| Message ID | 20201020115959.2658-27-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand |
On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote: > In accordance with the DWC USB3 bindings the corresponding node > name is suppose to comply with the Generic USB HCD DT schema, which > requires the USB nodes to have the name acceptable by the regexp: > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > named. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Thanks for the changes to DTSes. I'll take Exynos bits after the mege window. Best regards, Krzysztof
On Tue, Oct 20, 2020 at 02:43:28PM +0200, Krzysztof Kozlowski wrote: > On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote: > > In accordance with the DWC USB3 bindings the corresponding node > > name is suppose to comply with the Generic USB HCD DT schema, which > > requires the USB nodes to have the name acceptable by the regexp: > > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > > named. > > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > > --- > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- > > arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- > > 2 files changed, 3 insertions(+), 3 deletions(-) > > Thanks for the changes to DTSes. I'll take Exynos bits after the mege > window. Ok. Thanks. -Sergey > > Best regards, > Krzysztof >
On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote: > In accordance with the DWC USB3 bindings the corresponding node > name is suppose to comply with the Generic USB HCD DT schema, which > requires the USB nodes to have the name acceptable by the regexp: > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > named. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- > 2 files changed, 3 insertions(+), 3 deletions(-) Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 74ac4ac75865..3320e596cb3f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1651,7 +1651,7 @@ usbdrd30: usbdrd { ranges; status = "disabled"; - usbdrd_dwc3: dwc3@15400000 { + usbdrd_dwc3: usb@15400000 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBDRD30>, <&cmu_fsys CLK_ACLK_USBDRD30>, @@ -1704,7 +1704,7 @@ usbhost30: usbhost { ranges; status = "disabled"; - usbhost_dwc3: dwc3@15a00000 { + usbhost_dwc3: usb@15a00000 { compatible = "snps,dwc3"; clocks = <&cmu_fsys CLK_SCLK_USBHOST30>, <&cmu_fsys CLK_ACLK_USBHOST30>, diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index b9ed6a33e290..48cd3a04fd07 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -654,7 +654,7 @@ usbdrd3 { #size-cells = <1>; ranges; - dwc3@15400000 { + usb@15400000 { compatible = "snps,dwc3"; reg = <0x15400000 0x10000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)