| Message ID | 8418e2062b82314ceae5da7404fad7b2d3a3fa9a.1602590106.git.mchehab+huawei@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v2,01/24] docs: hwmon: adm1266.rst: fix a broken reference | expand |
On Tue, Oct 13, 2020 at 02:14:44PM +0200, Mauro Carvalho Chehab wrote: > .../Documentation/hwmon/mp2975.rst:25: WARNING: Unexpected indentation. > .../Documentation/hwmon/mp2975.rst:27: WARNING: Block quote ends without a blank line; unexpected unindent. > .../Documentation/hwmon/mp2975.rst:69: WARNING: Unexpected indentation. > .../Documentation/hwmon/mp2975.rst:70: WARNING: Block quote ends without a blank line; unexpected unindent. > .../Documentation/hwmon/mp2975.rst:72: WARNING: Bullet list ends without a blank line; unexpected unindent. > .../Documentation/hwmon/mp2975.rst: WARNING: document isn't included in any toctree > > List blocks should have blank lines before and after them, > in order to be properly parsed. > > Fixes: 4beb7a028e9f ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/mp2975.rst | 14 +++++++++++++- > 2 files changed, 14 insertions(+), 1 deletion(-) > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index e6b91ab12978..b797db738225 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -132,6 +132,7 @@ Hardware Monitoring Kernel Drivers > mcp3021 > menf21bmc > mlxreg-fan > + mp2975 > nct6683 > nct6775 > nct7802 > diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst > index 5b0609c62f48..81d816b71490 100644 > --- a/Documentation/hwmon/mp2975.rst > +++ b/Documentation/hwmon/mp2975.rst > @@ -20,6 +20,7 @@ This driver implements support for Monolithic Power Systems, Inc. (MPS) > vendor dual-loop, digital, multi-phase controller MP2975. > > This device: > + > - Supports up to two power rail. > - Provides 8 pulse-width modulations (PWMs), and can be configured up > to 8-phase operation for rail 1 and up to 4-phase operation for rail > @@ -32,10 +33,12 @@ This device: > 10-mV DAC, IMVP9 mode with 5-mV DAC. > > Device supports: > + > - SVID interface. > - AVSBus interface. > > Device complaint with: > + > - PMBus rev 1.3 interface. > > Device supports direct format for reading output current, output voltage, > @@ -45,11 +48,14 @@ Device supports VID and direct formats for reading output voltage. > The below VID modes are supported: VR12, VR13, IMVP9. > > The driver provides the next attributes for the current: > + > - for current in: input, maximum alarm; > - for current out input, maximum alarm and highest values; > - for phase current: input and label. > -attributes. > + attributes. > + > The driver exports the following attributes via the 'sysfs' files, where > + > - 'n' is number of telemetry pages (from 1 to 2); > - 'k' is number of configured phases (from 1 to 8); > - indexes 1, 1*n for "iin"; > @@ -65,11 +71,14 @@ The driver exports the following attributes via the 'sysfs' files, where > **curr[1-{2n+k}]_label** > > The driver provides the next attributes for the voltage: > + > - for voltage in: input, high critical threshold, high critical alarm, all only > from page 0; > - for voltage out: input, low and high critical thresholds, low and high > critical alarms, from pages 0 and 1; > + > The driver exports the following attributes via the 'sysfs' files, where > + > - 'n' is number of telemetry pages (from 1 to 2); > - indexes 1 for "iin"; > - indexes n+1, n+2 for "vout"; > @@ -87,9 +96,12 @@ The driver exports the following attributes via the 'sysfs' files, where > **in[2-{n+1}1_lcrit_alarm** > > The driver provides the next attributes for the power: > + > - for power in alarm and input. > - for power out: highest and input. > + > The driver exports the following attributes via the 'sysfs' files, where > + > - 'n' is number of telemetry pages (from 1 to 2); > - indexes 1 for "pin"; > - indexes n+1, n+2 for "pout"; > -- > 2.26.2 >
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index e6b91ab12978..b797db738225 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -132,6 +132,7 @@ Hardware Monitoring Kernel Drivers mcp3021 menf21bmc mlxreg-fan + mp2975 nct6683 nct6775 nct7802 diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst index 5b0609c62f48..81d816b71490 100644 --- a/Documentation/hwmon/mp2975.rst +++ b/Documentation/hwmon/mp2975.rst @@ -20,6 +20,7 @@ This driver implements support for Monolithic Power Systems, Inc. (MPS) vendor dual-loop, digital, multi-phase controller MP2975. This device: + - Supports up to two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail @@ -32,10 +33,12 @@ This device: 10-mV DAC, IMVP9 mode with 5-mV DAC. Device supports: + - SVID interface. - AVSBus interface. Device complaint with: + - PMBus rev 1.3 interface. Device supports direct format for reading output current, output voltage, @@ -45,11 +48,14 @@ Device supports VID and direct formats for reading output voltage. The below VID modes are supported: VR12, VR13, IMVP9. The driver provides the next attributes for the current: + - for current in: input, maximum alarm; - for current out input, maximum alarm and highest values; - for phase current: input and label. -attributes. + attributes. + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - 'k' is number of configured phases (from 1 to 8); - indexes 1, 1*n for "iin"; @@ -65,11 +71,14 @@ The driver exports the following attributes via the 'sysfs' files, where **curr[1-{2n+k}]_label** The driver provides the next attributes for the voltage: + - for voltage in: input, high critical threshold, high critical alarm, all only from page 0; - for voltage out: input, low and high critical thresholds, low and high critical alarms, from pages 0 and 1; + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - indexes 1 for "iin"; - indexes n+1, n+2 for "vout"; @@ -87,9 +96,12 @@ The driver exports the following attributes via the 'sysfs' files, where **in[2-{n+1}1_lcrit_alarm** The driver provides the next attributes for the power: + - for power in alarm and input. - for power out: highest and input. + The driver exports the following attributes via the 'sysfs' files, where + - 'n' is number of telemetry pages (from 1 to 2); - indexes 1 for "pin"; - indexes n+1, n+2 for "pout";
.../Documentation/hwmon/mp2975.rst:25: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:27: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:69: WARNING: Unexpected indentation. .../Documentation/hwmon/mp2975.rst:70: WARNING: Block quote ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst:72: WARNING: Bullet list ends without a blank line; unexpected unindent. .../Documentation/hwmon/mp2975.rst: WARNING: document isn't included in any toctree List blocks should have blank lines before and after them, in order to be properly parsed. Fixes: 4beb7a028e9f ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/mp2975.rst | 14 +++++++++++++- 2 files changed, 14 insertions(+), 1 deletion(-)