| Message ID | 160309732180.2739814.7243774674998010907.stgit@bahia.lan (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | spapr: Error handling fixes and cleanups (round 3) | expand |
On Mon, 19 Oct 2020 10:48:41 +0200 Greg Kurz <groug@kaod.org> wrote: > Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the > default property list of the PC DIMM device class: > > DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), > > DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, > PC_DIMM_UNASSIGNED_SLOT), > > They should thus be always gettable for both PC DIMMs and NVDIMMs. > An error in getting them can only be the result of a programming > error. It doesn't make much sense to propagate the error in this > case. Abort instead. > > Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> TODO for future, get rid of local_err in spapr_memory_plug() altogether, it should not fail. it needs moving check from spapr_drc_attach() to spapr_memory_pre_plug() time. that will clear up (a bit) road for dropping errp in spapr_memory_plug() > --- > hw/ppc/spapr.c | 17 +++-------------- > 1 file changed, 3 insertions(+), 14 deletions(-) > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > index 1b173861152f..62f217a6b914 100644 > --- a/hw/ppc/spapr.c > +++ b/hw/ppc/spapr.c > @@ -3443,19 +3443,13 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > > if (!is_nvdimm) { > addr = object_property_get_uint(OBJECT(dimm), > - PC_DIMM_ADDR_PROP, &local_err); > - if (local_err) { > - goto out_unplug; > - } > + PC_DIMM_ADDR_PROP, &error_abort); > spapr_add_lmbs(dev, addr, size, > spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT), > &local_err); > } else { > slot = object_property_get_int(OBJECT(dimm), > - PC_DIMM_SLOT_PROP, &local_err); > - if (local_err) { > - goto out_unplug; > - } > + PC_DIMM_SLOT_PROP, &error_abort); > /* We should have valid slot number at this point */ > g_assert(slot >= 0); > spapr_add_nvdimm(dev, slot, &local_err); > @@ -3634,7 +3628,6 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > DeviceState *dev, Error **errp) > { > SpaprMachineState *spapr = SPAPR_MACHINE(hotplug_dev); > - Error *local_err = NULL; > PCDIMMDevice *dimm = PC_DIMM(dev); > uint32_t nr_lmbs; > uint64_t size, addr_start, addr; > @@ -3650,11 +3643,7 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE; > > addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP, > - &local_err); > - if (local_err) { > - error_propagate(errp, local_err); > - return; > - } > + &error_abort); > > /* > * An existing pending dimm state for this DIMM means that there is an > > >
On Fri, 23 Oct 2020 21:15:09 +0200 Igor Mammedov <imammedo@redhat.com> wrote: > On Mon, 19 Oct 2020 10:48:41 +0200 > Greg Kurz <groug@kaod.org> wrote: > > > Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the > > default property list of the PC DIMM device class: > > > > DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), > > > > DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, > > PC_DIMM_UNASSIGNED_SLOT), > > > > They should thus be always gettable for both PC DIMMs and NVDIMMs. > > An error in getting them can only be the result of a programming > > error. It doesn't make much sense to propagate the error in this > > case. Abort instead. > > > > Signed-off-by: Greg Kurz <groug@kaod.org> > > Reviewed-by: Igor Mammedov <imammedo@redhat.com> > > TODO for future, > get rid of local_err in spapr_memory_plug() altogether, it should not fail. > it needs moving check from spapr_drc_attach() to spapr_memory_pre_plug() time. > > that will clear up (a bit) road for dropping errp in spapr_memory_plug() Igor, I could find time to look a bit into attaching DRCs at pre-plug and I think this isn't possible. The problem is that there doesn't seem to be a reverse operation for pre-plug. If realize