diff mbox series

[RFC,4.19.y-cip,38/50] PCI: rcar: Move shareable code to a common file

Message ID 20201012141933.9652-39-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Superseded
Headers show
Series Add PCIe EP support for Renesas R-Car Gen3 and RZ/G2x | expand

Commit Message

Lad Prabhakar Oct. 12, 2020, 2:19 p.m. UTC
commit 78a0d7f2f5a31357bce68012d886507b4cf33598 upstream.

Move shareable code to common file pcie-rcar.c and the #defines to
pcie-rcar.h so that the common code can be reused with endpoint driver.
There are no functional changes with this patch for the host controller
driver.

Link: https://lore.kernel.org/r/1588854799-13710-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[PL: Dropped changes to pcie-rcar-host.c as it doesnt apply cleanly and
manually applying the changes would result in huge change]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pci/controller/pcie-rcar.c | 117 ++++++++++++++++++++++++++
 drivers/pci/controller/pcie-rcar.h | 131 +++++++++++++++++++++++++++++
 2 files changed, 248 insertions(+)
 create mode 100644 drivers/pci/controller/pcie-rcar.c
 create mode 100644 drivers/pci/controller/pcie-rcar.h

Comments

Pavel Machek Oct. 21, 2020, 7:06 p.m. UTC | #1
Hi!

> commit 78a0d7f2f5a31357bce68012d886507b4cf33598 upstream.
> 
> Move shareable code to common file pcie-rcar.c and the #defines to
> pcie-rcar.h so that the common code can be reused with endpoint driver.
> There are no functional changes with this patch for the host controller
> driver.

Whoa.

So... original patch _moved_ shared code to new place.

This version creates another copy of shared code, probably subtly
different from the other one.

Is that good idea? Won't two copies cause problems depending on
.config? Could we share code, as the mainline does?

Anyway, patches up to previous one -- [37/50] arm64: defconfig: Enable
CONFIG_PCIE_RCAR_HOST look okay to me, so if you can send them as
non-RFC version, I cal likely apply them.

Best regards,
								Pavel
Lad Prabhakar Oct. 21, 2020, 8:28 p.m. UTC | #2
Hi Pavel,

Thank you for the review.

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 21 October 2020 20:07
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>; Biju Das
> <biju.das.jz@bp.renesas.com>
> Subject: Re: [RFC PATCH 4.19.y-cip 38/50] PCI: rcar: Move shareable code to a common file
> 
> Hi!
> 
> > commit 78a0d7f2f5a31357bce68012d886507b4cf33598 upstream.
> >
> > Move shareable code to common file pcie-rcar.c and the #defines to
> > pcie-rcar.h so that the common code can be reused with endpoint driver.
> > There are no functional changes with this patch for the host controller
> > driver.
> 
> Whoa.
> 
> So... original patch _moved_ shared code to new place.
> 
> This version creates another copy of shared code, probably subtly
> different from the other one.
> 
> Is that good idea? Won't two copies cause problems depending on
> .config? Could we share code, as the mainline does?
> 
My main concern was this produces a big diff which would make it difficult for review. And CONFIG_PCIE_RCAR_HOST by default selects CONFIG_PCIE_RCAR which builds the host driver.
pcie-rcar.c is the same as mainline only that pcie-rcar-host.c is untouched here.

If you are OK ill post the similar changes to pcie-rcar-host.c as done in the actual upstream patch.

> Anyway, patches up to previous one -- [37/50] arm64: defconfig: Enable
> CONFIG_PCIE_RCAR_HOST look okay to me, so if you can send them as
> non-RFC version, I cal likely apply them.
> 
I shall get on posting the 2nd bunch of non-RFC.

Cheers,
Prabhakar

> Best regards,
> 								Pavel
> 
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5637): https://lists.cip-project.org/g/cip-dev/message/5637
Mute This Topic: https://lists.cip-project.org/mt/77461717/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-
Pavel Machek Oct. 22, 2020, 7:42 p.m. UTC | #3
Hi!

> > > commit 78a0d7f2f5a31357bce68012d886507b4cf33598 upstream.
> > >
> > > Move shareable code to common file pcie-rcar.c and the #defines to
> > > pcie-rcar.h so that the common code can be reused with endpoint driver.
> > > There are no functional changes with this patch for the host controller
> > > driver.
> > 
> > Whoa.
> > 
> > So... original patch _moved_ shared code to new place.
> > 
> > This version creates another copy of shared code, probably subtly
> > different from the other one.
> > 
> > Is that good idea? Won't two copies cause problems depending on
> > .config? Could we share code, as the mainline does?
> > 
> My main concern was this produces a big diff which would make it difficult for review. And CONFIG_PCIE_RCAR_HOST by default selects CONFIG_PCIE_RCAR which builds the host driver.
> pcie-rcar.c is the same as mainline only that pcie-rcar-host.c is untouched here.
> 
> If you are OK ill post the similar changes to pcie-rcar-host.c as done in the actual upstream patch.
>

I'm not 100% sure what you are proposing, but let's do that. We should
not end with two copies of the identical code in -cip, right?

> > Anyway, patches up to previous one -- [37/50] arm64: defconfig: Enable
> > CONFIG_PCIE_RCAR_HOST look okay to me, so if you can send them as
> > non-RFC version, I cal likely apply them.
> > 
> I shall get on posting the 2nd bunch of non-RFC.

I believe we are ready for rest of the patches.

