| Message ID | 20201007034803.7554-1-anant.thazhemadam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4] bluetooth: hci_h5: fix memory leak in h5_close | expand |
Hi, On 10/7/20 5:48 AM, Anant Thazhemadam wrote: > If h5_close is called when !hu->serdev, h5 is directly freed. > However, h5->rx_skb is not freed, which causes a memory leak. > > Freeing h5->rx_skb fixes this memory leak. > > In case hu->serdev exists, h5->rx_skb is then set to NULL, > since we do not want to risk a potential NULL pointer > dereference. > > Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") > Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com > Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com > Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>h5_close v4 > --- > Changes in v4: > * Free h5->rx_skb even when hu->serdev > (Suggested by Hans de Goede <hdegoede@redhat.com>) > * If hu->serdev, then assign h5->rx_skb = NULL > > Changes in v3: > * Free h5->rx_skb when !hu->serdev, and fix the memory leak > * Do not incorrectly and unnecessarily call serdev_device_close() > > Changes in v2: > * Fixed the Fixes tag > > drivers/bluetooth/hci_h5.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > index e41854e0d79a..39f9553caa5c 100644 > --- a/drivers/bluetooth/hci_h5.c > +++ b/drivers/bluetooth/hci_h5.c > @@ -245,11 +245,15 @@ static int h5_close(struct hci_uart *hu) > skb_queue_purge(&h5->rel); > skb_queue_purge(&h5->unrel); > > + kfree_skb(h5->rx_skb); > + > if (h5->vnd && h5->vnd->close) > h5->vnd->close(h5); > > if (!hu->serdev) > kfree(h5); > + else > + h5->rx_skb = NULL; Please just do this unconditionally directly after the kfree_skb() So after this comment has been addressed the end result should look like this: skb_queue_purge(&h5->rel); skb_queue_purge(&h5->unrel); kfree_skb(h5->rx_skb); h5->rx_skb = NULL; if (h5->vnd && h5->vnd->close) h5->vnd->close(h5); if (!hu->serdev) kfree(h5); return 0; Regards, Hans
Hi, On 16/10/20 4:58 pm, Hans de Goede wrote: > Hi, > > On 10/7/20 5:48 AM, Anant Thazhemadam wrote: >> If h5_close is called when !hu->serdev, h5 is directly freed. >> However, h5->rx_skb is not freed, which causes a memory leak. >> >> Freeing h5->rx_skb fixes this memory leak. >> >> In case hu->serdev exists, h5->rx_skb is then set to NULL, >> since we do not want to risk a potential NULL pointer >> dereference. >> >> Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") >> Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com >> Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com >> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>h5_close v4 >> --- >> Changes in v4: >> * Free h5->rx_skb even when hu->serdev >> (Suggested by Hans de Goede <hdegoede@redhat.com>) >> * If hu->serdev, then assign h5->rx_skb = NULL >> >> Changes in v3: >> * Free h5->rx_skb when !hu->serdev, and fix the memory leak >> * Do not incorrectly and unnecessarily call serdev_device_close() >> >> Changes in v2: >> * Fixed the Fixes tag >> >> drivers/bluetooth/hci_h5.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c >> index e41854e0d79a..39f9553caa5c 100644 >> --- a/drivers/bluetooth/hci_h5.c >> +++ b/drivers/bluetooth/hci_h5.c >> @@ -245,11 +245,15 @@ static int h5_close(struct hci_uart *hu) >> skb_queue_purge(&h5->rel); >> skb_queue_purge(&h5->unrel); >> >> + kfree_skb(h5->rx_skb); >> + >> if (h5->vnd && h5->vnd->close) >> h5->vnd->close(h5); >> >> if (!hu->serdev) >> kfree(h5); >> + else >> + h5->rx_skb = NULL; > Please just do this unconditionally directly after > the kfree_skb() Could you also please tell me why this might be necessary? The pointer value stored at h5->rx_skb would be freed anyways when we free h5 (since rx_skb is essentially a member of the structure that h5 points to). Also since we're performing the *if* check, the *else* condition wouldn't exactly be taxing either, right? Is there some performance metric that I'm missing where unconditionally setting it to NULL in this manner would be better? (I couldn't find any resources that had any similar analysis performed :/ ) Or is this in interest of code readability? Also, how about we introduce a h5 = NULL, after freeing h5 when !hu->serdev? Thank you for your time. Thanks, Anant
