| Message ID | 20201014155719.15120-3-fabrizio.castro.jz@renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add r8a77965 DRIF support | expand |
On Wed, 14 Oct 2020 16:57:16 +0100, Fabrizio Castro wrote: > Convert the Renesas DRIF bindings to DT schema and update > MAINTAINERS accordingly. > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > v3->v4: > * Replace "if" statement with "else" statement for the branch > rejecting pinctrl-0 and pinctrl-names properties, as suggested > by Geert > v2->v3: > * Removed the definition of pinctrl-0 and pinctrl-names, as > suggested by Geert > * Added "power-domains" to the list of required properties, > as suggested by Geert > v1->v2: > * s/controller/Controller/ in the title of renesas,drif.yaml > as suggested by Laurent. > > .../bindings/media/renesas,drif.txt | 177 ----------- > .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 278 insertions(+), 178 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt > create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml > My bot found errors running 'make dt_binding_check' on your patch: ./Documentation/devicetree/bindings/media/renesas,drif.yaml:54:9: [warning] wrong indentation: expected 10 but found 8 (indentation) See https://patchwork.ozlabs.org/patch/1382223 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
On Wed, Oct 14, 2020 at 04:57:16PM +0100, Fabrizio Castro wrote: > Convert the Renesas DRIF bindings to DT schema and update > MAINTAINERS accordingly. > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > v3->v4: > * Replace "if" statement with "else" statement for the branch > rejecting pinctrl-0 and pinctrl-names properties, as suggested > by Geert > v2->v3: > * Removed the definition of pinctrl-0 and pinctrl-names, as > suggested by Geert > * Added "power-domains" to the list of required properties, > as suggested by Geert > v1->v2: > * s/controller/Controller/ in the title of renesas,drif.yaml > as suggested by Laurent. > > .../bindings/media/renesas,drif.txt | 177 ----------- > .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 278 insertions(+), 178 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt > create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml > > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt > deleted file mode 100644 > index 0d8974aa8b38..000000000000 > --- a/Documentation/devicetree/bindings/media/renesas,drif.txt > +++ /dev/null > @@ -1,177 +0,0 @@ > -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) > ------------------------------------------------------------- > - > -R-Car Gen3 DRIF is a SPI like receive only slave device. A general > -representation of DRIF interfacing with a master device is shown below. > - > -+---------------------+ +---------------------+ > -| |-----SCK------->|CLK | > -| Master |-----SS-------->|SYNC DRIFn (slave) | > -| |-----SD0------->|D0 | > -| |-----SD1------->|D1 | > -+---------------------+ +---------------------+ > - > -As per datasheet, each DRIF channel (drifn) is made up of two internal > -channels (drifn0 & drifn1). These two internal channels share the common > -CLK & SYNC. Each internal channel has its own dedicated resources like > -irq, dma channels, address space & clock. This internal split is not > -visible to the external master device. > - > -The device tree model represents each internal channel as a separate node. > -The internal channels sharing the CLK & SYNC are tied together by their > -phandles using a property called "renesas,bonding". For the rest of > -the documentation, unless explicitly stated, the word channel implies an > -internal channel. > - > -When both internal channels are enabled they need to be managed together > -as one (i.e.) they cannot operate alone as independent devices. Out of the > -two, one of them needs to act as a primary device that accepts common > -properties of both the internal channels. This channel is identified by a > -property called "renesas,primary-bond". > - > -To summarize, > - - When both the internal channels that are bonded together are enabled, > - the zeroth channel is selected as primary-bond. This channels accepts > - properties common to all the members of the bond. > - - When only one of the bonded channels need to be enabled, the property > - "renesas,bonding" or "renesas,primary-bond" will have no effect. That > - enabled channel can act alone as any other independent device. > - > -Required properties of an internal channel: > -------------------------------------------- > -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. > - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. > - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. > - > - When