Best regards,
								Pavel
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
new file mode 100644
index 000000000000..cf8840d180c3
--- /dev/null
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -0,0 +1,117 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe driver for Renesas R-Car SoCs
+ *  Copyright (C) 2014-2020 Renesas Electronics Europe Ltd
+ *
+ * Author: Phil Edworthy <phil.edworthy@renesas.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include "pcie-rcar.h"
+
+void rcar_pci_write_reg(struct rcar_pcie *pcie, u32 val, unsigned int reg)
+{
+	writel(val, pcie->base + reg);
+}
+
+u32 rcar_pci_read_reg(struct rcar_pcie *pcie, unsigned int reg)
+{
+	return readl(pcie->base + reg);
+}
+
+void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
+{
+	unsigned int shift = BITS_PER_BYTE * (where & 3);
+	u32 val = rcar_pci_read_reg(pcie, where & ~3);
+
+	val &= ~(mask << shift);
+	val |= data << shift;
+	rcar_pci_write_reg(pcie, val, where & ~3);
+}
+
+int rcar_pcie_wait_for_phyrdy(struct rcar_pcie *pcie)
+{
+	unsigned int timeout = 10;
+
+	while (timeout--) {
+		if (rcar_pci_read_reg(pcie, PCIEPHYSR) & PHYRDY)
+			return 0;
+
+		msleep(5);
+	}
+
+	return -ETIMEDOUT;
+}
+
+int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie)
+{
+	unsigned int timeout = 10000;
+
+	while (timeout--) {
+		if ((rcar_pci_read_reg(pcie, PCIETSTR) & DATA_LINK_ACTIVE))
+			return 0;
+
+		udelay(5);
+		cpu_relax();
+	}
+
+	return -ETIMEDOUT;
+}
+
+void rcar_pcie_set_outbound(struct rcar_pcie *pcie, int win,
+			    struct resource_entry *window)
+{
+	/* Setup PCIe address space mappings for each resource */
+	struct resource *res = window->res;
+	resource_size_t res_start;
+	resource_size_t size;
+	u32 mask;
+
+	rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win));
+
+	/*
+	 * The PAMR mask is calculated in units of 128Bytes, which
+	 * keeps things pretty simple.
+	 */
+	size = resource_size(res);
+	mask = (roundup_pow_of_two(size) / SZ_128) - 1;
+	rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
+
+	if (res->flags & IORESOURCE_IO)
+		res_start = pci_pio_to_address(res->start) - window->offset;
+	else
+		res_start = res->start - window->offset;
+
+	rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win));
+	rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F,
+			   PCIEPALR(win));
+
+	/* First resource is for IO */
+	mask = PAR_ENABLE;
+	if (res->flags & IORESOURCE_IO)
+		mask |= IO_SPACE;
+
+	rcar_pci_write_reg(pcie, mask, PCIEPTCTLR(win));
+}
+
+void rcar_pcie_set_inbound(struct rcar_pcie *pcie, u64 cpu_addr,
+			   u64 pci_addr, u64 flags, int idx, bool host)
+{
+	/*
+	 * Set up 64-bit inbound regions as the range parser doesn't
+	 * distinguish between 32 and 64-bit types.
+	 */
+	if (host)
+		rcar_pci_write_reg(pcie, lower_32_bits(pci_addr),
+				   PCIEPRAR(idx));
+	rcar_pci_write_reg(pcie, lower_32_bits(cpu_addr), PCIELAR(idx));
+	rcar_pci_write_reg(pcie, flags, PCIELAMR(idx));
+
+	if (host)
+		rcar_pci_write_reg(pcie, upper_32_bits(pci_addr),
+				   PCIEPRAR(idx + 1));
+	rcar_pci_write_reg(pcie, upper_32_bits(cpu_addr), PCIELAR(idx + 1));
+	rcar_pci_write_reg(pcie, 0, PCIELAMR(idx + 1));
+}
diff --git a/drivers/pci/controller/pcie-rcar.h b/drivers/pci/controller/pcie-rcar.h
new file mode 100644
index 000000000000..97640e16af58
--- /dev/null
+++ b/drivers/pci/controller/pcie-rcar.h
@@ -0,0 +1,131 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PCIe driver for Renesas R-Car SoCs
+ *  Copyright (C) 2014-2020 Renesas Electronics Europe Ltd
+ *
+ * Author: Phil Edworthy <phil.edworthy@renesas.com>