fails for the DIMM device, spapr_drc_detach() wouldn't be called, which would be wrong. Am I missing something ? > > --- > > hw/ppc/spapr.c | 17 +++-------------- > > 1 file changed, 3 insertions(+), 14 deletions(-) > > > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > > index 1b173861152f..62f217a6b914 100644 > > --- a/hw/ppc/spapr.c > > +++ b/hw/ppc/spapr.c > > @@ -3443,19 +3443,13 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > > > > if (!is_nvdimm) { > > addr = object_property_get_uint(OBJECT(dimm), > > - PC_DIMM_ADDR_PROP, &local_err); > > - if (local_err) { > > - goto out_unplug; > > - } > > + PC_DIMM_ADDR_PROP, &error_abort); > > spapr_add_lmbs(dev, addr, size, > > spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT), > > &local_err); > > } else { > > slot = object_property_get_int(OBJECT(dimm), > > - PC_DIMM_SLOT_PROP, &local_err); > > - if (local_err) { > > - goto out_unplug; > > - } > > + PC_DIMM_SLOT_PROP, &error_abort); > > /* We should have valid slot number at this point */ > > g_assert(slot >= 0); > > spapr_add_nvdimm(dev, slot, &local_err); > > @@ -3634,7 +3628,6 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > DeviceState *dev, Error **errp) > > { > > SpaprMachineState *spapr = SPAPR_MACHINE(hotplug_dev); > > - Error *local_err = NULL; > > PCDIMMDevice *dimm = PC_DIMM(dev); > > uint32_t nr_lmbs; > > uint64_t size, addr_start, addr; > > @@ -3650,11 +3643,7 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE; > > > > addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP, > > - &local_err); > > - if (local_err) { > > - error_propagate(errp, local_err); > > - return; > > - } > > + &error_abort); > > > > /* > > * An existing pending dimm state for this DIMM means that there is an > > > > > > >
On Sun, 25 Oct 2020 16:24:44 +0100 Greg Kurz <groug@kaod.org> wrote: > On Fri, 23 Oct 2020 21:15:09 +0200 > Igor Mammedov <imammedo@redhat.com> wrote: > > > On Mon, 19 Oct 2020 10:48:41 +0200 > > Greg Kurz <groug@kaod.org> wrote: > > > > > Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the > > > default property list of the PC DIMM device class: > > > > > > DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), > > > > > > DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, > > > PC_DIMM_UNASSIGNED_SLOT), > > > > > > They should thus be always gettable for both PC DIMMs and NVDIMMs. > > > An error in getting them can only be the result of a programming > > > error. It doesn't make much sense to propagate the error in this > > > case. Abort instead. > > > > > > Signed-off-by: Greg Kurz <groug@kaod.org> > > > > Reviewed-by: Igor Mammedov <imammedo@redhat.com> > > > > TODO for future, > > get rid of local_err in spapr_memory_plug() altogether, it should not fail. > > it needs moving check from spapr_drc_attach() to spapr_memory_pre_plug() time. > > > > that will clear up (a bit) road for dropping errp in spapr_memory_plug() > > Igor, > > I could find time to look a bit into attaching DRCs at pre-plug and I > think this isn't possible. The problem is that there doesn't seem to be > a reverse operation for pre-plug. If realize fails for the DIMM device, > spapr_drc_detach() wouldn't be called, which would be wrong. probably I was clear enough, I didn't suggest to move spapr_drc_detach() to pre_plug time but rather do a bit of surgery along the lines: diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index 2db810f73a..59a229b4fa 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -3474,6 +3474,11 @@ static void spapr_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, return; } + get drc + if (!spapr_drc_attachable(drc)) { + error out + } + if (is_nvdimm) { spapr_nvdimm_validate(hotplug_dev, NVDIMM(dev), size, &local_err); if (local_err) { diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c index