diff mbox series

[v7,2/7] irqchip/gic-v3: Enable support for SGIs to act as NMIs

Message ID 1604317487-14543-3-git-send-email-sumit.garg@linaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: Add framework to turn an IPI as NMI | expand

Commit Message

Sumit Garg Nov. 2, 2020, 11:44 a.m. UTC
Add support to handle SGIs as pseudo NMIs. As SGIs or IPIs default to a
special flow handler: handle_percpu_devid_fasteoi_ipi(), so skip NMI
handler update in case of SGIs.

Also, enable NMI support prior to gic_smp_init() as allocation of SGIs
as IRQs/NMIs happen as part of this routine.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 drivers/irqchip/irq-gic-v3.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

Comments

Masayoshi Mizuma Nov. 2, 2020, 4:17 p.m. UTC | #1
On Mon, Nov 02, 2020 at 05:14:42PM +0530, Sumit Garg wrote:
> Add support to handle SGIs as pseudo NMIs. As SGIs or IPIs default to a
> special flow handler: handle_percpu_devid_fasteoi_ipi(), so skip NMI
> handler update in case of SGIs.
> 
> Also, enable NMI support prior to gic_smp_init() as allocation of SGIs
> as IRQs/NMIs happen as part of this routine.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> ---
>  drivers/irqchip/irq-gic-v3.c | 29 +++++++++++++++++++++--------
>  1 file changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 16fecc0..7010ae2 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -461,6 +461,7 @@ static u32 gic_get_ppi_index(struct irq_data *d)
>  static int gic_irq_nmi_setup(struct irq_data *d)
>  {
>  	struct irq_desc *desc = irq_to_desc(d->irq);
> +	u32 idx;
>  
>  	if (!gic_supports_nmi())
>  		return -EINVAL;
> @@ -478,16 +479,22 @@ static int gic_irq_nmi_setup(struct irq_data *d)
>  		return -EINVAL;
>  
>  	/* desc lock should already be held */
> -	if (gic_irq_in_rdist(d)) {
> -		u32 idx = gic_get_ppi_index(d);
> +	switch (get_intid_range(d)) {
> +	case SGI_RANGE:
> +		break;
> +	case PPI_RANGE:
> +	case EPPI_RANGE:
> +		idx = gic_get_ppi_index(d);
>  
>  		/* Setting up PPI as NMI, only switch handler for first NMI */
>  		if (!refcount_inc_not_zero(&ppi_nmi_refs[idx])) {
>  			refcount_set(&ppi_nmi_refs[idx], 1);
>  			desc->handle_irq = handle_percpu_devid_fasteoi_nmi;
>  		}
> -	} else {
> +		break;
> +	default:
>  		desc->handle_irq = handle_fasteoi_nmi;
> +		break;
>  	}
>  
>  	gic_irq_set_prio(d, GICD_INT_NMI_PRI);
> @@ -498,6 +505,7 @@ static int gic_irq_nmi_setup(struct irq_data *d)
>  static void gic_irq_nmi_teardown(struct irq_data *d)
>  {
>  	struct irq_desc *desc = irq_to_desc(d->irq);
> +	u32 idx;
>  
>  	if (WARN_ON(!gic_supports_nmi()))
>  		return;
> @@ -515,14 +523,20 @@ static void gic_irq_nmi_teardown(struct irq_data *d)
>  		return;
>  
>  	/* desc lock should already be held */
> -	if (gic_irq_in_rdist(d)) {
> -		u32 idx = gic_get_ppi_index(d);
> +	switch (get_intid_range(d)) {
> +	case SGI_RANGE:
> +		break;
> +	case PPI_RANGE:
> +	case EPPI_RANGE:
> +		idx = gic_get_ppi_index(d);
>  
>  		/* Tearing down NMI, only switch handler for last NMI */
>  		if (refcount_dec_and_test(&ppi_nmi_refs[idx]))
>  			desc->handle_irq = handle_percpu_devid_irq;
> -	} else {
> +		break;
> +	default:
>  		desc->handle_irq = handle_fasteoi_irq;
> +		break;
>  	}
>  
>  	gic_irq_set_prio(d, GICD_INT_DEF_PRI);
> @@ -1708,6 +1722,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
>  
>  	gic_dist_init();
>  	gic_cpu_init();
> +	gic_enable_nmi_support();
>  	gic_smp_init();
>  	gic_cpu_pm_init();
>  
> @@ -1719,8 +1734,6 @@ static int __init gic_init_bases(void __iomem *dist_base,
>  			gicv2m_init(handle, gic_data.domain);
>  	}
>  
> -	gic_enable_nmi_support();
> -
>  	return 0;
>  
>  out_free:
> -- 