Hi, On 10/16/20 1:55 PM, Anant Thazhemadam wrote: > > Hi, > > On 16/10/20 4:58 pm, Hans de Goede wrote: >> Hi, >> >> On 10/7/20 5:48 AM, Anant Thazhemadam wrote: >>> If h5_close is called when !hu->serdev, h5 is directly freed. >>> However, h5->rx_skb is not freed, which causes a memory leak. >>> >>> Freeing h5->rx_skb fixes this memory leak. >>> >>> In case hu->serdev exists, h5->rx_skb is then set to NULL, >>> since we do not want to risk a potential NULL pointer >>> dereference. >>> >>> Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") >>> Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com >>> Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com >>> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>h5_close v4 >>> --- >>> Changes in v4: >>> * Free h5->rx_skb even when hu->serdev >>> (Suggested by Hans de Goede <hdegoede@redhat.com>) >>> * If hu->serdev, then assign h5->rx_skb = NULL >>> >>> Changes in v3: >>> * Free h5->rx_skb when !hu->serdev, and fix the memory leak >>> * Do not incorrectly and unnecessarily call serdev_device_close() >>> >>> Changes in v2: >>> * Fixed the Fixes tag >>> >>> drivers/bluetooth/hci_h5.c | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c >>> index e41854e0d79a..39f9553caa5c 100644 >>> --- a/drivers/bluetooth/hci_h5.c >>> +++ b/drivers/bluetooth/hci_h5.c >>> @@ -245,11 +245,15 @@ static int h5_close(struct hci_uart *hu) >>> skb_queue_purge(&h5->rel); >>> skb_queue_purge(&h5->unrel); >>> >>> + kfree_skb(h5->rx_skb); >>> + >>> if (h5->vnd && h5->vnd->close) >>> h5->vnd->close(h5); >>> >>> if (!hu->serdev) >>> kfree(h5); >>> + else >>> + h5->rx_skb = NULL; >> Please just do this unconditionally directly after >> the kfree_skb() > > Could you also please tell me why this might be necessary? > The pointer value stored at h5->rx_skb would be freed anyways when we free h5 (since rx_skb is > essentially a member of the structure that h5 points to). It is necessary in the path where the struct h5 points to is not free-ed and it is cleaner to just always do it then, as you indicate yourself > Also since we're performing the *if* check, the *else* condition wouldn't exactly be taxing either, > right? For the computer it is not taxing, but for a human reading the code and trying to understand the flow it makes things extra complicated unnecessarily. > Is there some performance metric that I'm missing where unconditionally setting it to NULL > in this manner would be better? (I couldn't find any resources that had any similar analysis > performed :/ ) > Or is this in interest of code readability? Yes, it is in interest of code readability? > Also, how about we introduce a h5 = NULL, after freeing h5 when !hu->serdev? That is not necessary, there is no reason to have that in either code path. Regards, Hans
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c index e41854e0d79a..39f9553caa5c 100644 --- a/drivers/bluetooth/hci_h5.c +++ b/drivers/bluetooth/hci_h5.c @@ -245,11 +245,15 @@ static int h5_close(struct hci_uart *hu) skb_queue_purge(&h5->rel); skb_queue_purge(&h5->unrel); + kfree_skb(h5->rx_skb); + if (h5->vnd && h5->vnd->close) h5->vnd->close(h5); if (!hu->serdev) kfree(h5); + else + h5->rx_skb = NULL; return 0; }
If h5_close is called when !hu->serdev, h5 is directly freed. However, h5->rx_skb is not freed, which causes a memory leak. Freeing h5->rx_skb fixes this memory leak. In case hu->serdev exists, h5->rx_skb is then set to NULL, since we do not want to risk a potential NULL pointer dereference. Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>h5_close v4 --- Changes in v4: * Free h5->rx_skb even when hu->serdev (Suggested by Hans de Goede <hdegoede@redhat.com>) * If hu->serdev, then assign h5->rx_skb = NULL Changes in v3: * Free h5->rx_skb when !hu->serdev, and fix the memory leak * Do not incorrectly and unnecessarily call serdev_device_close() Changes in v2: * Fixed the Fixes tag drivers/bluetooth/hci_h5.c | 4 ++++ 1 file changed, 4 insertions(+)