| Message ID | 1603441493-18554-4-git-send-email-hector.yuan@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1,1/6] cpufreq: mediatek-hw: Add support for CPUFREQ HW | expand |
On 23-10-20, 16:24, Hector Yuan wrote: > From: "Hector.Yuan" <hector.yuan@mediatek.com> > > Add devicetree bindings for MediaTek HW driver. > > Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> > --- > .../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > new file mode 100644 > index 0000000..a99f44f > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > @@ -0,0 +1,46 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek's CPUFREQ Bindings > + > +maintainers: > + - Hector Yuan <hector.yuan@mediatek.com> > + > +description: > + CPUFREQ HW is a hardware engine used by MediaTek > + SoCs to manage frequency in hardware. It is capable of controlling frequency > + for multiple clusters. > + > +properties: > + compatible: > + const: mediatek,cpufreq-hw > + > + reg: > + minItems: 1 > + maxItems: 2 > + description: | > + Addresses and sizes for the memory of the HW bases in each frequency domain. > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpufreq_hw: cpufreq@11bc00 { > + compatible = "mediatek,cpufreq-hw"; > + reg = <0 0x11bc10 0 0x8c>, > + <0 0x11bca0 0 0x8c>; > + }; > + }; You still need to keep the CPU specific part here and explain how this block is going to get used using the other binding you added.
On Fri, 23 Oct 2020 16:24:50 +0800, Hector Yuan wrote: > From: "Hector.Yuan" <hector.yuan@mediatek.com> > > Add devicetree bindings for MediaTek HW driver. > > Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> > --- > .../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 46 ++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml:46:1: [warning] too many blank lines (4 > 1) (empty-lines) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1386572 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Fri, 2020-10-23 at 11:15 -0500, Rob Herring wrote: > On Fri, 23 Oct 2020 16:24:50 +0800, Hector Yuan wrote: > > From: "Hector.Yuan" <hector.yuan@mediatek.com> > > > > Add devicetree bindings for MediaTek HW driver. > > > > Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> > > --- > > .../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 46 ++++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > ./Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml:46:1: [warning] too many blank lines (4 > 1) (empty-lines) > > dtschema/dtc warnings/errors: > > > See https://patchwork.ozlabs.org/patch/1386572 > > The base for the patch is generally the last rc1. Any dependencies > should be noted. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. > OK, will fix this warning in v8.
On Fri, 2020-10-23 at 14:05 +0530, Viresh Kumar wrote: > On 23-10-20, 16:24, Hector Yuan wrote: > > From: "Hector.Yuan" <hector.yuan@mediatek.com> > > > > Add devicetree bindings for MediaTek HW driver. > > > > Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> > > --- > > .../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 46 ++++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > > > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > > new file mode 100644 > > index 0000000..a99f44f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml > > @@ -0,0 +1,46 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: MediaTek's CPUFREQ Bindings > > + > > +maintainers: > > + - Hector Yuan <hector.yuan@mediatek.com> > > + > > +description: > > + CPUFREQ HW is a hardware engine used by MediaTek > > + SoCs to manage frequency in hardware. It is capable of controlling frequency > > + for multiple clusters. > > + > > +properties: > > + compatible: > > + const: mediatek,cpufreq-hw > > + > > + reg: > > + minItems: 1 > > + maxItems: 2 > > + description: | > > + Addresses and sizes for the memory of the HW bases in each frequency domain. > > + > > +required: > > + - compatible > > + - reg > > + > > +examples: > > + - | > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpufreq_hw: cpufreq@11bc00 { > > + compatible = "mediatek,cpufreq-hw"; > > + reg = <0 0x11bc10 0 0x8c>, > > + <0 0x11bca0 0 0x8c>; > > + }; > > + }; > > You still need to keep the CPU specific part here and explain how this > block is going to get used using the other binding you added. > OK, will add cpu part here in v8.
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml new file mode 100644 index 0000000..a99f44f --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek's CPUFREQ Bindings + +maintainers: + - Hector Yuan <hector.yuan@mediatek.com> + +description: + CPUFREQ HW is a hardware engine used by MediaTek + SoCs to manage frequency in hardware. It is capable of controlling frequency + for multiple clusters. + +properties: + compatible: + const: mediatek,cpufreq-hw + + reg: + minItems: 1 + maxItems: 2 + description: | + Addresses and sizes for the memory of the HW bases in each frequency domain. + +required: + - compatible + - reg + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + cpufreq_hw: cpufreq@11bc00 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x11bc10 0 0x8c>, + <0 0x11bca0 0 0x8c>; + }; + }; + + + +