| Message ID | 20200922105526.5252-1-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 946a61ab2d758cc645f6e63f1a5e2731690c3943 |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | [v3] drm/bridge: lvds-codec: Add support for regulator | expand |
Hi Laurent, Thanks for the patch. > Subject: [PATCH v3] drm/bridge: lvds-codec: Add support for regulator > > From: Biju Das <biju.das.jz@bp.renesas.com> > > Add the support for enabling optional regulator that may be used as VCC > source. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > [Replaced 'error' variable with 'ret'] > [Renamed regulator from 'vcc' to 'power'] > Signed-off-by: Laurent Pinchart > <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Cheers, Biju > --- > Changes since v2: > > - Use the correct regulator name > --- > drivers/gpu/drm/bridge/lvds-codec.c | 29 > +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c > b/drivers/gpu/drm/bridge/lvds-codec.c > index f19d9f7a5db2..f52ccffc1bd1 100644 > --- a/drivers/gpu/drm/bridge/lvds-codec.c > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > @@ -10,13 +10,16 @@ > #include <linux/of_device.h> > #include <linux/of_graph.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > > #include <drm/drm_bridge.h> > #include <drm/drm_panel.h> > > struct lvds_codec { > +struct device *dev; > struct drm_bridge bridge; > struct drm_bridge *panel_bridge; > +struct regulator *vcc; > struct gpio_desc *powerdown_gpio; > u32 connector_type; > }; > @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge > *bridge, static void lvds_codec_enable(struct drm_bridge *bridge) { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > +int ret; > + > +ret = regulator_enable(lvds_codec->vcc); > +if (ret) { > +dev_err(lvds_codec->dev, > +"Failed to enable regulator \"vcc\": %d\n", ret); > +return; > +} > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 0); @@ -46,9 +57,15 @@ static void lvds_codec_enable(struct drm_bridge > *bridge) static void lvds_codec_disable(struct drm_bridge *bridge) { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > +int ret; > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 1); > + > +ret = regulator_disable(lvds_codec->vcc); > +if (ret) > +dev_err(lvds_codec->dev, > +"Failed to disable regulator \"vcc\": %d\n", ret); > } > > static const struct drm_bridge_funcs funcs = { @@ -63,12 +80,24 @@ static > int lvds_codec_probe(struct platform_device *pdev) > struct device_node *panel_node; > struct drm_panel *panel; > struct lvds_codec *lvds_codec; > +int ret; > > lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > if (!lvds_codec) > return -ENOMEM; > > +lvds_codec->dev = &pdev->dev; > lvds_codec->connector_type = > (uintptr_t)of_device_get_match_data(dev); > + > +lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power"); > +if (IS_ERR(lvds_codec->vcc)) { > +ret = PTR_ERR(lvds_codec->vcc); > +if (ret != -EPROBE_DEFER) > +dev_err(lvds_codec->dev, > +"Unable to get \"vcc\" supply: %d\n", ret); > +return ret; > +} > + > lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, > "powerdown", > > GPIOD_OUT_HIGH); > if (IS_ERR(lvds_codec->powerdown_gpio)) > -- > Regards, > > Laurent Pinchart Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
Hi Biju, Laurent On Tue, Sep 22, 2020 at 01:55:26PM +0300, Laurent Pinchart wrote: > From: Biju Das <biju.das.jz@bp.renesas.com> > > Add the support for enabling optional regulator that may be used as VCC > source. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > [Replaced 'error' variable with 'ret'] > [Renamed regulator from 'vcc' to 'power'] > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Applied to drm-misc-next. Biju, could you make a follow-up patch that introduces dev_err_probe() where appropriate? I did not fix up the code but this was a good candidate. Sam > --- > Changes since v2: > > - Use the correct regulator name > --- > drivers/gpu/drm/bridge/lvds-codec.c | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > index f19d9f7a5db2..f52ccffc1bd1 100644 > --- a/drivers/gpu/drm/bridge/lvds-codec.c > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > @@ -10,13 +10,16 @@ > #include <linux/of_device.h> > #include <linux/of_graph.