Looks good to me. Please feel free to add:

	Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>

Thanks!
Masa
Yuichi Ito Nov. 18, 2020, 11:54 a.m. UTC | #2
Hi Sumit,

> Subject: [PATCH v7 2/7] irqchip/gic-v3: Enable support for SGIs to act as
> NMIs
> 
> Add support to handle SGIs as pseudo NMIs. As SGIs or IPIs default to a
> special flow handler: handle_percpu_devid_fasteoi_ipi(), so skip NMI handler
> update in case of SGIs.
> 
> Also, enable NMI support prior to gic_smp_init() as allocation of SGIs as
> IRQs/NMIs happen as part of this routine.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> ---
>  drivers/irqchip/irq-gic-v3.c | 29 +++++++++++++++++++++--------
>  1 file changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index
> 16fecc0..7010ae2 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -461,6 +461,7 @@ static u32 gic_get_ppi_index(struct irq_data *d)
> static int gic_irq_nmi_setup(struct irq_data *d)  {
>  	struct irq_desc *desc = irq_to_desc(d->irq);
> +	u32 idx;
> 
>  	if (!gic_supports_nmi())
>  		return -EINVAL;
> @@ -478,16 +479,22 @@ static int gic_irq_nmi_setup(struct irq_data *d)
>  		return -EINVAL;
> 
>  	/* desc lock should already be held */
> -	if (gic_irq_in_rdist(d)) {
> -		u32 idx = gic_get_ppi_index(d);
> +	switch (get_intid_range(d)) {
> +	case SGI_RANGE:
> +		break;
> +	case PPI_RANGE:
> +	case EPPI_RANGE:
> +		idx = gic_get_ppi_index(d);
> 
>  		/* Setting up PPI as NMI, only switch handler for first NMI */
>  		if (!refcount_inc_not_zero(&ppi_nmi_refs[idx])) {
>  			refcount_set(&ppi_nmi_refs[idx], 1);
>  			desc->handle_irq =
> handle_percpu_devid_fasteoi_nmi;
>  		}
> -	} else {
> +		break;
> +	default:
>  		desc->handle_irq = handle_fasteoi_nmi;
> +		break;
>  	}
> 
>  	gic_irq_set_prio(d, GICD_INT_NMI_PRI); @@ -498,6 +505,7 @@
> static int gic_irq_nmi_setup(struct irq_data *d)  static void
> gic_irq_nmi_teardown(struct irq_data *d)  {
>  	struct irq_desc *desc = irq_to_desc(d->irq);
> +	u32 idx;
> 
>  	if (WARN_ON(!gic_supports_nmi()))
>  		return;
> @@ -515,14 +523,20 @@ static void gic_irq_nmi_teardown(struct irq_data *d)
>  		return;
> 
>  	/* desc lock should already be held */
> -	if (gic_irq_in_rdist(d)) {
> -		u32 idx = gic_get_ppi_index(d);
> +	switch (get_intid_range(d)) {
> +	case SGI_RANGE:
> +		break;
> +	case PPI_RANGE:
> +	case EPPI_RANGE:
> +		idx = gic_get_ppi_index(d);
> 
>  		/* Tearing down NMI, only switch handler for last NMI */
>  		if (refcount_dec_and_test(&ppi_nmi_refs[idx]))
>  			desc->handle_irq = handle_percpu_devid_irq;
> -	} else {
> +		break;
> +	default:
>  		desc->handle_irq = handle_fasteoi_irq;
> +		break;
>  	}
> 
>  	gic_irq_set_prio(d, GICD_INT_DEF_PRI); @@ -1708,6 +1722,7 @@
> static int __init gic_init_bases(void __iomem *dist_base,
> 
>  	gic_dist_init();
>  	gic_cpu_init();
> +	gic_enable_nmi_support();
>  	gic_smp_init();
>  	gic_cpu_pm_init();
> 
> @@ -1719,8 +1734,6 @@ static int __init gic_init_bases(void __iomem
> *dist_base,
>  			gicv2m_init(handle, gic_data.domain);
>  	}
> 
> -	gic_enable_nmi_support();
> -
>  	return 0;
> 
>  out_free:
> --
> 2.7.4

I checked for this patch and I think that's good.
I've tested this patch with FX1000 used my other patches.
The result is as follows.

