| Message ID | 20201020115959.2658-28-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand |
On Tue, Oct 20, 2020 at 02:59:57PM +0300, Serge Semin wrote: > In accordance with the DWC USB3 bindings the corresponding node > name is suppose to comply with the Generic USB HCD DT schema, which > requires the USB nodes to have the name acceptable by the regexp: > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > named. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++-- > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++--- > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++-- > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++-- > 4 files changed, 9 insertions(+), 9 deletions(-) > Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
On Tue, Oct 20, 2020 at 02:59:57PM +0300, Serge Semin wrote: > In accordance with the DWC USB3 bindings the corresponding node > name is suppose to comply with the Generic USB HCD DT schema, which > requires the USB nodes to have the name acceptable by the regexp: > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > named. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index ff19ec415b60..06dac6be67e9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -453,7 +453,7 @@ edma0: edma@2c00000 { <&clockgen 4 3>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -474,7 +474,7 @@ sata: sata@3200000 { status = "disabled"; }; - usb1: usb2@8600000 { + usb1: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; interrupts = <0 139 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 5c2e370f6316..1f45fa32e57b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -750,7 +750,7 @@ edma0: edma@2c00000 { <&clockgen 4 0>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -761,7 +761,7 @@ usb0: usb3@2f00000 { status = "disabled"; }; - usb1: usb3@3000000 { + usb1: usb@3000000 { compatible = "snps,dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <0 61 0x4>; @@ -772,7 +772,7 @@ usb1: usb3@3000000 { status = "disabled"; }; - usb2: usb3@3100000 { + usb2: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 63 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 169f4742ae3b..96723b53a4e9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -402,7 +402,7 @@ esdhc: esdhc@2140000 { status = "disabled"; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; @@ -413,7 +413,7 @@ usb0: usb3@3100000 { status = "disabled"; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 41102dacc2e1..d356ec2beee3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -737,7 +737,7 @@ sata1: sata@3210000 { dma-coherent; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -748,7 +748,7 @@ usb0: usb3@3100000 { snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>;
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++--- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-)