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > > #include <drm/drm_bridge.h> > #include <drm/drm_panel.h> > > struct lvds_codec { > + struct device *dev; > struct drm_bridge bridge; > struct drm_bridge *panel_bridge; > + struct regulator *vcc; > struct gpio_desc *powerdown_gpio; > u32 connector_type; > }; > @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge *bridge, > static void lvds_codec_enable(struct drm_bridge *bridge) > { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > + int ret; > + > + ret = regulator_enable(lvds_codec->vcc); > + if (ret) { > + dev_err(lvds_codec->dev, > + "Failed to enable regulator \"vcc\": %d\n", ret); > + return; > + } > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > @@ -46,9 +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge) > static void lvds_codec_disable(struct drm_bridge *bridge) > { > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > + int ret; > > if (lvds_codec->powerdown_gpio) > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > + > + ret = regulator_disable(lvds_codec->vcc); > + if (ret) > + dev_err(lvds_codec->dev, > + "Failed to disable regulator \"vcc\": %d\n", ret); > } > > static const struct drm_bridge_funcs funcs = { > @@ -63,12 +80,24 @@ static int lvds_codec_probe(struct platform_device *pdev) > struct device_node *panel_node; > struct drm_panel *panel; > struct lvds_codec *lvds_codec; > + int ret; > > lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > if (!lvds_codec) > return -ENOMEM; > > + lvds_codec->dev = &pdev->dev; > lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev); > + > + lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power"); > + if (IS_ERR(lvds_codec->vcc)) { > + ret = PTR_ERR(lvds_codec->vcc); > + if (ret != -EPROBE_DEFER) > + dev_err(lvds_codec->dev, > + "Unable to get \"vcc\" supply: %d\n", ret); > + return ret; > + } > + > lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > GPIOD_OUT_HIGH); > if (IS_ERR(lvds_codec->powerdown_gpio)) > -- > Regards, > > Laurent Pinchart > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam, > Subject: Re: [PATCH v3] drm/bridge: lvds-codec: Add support for regulator > > Hi Biju, Laurent > > On Tue, Sep 22, 2020 at 01:55:26PM +0300, Laurent Pinchart wrote: > > From: Biju Das <biju.das.jz@bp.renesas.com> > > > > Add the support for enabling optional regulator that may be used as > > VCC source. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > [Replaced 'error' variable with 'ret'] [Renamed regulator from 'vcc' > > to 'power'] > > Signed-off-by: Laurent Pinchart > > <laurent.pinchart+renesas@ideasonboard.com> > > Applied to drm-misc-next. > Biju, could you make a follow-up patch that introduces dev_err_probe() > where appropriate? I did not fix up the code but this was a good candidate. Ok, sure will do. Thanks, Biju > > Sam > > > --- > > Changes since v2: > > > > - Use the correct regulator name > > --- > > drivers/gpu/drm/bridge/lvds-codec.c | 29 > > +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c > > b/drivers/gpu/drm/bridge/lvds-codec.c > > index f19d9f7a5db2..f52ccffc1bd1 100644 > > --- a/drivers/gpu/drm/bridge/lvds-codec.c > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > @@ -10,13 +10,16 @@ > > #include <linux/of_device.h> > > #include <linux/of_graph.h> > > #include <linux/platform_device.h> > > +#include <linux/regulator/consumer.h> > > > > #include <drm/drm_bridge.h> > > #include <drm/drm_panel.h> > > > > struct lvds_codec { > > + struct device *dev; > > struct drm_bridge bridge; > > struct drm_bridge *panel_bridge; > > + struct regulator *vcc; > > struct gpio_desc *powerdown_gpio; > > u32 connector_type; > > }; > > @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge > > *bridge, static void