compatible with the generic version, nodes must list the > - SoC-specific version corresponding to the platform first > - followed by the generic version. > - > -- reg: offset and length of that channel. > -- interrupts: associated with that channel. > -- clocks: phandle and clock specifier of that channel. > -- clock-names: clock input name string: "fck". > -- dmas: phandles to the DMA channels. > -- dma-names: names of the DMA channel: "rx". > -- renesas,bonding: phandle to the other channel. > - > -Optional properties of an internal channel: > -------------------------------------------- > -- power-domains: phandle to the respective power domain. > - > -Required properties of an internal channel when: > - - It is the only enabled channel of the bond (or) > - - If it acts as primary among enabled bonds > --------------------------------------------------------- > -- pinctrl-0: pin control group to be used for this channel. > -- pinctrl-names: must be "default". > -- renesas,primary-bond: empty property indicating the channel acts as primary > - among the bonded channels. > -- port: child port node corresponding to the data input, in accordance with > - the video interface bindings defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. The port > - node must contain at least one endpoint. > - > -Optional endpoint property: > ---------------------------- > -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. > - This property maps to SYNCAC bit in the hardware manual. The > - default is 1 (active high). > - > -Example: > --------- > - > -(1) Both internal channels enabled: > ------------------------------------ > - > -When interfacing with a third party tuner device with two data pins as shown > -below. > - > -+---------------------+ +---------------------+ > -| |-----SCK------->|CLK | > -| Master |-----SS-------->|SYNC DRIFn (slave) | > -| |-----SD0------->|D0 | > -| |-----SD1------->|D1 | > -+---------------------+ +---------------------+ > - > - drif00: rif@e6f40000 { > - compatible = "renesas,r8a7795-drif", > - "renesas,rcar-gen3-drif"; > - reg = <0 0xe6f40000 0 0x64>; > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cpg CPG_MOD 515>; > - clock-names = "fck"; > - dmas = <&dmac1 0x20>, <&dmac2 0x20>; > - dma-names = "rx", "rx"; > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > - renesas,bonding = <&drif01>; > - renesas,primary-bond; > - pinctrl-0 = <&drif0_pins>; > - pinctrl-names = "default"; > - port { > - drif0_ep: endpoint { > - remote-endpoint = <&tuner_ep>; > - }; > - }; > - }; > - > - drif01: rif@e6f50000 { > - compatible = "renesas,r8a7795-drif", > - "renesas,rcar-gen3-drif"; > - reg = <0 0xe6f50000 0 0x64>; > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cpg CPG_MOD 514>; > - clock-names = "fck"; > - dmas = <&dmac1 0x22>, <&dmac2 0x22>; > - dma-names = "rx", "rx"; > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > - renesas,bonding = <&drif00>; > - }; > - > - > -(2) Internal channel 1 alone is enabled: > ----------------------------------------- > - > -When interfacing with a third party tuner device with one data pin as shown > -below. > - > -+---------------------+ +---------------------+ > -| |-----SCK------->|CLK | > -| Master |-----SS-------->|SYNC DRIFn (slave) | > -| | |D0 (unused) | > -| |-----SD-------->|D1 | > -+---------------------+ +---------------------+ > - > - drif00: rif@e6f40000 { > - compatible = "renesas,r8a7795-drif", > - "renesas,rcar-gen3-drif"; > - reg = <0 0xe6f40000 0 0x64>; > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cpg CPG_MOD 515>; > - clock-names = "fck"; > - dmas = <&dmac1 0x20>, <&dmac2 0x20>; > - dma-names = "rx", "rx"; > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > - renesas,bonding = <&drif01>; > - }; > - > - drif01: rif@e6f50000 { > - compatible = "renesas,r8a7795-drif", > - "renesas,rcar-gen3-drif"; > - reg = <0 0xe6f50000 0 0x64>; > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cpg CPG_MOD 514>; > - clock-names = "fck"; > - dmas = <&dmac1 0x22>, <&dmac2 0x22>; > - dma-names = "rx", "rx"; > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > - renesas,bonding = <&drif00>; > - pinctrl-0 = <&drif0_pins>; > - pinctrl-names = "default"; > - port { > - drif0_ep: endpoint { > - remote-endpoint = <&tuner_ep>; > - sync-active = <0>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml > new file mode 100644 > index 000000000000..3832ce837553 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml > @@ -0,0 +1,277 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) > + > +maintainers: > + - Ramesh Shanmugasundaram <rashanmu@gmail.com> > + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> > + > +description: | > + R-Car Gen3 DRIF is a SPI like receive only slave device. A general > + representation of DRIF interfacing with a master device is shown below. > + > + +---------------------+ +---------------------+ > + | |-----SCK------->|CLK | > + | Master |-----SS-------->|SYNC DRIFn (slave) | > + | |-----SD0------->|D0 | > + | |-----SD1------->|D1 | > + +---------------------+ +---------------------+ > + > + As per datasheet, each DRIF channel (drifn) is made up of two internal > + channels (drifn0 & drifn1). These two internal channels share the common > + CLK & SYNC. Each internal channel has its own dedicated resources like > + irq, dma channels, address space & clock. This internal split is not > + visible to the external master device. > + > + The device tree model represents each internal channel as a separate node. > + The internal channels sharing the CLK & SYNC are tied together by their > + phandles using a property called "renesas,bonding". For the rest of > + the documentation, unless explicitly stated, the word channel implies an > + internal channel. > + > + When both internal channels are enabled they need to be managed together > + as one (i.e.) they cannot operate alone as independent devices. Out of the > + two, one of them needs to act as a primary device that accepts common > + properties of both the internal channels. This channel is identified by a > + property called "renesas,primary-bond". > + > + To summarize, > + * When both the internal channels that are bonded together are enabled, > + the zeroth channel is selected as primary-bond. This channels accepts > + properties common to all the members of the bond. > + * When only one of the bonded channels need to be enabled, the property > + "renesas,bonding" or "renesas,primary-bond" will have no effect. That > + enabled channel can act alone as any other independent device. > + > +properties: > + compatible: > + items: > + - enum: > + - renesas,r8a7795-drif # R-Car H3 > + - renesas,r8a7796-drif # R-Car M3-W Note the bot error is from yamllint which just got added to the checks. Need 2 more spaces indent here. With that, Reviewed-by: Rob Herring <robh@kernel.org>
Hi Rob, Thank you for your feedback. > From: Rob Herring <robh@kernel.org> > Sent: 16 October 2020 16:56 > Subject: Re: [PATCH v4 2/5] media: dt-bindings: media: renesas,drif: Convert to > json-schema > > On Wed, Oct 14, 2020 at 04:57:16PM +0100, Fabrizio Castro wrote: > > Convert the Renesas DRIF bindings to DT schema and update > > MAINTAINERS accordingly. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> > > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > v3->v4: > > * Replace "if" statement with "else" statement for the branch > > rejecting pinctrl-0 and pinctrl-names properties, as suggested > > by Geert > > v2->v3: > > * Removed the definition of pinctrl-0 and pinctrl-names, as > > suggested by Geert > > * Added "power-domains" to the list of required properties, > > as suggested by Geert > > v1->v2: > > * s/controller/Controller/ in the title of renesas,drif.yaml > > as suggested by Laurent. > > > > .../bindings/media/renesas,drif.txt | 177 ----------- > > .../bindings/media/renesas,drif.yaml | 277 ++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 278 insertions(+), 178 deletions(-) > > delete mode 100644 > Documentation/devicetree/bindings/media/renesas,drif.txt > > create mode 100644 > Documentation/devicetree/bindings/media/renesas,drif.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt > b/Documentation/devicetree/bindings/media/renesas,drif.txt > > deleted file mode 100644 > > index 0d8974aa8b38..000000000000 > > --- a/Documentation/devicetree/bindings/media/renesas,drif.txt > > +++ /dev/null > > @@ -1,177 +0,0 @@ > > -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) > > ------------------------------------------------------------- > > - > > -R-Car Gen3 DRIF is a SPI like receive only slave device. A general > > -representation of DRIF interfacing with a master device is shown below. > > - > > -+---------------------+ +---------------------+ > > -| |-----SCK------->|CLK | > > -| Master |-----SS-------->|SYNC DRIFn (slave) | > > -| |-----SD0------->|D0 | > > -| |-----SD1------->|D1 | > > -+---------------------+ +---------------------+ > > - > > -As per datasheet, each DRIF channel (drifn) is made up of two internal > > -channels (drifn0 & drifn1). These two internal channels share the common > > -CLK & SYNC. Each internal channel has its own dedicated resources like > > -irq, dma channels, address space & clock. This internal split is not > > -visible to the external master device. > > - > > -The device tree model represents each internal channel as a separate node. > > -The internal channels sharing the CLK & SYNC are tied together by their > > -phandles using a property called "renesas,bonding". For the rest of > > -the documentation, unless explicitly stated, the word channel implies an > > -internal channel. > > - > > -When both internal channels are enabled they need to be managed together > > -as one (i.e.) they cannot operate alone as independent devices. Out of the > > -two, one of them needs to act as a primary device that accepts common > > -properties of both the internal channels. This channel is identified by a > > -property called "renesas,primary-bond". > > - > > -To summarize, > > - - When both the internal channels that are bonded together are enabled, > > - the zeroth channel is selected as primary-bond. This channels accepts > > - properties common to all the members of the bond. > > - - When only one of the bonded channels need to be enabled, the property > > - "renesas,bonding" or "renesas,primary-bond" will have no effect. That > > - enabled channel can act alone as any other independent device. > > - > > -Required properties of an internal channel: > > -------------------------------------------- > > -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 > SoC. > > - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 > SoC. > > - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible > device. > > - > > - When compatible with the generic version, nodes must list the > > - SoC-specific version corresponding to the platform first > > - followed by the generic version. > > - > > -- reg: offset and length of that channel. > > -- interrupts: associated with that channel. > > -- clocks: phandle and clock specifier of that channel. > > -- clock-names: clock input name string: "fck". > > -- dmas: phandles to the DMA channels. > > -- dma-names: names of the DMA channel: "rx". > > -- renesas,bonding: phandle to the other channel. > > - > > -Optional properties of an internal channel: > > -------------------------------------------- > > -- power-domains: phandle to the respective power domain. > > - > > -Required properties of an internal channel when: > > - - It is the only enabled channel of the bond (or) > > - - If it acts as primary among enabled bonds > > --------------------------------------------------------- > > -- pinctrl-0: pin control group to be used for this channel. > > -- pinctrl-names: must be "default". > > -- renesas,primary-bond: empty property indicating the channel acts as > primary > > - among the bonded channels. > > -- port: child port node corresponding to the data input, in accordance with > > - the video interface bindings defined in > > - Documentation/devicetree/bindings/media/video-interfaces.txt. The > port > > - node must contain at least one endpoint. > > - > > -Optional endpoint property: > > ---------------------------- > > -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. > > - This property maps to SYNCAC bit in the hardware manual. The > > - default is 1 (active high). > > - > > -Example: > > --------- > > - > > -(1) Both internal channels enabled: > > ------------------------------------ > > - > > -When interfacing with a third party tuner device with two data pins as shown > > -below. > > - > > -+---------------------+ +---------------------+ > > -| |-----SCK------->|CLK | > > -| Master |-----SS-------->|SYNC DRIFn (slave) | > > -| |-----SD0------->|D0 | > > -| |-----SD1------->|D1 | > > -+---------------------+ +---------------------+ > > - > > - drif00: rif@e6f40000 { > > - compatible = "renesas,r8a7795-drif", > > - "renesas,rcar-gen3-drif"; > > - reg = <0 0xe6f40000 0 0x64>; > > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&cpg CPG_MOD 515>; > > - clock-names = "fck"; > > - dmas = <&dmac1 0x20>, <&dmac2 0x20>; > > - dma-names = "rx", "rx"; > > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > > - renesas,bonding = <&drif01>; > > - renesas,primary-bond; > > - pinctrl-0 = <&drif0_pins>; > > - pinctrl-names = "default"; > > - port { > > - drif0_ep: endpoint { > > - remote-endpoint = <&tuner_ep>; > > - }; > > - }; > > - }; > > - > > - drif01: rif@e6f50000 { > > - compatible = "renesas,r8a7795-drif", > > - "renesas,rcar-gen3-drif"; > > - reg = <0 0xe6f50000 0 