| Message ID | 20201026181528.163143-5-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: samsung: minor node name cleanups | expand |
On 26.10.2020 19:15, Krzysztof Kozlowski wrote: > The Devicetree specification expects device node names to have a generic > name, representing the class of a device. Also the convention for node > names is to use hyphens, not underscores. > > No functional changes. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++---- > arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +- > .../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +- > arch/arm/boot/dts/exynos4412-midas.dtsi | 12 +++++------ > arch/arm/boot/dts/exynos4412-n710x.dts | 2 +- > .../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++---- > arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++-- > arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++------- > arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++---------- > 9 files changed, 36 insertions(+), 36 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > index 89ed81fb348d..db91678f5648 100644 > --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > @@ -15,7 +15,7 @@ aliases { > i2c10 = &i2c_cm36651; > }; > > - aat1290 { > + led-controller { > compatible = "skyworks,aat1290"; > flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; > enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; > @@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 { > #size-cells = <0>; > status = "okay"; > > - ak8975@c { > + magnetometer@c { > compatible = "asahi-kasei,ak8975"; > reg = <0x0c>; > gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; > @@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 { > #address-cells = <1>; > #size-cells = <0>; > > - cm36651@18 { > + sensor@18 { light-sensor? > compatible = "capella,cm36651"; > reg = <0x18>; > interrupt-parent = <&gpx0>; > @@ -133,7 +133,7 @@ timing-0 { > }; > > &i2c_3 { > - mms114-touchscreen@48 { > + touchscreen@48 { > compatible = "melfas,mms114"; > reg = <0x48>; > interrupt-parent = <&gpm2>; > diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts > index f6d0a5f5d339..3063e44fcbcc 100644 > --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts > +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts > @@ -175,7 +175,7 @@ &i2c_4 { > pinctrl-names = "default"; > status = "okay"; > > - codec: wm8960@1a { > + codec: codec@1a { audio-codec? > compatible = "wlf,wm8960"; > reg = <0x1a>; > clocks = <&pmu_system_controller 0>; > diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi > index dfceb155b3a7..4583d342af39 100644 > --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi > +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi > @@ -134,7 +134,7 @@ &i2c_1 { > pinctrl-names = "default"; > status = "okay"; > > - s5m8767: s5m8767-pmic@66 { > + s5m8767: pmic@66 { > compatible = "samsung,s5m8767-pmic"; > reg = <0x66>; > > diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi > index 7e7c243ff196..52a4f6e6c7f2 100644 > --- a/arch/arm/boot/dts/exynos4412-midas.dtsi > +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi > @@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 { > #size-cells = <0>; > status = "okay"; > > - max77693-fuel-gauge@36 { > + fuel-gauge@36 { > compatible = "maxim,max17047"; > interrupt-parent = <&gpx2>; > interrupts = <3 IRQ_TYPE_EDGE_FALLING>; > @@ -550,7 +550,7 @@ &i2c_0 { > pinctrl-names = "default"; > status = "okay"; > > - s5c73m3: s5c73m3@3c { > + s5c73m3: sensor@3c { image-sensor? > compatible = "samsung,s5c73m3"; > reg = <0x3c>; > xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ > @@ -577,7 +577,7 @@ &i2c1_isp { > pinctrl-0 = <&fimc_is_i2c1>; > pinctrl-names = "default"; > > - s5k6a3@10 { > + sensor@10 { image-sensor? > compatible = "samsung,s5k6a3"; > reg = <0x10>; > svdda-supply = <&cam_io_reg>; > @@ -616,7 +616,7 @@ &i2c_4 { > pinctrl-names = "default"; > status = "okay"; > > - wm1811: wm1811@1a { > + wm1811: codec@1a { audio-codec? > compatible = "wlf,wm1811"; > reg = <0x1a>; > clocks = <&pmu_system_controller 0>, > @@ -665,7 +665,7 @@ &i2c_7 { > pinctrl-names = "default"; > status = "okay"; > > - max77686: max77686_pmic@9 { > + max77686: pmic@9 { > compatible = "maxim,max77686"; > interrupt-parent = <&gpx0>; > interrupts = <7 IRQ_TYPE_NONE>; > @@ -1407,7 +1407,7 @@ &spi_1 { > cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; > status = "okay"; > > - s5c73m3_spi: s5c73m3@0 { > + s5c73m3_spi: sensor@0 { image-sensor? > compatible = "samsung,s5c73m3"; > spi-max-frequency = <50000000>; > reg = <0>; > diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts > index a47b7f35fc80..c49dbb7847b8 100644 > --- a/arch/arm/boot/dts/exynos4412-n710x.dts > +++ b/arch/arm/boot/dts/exynos4412-n710x.dts > @@ -45,7 +45,7 @@ &i2c_3 { > pinctrl-names = "default"; > status = "okay"; > > - mms152-touchscreen@48 { > + touchscreen@48 { > compatible = "melfas,mms152"; > reg = <0x48>; > interrupt-parent = <&gpm2>; > diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > index c3b6e6d367ab..3dcd7f7f10f3 100644 > --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > @@ -27,7 +27,7 @@ gpio_keys: gpio-keys { > pinctrl-names = "default"; > pinctrl-0 = <&gpio_power_key>; > > - power_key { > + power-key { > gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; > linux,code = <KEY_POWER>; > label = "power key"; > @@ -171,7 +171,7 @@ cooling_map1: map1 { > }; > > &pinctrl_1 { > - gpio_power_key: power_key { > + gpio_power_key: power-key { > samsung,pins = "gpx1-3"; > samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > }; > @@ -266,7 +266,7 @@ &i2c_0 { > samsung,i2c-max-bus-freq = <400000>; > status = "okay"; > > - usb3503: usb3503@8 { > + usb3503: usb-hub@8 { > compatible = "smsc,usb3503"; > reg = <0x08>; > > @@ -492,7 +492,7 @@ buck8_reg: BUCK8 { > > &i2c_1 { > status = "okay"; > - max98090: max98090@10 { > + max98090: codec@10 { audio-codec? > compatible = "maxim,max98090"; > reg = <0x10>; > interrupt-parent = <&gpx0>; > diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts > index 68fe88074d1d..46381e9097f4 100644 > --- a/arch/arm/boot/dts/exynos4412-odroidx.dts > +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts > @@ -36,7 +36,7 @@ led2 { > }; > }; > > - regulator_p3v3 { > + regulator-1 { > compatible = "regulator-fixed"; > regulator-name = "p3v3_en"; > regulator-min-microvolt = <3300000>; > @@ -81,7 +81,7 @@ &mshc_0 { > }; > > &pinctrl_1 { > - gpio_home_key: home_key { > + gpio_home_key: home-key { > samsung,pins = "gpx2-2"; > samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > }; > diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts > index c2e793b69e7d..e1f6de53e20e 100644 > --- a/arch/arm/boot/dts/exynos4412-origen.dts > +++ b/arch/arm/boot/dts/exynos4412-origen.dts > @@ -116,7 +116,7 @@ &i2c_0 { > pinctrl-names = "default"; > status = "okay"; > > - s5m8767_pmic@66 { > + pmic@66 { > compatible = "samsung,s5m8767-pmic"; > reg = <0x66>; > > @@ -453,37 +453,37 @@ &keypad { > pinctrl-names = "default"; > status = "okay"; > > - key_home { > + key-home { > keypad,row = <0>; > keypad,column = <0>; > linux,code = <KEY_HOME>; > }; > > - key_down { > + key-down { > keypad,row = <0>; > keypad,column = <1>; > linux,code = <KEY_DOWN>; > }; > > - key_up { > + key-up { > keypad,row = <1>; > keypad,column = <0>; > linux,code = <KEY_UP>; > }; > > - key_menu { > + key-menu { > keypad,row = <1>; > keypad,column = <1>; > linux,code = <KEY_MENU>; > }; > > - key_back { > + key-back { > keypad,row = <2>; > keypad,column = <0>; > linux,code = <KEY_BACK>; > }; > > - key_enter { > + key-enter { > keypad,row = <2>; > keypad,column = <1>; > linux,code = <KEY_ENTER>; > diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts > index 49971203a8aa..cc99b955af0c 100644 > --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts > +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > @@ -71,61 +71,61 @@ &keypad { > pinctrl-names = "default"; > status = "okay"; > > - key_1 { > + key-1 { > keypad,row = <1>; > keypad,column = <3>; > linux,code = <2>; > }; > > - key_2 { > + key-2 { > keypad,row = <1>; > keypad,column = <4>; > linux,code = <3>; > }; > > - key_3 { > + key-3 { > keypad,row = <1>; > keypad,column = <5>; > linux,code = <4>; > }; > > - key_4 { > + key-4 { > keypad,row = <1>; > keypad,column = <6>; > linux,code = <5>; > }; > > - key_5 { > + key-5 { > keypad,row = <1>; > keypad,column = <7>; > linux,code = <6>; > }; > > - key_A { > + key-A { > keypad,row = <2>; > keypad,column = <6>; > linux,code = <30>; > }; > > - key_B { > + key-B { > keypad,row = <2>; > keypad,column = <7>; > linux,code = <48>; > }; > > - key_C { > + key-C { > keypad,row = <0>; > keypad,column = <5>; > linux,code = <46>; > }; > > - key_D { > + key-D { > keypad,row = <2>; > keypad,column = <5>; > linux,code = <32>; > }; > > - key_E { > + key-E { > keypad,row = <0>; > keypad,column = <7>; > linux,code = <18>; Best regards
On Mon, Oct 26, 2020 at 10:02:10PM +0100, Marek Szyprowski wrote: > > On 26.10.2020 19:15, Krzysztof Kozlowski wrote: > > The Devicetree specification expects device node names to have a generic > > name, representing the class of a device. Also the convention for node > > names is to use hyphens, not underscores. > > > > No functional changes. > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > --- > > arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++---- > > arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +- > > .../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +- > > arch/arm/boot/dts/exynos4412-midas.dtsi | 12 +++++------ > > arch/arm/boot/dts/exynos4412-n710x.dts | 2 +- > > .../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++---- > > arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++-- > > arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++------- > > arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++---------- > > 9 files changed, 36 insertions(+), 36 deletions(-) > > > > diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > > index 89ed81fb348d..db91678f5648 100644 > > --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > > +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > > @@ -15,7 +15,7 @@ aliases { > > i2c10 = &i2c_cm36651; > > }; > > > > - aat1290 { > > + led-controller { > > compatible = "skyworks,aat1290"; > > flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; > > enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; > > @@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 { > > #size-cells = <0>; > > status = "okay"; > > > > - ak8975@c { > > + magnetometer@c { > > compatible = "asahi-kasei,ak8975"; > > reg = <0x0c>; > > gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; > > @@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 { > > #address-cells = <1>; > > #size-cells = <0>; > > > > - cm36651@18 { > > + sensor@18 { > light-sensor? Ack, to this and all following. Thanks. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 89ed81fb348d..db91678f5648 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,7 +15,7 @@ aliases { i2c10 = &i2c_cm36651; }; - aat1290 { + led-controller { compatible = "skyworks,aat1290"; flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; @@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 { #size-cells = <0>; status = "okay"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 { #address-cells = <1>; #size-cells = <0>; - cm36651@18 { + sensor@18 { compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; @@ -133,7 +133,7 @@ timing-0 { }; &i2c_3 { - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index f6d0a5f5d339..3063e44fcbcc 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -175,7 +175,7 @@ &i2c_4 { pinctrl-names = "default"; status = "okay"; - codec: wm8960@1a { + codec: codec@1a { compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index dfceb155b3a7..4583d342af39 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -134,7 +134,7 @@ &i2c_1 { pinctrl-names = "default"; status = "okay"; - s5m8767: s5m8767-pmic@66 { + s5m8767: pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 7e7c243ff196..52a4f6e6c7f2 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 { #size-cells = <0>; status = "okay"; - max77693-fuel-gauge@36 { + fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; @@ -550,7 +550,7 @@ &i2c_0 { pinctrl-names = "default"; status = "okay"; - s5c73m3: s5c73m3@3c { + s5c73m3: sensor@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ @@ -577,7 +577,7 @@ &i2c1_isp { pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; - s5k6a3@10 { + sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; @@ -616,7 +616,7 @@ &i2c_4 { pinctrl-names = "default"; status = "okay"; - wm1811: wm1811@1a { + wm1811: codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&pmu_system_controller 0>, @@ -665,7 +665,7 @@ &i2c_7 { pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -1407,7 +1407,7 @@ &spi_1 { cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3@0 { + s5c73m3_spi: sensor@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index a47b7f35fc80..c49dbb7847b8 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -45,7 +45,7 @@ &i2c_3 { pinctrl-names = "default"; status = "okay"; - mms152-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms152"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index c3b6e6d367ab..3dcd7f7f10f3 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -27,7 +27,7 @@ gpio_keys: gpio-keys { pinctrl-names = "default"; pinctrl-0 = <&gpio_power_key>; - power_key { + power-key { gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -171,7 +171,7 @@ cooling_map1: map1 { }; &pinctrl_1 { - gpio_power_key: power_key { + gpio_power_key: power-key { samsung,pins = "gpx1-3"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; @@ -266,7 +266,7 @@ &i2c_0 { samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb3503@8 { + usb3503: usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -492,7 +492,7 @@ buck8_reg: BUCK8 { &i2c_1 { status = "okay"; - max98090: max98090@10 { + max98090: codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 68fe88074d1d..46381e9097f4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -36,7 +36,7 @@ led2 { }; }; - regulator_p3v3 { + regulator-1 { compatible = "regulator-fixed"; regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; @@ -81,7 +81,7 @@ &mshc_0 { }; &pinctrl_1 { - gpio_home_key: home_key { + gpio_home_key: home-key { samsung,pins = "gpx2-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index c2e793b69e7d..e1f6de53e20e 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -116,7 +116,7 @@ &i2c_0 { pinctrl-names = "default"; status = "okay"; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; @@ -453,37 +453,37 @@ &keypad { pinctrl-names = "default"; status = "okay"; - key_home { + key-home { keypad,row = <0>; keypad,column = <0>; linux,code = <KEY_HOME>; }; - key_down { + key-down { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_DOWN>; }; - key_up { + key-up { keypad,row = <1>; keypad,column = <0>; linux,code = <KEY_UP>; }; - key_menu { + key-menu { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_MENU>; }; - key_back { + key-back { keypad,row = <2>; keypad,column = <0>; linux,code = <KEY_BACK>; }; - key_enter { + key-enter { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_ENTER>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 49971203a8aa..cc99b955af0c 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -71,61 +71,61 @@ &keypad { pinctrl-names = "default"; status = "okay"; - key_1 { + key-1 { keypad,row = <1>; keypad,column = <3>; linux,code = <2>; }; - key_2 { + key-2 { keypad,row = <1>; keypad,column = <4>; linux,code = <3>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <5>; linux,code = <4>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <6>; linux,code = <5>; }; - key_5 { + key-5 { keypad,row = <1>; keypad,column = <7>; linux,code = <6>; }; - key_A { + key-A { keypad,row = <2>; keypad,column = <6>; linux,code = <30>; }; - key_B { + key-B { keypad,row = <2>; keypad,column = <7>; linux,code = <48>; }; - key_C { + key-C { keypad,row = <0>; keypad,column = <5>; linux,code = <46>; }; - key_D { + key-D { keypad,row = <2>; keypad,column = <5>; linux,code = <32>; }; - key_E { + key-E { keypad,row = <0>; keypad,column = <7>; linux,code = <18>;
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++---- arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +- .../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +- arch/arm/boot/dts/exynos4412-midas.dtsi | 12 +++++------ arch/arm/boot/dts/exynos4412-n710x.dts | 2 +- .../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++---- arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++-- arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++------- arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++---------- 9 files changed, 36 insertions(+), 36 deletions(-)