diff mbox series

[v7,03/11] clk: imx: scu: add two cells binding support

Message ID 1596009618-25516-4-git-send-email-aisheng.dong@nxp.com (mailing list archive)
State Awaiting Upstream, archived
Headers show
Series clk: imx8: add new clock binding for better pm support | expand

Commit Message

Aisheng Dong July 29, 2020, 8 a.m. UTC 
This patch implements the new two cells binding for SCU clocks.
The usage is as follows:
clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>

Due to each SCU clock is associated with a power domain, without power
on the domain, the SCU clock can't work. So we create platform devices
for each domain clock respectively and manually attach the required domain
before register the clock devices, then we can register clocks in the
clock platform driver accordingly.

Note because we do not have power domain info in device tree and the SCU
resource ID is the same for power domain and clock, so we use resource ID
to find power domains.

Later, we will also use this clock platform driver to support suspend/resume
and runtime pm.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v6->v7:
 Addressed all comments from Stephen
 * remove error check of reading #clock-cells
 * add more code comments about the dependency of power domain
 * squash the former [V6,12/12] clk: imx: scu: unregister clocks if add provider failed
   into this patch.
v4->v6:
 * remove global clock_cells
 * put node after using of_find_compatible_node()
 * using ERR_PTR(ret) instead of ERR_PTR(-ENOMEM)
v4: no changes
v3: new patch
---
 drivers/clk/imx/clk-imx8qxp.c | 136 ++++++++++++++++-------------
 drivers/clk/imx/clk-scu.c     | 156 +++++++++++++++++++++++++++++++++-
 drivers/clk/imx/clk-scu.h     |  27 ++++--
 3 files changed, 252 insertions(+), 67 deletions(-)

Comments

Stephen Boyd Oct. 14, 2020, 12:40 a.m. UTC | #1 
Quoting Dong Aisheng (2020-07-29 01:00:10)
> This patch implements the new two cells binding for SCU clocks.
> The usage is as follows:
> clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>
> 
> Due to each SCU clock is associated with a power domain, without power
> on the domain, the SCU clock can't work. So we create platform devices
> for each domain clock respectively and manually attach the required domain
> before register the clock devices, then we can register clocks in the
> clock platform driver accordingly.
> 
> Note because we do not have power domain info in device tree and the SCU
> resource ID is the same for power domain and clock, so we use resource ID
> to find power domains.
> 
> Later, we will also use this clock platform driver to support suspend/resume
> and runtime pm.
> 
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Nathan Chancellor Oct. 30, 2020, 1:06 a.m. UTC | #2 
On Wed, Jul 29, 2020 at 04:00:10PM +0800, Dong Aisheng wrote:
> This patch implements the new two cells binding for SCU clocks.
> The usage is as follows:
> clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>
> 
> Due to each SCU clock is associated with a power domain, without power
> on the domain, the SCU clock can't work. So we create platform devices
> for each domain clock respectively and manually attach the required domain
> before register the clock devices, then we can register clocks in the
> clock platform driver accordingly.
> 
> Note because we do not have power domain info in device tree and the SCU
> resource ID is the same for power domain and clock, so we use resource ID
> to find power domains.
> 
> Later, we will also use this clock platform driver to support suspend/resume
> and runtime pm.
> 
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

This patch breaks allmodconfig.

$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- distclean allmodconfig drivers/clk/imx/
In file included from ./include/linux/device.h:32,
                 from ./include/linux/of_platform.h:9,
                 from drivers/clk/imx/clk-scu.c:11:
./include/linux/device/driver.h:290:1: warning: data definition has no type or storage class
  290 | device_initcall(__driver##_init);
      | ^~~~~~~~~~~~~~~
./include/linux/platform_device.h:258:2: note: in expansion of macro 'builtin_driver'
  258 |  builtin_driver(__platform_driver, platform_driver_register)
      |  ^~~~~~~~~~~~~~
drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro 'builtin_platform_driver'
  545 | builtin_platform_driver(imx_clk_scu_driver);
      | ^~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device/driver.h:290:1: error: type defaults to 'int' in declaration of 'device_initcall' [-Werror=implicit-int]
  290 | device_initcall(__driver##_init);
      | ^~~~~~~~~~~~~~~
./include/linux/platform_device.h:258:2: note: in expansion of macro 'builtin_driver'
  258 |  builtin_driver(__platform_driver, platform_driver_register)
      |  ^~~~~~~~~~~~~~
drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro 'builtin_platform_driver'
  545 | builtin_platform_driver(imx_clk_scu_driver);
      | ^~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/imx/clk-scu.c:545:1: warning: parameter names (without types) in function declaration
In file included from ./include/linux/device.h:32,
                 from ./include/linux/of_platform.h:9,
                 from drivers/clk/imx/clk-scu.c:11:
drivers/clk/imx/clk-scu.c:545:25: warning: 'imx_clk_scu_driver_init' defined but not used [-Wunused-function]
  545 | builtin_platform_driver(imx_clk_scu_driver);
      |                         ^~~~~~~~~~~~~~~~~~
./include/linux/device/driver.h:286:19: note: in definition of macro 'builtin_driver'
  286 | static int __init __driver##_init(void) \
      |                   ^~~~~~~~
drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro 'builtin_platform_driver'
  545 | builtin_platform_driver(imx_clk_scu_driver);
      | ^~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:283: drivers/clk/imx/clk-scu.o] Error 1
make[4]: Target '__build' not remade because of errors.
make[3]: *** [scripts/Makefile.build:500: drivers/clk/imx] Error 2
make[3]: Target '__build' not remade because of errors.
make[2]: *** [scripts/Makefile.build:500: drivers/clk] Error 2
make[2]: Target '__build' not remade because of errors.
make[1]: *** [Makefile:1799: drivers] Error 2
make[1]: Target 'drivers/clk/imx/' not remade because of errors.
make: *** [Makefile:335: __build_one_by_one] Error 2
make: Target 'distclean' not remade because of errors.
make: Target 'allmodconfig' not remade because of errors.
make: Target 'drivers/clk/imx/' not remade because of errors.