0x64>; > > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&cpg CPG_MOD 514>; > > - clock-names = "fck"; > > - dmas = <&dmac1 0x22>, <&dmac2 0x22>; > > - dma-names = "rx", "rx"; > > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > > - renesas,bonding = <&drif00>; > > - }; > > - > > - > > -(2) Internal channel 1 alone is enabled: > > ----------------------------------------- > > - > > -When interfacing with a third party tuner device with one data pin as shown > > -below. > > - > > -+---------------------+ +---------------------+ > > -| |-----SCK------->|CLK | > > -| Master |-----SS-------->|SYNC DRIFn (slave) | > > -| | |D0 (unused) | > > -| |-----SD-------->|D1 | > > -+---------------------+ +---------------------+ > > - > > - drif00: rif@e6f40000 { > > - compatible = "renesas,r8a7795-drif", > > - "renesas,rcar-gen3-drif"; > > - reg = <0 0xe6f40000 0 0x64>; > > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&cpg CPG_MOD 515>; > > - clock-names = "fck"; > > - dmas = <&dmac1 0x20>, <&dmac2 0x20>; > > - dma-names = "rx", "rx"; > > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > > - renesas,bonding = <&drif01>; > > - }; > > - > > - drif01: rif@e6f50000 { > > - compatible = "renesas,r8a7795-drif", > > - "renesas,rcar-gen3-drif"; > > - reg = <0 0xe6f50000 0 0x64>; > > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&cpg CPG_MOD 514>; > > - clock-names = "fck"; > > - dmas = <&dmac1 0x22>, <&dmac2 0x22>; > > - dma-names = "rx", "rx"; > > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > > - renesas,bonding = <&drif00>; > > - pinctrl-0 = <&drif0_pins>; > > - pinctrl-names = "default"; > > - port { > > - drif0_ep: endpoint { > > - remote-endpoint = <&tuner_ep>; > > - sync-active = <0>; > > - }; > > - }; > > - }; > > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml > b/Documentation/devicetree/bindings/media/renesas,drif.yaml > > new file mode 100644 > > index 000000000000..3832ce837553 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml > > @@ -0,0 +1,277 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) > > + > > +maintainers: > > + - Ramesh Shanmugasundaram <rashanmu@gmail.com> > > + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> > > + > > +description: | > > + R-Car Gen3 DRIF is a SPI like receive only slave device. A general > > + representation of DRIF interfacing with a master device is shown below. > > + > > + +---------------------+ +---------------------+ > > + | |-----SCK------->|CLK | > > + | Master |-----SS-------->|SYNC DRIFn (slave) | > > + | |-----SD0------->|D0 | > > + | |-----SD1------->|D1 | > > + +---------------------+ +---------------------+ > > + > > + As per datasheet, each DRIF channel (drifn) is made up of two internal > > + channels (drifn0 & drifn1). These two internal channels share the common > > + CLK & SYNC. Each internal channel has its own dedicated resources like > > + irq, dma channels, address space & clock. This internal split is not > > + visible to the external master device. > > + > > + The device tree model represents each internal channel as a separate node. > > + The internal channels sharing the CLK & SYNC are tied together by their > > + phandles using a property called "renesas,bonding". For the rest of > > + the documentation, unless explicitly stated, the word channel implies an > > + internal channel. > > + > > + When both internal channels are enabled they need to be managed together > > + as one (i.e.) they cannot operate alone as independent devices. Out of the > > + two, one of them needs to act as a primary device that accepts common > > + properties of both the internal channels. This channel is identified by a > > + property called "renesas,primary-bond". > > + > > + To summarize, > > + * When both the internal channels that are bonded together are enabled, > > + the zeroth channel is selected as primary-bond. This channels accepts > > + properties common to all the members of the bond. > > + * When only one of the bonded channels need to be enabled, the property > > + "renesas,bonding" or "renesas,primary-bond" will have no effect. That > > + enabled channel can act alone as any other independent device. > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - renesas,r8a7795-drif # R-Car H3 > > + - renesas,r8a7796-drif # R-Car M3-W > > Note the bot error is from yamllint which just got added to the checks. > Need 2 more spaces indent here. Thank you for reporting this. Unfortunately I wasn't personally able to reproduce this, but thankfully a colleague of mine (Prabhakar) was able to reproduce the warning on his setup. I'll send a v5 to fix this. Thanks, Fab > > With that, > > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt deleted file mode 100644 index 0d8974aa8b38..