| Message ID | 20201022220636.609956-1-mdf@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [PATCH/RFC,net] net: dec: tulip: de2104x: Add shutdown handler to stop NIC | expand |
On Thu, 2020-10-22 at 15:06 -0700, Moritz Fischer wrote: > The driver does not implement a shutdown handler which leads to > issues > when using kexec in certain scenarios. The NIC keeps on fetching > descriptors which gets flagged by the IOMMU with errors like this: > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > Signed-off-by: Moritz Fischer <mdf@kernel.org> > --- > > Hi all, > > I'm not sure if this is the proper way for a shutdown handler, > I've tried to look at a bunch of examples and couldn't find a > specific > solution, in my tests on hardware this works, though. > > Open to suggestions. > > Thanks, > Moritz > > --- > drivers/net/ethernet/dec/tulip/de2104x.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c > b/drivers/net/ethernet/dec/tulip/de2104x.c > index f1a2da15dd0a..372c62c7e60f 100644 > --- a/drivers/net/ethernet/dec/tulip/de2104x.c > +++ b/drivers/net/ethernet/dec/tulip/de2104x.c > @@ -2185,6 +2185,7 @@ static struct pci_driver de_driver = { > .id_table = de_pci_tbl, > .probe = de_init_one, > .remove = de_remove_one, > + .shutdown = de_remove_one, This doesn't look right: shutdown is supposed to turn off the device without disturbing the tree or causing any knock on effects (I think that rule is mostly because you don't want anything in userspace triggering since it's likely to be nearly dead). Remove removes the device from the tree and cleans up everything. I think the function you want that's closest to what shutdown needs is de_close(). That basically just turns off the chip and frees the interrupt ... you'll have to wrapper it to call it from the pci_driver, though. James
On Thu, Oct 22, 2020 at 04:04:16PM -0700, James Bottomley wrote: > On Thu, 2020-10-22 at 15:06 -0700, Moritz Fischer wrote: > > The driver does not implement a shutdown handler which leads to > > issues > > when using kexec in certain scenarios. The NIC keeps on fetching > > descriptors which gets flagged by the IOMMU with errors like this: > > > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 > > > > Signed-off-by: Moritz Fischer <mdf@kernel.org> > > --- > > > > Hi all, > > > > I'm not sure if this is the proper way for a shutdown handler, > > I've tried to look at a bunch of examples and couldn't find a > > specific > > solution, in my tests on hardware this works, though. > > > > Open to suggestions. > > > > Thanks, > > Moritz > > > > --- > > drivers/net/ethernet/dec/tulip/de2104x.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c > > b/drivers/net/ethernet/dec/tulip/de2104x.c > > index f1a2da15dd0a..372c62c7e60f 100644 > > --- a/drivers/net/ethernet/dec/tulip/de2104x.c > > +++ b/drivers/net/ethernet/dec/tulip/de2104x.c > > @@ -2185,6 +2185,7 @@ static struct pci_driver de_driver = { > > .id_table = de_pci_tbl, > > .probe = de_init_one, > > .remove = de_remove_one, > > + .shutdown = de_remove_one, > > This doesn't look right: shutdown is supposed to turn off the device > without disturbing the tree or causing any knock on effects (I think > that rule is mostly because you don't want anything in userspace > triggering since it's likely to be nearly dead). Remove removes the > device from the tree and cleans up everything. I think the function > you want that's closest to what shutdown needs is de_close(). That > basically just turns off the chip and frees the interrupt ... you'll > have to wrapper it to call it from the pci_driver, though. Thanks for the suggestion, I like that better. I'll send a v2 after testing. I think anything that hits on de_stop_hw() will keep the NIC from fetching further descriptors. Cheers, Moritz
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c index f1a2da15dd0a..372c62c7e60f 100644 --- a/drivers/net/ethernet/dec/tulip/de2104x.c +++ b/drivers/net/ethernet/dec/tulip/de2104x.c @@ -2185,6 +2185,7 @@ static struct pci_driver de_driver = { .id_table = de_pci_tbl, .probe = de_init_one, .remove = de_remove_one, + .shutdown = de_remove_one, #ifdef CONFIG_PM .suspend = de_suspend, .resume = de_resume,
The driver does not implement a shutdown handler which leads to issues when using kexec in certain scenarios. The NIC keeps on fetching descriptors which gets flagged by the IOMMU with errors like this: DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 Signed-off-by: Moritz Fischer <mdf@kernel.org> --- Hi all, I'm not sure if this is the proper way for a shutdown handler, I've tried to look at a bunch of examples and couldn't find a specific solution, in my tests on hardware this works, though. Open to suggestions. Thanks, Moritz --- drivers/net/ethernet/dec/tulip/de2104x.c | 1 + 1 file changed, 1 insertion(+)