Cheers,
Nathan
Aisheng Dong Oct. 30, 2020, 3:22 a.m. UTC | #3 
> From: Nathan Chancellor <natechancellor@gmail.com>
> Sent: Friday, October 30, 2020 9:06 AM
> 
> On Wed, Jul 29, 2020 at 04:00:10PM +0800, Dong Aisheng wrote:
> > This patch implements the new two cells binding for SCU clocks.
> > The usage is as follows:
> > clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>
> >
> > Due to each SCU clock is associated with a power domain, without power
> > on the domain, the SCU clock can't work. So we create platform devices
> > for each domain clock respectively and manually attach the required
> > domain before register the clock devices, then we can register clocks
> > in the clock platform driver accordingly.
> >
> > Note because we do not have power domain info in device tree and the
> > SCU resource ID is the same for power domain and clock, so we use
> > resource ID to find power domains.
> >
> > Later, we will also use this clock platform driver to support
> > suspend/resume and runtime pm.
> >
> > Cc: Stephen Boyd <sboyd@kernel.org>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: Sascha Hauer <kernel@pengutronix.de>
> > Cc: Michael Turquette <mturquette@baylibre.com>
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> 
> This patch breaks allmodconfig.

Thanks for the info.
I'm checking it.

Regards
Aisheng

> 
> $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
> distclean allmodconfig drivers/clk/imx/ In file included
> from ./include/linux/device.h:32,
>                  from ./include/linux/of_platform.h:9,
>                  from drivers/clk/imx/clk-scu.c:11:
> ./include/linux/device/driver.h:290:1: warning: data definition has no type or
> storage class
>   290 | device_initcall(__driver##_init);
>       | ^~~~~~~~~~~~~~~
> ./include/linux/platform_device.h:258:2: note: in expansion of macro
> 'builtin_driver'
>   258 |  builtin_driver(__platform_driver, platform_driver_register)
>       |  ^~~~~~~~~~~~~~
> drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> 'builtin_platform_driver'
>   545 | builtin_platform_driver(imx_clk_scu_driver);
>       | ^~~~~~~~~~~~~~~~~~~~~~~
> ./include/linux/device/driver.h:290:1: error: type defaults to 'int' in declaration
> of 'device_initcall' [-Werror=implicit-int]
>   290 | device_initcall(__driver##_init);
>       | ^~~~~~~~~~~~~~~
> ./include/linux/platform_device.h:258:2: note: in expansion of macro
> 'builtin_driver'
>   258 |  builtin_driver(__platform_driver, platform_driver_register)
>       |  ^~~~~~~~~~~~~~
> drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> 'builtin_platform_driver'
>   545 | builtin_platform_driver(imx_clk_scu_driver);
>       | ^~~~~~~~~~~~~~~~~~~~~~~
> drivers/clk/imx/clk-scu.c:545:1: warning: parameter names (without types) in
> function declaration In file included from ./include/linux/device.h:32,
>                  from ./include/linux/of_platform.h:9,
>                  from drivers/clk/imx/clk-scu.c:11:
> drivers/clk/imx/clk-scu.c:545:25: warning: 'imx_clk_scu_driver_init' defined but
> not used [-Wunused-function]
>   545 | builtin_platform_driver(imx_clk_scu_driver);
>       |                         ^~~~~~~~~~~~~~~~~~
> ./include/linux/device/driver.h:286:19: note: in definition of macro
> 'builtin_driver'
>   286 | static int __init __driver##_init(void) \
>       |                   ^~~~~~~~
> drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> 'builtin_platform_driver'
>   545 | builtin_platform_driver(imx_clk_scu_driver);
>       | ^~~~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
> make[4]: *** [scripts/Makefile.build:283: drivers/clk/imx/clk-scu.o] Error 1
> make[4]: Target '__build' not remade because of errors.
> make[3]: *** [scripts/Makefile.build:500: drivers/clk/imx] Error 2
> make[3]: Target '__build' not remade because of errors.
> make[2]: *** [scripts/Makefile.build:500: drivers/clk] Error 2
> make[2]: Target '__build' not remade because of errors.
> make[1]: *** [Makefile:1799: drivers] Error 2
> make[1]: Target 'drivers/clk/imx/' not remade because of errors.
> make: *** [Makefile:335: __build_one_by_one] Error 2
> make: Target 'distclean' not remade because of errors.
> make: Target 'allmodconfig' not remade because of errors.
> make: Target 'drivers/clk/imx/' not remade because of errors.
> 
> Cheers,
> Nathan
Aisheng Dong Oct. 30, 2020, 3:58 p.m. UTC | #4 
> From: Aisheng Dong
> Sent: Friday, October 30, 2020 11:22 AM
> 
> > From: Nathan Chancellor <natechancellor@gmail.com>
> > Sent: Friday, October 30, 2020 9:06 AM
> >
> > On Wed, Jul 29, 2020 at 04:00:10PM +0800, Dong Aisheng wrote:
> > > This patch implements the new two cells binding for SCU clocks.
> > > The usage is as follows:
> > > clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>
> > >
> > > Due to each SCU clock is associated with a power domain, without
> > > power on the domain, the SCU clock can't work. So we create platform
> > > devices for each domain clock respectively and manually attach the
> > > required domain before register the clock devices, then we can
> > > register clocks in the clock platform driver accordingly.
> > >
> > > Note because we do not have power domain info in device tree and the
> > > SCU resource ID is the same for power domain and clock, so we use
> > > resource ID to find power domains.
> > >
> > > Later, we will also use this clock platform driver to support
> > > suspend/resume and runtime pm.
> > >
> > > Cc: Stephen Boyd <sboyd@kernel.org>
> > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > Cc: Sascha Hauer <kernel@pengutronix.de>
> > > Cc: Michael Turquette <mturquette@baylibre.com>
> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> >
> > This patch breaks allmodconfig.
> 
> Thanks for the info.
> I'm checking it.