+ */
+
+#ifndef _PCIE_RCAR_H
+#define _PCIE_RCAR_H
+
+#define PCIECAR			0x000010
+#define PCIECCTLR		0x000018
+#define  CONFIG_SEND_ENABLE	BIT(31)
+#define  TYPE0			(0 << 8)
+#define  TYPE1			BIT(8)
+#define PCIECDR			0x000020
+#define PCIEMSR			0x000028
+#define PCIEINTXR		0x000400
+#define PCIEPHYSR		0x0007f0
+#define  PHYRDY			BIT(0)
+#define PCIEMSITXR		0x000840
+
+/* Transfer control */
+#define PCIETCTLR		0x02000
+#define  DL_DOWN		BIT(3)
+#define  CFINIT			BIT(0)
+#define PCIETSTR		0x02004
+#define  DATA_LINK_ACTIVE	BIT(0)
+#define PCIEERRFR		0x02020
+#define  UNSUPPORTED_REQUEST	BIT(4)
+#define PCIEMSIFR		0x02044
+#define PCIEMSIALR		0x02048
+#define  MSIFE			BIT(0)
+#define PCIEMSIAUR		0x0204c
+#define PCIEMSIIER		0x02050
+
+/* root port address */
+#define PCIEPRAR(x)		(0x02080 + ((x) * 0x4))
+
+/* local address reg & mask */
+#define PCIELAR(x)		(0x02200 + ((x) * 0x20))
+#define PCIELAMR(x)		(0x02208 + ((x) * 0x20))
+#define  LAM_PREFETCH		BIT(3)
+#define  LAM_64BIT		BIT(2)
+#define  LAR_ENABLE		BIT(1)
+
+/* PCIe address reg & mask */
+#define PCIEPALR(x)		(0x03400 + ((x) * 0x20))
+#define PCIEPAUR(x)		(0x03404 + ((x) * 0x20))
+#define PCIEPAMR(x)		(0x03408 + ((x) * 0x20))
+#define PCIEPTCTLR(x)		(0x0340c + ((x) * 0x20))
+#define  PAR_ENABLE		BIT(31)
+#define  IO_SPACE		BIT(8)
+
+/* Configuration */
+#define PCICONF(x)		(0x010000 + ((x) * 0x4))
+#define PMCAP(x)		(0x010040 + ((x) * 0x4))
+#define EXPCAP(x)		(0x010070 + ((x) * 0x4))
+#define VCCAP(x)		(0x010100 + ((x) * 0x4))
+
+/* link layer */
+#define IDSETR1			0x011004
+#define TLCTLR			0x011048
+#define MACSR			0x011054
+#define  SPCHGFIN		BIT(4)
+#define  SPCHGFAIL		BIT(6)
+#define  SPCHGSUC		BIT(7)
+#define  LINK_SPEED		(0xf << 16)
+#define  LINK_SPEED_2_5GTS	(1 << 16)
+#define  LINK_SPEED_5_0GTS	(2 << 16)
+#define MACCTLR			0x011058
+#define  MACCTLR_NFTS_MASK	GENMASK(23, 16)	/* The name is from SH7786 */
+#define  SPEED_CHANGE		BIT(24)
+#define  SCRAMBLE_DISABLE	BIT(27)
+#define  LTSMDIS		BIT(31)
+#define  MACCTLR_INIT_VAL	(LTSMDIS | MACCTLR_NFTS_MASK)
+#define PMSR			0x01105c
+#define MACS2R			0x011078
+#define MACCGSPSETR		0x011084
+#define  SPCNGRSN		BIT(31)
+
+/* R-Car H1 PHY */
+#define H1_PCIEPHYADRR		0x04000c
+#define  WRITE_CMD		BIT(16)
+#define  PHY_ACK		BIT(24)
+#define  RATE_POS		12
+#define  LANE_POS		8
+#define  ADR_POS		0
+#define H1_PCIEPHYDOUTR		0x040014
+
+/* R-Car Gen2 PHY */
+#define GEN2_PCIEPHYADDR	0x780
+#define GEN2_PCIEPHYDATA	0x784
+#define GEN2_PCIEPHYCTRL	0x78c
+
+#define INT_PCI_MSI_NR		32
+
+#define RCONF(x)		(PCICONF(0) + (x))
+#define RPMCAP(x)		(PMCAP(0) + (x))
+#define REXPCAP(x)		(EXPCAP(0) + (x))
+#define RVCCAP(x)		(VCCAP(0) + (x))
+
+#define PCIE_CONF_BUS(b)	(((b) & 0xff) << 24)
+#define PCIE_CONF_DEV(d)	(((d) & 0x1f) << 19)
+#define PCIE_CONF_FUNC(f)	(((f) & 0x7) << 16)
+
+#define RCAR_PCI_MAX_RESOURCES	4
+#define MAX_NR_INBOUND_MAPS	6
+
+struct rcar_pcie {
+	struct device		*dev;
+	void __iomem		*base;
+};
+
+enum {
+	RCAR_PCI_ACCESS_READ,
+	RCAR_PCI_ACCESS_WRITE,
+};
+
+void rcar_pci_write_reg(struct rcar_pcie *pcie, u32 val, unsigned int reg);
+u32 rcar_pci_read_reg(struct rcar_pcie *pcie, unsigned int reg);
+void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data);
+int rcar_pcie_wait_for_phyrdy(struct rcar_pcie *pcie);
+int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie);
+void rcar_pcie_set_outbound(struct rcar_pcie *pcie, int win,
+			    struct resource_entry *window);
+void rcar_pcie_set_inbound(struct rcar_pcie *pcie, u64 cpu_addr,
+			   u64 pci_addr, u64 flags, int idx, bool host);
+
+#endif