77f45d2fd..c028b259e822 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -81,6 +81,8 @@ required: - dmas - dma-names +additionalProperties: false + examples: - | admaif@702d0000 { diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 8689d9f18c11..2a3207b550e7 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -64,6 +64,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 9bbf18153d63..dfc1bf7b7722 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -82,6 +82,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 5b85ad5e4834..75b3b33b5f1f 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -53,6 +53,8 @@ required: - rockchip,grf - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index f578f17f3e04..1bff53d37118 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -138,6 +138,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 0994693d240f..7e9557ac0e4a 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -59,6 +59,9 @@ properties: resets: maxItems: 1 + "#thermal-sensor-cells": + const: 0 + if: properties: compatible: @@ -79,6 +82,8 @@ else: - power-domains - resets +additionalProperties: false + examples: # Example (non interrupt support) - | diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index af2ff930646a..6d65a3cf2af2 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -68,6 +68,8 @@ patternProperties: - nvmem-cells - nvmem-cell-names + additionalProperties: false + required: - compatible - reg @@ -79,6 +81,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | ap_thm0: thermal@32200000 { diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index a832d427e9d5..6278ccf16f3f 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -44,6 +44,8 @@ properties: required: - '#cooling-cells' +additionalProperties: false + examples: - | #include <dt-bindings/thermal/thermal.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 3ec9cc87ec50..164f71598c59 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -218,6 +218,8 @@ patternProperties: - trips additionalProperties: false +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index c532b60b9c63..8615353f69b4 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -36,6 +36,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | ttc0: ttc0@f8001000 { diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index 196589c93373..e60e590dbe12 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -155,6 +155,8 @@ allOf: clock-names: maxItems: 4 +additionalProperties: false + examples: - | #include <dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index dac10848dd7f..2cf525d21e05 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -121,6 +121,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 484fc1091d7c..388245b91a55 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -46,6 +46,22 @@ properties: VBUS pin of the SoC via a 1/3 voltage divider. type: boolean + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + +patternProperties: + "^usb@": + type: object + required: - compatible - reg @@ -53,6 +69,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h>
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: openipmi-developer@lists.sourceforge.net Cc: linux-leds@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-mips@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- I'll take this thru the DT tree. .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 2 ++ .../arm/mediatek/mediatek,pericfg.yaml | 2 ++ .../devicetree/bindings/arm/pmu.yaml | 2 ++ .../devicetree/bindings/arm/primecell.yaml | 3 +++ .../bindings/arm/samsung/sysreg.yaml | 2 ++ .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 ++ .../bindings/bus/mti,mips-cdmm.yaml | 2 ++ .../bus/socionext,uniphier-system-bus.yaml | 7 +++++++ .../bindings/clock/arm,syscon-icst.yaml | 2 ++ .../bindings/clock/idt,versaclock5.yaml | 20 ++++++++++--------- .../bindings/clock/imx6q-clock.yaml | 2 ++ .../bindings/clock/imx6sl-clock.yaml | 2 ++ .../bindings/clock/imx6sll-clock.yaml | 2 ++ .../bindings/clock/imx6sx-clock.yaml | 2 ++ .../bindings/clock/imx6ul-clock.yaml | 2 ++ .../bindings/clock/intel,cgu-lgm.yaml | 2 ++ .../bindings/clock/qcom,gcc-sm8250.yaml | 2 ++ .../bindings/clock/sprd,sc9863a-clk.yaml | 2 ++ .../bindings/clock/ti,am654-ehrpwm-tbclk.yaml | 2 ++ .../bindings/display/bridge/ite,it6505.yaml | 5 +++++ .../bindings/display/bridge/lvds-codec.yaml | 3 +++ .../devicetree/bindings/display/msm/gmu.yaml | 2 ++ .../devicetree/bindings/edac/dmc-520.yaml | 2 ++ .