See fix here.
https://patchwork.kernel.org/project/linux-clk/patch/20201030153733.30160-1-aisheng.dong@nxp.com/

Regards
Aisheng

> 
> Regards
> Aisheng
> 
> >
> > $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
> > distclean allmodconfig drivers/clk/imx/ In file included from
> > ./include/linux/device.h:32,
> >                  from ./include/linux/of_platform.h:9,
> >                  from drivers/clk/imx/clk-scu.c:11:
> > ./include/linux/device/driver.h:290:1: warning: data definition has no
> > type or storage class
> >   290 | device_initcall(__driver##_init);
> >       | ^~~~~~~~~~~~~~~
> > ./include/linux/platform_device.h:258:2: note: in expansion of macro
> > 'builtin_driver'
> >   258 |  builtin_driver(__platform_driver, platform_driver_register)
> >       |  ^~~~~~~~~~~~~~
> > drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> > 'builtin_platform_driver'
> >   545 | builtin_platform_driver(imx_clk_scu_driver);
> >       | ^~~~~~~~~~~~~~~~~~~~~~~
> > ./include/linux/device/driver.h:290:1: error: type defaults to 'int'
> > in declaration of 'device_initcall' [-Werror=implicit-int]
> >   290 | device_initcall(__driver##_init);
> >       | ^~~~~~~~~~~~~~~
> > ./include/linux/platform_device.h:258:2: note: in expansion of macro
> > 'builtin_driver'
> >   258 |  builtin_driver(__platform_driver, platform_driver_register)
> >       |  ^~~~~~~~~~~~~~
> > drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> > 'builtin_platform_driver'
> >   545 | builtin_platform_driver(imx_clk_scu_driver);
> >       | ^~~~~~~~~~~~~~~~~~~~~~~
> > drivers/clk/imx/clk-scu.c:545:1: warning: parameter names (without
> > types) in function declaration In file included from ./include/linux/device.h:32,
> >                  from ./include/linux/of_platform.h:9,
> >                  from drivers/clk/imx/clk-scu.c:11:
> > drivers/clk/imx/clk-scu.c:545:25: warning: 'imx_clk_scu_driver_init'
> > defined but not used [-Wunused-function]
> >   545 | builtin_platform_driver(imx_clk_scu_driver);
> >       |                         ^~~~~~~~~~~~~~~~~~
> > ./include/linux/device/driver.h:286:19: note: in definition of macro
> > 'builtin_driver'
> >   286 | static int __init __driver##_init(void) \
> >       |                   ^~~~~~~~
> > drivers/clk/imx/clk-scu.c:545:1: note: in expansion of macro
> > 'builtin_platform_driver'
> >   545 | builtin_platform_driver(imx_clk_scu_driver);
> >       | ^~~~~~~~~~~~~~~~~~~~~~~
> > cc1: some warnings being treated as errors
> > make[4]: *** [scripts/Makefile.build:283: drivers/clk/imx/clk-scu.o]
> > Error 1
> > make[4]: Target '__build' not remade because of errors.
> > make[3]: *** [scripts/Makefile.build:500: drivers/clk/imx] Error 2
> > make[3]: Target '__build' not remade because of errors.
> > make[2]: *** [scripts/Makefile.build:500: drivers/clk] Error 2
> > make[2]: Target '__build' not remade because of errors.
> > make[1]: *** [Makefile:1799: drivers] Error 2
> > make[1]: Target 'drivers/clk/imx/' not remade because of errors.
> > make: *** [Makefile:335: __build_one_by_one] Error 2
> > make: Target 'distclean' not remade because of errors.
> > make: Target 'allmodconfig' not remade because of errors.
> > make: Target 'drivers/clk/imx/' not remade because of errors.
> >
> > Cheers,
> > Nathan
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
index 5e2903efc488..5ed175de4771 100644
--- a/drivers/clk/imx/clk-imx8qxp.c
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -22,9 +22,10 @@  static int imx8qxp_clk_probe(struct platform_device *pdev)
 	struct device_node *ccm_node = pdev->dev.of_node;
 	struct clk_hw_onecell_data *clk_data;
 	struct clk_hw **clks;
+	u32 clk_cells;
 	int ret, i;
 
-	ret = imx_clk_scu_init();
+	ret = imx_clk_scu_init(ccm_node);
 	if (ret)
 		return ret;
 
@@ -33,6 +34,9 @@  static int imx8qxp_clk_probe(struct platform_device *pdev)
 	if (!clk_data)
 		return -ENOMEM;
 
+	if (of_property_read_u32(ccm_node, "#clock-cells", &clk_cells))
+		return -EINVAL;
+
 	clk_data->num = IMX_SCU_CLK_END;
 	clks = clk_data->hws;
 
@@ -55,78 +59,78 @@  static int imx8qxp_clk_probe(struct platform_device *pdev)
 	clks[IMX_LSIO_BUS_CLK]		= clk_hw_register_fixed_rate(NULL, "lsio_bus_clk_root", NULL, 0, 100000000);
 
 	/* ARM core */
-	clks[IMX_A35_CLK]		= imx_clk_scu("a35_clk", IMX_SC_R_A35, IMX_SC_PM_CLK_CPU);
+	clks[IMX_A35_CLK]		= imx_clk_scu("a35_clk", IMX_SC_R_A35, IMX_SC_PM_CLK_CPU, clk_cells);
 
 	/* LSIO SS */
-	clks[IMX_LSIO_PWM0_CLK]		= imx_clk_scu("pwm0_clk", IMX_SC_R_PWM_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM1_CLK]		= imx_clk_scu("pwm1_clk", IMX_SC_R_PWM_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM2_CLK]		= imx_clk_scu("pwm2_clk", IMX_SC_R_PWM_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM3_CLK]		= imx_clk_scu("pwm3_clk", IMX_SC_R_PWM_3, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM4_CLK]		= imx_clk_scu("pwm4_clk", IMX_SC_R_PWM_4, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM5_CLK]		= imx_clk_scu("pwm5_clk", IMX_SC_R_PWM_5, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM6_CLK]		= imx_clk_scu("pwm6_clk", IMX_SC_R_PWM_6, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_PWM7_CLK]		= imx_clk_scu("pwm7_clk", IMX_SC_R_PWM_7, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_GPT0_CLK]		= imx_clk_scu("gpt0_clk", IMX_SC_R_GPT_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_GPT1_CLK]		= imx_clk_scu("gpt1_clk", IMX_SC_R_GPT_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_GPT2_CLK]		= imx_clk_scu("gpt2_clk", IMX_SC_R_GPT_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_GPT3_CLK]		= imx_clk_scu("gpt3_clk", IMX_SC_R_GPT_3, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_GPT4_CLK]		= imx_clk_scu("gpt4_clk", IMX_SC_R_GPT_4, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_FSPI0_CLK]	= imx_clk_scu("fspi0_clk", IMX_SC_R_FSPI_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_LSIO_FSPI1_CLK]	= imx_clk_scu("fspi1_clk", IMX_SC_R_FSPI_1, IMX_SC_PM_CLK_PER);
+	clks[IMX_LSIO_PWM0_CLK]		= imx_clk_scu("pwm0_clk", IMX_SC_R_PWM_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM1_CLK]		= imx_clk_scu("pwm1_clk", IMX_SC_R_PWM_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM2_CLK]		= imx_clk_scu("pwm2_clk", IMX_SC_R_PWM_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM3_CLK]		= imx_clk_scu("pwm3_clk", IMX_SC_R_PWM_3, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM4_CLK]		= imx_clk_scu("pwm4_clk", IMX_SC_R_PWM_4, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM5_CLK]		= imx_clk_scu("pwm5_clk", IMX_SC_R_PWM_5, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM6_CLK]		= imx_clk_scu("pwm6_clk", IMX_SC_R_PWM_6, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_PWM7_CLK]		= imx_clk_scu("pwm7_clk", IMX_SC_R_PWM_7, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_GPT0_CLK]		= imx_clk_scu("gpt0_clk", IMX_SC_R_GPT_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_GPT1_CLK]		= imx_clk_scu("gpt1_clk", IMX_SC_R_GPT_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_GPT2_CLK]		= imx_clk_scu("gpt2_clk", IMX_SC_R_GPT_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_GPT3_CLK]		= imx_clk_scu("gpt3_clk", IMX_SC_R_GPT_3, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_GPT4_CLK]		= imx_clk_scu("gpt4_clk", IMX_SC_R_GPT_4, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_FSPI0_CLK]	= imx_clk_scu("fspi0_clk", IMX_SC_R_FSPI_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_LSIO_FSPI1_CLK]	= imx_clk_scu("fspi1_clk", IMX_SC_R_FSPI_1, IMX_SC_PM_CLK_PER, clk_cells);
 
 	/* ADMA SS */
-	clks[IMX_ADMA_UART0_CLK]	= imx_clk_scu("uart0_clk", IMX_SC_R_UART_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_UART1_CLK]	= imx_clk_scu("uart1_clk", IMX_SC_R_UART_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_UART2_CLK]	= imx_clk_scu("uart2_clk", IMX_SC_R_UART_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_UART3_CLK]	= imx_clk_scu("uart3_clk", IMX_SC_R_UART_3, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_SPI0_CLK]		= imx_clk_scu("spi0_clk",  IMX_SC_R_SPI_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_SPI1_CLK]		= imx_clk_scu("spi1_clk",  IMX_SC_R_SPI_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_SPI2_CLK]		= imx_clk_scu("spi2_clk",  IMX_SC_R_SPI_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_SPI3_CLK]		= imx_clk_scu("spi3_clk",  IMX_SC_R_SPI_3, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_CAN0_CLK]		= imx_clk_scu("can0_clk",  IMX_SC_R_CAN_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_I2C0_CLK]		= imx_clk_scu("i2c0_clk",  IMX_SC_R_I2C_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_I2C1_CLK]		= imx_clk_scu("i2c1_clk",  IMX_SC_R_I2C_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_I2C2_CLK]		= imx_clk_scu("i2c2_clk",  IMX_SC_R_I2C_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_I2C3_CLK]		= imx_clk_scu("i2c3_clk",  IMX_SC_R_I2C_3, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_FTM0_CLK]		= imx_clk_scu("ftm0_clk",  IMX_SC_R_FTM_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_FTM1_CLK]		= imx_clk_scu("ftm1_clk",  IMX_SC_R_FTM_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_ADC0_CLK]		= imx_clk_scu("adc0_clk",  IMX_SC_R_ADC_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_PWM_CLK]		= imx_clk_scu("pwm_clk",   IMX_SC_R_LCD_0_PWM_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_ADMA_LCD_CLK]		= imx_clk_scu("lcd_clk",   IMX_SC_R_LCD_0, IMX_SC_PM_CLK_PER);
+	clks[IMX_ADMA_UART0_CLK]	= imx_clk_scu("uart0_clk", IMX_SC_R_UART_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_UART1_CLK]	= imx_clk_scu("uart1_clk", IMX_SC_R_UART_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_UART2_CLK]	= imx_clk_scu("uart2_clk", IMX_SC_R_UART_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_UART3_CLK]	= imx_clk_scu("uart3_clk", IMX_SC_R_UART_3, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_SPI0_CLK]		= imx_clk_scu("spi0_clk",  IMX_SC_R_SPI_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_SPI1_CLK]		= imx_clk_scu("spi1_clk",  IMX_SC_R_SPI_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_SPI2_CLK]		= imx_clk_scu("spi2_clk",  IMX_SC_R_SPI_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_SPI3_CLK]		= imx_clk_scu("spi3_clk",  IMX_SC_R_SPI_3, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_CAN0_CLK]		= imx_clk_scu("can0_clk",  IMX_SC_R_CAN_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_I2C0_CLK]		= imx_clk_scu("i2c0_clk",  IMX_SC_R_I2C_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_I2C1_CLK]		= imx_clk_scu("i2c1_clk",  IMX_SC_R_I2C_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_I2C2_CLK]		= imx_clk_scu("i2c2_clk",  IMX_SC_R_I2C_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_I2C3_CLK]		= imx_clk_scu("i2c3_clk",  IMX_SC_R_I2C_3, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_FTM0_CLK]		= imx_clk_scu("ftm0_clk",  IMX_SC_R_FTM_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_FTM1_CLK]		= imx_clk_scu("ftm1_clk",  IMX_SC_R_FTM_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_ADC0_CLK]		= imx_clk_scu("adc0_clk",  IMX_SC_R_ADC_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_PWM_CLK]		= imx_clk_scu("pwm_clk",   IMX_SC_R_LCD_0_PWM_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_ADMA_LCD_CLK]		= imx_clk_scu("lcd_clk",   IMX_SC_R_LCD_0, IMX_SC_PM_CLK_PER, clk_cells);
 