fe998d8108..ae049bc202 100644 --- a/hw/ppc/spapr_drc.c +++ b/hw/ppc/spapr_drc.c @@ -371,14 +371,16 @@ static void prop_get_fdt(Object *obj, Visitor *v, const char *name, } while (fdt_depth != 0); } -void spapr_drc_attach(SpaprDrc *drc, DeviceState *d, Error **errp) + +bool spapr_drc_attachable(SpaprDrc *drc) +{ + return !drc->dev; +} + +void spapr_drc_attach(SpaprDrc *drc, DeviceState *d) { trace_spapr_drc_attach(spapr_drc_index(drc)); - if (drc->dev) { - error_setg(errp, "an attached device is still awaiting release"); - return; - } g_assert((drc->state == SPAPR_DRC_STATE_LOGICAL_UNUSABLE) || (drc->state == SPAPR_DRC_STATE_PHYSICAL_POWERON)); > > Am I missing something ? > > > > --- > > > hw/ppc/spapr.c | 17 +++-------------- > > > 1 file changed, 3 insertions(+), 14 deletions(-) > > > > > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > > > index 1b173861152f..62f217a6b914 100644 > > > --- a/hw/ppc/spapr.c > > > +++ b/hw/ppc/spapr.c > > > @@ -3443,19 +3443,13 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > > > > > > if (!is_nvdimm) { > > > addr = object_property_get_uint(OBJECT(dimm), > > > - PC_DIMM_ADDR_PROP, &local_err); > > > - if (local_err) { > > > - goto out_unplug; > > > - } > > > + PC_DIMM_ADDR_PROP, &error_abort); > > > spapr_add_lmbs(dev, addr, size, > > > spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT), > > > &local_err); > > > } else { > > > slot = object_property_get_int(OBJECT(dimm), > > > - PC_DIMM_SLOT_PROP, &local_err); > > > - if (local_err) { > > > - goto out_unplug; > > > - } > > > + PC_DIMM_SLOT_PROP, &error_abort); > > > /* We should have valid slot number at this point */ > > > g_assert(slot >= 0); > > > spapr_add_nvdimm(dev, slot, &local_err); > > > @@ -3634,7 +3628,6 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > > DeviceState *dev, Error **errp) > > > { > > > SpaprMachineState *spapr = SPAPR_MACHINE(hotplug_dev); > > > - Error *local_err = NULL; > > > PCDIMMDevice *dimm = PC_DIMM(dev); > > > uint32_t nr_lmbs; > > > uint64_t size, addr_start, addr; > > > @@ -3650,11 +3643,7 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > > nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE; > > > > > > addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP, > > > - &local_err); > > > - if (local_err) { > > > - error_propagate(errp, local_err); > > > - return; > > > - } > > > + &error_abort); > > > > > > /* > > > * An existing pending dimm state for this DIMM means that there is an > > > > > > > > > > > >
On Tue, 27 Oct 2020 12:54:24 +0100 Igor Mammedov <imammedo@redhat.com> wrote: > On Sun, 25 Oct 2020 16:24:44 +0100 > Greg Kurz <groug@kaod.org> wrote: > > > On Fri, 23 Oct 2020 21:15:09 +0200 > > Igor Mammedov <imammedo@redhat.com> wrote: > > > > > On Mon, 19 Oct 2020 10:48:41 +0200 > > > Greg Kurz <groug@kaod.org> wrote: > > > > > > > Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the > > > > default property list of the PC DIMM device class: > > > > > > > > DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), > > > > > > > > DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, > > > > PC_DIMM_UNASSIGNED_SLOT), > > > > > > > > They should thus be always gettable for both PC DIMMs and NVDIMMs. > > > > An error in getting them can only be the result of a programming > > > > error. It doesn't make much sense to propagate the error in this > > > > case. Abort instead. > > > > > > > > Signed-off-by: Greg Kurz <groug@kaod.org> > > > > > > Reviewed-by: Igor Mammedov <imammedo@redhat.com> > > > > > > TODO for future, > > > get rid of local_err in spapr_memory_plug() altogether, it should not fail. > > > it needs moving check from spapr_drc_attach() to spapr_memory_pre_plug() time. > > > > > > that will clear up (a bit) road for dropping errp in spapr_memory_plug() > > > > Igor, > > > > I could