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 2 ++ .../gpio/socionext,uniphier-gpio.yaml | 2 ++ .../bindings/hwmon/adi,axi-fan-control.yaml | 2 ++ .../devicetree/bindings/hwmon/adt7475.yaml | 2 ++ .../bindings/iio/accel/kionix,kxsd9.yaml | 4 ++++ .../bindings/iio/adc/maxim,max1238.yaml | 2 ++ .../bindings/iio/adc/maxim,max1363.yaml | 2 ++ .../bindings/iio/adc/qcom,spmi-vadc.yaml | 4 ++++ .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 ++ .../bindings/iio/adc/ti,ads8688.yaml | 4 ++++ .../bindings/iio/amplifiers/adi,hmc425a.yaml | 2 ++ .../bindings/iio/imu/invensense,icm42600.yaml | 6 ++++++ .../bindings/iio/light/amstaos,tsl2563.yaml | 2 ++ .../bindings/iio/light/dynaimage,al3010.yaml | 2 ++ .../bindings/iio/light/dynaimage,al3320a.yaml | 2 ++ .../bindings/iio/light/sharp,gp2ap002.yaml | 2 ++ .../iio/magnetometer/asahi-kasei,ak8975.yaml | 2 ++ .../iio/proximity/vishay,vcnl3020.yaml | 2 ++ .../interrupt-controller/ingenic,intc.yaml | 2 ++ .../loongson,pch-msi.yaml | 2 ++ .../loongson,pch-pic.yaml | 2 ++ .../devicetree/bindings/ipmi/ipmi-smic.yaml | 2 ++ .../devicetree/bindings/leds/leds-lp55xx.yaml | 8 ++++++++ .../bindings/media/i2c/chrontel,ch7322.yaml | 2 ++ .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 2 ++ .../bindings/media/nxp,imx8mq-vpu.yaml | 2 ++ .../bindings/media/qcom,msm8916-venus.yaml | 2 ++ .../bindings/media/qcom,msm8996-venus.yaml | 2 ++ .../bindings/media/qcom,sc7180-venus.yaml | 2 ++ .../bindings/media/qcom,sdm845-venus-v2.yaml | 2 ++ .../bindings/media/qcom,sdm845-venus.yaml | 2 ++ .../bindings/memory-controllers/fsl/mmdc.yaml | 2 ++ .../memory-controllers/st,stm32-fmc2-ebi.yaml | 2 ++ .../bindings/mfd/gateworks-gsc.yaml | 2 ++ .../bindings/mfd/xylon,logicvc.yaml | 14 +++++++++++-- .../bindings/mips/ingenic/ingenic,cpu.yaml | 6 ++++-- .../bindings/mips/loongson/rs780e-acpi.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-emmc.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++ .../devicetree/bindings/net/qcom,ipa.yaml | 2 ++ .../bindings/net/realtek-bluetooth.yaml | 4 +++- .../net/wireless/microchip,wilc1000.yaml | 4 ++++ .../devicetree/bindings/pci/rcar-pci-ep.yaml | 2 ++ .../phy/amlogic,meson-g12a-usb2-phy.yaml | 2 ++ .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 2 ++ .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 2 ++ .../bindings/phy/qcom,qusb2-phy.yaml | 1 + .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 2 ++ .../bindings/pinctrl/cirrus,lochnagar.yaml | 2 ++ .../pinctrl/socionext,uniphier-pinctrl.yaml | 2 ++ .../power/amlogic,meson-sec-pwrc.yaml | 2 ++ .../bindings/power/domain-idle-state.yaml | 2 ++ .../bindings/power/mti,mips-cpc.yaml | 2 ++ .../bindings/power/supply/cw2015_battery.yaml | 2 ++ .../bindings/power/supply/rohm,bd99954.yaml | 8 ++++++++ .../bindings/regulator/silergy,sy8827n.yaml | 2 ++ .../bindings/remoteproc/qcom,pil-info.yaml | 2 ++ .../bindings/serial/samsung_uart.yaml | 2 ++ .../serial/socionext,uniphier-uart.yaml | 2 ++ .../devicetree/bindings/serial/sprd-uart.yaml | 2 ++ .../bindings/soc/qcom/qcom,geni-se.yaml | 1 + .../bindings/sound/amlogic,g12a-toacodec.yaml | 2 ++ .../bindings/sound/amlogic,gx-sound-card.yaml | 2 ++ .../bindings/sound/amlogic,t9015.yaml | 2 ++ .../bindings/sound/cirrus,cs42l51.yaml | 2 ++ .../devicetree/bindings/sound/fsl,easrc.yaml | 2 ++ .../bindings/sound/intel,keembay-i2s.yaml | 2 ++ .../bindings/sound/nvidia,tegra186-dspk.yaml | 2 ++ .../sound/nvidia,tegra210-admaif.yaml | 2 ++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 2 ++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 2 ++ .../bindings/sound/rockchip,rk3328-codec.yaml | 2 ++ .../bindings/sound/tlv320adcx140.yaml | 2 ++ .../bindings/thermal/rcar-thermal.yaml | 5 +++++ .../bindings/thermal/sprd-thermal.yaml | 4 ++++ .../bindings/thermal/thermal-idle.yaml | 2 ++ .../bindings/thermal/thermal-zones.yaml | 2 ++ .../devicetree/bindings/timer/cdns,ttc.yaml | 2 ++ .../bindings/usb/nvidia,tegra-xudc.yaml | 2 ++ .../devicetree/bindings/usb/qcom,dwc3.yaml | 2 ++ .../devicetree/bindings/usb/ti,j721e-usb.yaml | 18 +++++++++++++++++ 105 files changed, 285 insertions(+), 14 deletions(-)