diff mbox series

[RFC,1/3] PCI: Add the IDs for Etron EJ168 and EJ188

Message ID 20201004162908.3216898-2-martin.blumenstingl@googlemail.com (mailing list archive)
State Not Applicable, archived
Headers show
Series GPIO support on the Etron EJ168/EJ188/EJ198 xHCI controllers | expand

Commit Message

Martin Blumenstingl Oct. 4, 2020, 4:29 p.m. UTC
Add the vendor ID for Etron Technology, Inc. as well as the device IDs
for the two USB xHCI controllers EJ168 and EJ188.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 include/linux/pci_ids.h | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Linus Walleij Oct. 7, 2020, 9:14 a.m. UTC | #1
On Sun, Oct 4, 2020 at 8:00 PM Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:

> Add the vendor ID for Etron Technology, Inc. as well as the device IDs
> for the two USB xHCI controllers EJ168 and EJ188.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

(...)

>  #define PCI_VENDOR_ID_REDHAT           0x1b36
>
> +#define PCI_VENDOR_ID_ETRON            0x1b6f
> +#define PCI_DEVICE_ID_ETRON_EJ168      0x7023
> +#define PCI_DEVICE_ID_ETRON_EJ188      0x7052

If you're defining that here, I think it should also be
removed in
drivers/usb/host/xhci-pci.c
by including this file instead?

Yours,
Linus Walleij
Martin Blumenstingl Oct. 7, 2020, 7:45 p.m. UTC | #2
Hi Linus,

On Wed, Oct 7, 2020 at 11:14 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Sun, Oct 4, 2020 at 8:00 PM Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
>
> > Add the vendor ID for Etron Technology, Inc. as well as the device IDs
> > for the two USB xHCI controllers EJ168 and EJ188.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> (...)
>
> >  #define PCI_VENDOR_ID_REDHAT           0x1b36
> >
> > +#define PCI_VENDOR_ID_ETRON            0x1b6f
> > +#define PCI_DEVICE_ID_ETRON_EJ168      0x7023
> > +#define PCI_DEVICE_ID_ETRON_EJ188      0x7052
>
> If you're defining that here, I think it should also be
> removed in
> drivers/usb/host/xhci-pci.c
> by including this file instead?
you are absolutely right - I missed that part
I will change this in v2 - thanks for pointing it out!


Best regards,
Martin
Bjorn Helgaas Nov. 3, 2020, 10:32 p.m. UTC | #3
On Wed, Oct 07, 2020 at 09:45:23PM +0200, Martin Blumenstingl wrote:
> Hi Linus,
> 
> On Wed, Oct 7, 2020 at 11:14 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> >
> > On Sun, Oct 4, 2020 at 8:00 PM Martin Blumenstingl
> > <martin.blumenstingl@googlemail.com> wrote:
> >
> > > Add the vendor ID for Etron Technology, Inc. as well as the device IDs
> > > for the two USB xHCI controllers EJ168 and EJ188.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> >
> > (...)
> >
> > >  #define PCI_VENDOR_ID_REDHAT           0x1b36
> > >
> > > +#define PCI_VENDOR_ID_ETRON            0x1b6f
> > > +#define PCI_DEVICE_ID_ETRON_EJ168      0x7023
> > > +#define PCI_DEVICE_ID_ETRON_EJ188      0x7052
> >
> > If you're defining that here, I think it should also be
> > removed in
> > drivers/usb/host/xhci-pci.c
> > by including this file instead?
> you are absolutely right - I missed that part
> I will change this in v2 - thanks for pointing it out!

And please mention the 2+ places these are used in the commit log (see
the comment at the top of include/linux/pci_ids.h).
diff mbox series

Patch

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1ab1e24bcbce..1c8370aa4b95 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2587,6 +2587,10 @@ 
 
 #define PCI_VENDOR_ID_REDHAT		0x1b36
 
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_ETRON_EJ168	0x7023
+#define PCI_DEVICE_ID_ETRON_EJ188	0x7052
+
 #define PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS	0x1c36
 
 #define PCI_VENDOR_ID_CIRCUITCO		0x1cc8