find time to look a bit into attaching DRCs at pre-plug and I > > think this isn't possible. The problem is that there doesn't seem to be > > a reverse operation for pre-plug. If realize fails for the DIMM device, > > spapr_drc_detach() wouldn't be called, which would be wrong. > > probably I was clear enough, I didn't suggest to move spapr_drc_detach() > to pre_plug time but rather do a bit of surgery along the lines: > Ok, I get it now. I realize now I actually misread your suggestion. Sorry... > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > index 2db810f73a..59a229b4fa 100644 > --- a/hw/ppc/spapr.c > +++ b/hw/ppc/spapr.c > @@ -3474,6 +3474,11 @@ static void spapr_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > return; > } > > + get drc > + if (!spapr_drc_attachable(drc)) { > + error out > + } > + It might require some more code refactoring because the way regular PC-DIMMs are broken down into a set of logical memory blocks (LMBs), each one having its own DRC but it's certainly doable. Probably for QEMU 6.0 though since we're entering soft freeze and David already fired a PR today. > if (is_nvdimm) { > spapr_nvdimm_validate(hotplug_dev, NVDIMM(dev), size, &local_err); > if (local_err) { > diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c > index fe998d8108..ae049bc202 100644 > --- a/hw/ppc/spapr_drc.c > +++ b/hw/ppc/spapr_drc.c > @@ -371,14 +371,16 @@ static void prop_get_fdt(Object *obj, Visitor *v, const char *name, > } while (fdt_depth != 0); > } > > -void spapr_drc_attach(SpaprDrc *drc, DeviceState *d, Error **errp) > + > +bool spapr_drc_attachable(SpaprDrc *drc) > +{ > + return !drc->dev; > +} > + > +void spapr_drc_attach(SpaprDrc *drc, DeviceState *d) > { > trace_spapr_drc_attach(spapr_drc_index(drc)); > > - if (drc->dev) { > - error_setg(errp, "an attached device is still awaiting release"); > - return; > - } > g_assert((drc->state == SPAPR_DRC_STATE_LOGICAL_UNUSABLE) > || (drc->state == SPAPR_DRC_STATE_PHYSICAL_POWERON)); > > > > > Am I missing something ? > > > > > > --- > > > > hw/ppc/spapr.c | 17 +++-------------- > > > > 1 file changed, 3 insertions(+), 14 deletions(-) > > > > > > > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > > > > index 1b173861152f..62f217a6b914 100644 > > > > --- a/hw/ppc/spapr.c > > > > +++ b/hw/ppc/spapr.c > > > > @@ -3443,19 +3443,13 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > > > > > > > > if (!is_nvdimm) { > > > > addr = object_property_get_uint(OBJECT(dimm), > > > > - PC_DIMM_ADDR_PROP, &local_err); > > > > - if (local_err) { > > > > - goto out_unplug; > > > > - } > > > > + PC_DIMM_ADDR_PROP, &error_abort); > > > > spapr_add_lmbs(dev, addr, size, > > > > spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT), > > > > &local_err); > > > > } else { > > > > slot = object_property_get_int(OBJECT(dimm), > > > > - PC_DIMM_SLOT_PROP, &local_err); > > > > - if (local_err) { > > > > - goto out_unplug; > > > > - } > > > > + PC_DIMM_SLOT_PROP, &error_abort); > > > > /* We should have valid slot number at this point */ > > > > g_assert(slot >= 0); > > > > spapr_add_nvdimm(dev, slot, &local_err); > > > > @@ -3634,7 +3628,6 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > > > DeviceState *dev, Error **errp) > > > > { > > > > SpaprMachineState *spapr = SPAPR_MACHINE(hotplug_dev); > > > > - Error *local_err = NULL; > > > > PCDIMMDevice *dimm = PC_DIMM(dev); > > > > uint32_t nr_lmbs; > > > > uint64_t size, addr_start, addr; > > > > @@ -3650,11 +3643,7 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, > > > > nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE; > > > > > > > > addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP, > > > > - &local_err); > > > > - if (local_err) { > > > > - error_propagate(errp, local_err); > > > > - return; > > > > - } > > > > + &error_abort); > > > > > > > > /* > > > > * An existing pending dimm state for this DIMM means that there is an > > > > > > > > > > > > > > > > > >
On Tue, 27 Oct 2020 16:18:58 +0100 Greg Kurz <groug@kaod.org> wrote: > On Tue, 27 Oct 2020 12:54:24 +0100 > Igor Mammedov <imammedo@redhat.com> wrote: > > > On Sun, 25 Oct 2020 16:24:44 +0100 > > Greg Kurz <groug@kaod.org> wrote: > > > > > On Fri, 23 Oct 2020 21:15:09 +0200 > > > Igor Mammedov <imammedo@redhat.com> wrote: > > > > > > > On Mon, 19 Oct 2020 10:48:41 +0200 > > > > Greg Kurz <groug@kaod.org> wrote: > > > > > > > > > Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the > > > > > default property list of the PC DIMM device class: > > > > > > > > > > DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), > > > > > > > > > > DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, > > > > > PC_DIMM_UNASSIGNED_SLOT), > > > > > > > > > > They should thus be always gettable for both PC DIMMs and NVDIMMs. > > > > > An error in getting them can only be the result of a programming > > > > > error. It doesn't make much sense to propagate the error in this > > > > > case. Abort instead. > > > > > > > > > > Signed-off-by: Greg Kurz <groug@kaod.org> > > > > > > > > Reviewed-by: Igor Mammedov <imammedo@redhat.com> > > > > > > > > TODO for future, > > > > get rid of local_err in spapr_memory_plug() altogether, it should not fail. > > > > it needs moving check from spapr_drc_attach() to spapr_memory_pre_plug() time. > > > > > > > > that will clear up (a bit) road for dropping errp in spapr_memory_plug() > > > > > > Igor, > > > > > > I could find time to look a bit into attaching DRCs at pre-plug and I > > > think this isn't possible. The problem is that there doesn't seem to be > > > a reverse operation for pre-plug. If realize fails for the DIMM device, > > > spapr_drc_detach() wouldn't be called, which would be wrong. > > > > probably I was clear enough, I didn't suggest to move spapr_drc_detach() > > to pre_plug time but rather do a bit of surgery along the lines: > > > > Ok, I get it now. I realize now I actually misread your suggestion. Sorry... > > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > > index 2db810f73a..59a229b4fa 100644 > > --- a/hw/ppc/spapr.c > > +++ b/hw/ppc/spapr.c > > @@ -3474,6 +3474,11 @@ static void spapr_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, > > return; > > } > > > > + get drc > > + if (!spapr_drc_attachable(drc)) { > > + error out > > + } > > + > > It might require some more code refactoring because the way regular > PC-DIMMs are broken down into a set of logical memory blocks (LMBs), > each one having its own DRC but it's certainly doable. Probably for > QEMU 6.0 though since we're entering soft freeze and David already > fired a PR today. as far as it's not forgotten, it can be done later. > > > if (is_nvdimm) { > > spapr_nvdimm_validate(hotplug_dev, NVDIMM(dev), size, &local_err); > > if (local_err) { > > diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c > > index fe998d8108..ae049bc202 100644 > > --- a/hw/ppc/spapr_drc.c > > +++ b/hw/ppc/spapr_drc.c > > @@ -371,14 +371,16 @@ static void prop_get_fdt(Object *obj, Visitor *v, const char *name, > > } while (fdt_depth != 0); > > } > > > > -void spapr_drc_attach(SpaprDrc *drc, DeviceState *d, Error **errp) > > + > > +bool spapr_drc_attachable(SpaprDrc *drc) > > +{ > > + return !drc->dev; > > +} > > + > > +void spapr_drc_attach(SpaprDrc *drc, DeviceState *d) > > { > > trace_spapr_drc_attach(spapr_drc_index(drc)); > > > > - if (drc->dev) { > > - error_setg(errp, "an attached device is still awaiting release"); > > - return; > > - } > > g_assert((drc->state == SPAPR_DRC_STATE_LOGICAL_UNUSABLE) > > || (drc->state == SPAPR_DRC_STATE_PHYSICAL_POWERON)); > > > > > > > > Am I missing something ? [...]