 	/* Connectivity */
-	clks[IMX_CONN_SDHC0_CLK]	= imx_clk_scu("sdhc0_clk", IMX_SC_R_SDHC_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_SDHC1_CLK]	= imx_clk_scu("sdhc1_clk", IMX_SC_R_SDHC_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_SDHC2_CLK]	= imx_clk_scu("sdhc2_clk", IMX_SC_R_SDHC_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_ENET0_ROOT_CLK]	= imx_clk_scu("enet0_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_ENET0_BYPASS_CLK]	= imx_clk_scu("enet0_bypass_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_BYPASS);
-	clks[IMX_CONN_ENET0_RGMII_CLK]	= imx_clk_scu("enet0_rgmii_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_MISC0);
-	clks[IMX_CONN_ENET1_ROOT_CLK]	= imx_clk_scu("enet1_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_ENET1_BYPASS_CLK]	= imx_clk_scu("enet1_bypass_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_BYPASS);
-	clks[IMX_CONN_ENET1_RGMII_CLK]	= imx_clk_scu("enet1_rgmii_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_MISC0);
-	clks[IMX_CONN_GPMI_BCH_IO_CLK]	= imx_clk_scu("gpmi_io_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_MST_BUS);
-	clks[IMX_CONN_GPMI_BCH_CLK]	= imx_clk_scu("gpmi_bch_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_USB2_ACLK]	= imx_clk_scu("usb3_aclk_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_PER);
-	clks[IMX_CONN_USB2_BUS_CLK]	= imx_clk_scu("usb3_bus_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MST_BUS);
-	clks[IMX_CONN_USB2_LPM_CLK]	= imx_clk_scu("usb3_lpm_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MISC);
+	clks[IMX_CONN_SDHC0_CLK]	= imx_clk_scu("sdhc0_clk", IMX_SC_R_SDHC_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_SDHC1_CLK]	= imx_clk_scu("sdhc1_clk", IMX_SC_R_SDHC_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_SDHC2_CLK]	= imx_clk_scu("sdhc2_clk", IMX_SC_R_SDHC_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_ENET0_ROOT_CLK]	= imx_clk_scu("enet0_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_ENET0_BYPASS_CLK]	= imx_clk_scu("enet0_bypass_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_BYPASS, clk_cells);
+	clks[IMX_CONN_ENET0_RGMII_CLK]	= imx_clk_scu("enet0_rgmii_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_MISC0, clk_cells);
+	clks[IMX_CONN_ENET1_ROOT_CLK]	= imx_clk_scu("enet1_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_ENET1_BYPASS_CLK]	= imx_clk_scu("enet1_bypass_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_BYPASS, clk_cells);
+	clks[IMX_CONN_ENET1_RGMII_CLK]	= imx_clk_scu("enet1_rgmii_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_MISC0, clk_cells);
+	clks[IMX_CONN_GPMI_BCH_IO_CLK]	= imx_clk_scu("gpmi_io_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_MST_BUS, clk_cells);
+	clks[IMX_CONN_GPMI_BCH_CLK]	= imx_clk_scu("gpmi_bch_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_USB2_ACLK]	= imx_clk_scu("usb3_aclk_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CONN_USB2_BUS_CLK]	= imx_clk_scu("usb3_bus_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MST_BUS, clk_cells);
+	clks[IMX_CONN_USB2_LPM_CLK]	= imx_clk_scu("usb3_lpm_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MISC, clk_cells);
 
 	/* Display controller SS */
-	clks[IMX_DC0_DISP0_CLK]		= imx_clk_scu("dc0_disp0_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC0);
-	clks[IMX_DC0_DISP1_CLK]		= imx_clk_scu("dc0_disp1_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC1);
+	clks[IMX_DC0_DISP0_CLK]		= imx_clk_scu("dc0_disp0_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC0, clk_cells);
+	clks[IMX_DC0_DISP1_CLK]		= imx_clk_scu("dc0_disp1_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC1, clk_cells);
 
 	/* MIPI-LVDS SS */
-	clks[IMX_MIPI0_I2C0_CLK]	= imx_clk_scu("mipi0_i2c0_clk", IMX_SC_R_MIPI_0_I2C_0, IMX_SC_PM_CLK_MISC2);
-	clks[IMX_MIPI0_I2C1_CLK]	= imx_clk_scu("mipi0_i2c1_clk", IMX_SC_R_MIPI_0_I2C_1, IMX_SC_PM_CLK_MISC2);
+	clks[IMX_MIPI0_I2C0_CLK]	= imx_clk_scu("mipi0_i2c0_clk", IMX_SC_R_MIPI_0_I2C_0, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI0_I2C1_CLK]	= imx_clk_scu("mipi0_i2c1_clk", IMX_SC_R_MIPI_0_I2C_1, IMX_SC_PM_CLK_MISC2, clk_cells);
 
 	/* MIPI CSI SS */
-	clks[IMX_CSI0_CORE_CLK]		= imx_clk_scu("mipi_csi0_core_clk", IMX_SC_R_CSI_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_CSI0_ESC_CLK]		= imx_clk_scu("mipi_csi0_esc_clk",  IMX_SC_R_CSI_0, IMX_SC_PM_CLK_MISC);
-	clks[IMX_CSI0_I2C0_CLK]		= imx_clk_scu("mipi_csi0_i2c0_clk", IMX_SC_R_CSI_0_I2C_0, IMX_SC_PM_CLK_PER);
-	clks[IMX_CSI0_PWM0_CLK]		= imx_clk_scu("mipi_csi0_pwm0_clk", IMX_SC_R_CSI_0_PWM_0, IMX_SC_PM_CLK_PER);
+	clks[IMX_CSI0_CORE_CLK]		= imx_clk_scu("mipi_csi0_core_clk", IMX_SC_R_CSI_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CSI0_ESC_CLK]		= imx_clk_scu("mipi_csi0_esc_clk",  IMX_SC_R_CSI_0, IMX_SC_PM_CLK_MISC, clk_cells);
+	clks[IMX_CSI0_I2C0_CLK]		= imx_clk_scu("mipi_csi0_i2c0_clk", IMX_SC_R_CSI_0_I2C_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_CSI0_PWM0_CLK]		= imx_clk_scu("mipi_csi0_pwm0_clk", IMX_SC_R_CSI_0_PWM_0, IMX_SC_PM_CLK_PER, clk_cells);
 
 	/* GPU SS */
-	clks[IMX_GPU0_CORE_CLK]		= imx_clk_scu("gpu_core0_clk",	 IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_PER);
-	clks[IMX_GPU0_SHADER_CLK]	= imx_clk_scu("gpu_shader0_clk", IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_MISC);
+	clks[IMX_GPU0_CORE_CLK]		= imx_clk_scu("gpu_core0_clk",	 IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_GPU0_SHADER_CLK]	= imx_clk_scu("gpu_shader0_clk", IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_MISC, clk_cells);
 
 	for (i = 0; i < clk_data->num; i++) {
 		if (IS_ERR(clks[i]))
@@ -134,7 +138,19 @@  static int imx8qxp_clk_probe(struct platform_device *pdev)
 				i, PTR_ERR(clks[i]));
 	}
 
-	return of_clk_add_hw_provider(ccm_node, of_clk_hw_onecell_get, clk_data);
+	if (clk_cells == 2) {
+		ret = of_clk_add_hw_provider(ccm_node, imx_scu_of_clk_src_get, imx_scu_clks);
+		if (ret)
+			imx_clk_scu_unregister();
+	} else {
+		/*
+		 * legacy binding code path doesn't unregister here because
+		 * it will be removed later.
+		 */
+		ret = of_clk_add_hw_provider(ccm_node, of_clk_hw_onecell_get, clk_data);
+	}
+
+	return ret;
 }
 
 static const struct of_device_id imx8qxp_match[] = {
diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index b8b2072742a5..e5837e7caa50 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -8,6 +8,9 @@ 
 #include <linux/arm-smccc.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/slab.h>
 
 #include "clk-scu.h"
@@ -16,6 +19,20 @@ 
 #define IMX_SIP_SET_CPUFREQ		0x00
 
 static struct imx_sc_ipc *ccm_ipc_handle;
+struct device_node *pd_np;
+
+struct imx_scu_clk_node {
+	const char *name;
+	u32 rsrc;
+	u8 clk_type;
+	const char * const *parents;
+	int num_parents;
+
+	struct clk_hw *hw;
+	struct list_head node;
+};
+
+struct list_head imx_scu_clks[IMX_SC_R_LAST];
 
 /*
  * struct clk_scu - Description of one SCU clock
@@ -128,9 +145,35 @@  static inline struct clk_scu *to_clk_scu(struct clk_hw *hw)
 	return container_of(hw, struct clk_scu, hw);
 }
 
-int imx_clk_scu_init(void)
+int imx_clk_scu_init(struct device_node *np)
 {
-	return imx_scu_get_handle(&ccm_ipc_handle);
+	struct platform_device *pd_dev;
+	u32 clk_cells;
+	int ret, i;
+
+	ret = imx_scu_get_handle(&ccm_ipc_handle);
+	if (ret)
+		return ret;
+
+	of_property_read_u32(np, "#clock-cells", &clk_cells);
+
+	if (clk_cells == 2) {
+		for (i = 0; i < IMX_SC_R_LAST; i++)
+			INIT_LIST_HEAD(&imx_scu_clks[i]);
+		/*
+		 * Note: SCU clock driver depends on SCU power domain to be ready
+		 * first. As there're no power domains under scu clock node in dts,
+		 * we can't use PROBE_DEFER automatically.
+		 */
+		pd_np = of_find_compatible_node(NULL, NULL, "fsl,scu-pd");
+		pd_dev = of_find_device_by_node(pd_np);
+		if (!pd_dev || !device_is_bound(&pd_dev->dev)) {
+			of_node_put(pd_np);
+			return -EPROBE_DEFER;
+		}
+	}
+
+	return 0;
 }
 