lvds_codec_enable(struct drm_bridge *bridge) { > > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > > + int ret; > > + > > + ret = regulator_enable(lvds_codec->vcc); > > + if (ret) { > > + dev_err(lvds_codec->dev, > > + "Failed to enable regulator \"vcc\": %d\n", ret); > > + return; > > + } > > > > if (lvds_codec->powerdown_gpio) > > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 0); @@ -46,9 > > +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge) > > static void lvds_codec_disable(struct drm_bridge *bridge) { > > struct lvds_codec *lvds_codec = to_lvds_codec(bridge); > > + int ret; > > > > if (lvds_codec->powerdown_gpio) > > gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, > 1); > > + > > + ret = regulator_disable(lvds_codec->vcc); > > + if (ret) > > + dev_err(lvds_codec->dev, > > + "Failed to disable regulator \"vcc\": %d\n", ret); > > } > > > > static const struct drm_bridge_funcs funcs = { @@ -63,12 +80,24 @@ > > static int lvds_codec_probe(struct platform_device *pdev) > > struct device_node *panel_node; > > struct drm_panel *panel; > > struct lvds_codec *lvds_codec; > > + int ret; > > > > lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > if (!lvds_codec) > > return -ENOMEM; > > > > + lvds_codec->dev = &pdev->dev; > > lvds_codec->connector_type = > > (uintptr_t)of_device_get_match_data(dev); > > + > > + lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power"); > > + if (IS_ERR(lvds_codec->vcc)) { > > + ret = PTR_ERR(lvds_codec->vcc); > > + if (ret != -EPROBE_DEFER) > > + dev_err(lvds_codec->dev, > > + "Unable to get \"vcc\" supply: %d\n", ret); > > + return ret; > > + } > > + > > lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, > "powerdown", > > > GPIOD_OUT_HIGH); > > if (IS_ERR(lvds_codec->powerdown_gpio)) > > -- > > Regards, > > > > Laurent Pinchart > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c index f19d9f7a5db2..f52ccffc1bd1 100644 --- a/drivers/gpu/drm/bridge/lvds-codec.c +++ b/drivers/gpu/drm/bridge/lvds-codec.c @@ -10,13 +10,16 @@ #include <linux/of_device.h> #include <linux/of_graph.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <drm/drm_bridge.h> #include <drm/drm_panel.h> struct lvds_codec { + struct device *dev; struct drm_bridge bridge; struct drm_bridge *panel_bridge; + struct regulator *vcc; struct gpio_desc *powerdown_gpio; u32 connector_type; }; @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge *bridge, static void lvds_codec_enable(struct drm_bridge *bridge) { struct lvds_codec *lvds_codec = to_lvds_codec(bridge); + int ret; + + ret = regulator_enable(lvds_codec->vcc); + if (ret) { + dev_err(lvds_codec->dev, + "Failed to enable regulator \"vcc\": %d\n", ret); + return; + } if (lvds_codec->powerdown_gpio) gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); @@ -46,9 +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge) static void lvds_codec_disable(struct drm_bridge *bridge) { struct lvds_codec *lvds_codec = to_lvds_codec(bridge); + int ret; if (lvds_codec->powerdown_gpio) gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); + + ret = regulator_disable(lvds_codec->vcc); + if (ret) + dev_err(lvds_codec->dev, + "Failed to disable regulator \"vcc\": %d\n", ret); } static const struct drm_bridge_funcs funcs = { @@ -63,12 +80,24 @@ static int lvds_codec_probe(struct platform_device *pdev) struct device_node *panel_node; struct drm_panel *panel; struct lvds_codec *lvds_codec; + int ret; lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); if (!lvds_codec) return -ENOMEM; + lvds_codec->dev = &pdev->dev; lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev); + + lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power"); + if (IS_ERR(lvds_codec->vcc)) { + ret = PTR_ERR(lvds_codec->vcc); + if (ret != -EPROBE_DEFER) + dev_err(lvds_codec->dev, + "Unable to get \"vcc\" supply: %d\n", ret); + return ret; + } + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH); if (IS_ERR(lvds_codec->powerdown_gpio))