On Wed, 28 Oct 2020 16:22:16 +0100 Igor Mammedov <imammedo@redhat.com> wrote: > On Tue, 27 Oct 2020 16:18:58 +0100 > Greg Kurz <groug@kaod.org> wrote: > [...] > > > > It might require some more code refactoring because the way regular > > PC-DIMMs are broken down into a set of logical memory blocks (LMBs), > > each one having its own DRC but it's certainly doable. Probably for > > QEMU 6.0 though since we're entering soft freeze and David already > > fired a PR today. > > as far as it's not forgotten, it can be done later. > David, Can you create a ppc-for-6.0 branch ? Cheers, -- Greg
On Fri, Oct 30, 2020 at 02:25:42PM +0100, Greg Kurz wrote: > On Wed, 28 Oct 2020 16:22:16 +0100 > Igor Mammedov <imammedo@redhat.com> wrote: > > > On Tue, 27 Oct 2020 16:18:58 +0100 > > Greg Kurz <groug@kaod.org> wrote: > > > [...] > > > > > > It might require some more code refactoring because the way regular > > > PC-DIMMs are broken down into a set of logical memory blocks (LMBs), > > > each one having its own DRC but it's certainly doable. Probably for > > > QEMU 6.0 though since we're entering soft freeze and David already > > > fired a PR today. > > > > as far as it's not forgotten, it can be done later. > > > > David, > > Can you create a ppc-for-6.0 branch ? Done. > > Cheers, >
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index 1b173861152f..62f217a6b914 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -3443,19 +3443,13 @@ static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, if (!is_nvdimm) { addr = object_property_get_uint(OBJECT(dimm), - PC_DIMM_ADDR_PROP, &local_err); - if (local_err) { - goto out_unplug; - } + PC_DIMM_ADDR_PROP, &error_abort); spapr_add_lmbs(dev, addr, size, spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT), &local_err); } else { slot = object_property_get_int(OBJECT(dimm), - PC_DIMM_SLOT_PROP, &local_err); - if (local_err) { - goto out_unplug; - } + PC_DIMM_SLOT_PROP, &error_abort); /* We should have valid slot number at this point */ g_assert(slot >= 0); spapr_add_nvdimm(dev, slot, &local_err); @@ -3634,7 +3628,6 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { SpaprMachineState *spapr = SPAPR_MACHINE(hotplug_dev); - Error *local_err = NULL; PCDIMMDevice *dimm = PC_DIMM(dev); uint32_t nr_lmbs; uint64_t size, addr_start, addr; @@ -3650,11 +3643,7 @@ static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev, nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE; addr_start = object_property_get_uint(OBJECT(dimm), PC_DIMM_ADDR_PROP, - &local_err); - if (local_err) { - error_propagate(errp, local_err); - return; - } + &error_abort); /* * An existing pending dimm state for this DIMM means that there is an
Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the default property list of the PC DIMM device class: DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0), DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot, PC_DIMM_UNASSIGNED_SLOT), They should thus be always gettable for both PC DIMMs and NVDIMMs. An error in getting them can only be the result of a programming error. It doesn't make much sense to propagate the error in this case. Abort instead. Signed-off-by: Greg Kurz <groug@kaod.org> --- hw/ppc/spapr.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-)