Message ID | 20201024162515.30032-4-wens@kernel.org (mailing list archive) |
---|---|
State | Mainlined, archived |
Headers | show |
Series | [01/10] Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" | expand |
Dne sobota, 24. oktober 2020 ob 18:25:09 CET je Chen-Yu Tsai napisal(a): > From: Chen-Yu Tsai <wens@csie.org> > > The Ethernet PHY on the Bananapi M1+ has the RX and TX delays > enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. > > Fix the phy-mode description to correct reflect this so that the > implementation doesn't reconfigure the delays incorrectly. This > happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e > rx/tx delay config"). > > Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") > Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Best regards, Jernej
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 32d5d45a35c0..8945dbb114a2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -130,7 +130,7 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; };