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,drif.txt +++ /dev/null @@ -1,177 +0,0 @@ -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) ------------------------------------------------------------- - -R-Car Gen3 DRIF is a SPI like receive only slave device. A general -representation of DRIF interfacing with a master device is shown below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - -As per datasheet, each DRIF channel (drifn) is made up of two internal -channels (drifn0 & drifn1). These two internal channels share the common -CLK & SYNC. Each internal channel has its own dedicated resources like -irq, dma channels, address space & clock. This internal split is not -visible to the external master device. - -The device tree model represents each internal channel as a separate node. -The internal channels sharing the CLK & SYNC are tied together by their -phandles using a property called "renesas,bonding". For the rest of -the documentation, unless explicitly stated, the word channel implies an -internal channel. - -When both internal channels are enabled they need to be managed together -as one (i.e.) they cannot operate alone as independent devices. Out of the -two, one of them needs to act as a primary device that accepts common -properties of both the internal channels. This channel is identified by a -property called "renesas,primary-bond". - -To summarize, - - When both the internal channels that are bonded together are enabled, - the zeroth channel is selected as primary-bond. This channels accepts - properties common to all the members of the bond. - - When only one of the bonded channels need to be enabled, the property - "renesas,bonding" or "renesas,primary-bond" will have no effect. That - enabled channel can act alone as any other independent device. - -Required properties of an internal channel: -------------------------------------------- -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of that channel. -- interrupts: associated with that channel. -- clocks: phandle and clock specifier of that channel. -- clock-names: clock input name string: "fck". -- dmas: phandles to the DMA channels. -- dma-names: names of the DMA channel: "rx". -- renesas,bonding: phandle to the other channel. - -Optional properties of an internal channel: -------------------------------------------- -- power-domains: phandle to the respective power domain. - -Required properties of an internal channel when: - - It is the only enabled channel of the bond (or) - - If it acts as primary among enabled bonds --------------------------------------------------------- -- pinctrl-0: pin control group to be used for this channel. -- pinctrl-names: must be "default". -- renesas,primary-bond: empty property indicating the channel acts as primary - among the bonded channels. -- port: child port node corresponding to the data input, in accordance with - the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The port - node must contain at least one endpoint. - -Optional endpoint property: ---------------------------- -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. - This property maps to SYNCAC bit in the hardware manual. The - default is 1 (active high). - -Example: --------- - -(1) Both internal channels enabled: ------------------------------------ - -When interfacing with a third party tuner device with two data pins as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - renesas,primary-bond; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - }; - }; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - }; - - -(2) Internal channel 1 alone is enabled: ----------------------------------------- - -When interfacing with a third party tuner device with one data pin as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| | |D0 (unused) | -| |-----SD-------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - sync-active = <0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml new file mode 100644 index 000000000000..3832ce837553 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) + +maintainers: + - Ramesh Shanmugasundaram <rashanmu@gmail.com> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +description: | + R-Car Gen3 DRIF is a SPI like receive only slave device. A general + representation of DRIF interfacing with a master device is shown below. + + +---------------------+ +---------------------+ + | |-----SCK------->|CLK | + | Master |-----SS-------->|SYNC DRIFn (slave) | + | |-----SD0------->|D0 | + | |-----SD1------->|D1 | + +---------------------+ +---------------------+ + + As per datasheet, each DRIF channel (drifn) is made up of two internal + channels (drifn0 & drifn1). These two internal channels share the common + CLK & SYNC. Each internal channel has its own dedicated resources like + irq, dma channels, address space & clock. This internal split is not + visible to the external master device. + + The device tree model represents each internal channel as a separate node. + The internal channels sharing the CLK & SYNC are tied together by their + phandles using a property called "renesas,bonding". For the rest of + the documentation, unless explicitly stated, the word channel implies an + internal channel. + + When both internal channels are enabled they need to be managed together + as one (i.e.) they cannot operate alone as independent devices. Out of the + two, one of them needs to act as a primary device that accepts common + properties of both the internal channels. This channel is identified by a + property called "renesas,primary-bond". + + To summarize, + * When both the internal channels that are bonded together are enabled, + the zeroth channel is selected as primary-bond. This channels accepts + properties common to all the members of the bond. + * When only one of the bonded channels need to be enabled, the property + "renesas,bonding" or "renesas,primary-bond" will have no effect. That + enabled channel can act alone as any other independent device. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-drif # R-Car H3 + - renesas,r8a7796-drif # R-Car M3-W + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + items: + - const: fck + + resets: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + maxItems: 2 + items: + - const: rx + - const: rx + + renesas,bonding: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the other internal channel of DRIF + + power-domains: + maxItems: 1 + + renesas,primary-bond: + type: boolean + description: + Indicates that the channel acts as primary among the bonded channels. + + port: + type: object + description: + Child port node corresponding to the data input, in accordance with the + video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + The port node must contain at least one endpoint. + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: + A phandle to the remote tuner endpoint subnode in remote node + port. + + sync-active: + enum: [0, 1] + description: + Indicates sync signal polarity, 0/1 for low/high respectively. + This property maps to SYNCAC bit in the hardware manual. The + default is 1 (active high). + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - dmas + - dma-names + - renesas,bonding + - power-domains + +allOf: + - if: + required: + - renesas,primary-bond + then: + required: + - pinctrl-0 + - pinctrl-names + - port + + - if: + required: + - port + then: + required: + - pinctrl-0 + - pinctrl-names + else: + properties: + pinctrl-0: false + pinctrl-names: false + +additionalProperties: false + +examples: + # Example with both internal channels enabled. + # + # When interfacing with a third party tuner device with two data pins as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | |-----SD0------->|D0 | + # | |-----SD1------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif00: rif@e6f40000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif01>; + resets = <&cpg 515>; + renesas,primary-bond; + pinctrl-0 = <&drif0_pins>; + pinctrl-names = "default"; + port { + drif0_ep: endpoint { + remote-endpoint = <&tuner_ep>; + }; + }; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif00>; + resets = <&cpg 514>; + }; + }; + + # Example with internal channel 1 alone enabled. + # + # When interfacing with a third party tuner device with one data pin as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | | |D0 (unused) | + # | |-----SD-------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + pinctrl-0 = <&drif1_pins>; + pinctrl-names = "default"; + port { + drif1_ep: endpoint { + remote-endpoint = <&tuner_ep1>; + sync-active = <0>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 4ff8e65df4e7..797718391b38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10840,7 +10840,7 @@ L: linux-media@vger.kernel.org L: linux-renesas-soc@vger.kernel.org S: Supported T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/renesas,drif.txt +F: Documentation/devicetree/bindings/media/renesas,drif.yaml F: drivers/media/platform/rcar_drif.c MEDIA DRIVERS FOR RENESAS - FCP