$ echo 1 > /proc/sys/kernel/panic_on_rcu_stal
$ echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
   : kernel panics and crash kernel boot
   : makedumpfile saves the system state at HARDLOCKUP in vmcore.

crash utility:
 #7 [fffffe0029e4fd30] lkdtm_HARDLOCKUP at fffffe0010856eec
 #8 [fffffe0029e4fd40] direct_entry at fffffe0010856c94
 #9 [fffffe0029e4fd90] full_proxy_write at fffffe001055ced0
#10 [fffffe0029e4fdd0] vfs_write at fffffe001047436c
#11 [fffffe0029e4fe10] ksys_write at fffffe001047466c
#12 [fffffe0029e4fe60] __arm64_sys_write at fffffe0010474718
#13 [fffffe0029e4fe70] do_el0_svc at fffffe00101590cc
#14 [fffffe0029e4fea0] el0_svc at fffffe0010147a30
#15 [fffffe0029e4feb0] el0_sync_handler at fffffe001014835c
#16 [fffffe0029e4fff0] el0_sync at fffffe0010142c14

Best regards,

Yuichi Ito
diff mbox series

Patch

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 16fecc0..7010ae2 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -461,6 +461,7 @@  static u32 gic_get_ppi_index(struct irq_data *d)
 static int gic_irq_nmi_setup(struct irq_data *d)
 {
 	struct irq_desc *desc = irq_to_desc(d->irq);
+	u32 idx;
 
 	if (!gic_supports_nmi())
 		return -EINVAL;
@@ -478,16 +479,22 @@  static int gic_irq_nmi_setup(struct irq_data *d)
 		return -EINVAL;
 
 	/* desc lock should already be held */
-	if (gic_irq_in_rdist(d)) {
-		u32 idx = gic_get_ppi_index(d);
+	switch (get_intid_range(d)) {
+	case SGI_RANGE:
+		break;
+	case PPI_RANGE:
+	case EPPI_RANGE:
+		idx = gic_get_ppi_index(d);
 
 		/* Setting up PPI as NMI, only switch handler for first NMI */
 		if (!refcount_inc_not_zero(&ppi_nmi_refs[idx])) {
 			refcount_set(&ppi_nmi_refs[idx], 1);
 			desc->handle_irq = handle_percpu_devid_fasteoi_nmi;
 		}
-	} else {
+		break;
+	default:
 		desc->handle_irq = handle_fasteoi_nmi;
+		break;
 	}
 
 	gic_irq_set_prio(d, GICD_INT_NMI_PRI);
@@ -498,6 +505,7 @@  static int gic_irq_nmi_setup(struct irq_data *d)
 static void gic_irq_nmi_teardown(struct irq_data *d)
 {
 	struct irq_desc *desc = irq_to_desc(d->irq);
+	u32 idx;
 
 	if (WARN_ON(!gic_supports_nmi()))
 		return;
@@ -515,14 +523,20 @@  static void gic_irq_nmi_teardown(struct irq_data *d)
 		return;
 
 	/* desc lock should already be held */
-	if (gic_irq_in_rdist(d)) {
-		u32 idx = gic_get_ppi_index(d);
+	switch (get_intid_range(d)) {
+	case SGI_RANGE:
+		break;
+	case PPI_RANGE:
+	case EPPI_RANGE:
+		idx = gic_get_ppi_index(d);
 
 		/* Tearing down NMI, only switch handler for last NMI */
 		if (refcount_dec_and_test(&ppi_nmi_refs[idx]))
 			desc->handle_irq = handle_percpu_devid_irq;
-	} else {
+		break;
+	default:
 		desc->handle_irq = handle_fasteoi_irq;
+		break;
 	}
 
 	gic_irq_set_prio(d, GICD_INT_DEF_PRI);
@@ -1708,6 +1722,7 @@  static int __init gic_init_bases(void __iomem *dist_base,
 
 	gic_dist_init();
 	gic_cpu_init();
+	gic_enable_nmi_support();
 	gic_smp_init();
 	gic_cpu_pm_init();
 
@@ -1719,8 +1734,6 @@  static int __init gic_init_bases(void __iomem *dist_base,
 			gicv2m_init(handle, gic_data.domain);
 	}
 
-	gic_enable_nmi_support();
-
 	return 0;
 
 out_free: