| Message ID | 20201031182922.743153-5-jic23@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings:iio: Move to trivial-devices.yaml from txt files. | expand |
On paź 31, 2020 18:29, Jonathan Cameron wrote: > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Simple SPI binding that doesn't need a separate file. > During conversion I looked up the individual part number descriptions > in the datasheet so that we could give slightly more detail in > trivial-device.yaml. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Cc: Maury Anderson <maury.anderson@rockwellcollins.com> > Cc: Matthew Weber <matthew.weber@rockwellcollins.com> > Cc: Slawomir Stepien <sst@poczta.fm> Reviewed-by: Slawomir Stepien <sst@poczta.fm> > --- > .../bindings/iio/potentiometer/max5481.txt | 23 ------------------- > .../devicetree/bindings/trivial-devices.yaml | 8 +++++++ > 2 files changed, 8 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt > deleted file mode 100644 > index 6a91b106e076..000000000000 > --- a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt > +++ /dev/null > @@ -1,23 +0,0 @@ > -* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484 > - > -The node for this driver must be a child node of a SPI controller, hence > -all mandatory properties described in > - > - Documentation/devicetree/bindings/spi/spi-bus.txt > - > -must be specified. > - > -Required properties: > - - compatible: Must be one of the following, depending on the > - model: > - "maxim,max5481" > - "maxim,max5482" > - "maxim,max5483" > - "maxim,max5484" > - > -Example: > -max548x: max548x@0 { > - compatible = "maxim,max5482"; > - spi-max-frequency = <7000000>; > - reg = <0>; /* chip-select */ > -}; > diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml > index 695b1e379238..3182d5b5a0b4 100644 > --- a/Documentation/devicetree/bindings/trivial-devices.yaml > +++ b/Documentation/devicetree/bindings/trivial-devices.yaml > @@ -118,6 +118,14 @@ properties: > - maxim,ds1803-100 > # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs > - maxim,max1237 > + # 10-bit 10 kOhm linear programable voltage divider > + - maxim,max5481 > + # 10-bit 50 kOhm linear programable voltage divider > + - maxim,max5482 > + # 10-bit 10 kOhm linear programable variable resistor > + - maxim,max5483 > + # 10-bit 50 kOhm linear programable variable resistor > + - maxim,max5484 > # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion > - maxim,max6621 > # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt deleted file mode 100644 index 6a91b106e076..000000000000 --- a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484 - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in - - Documentation/devicetree/bindings/spi/spi-bus.txt - -must be specified. - -Required properties: - - compatible: Must be one of the following, depending on the - model: - "maxim,max5481" - "maxim,max5482" - "maxim,max5483" - "maxim,max5484" - -Example: -max548x: max548x@0 { - compatible = "maxim,max5482"; - spi-max-frequency = <7000000>; - reg = <0>; /* chip-select */ -}; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 695b1e379238..3182d5b5a0b4 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -118,6 +118,14 @@ properties: - maxim,ds1803-100 # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs - maxim,max1237 + # 10-bit 10 kOhm linear programable voltage divider + - maxim,max5481 + # 10-bit 50 kOhm linear programable voltage divider + - maxim,max5482 + # 10-bit 10 kOhm linear programable variable resistor + - maxim,max5483 + # 10-bit 50 kOhm linear programable variable resistor + - maxim,max5484 # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion - maxim,max6621 # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface