diff mbox series

[v2,2/2] arm64: dts: imx8mq-evk: Add spdif sound card support

Message ID 1604283077-27012-2-git-send-email-shengjiu.wang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] arm64: dts: imx8mq: Configure clock rate for audio plls | expand

Commit Message

Shengjiu Wang Nov. 2, 2020, 2:11 a.m. UTC 
There are two spdif IP on imx8mq, spdif1 is for normal
spdif device, spdif2 is for HDMI ARC interface.

Enable these spdif sound card in this patch.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
changes in v2:
- remove undocument compatible string.

 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 38 ++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi    | 48 ++++++++++++++++++++
 2 files changed, 86 insertions(+)

Comments

Krzysztof Kozlowski Nov. 2, 2020, 8:24 a.m. UTC | #1 
On Mon, Nov 02, 2020 at 10:11:17AM +0800, Shengjiu Wang wrote:
> There are two spdif IP on imx8mq, spdif1 is for normal
> spdif device, spdif2 is for HDMI ARC interface.
> 
> Enable these spdif sound card in this patch.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
> changes in v2:
> - remove undocument compatible string.
> 
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 38 ++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi    | 48 ++++++++++++++++++++
>  2 files changed, 86 insertions(+)
> 

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 2418cca00bc5..e4250812586b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -87,6 +87,21 @@  link_codec: simple-audio-card,codec {
 			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 		};
 	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+
+	sound-hdmi-arc {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-hdmi-arc";
+		spdif-controller = <&spdif2>;
+		spdif-in;
+	};
 };
 
 &A53_0 {
@@ -336,6 +351,22 @@  &snvs_pwrkey {
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&spdif2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -467,6 +498,13 @@  MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 49cc79246288..a841a023e8e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -793,6 +793,30 @@  bus@30800000 { /* AIPS3 */
 			ranges = <0x30800000 0x30800000 0x400000>,
 				 <0x08000000 0x08000000 0x10000000>;
 
+			spdif1: spdif@30810000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30810000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			ecspi1: spi@30820000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -862,6 +886,30 @@  uart2: serial@30890000 {
 				status = "disabled";
 			};
 
+			spdif2: spdif@308a0000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			sai2: sai@308b0000 {
 				#sound-dai-cells = <0>;
 				compatible = "fsl,imx8mq-sai";