 /*
@@ -387,3 +430,112 @@  struct clk_hw *__imx_clk_scu(const char *name, const char * const *parents,
 
 	return hw;
 }
+
+struct clk_hw *imx_scu_of_clk_src_get(struct of_phandle_args *clkspec,
+				      void *data)
+{
+	unsigned int rsrc = clkspec->args[0];
+	unsigned int idx = clkspec->args[1];
+	struct list_head *scu_clks = data;
+	struct imx_scu_clk_node *clk;
+
+	list_for_each_entry(clk, &scu_clks[rsrc], node) {
+		if (clk->clk_type == idx)
+			return clk->hw;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static int imx_clk_scu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_scu_clk_node *clk = dev_get_platdata(dev);
+	struct clk_hw *hw;
+
+	hw = __imx_clk_scu(clk->name, clk->parents, clk->num_parents,
+			   clk->rsrc, clk->clk_type);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	clk->hw = hw;
+	list_add_tail(&clk->node, &imx_scu_clks[clk->rsrc]);
+
+	dev_dbg(dev, "register SCU clock rsrc:%d type:%d\n", clk->rsrc,
+		clk->clk_type);
+
+	return 0;
+}
+
+static struct platform_driver imx_clk_scu_driver = {
+	.driver = {
+		.name = "imx-scu-clk",
+		.suppress_bind_attrs = true,
+	},
+	.probe = imx_clk_scu_probe,
+};
+builtin_platform_driver(imx_clk_scu_driver);
+
+static int imx_clk_scu_attach_pd(struct device *dev, u32 rsrc_id)
+{
+	struct of_phandle_args genpdspec = {
+		.np = pd_np,
+		.args_count = 1,
+		.args[0] = rsrc_id,
+	};
+
+	return of_genpd_add_device(&genpdspec, dev);
+}
+
+struct clk_hw *imx_clk_scu_alloc_dev(const char *name,
+				     const char * const *parents,
+				     int num_parents, u32 rsrc_id, u8 clk_type)
+{
+	struct imx_scu_clk_node clk = {
+		.name = name,
+		.rsrc = rsrc_id,
+		.clk_type = clk_type,
+		.parents = parents,
+		.num_parents = num_parents,
+	};
+	struct platform_device *pdev;
+	int ret;
+
+	pdev = platform_device_alloc(name, PLATFORM_DEVID_NONE);
+	if (!pdev) {
+		pr_err("%s: failed to allocate scu clk dev rsrc %d type %d\n",
+		       name, rsrc_id, clk_type);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ret = platform_device_add_data(pdev, &clk, sizeof(clk));
+	if (ret) {
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
+
+	pdev->driver_override = "imx-scu-clk";
+
+	ret = imx_clk_scu_attach_pd(&pdev->dev, rsrc_id);
+	if (ret)
+		pr_warn("%s: failed to attached the power domain %d\n",
+			name, ret);
+
+	platform_device_add(pdev);
+
+	/* For API backwards compatiblilty, simply return NULL for success */
+	return NULL;
+}
+
+void imx_clk_scu_unregister(void)
+{
+	struct imx_scu_clk_node *clk;
+	int i;
+
+	for (i = 0; i < IMX_SC_R_LAST; i++) {
+		list_for_each_entry(clk, &imx_scu_clks[i], node) {
+			clk_hw_unregister(clk->hw);
+			kfree(clk);
+		}
+	}
+}
diff --git a/drivers/clk/imx/clk-scu.h b/drivers/clk/imx/clk-scu.h
index 2bcfaf06a458..f7480898ea74 100644
--- a/drivers/clk/imx/clk-scu.h
+++ b/drivers/clk/imx/clk-scu.h
@@ -8,22 +8,39 @@ 
 #define __IMX_CLK_SCU_H
 
 #include <linux/firmware/imx/sci.h>
+#include <linux/of.h>
 
-int imx_clk_scu_init(void);
+extern struct list_head imx_scu_clks[];
+
+int imx_clk_scu_init(struct device_node *np);
+struct clk_hw *imx_scu_of_clk_src_get(struct of_phandle_args *clkspec,
+				      void *data);
+struct clk_hw *imx_clk_scu_alloc_dev(const char *name,
+				     const char * const *parents,
+				     int num_parents, u32 rsrc_id, u8 clk_type);
 
 struct clk_hw *__imx_clk_scu(const char *name, const char * const *parents,
 			     int num_parents, u32 rsrc_id, u8 clk_type);
 
+void imx_clk_scu_unregister(void);
+
 static inline struct clk_hw *imx_clk_scu(const char *name, u32 rsrc_id,
-					 u8 clk_type)
+					 u8 clk_type, u8 clk_cells)
 {
-	return __imx_clk_scu(name, NULL, 0, rsrc_id, clk_type);
+	if (clk_cells == 2)
+		return imx_clk_scu_alloc_dev(name, NULL, 0, rsrc_id, clk_type);
+	else
+		return __imx_clk_scu(name, NULL, 0, rsrc_id, clk_type);
 }
 
 static inline struct clk_hw *imx_clk_scu2(const char *name, const char * const *parents,
-					  int num_parents, u32 rsrc_id, u8 clk_type)
+					  int num_parents, u32 rsrc_id, u8 clk_type,
+					  u8 clk_cells)
 {
-	return __imx_clk_scu(name, parents, num_parents, rsrc_id, clk_type);
+	if (clk_cells == 2)
+		return imx_clk_scu_alloc_dev(name, parents, num_parents, rsrc_id, clk_type);
+	else
+		return __imx_clk_scu(name, parents, num_parents, rsrc_id, clk_type);
 }
 
 struct clk_hw *imx_clk_lpcg_scu(const char *name, const char *parent_name,