diff mbox series

[net-next,3/5] r8152: add MCU typed read/write functions

Message ID 20201103192226.2455-4-kabel@kernel.org (mailing list archive)
State New, archived
Headers show
Series r8152 changes | expand

Commit Message

Marek Behún Nov. 3, 2020, 7:22 p.m. UTC 
Add pla_ and usb_ prefixed versions of ocp_read_* and ocp_write_*
functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB
as parameter.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/net/usb/r8152.c | 673 ++++++++++++++++++++--------------------
 1 file changed, 338 insertions(+), 335 deletions(-)

Comments

Vladimir Oltean Nov. 3, 2020, 9:47 p.m. UTC | #1 
On Tue, Nov 03, 2020 at 08:22:24PM +0100, Marek Behún wrote:
> Add pla_ and usb_ prefixed versions of ocp_read_* and ocp_write_*
> functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB
> as parameter.
> 
> Signed-off-by: Marek Behún <kabel@kernel.org>
> ---

You just made it harder for everyone to follow the code through pattern
matching. Token concatenation should be banned from the C preprocessor.
Marek Behún Nov. 4, 2020, 5:55 a.m. UTC | #2 
On Tue, 3 Nov 2020 23:47:12 +0200
Vladimir Oltean <olteanv@gmail.com> wrote:

> On Tue, Nov 03, 2020 at 08:22:24PM +0100, Marek Behún wrote:
> > Add pla_ and usb_ prefixed versions of ocp_read_* and ocp_write_*
> > functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB
> > as parameter.
> > 
> > Signed-off-by: Marek Behún <kabel@kernel.org>
> > ---  
> 
> You just made it harder for everyone to follow the code through pattern
> matching. Token concatenation should be banned from the C preprocessor.

So you aren't complaining about the definition of pla_ and usb_
functions, just that they are defined via macros?
Vladimir Oltean Nov. 4, 2020, 8:47 a.m. UTC | #3 
On Wed, Nov 04, 2020 at 06:55:24AM +0100, Marek Behún wrote:
> On Tue, 3 Nov 2020 23:47:12 +0200
> Vladimir Oltean <olteanv@gmail.com> wrote:
> 
> > On Tue, Nov 03, 2020 at 08:22:24PM +0100, Marek Behún wrote:
> > > Add pla_ and usb_ prefixed versions of ocp_read_* and ocp_write_*
> > > functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB
> > > as parameter.
> > > 
> > > Signed-off-by: Marek Behún <kabel@kernel.org>
> > > ---  
> > 
> > You just made it harder for everyone to follow the code through pattern
> > matching. Token concatenation should be banned from the C preprocessor.
> 
> So you aren't complaining about the definition of pla_ and usb_
> functions, just that they are defined via macros?

Yes.
Marek Behún Nov. 4, 2020, 10:25 a.m. UTC | #4 
On Wed, 4 Nov 2020 10:47:10 +0200
Vladimir Oltean <olteanv@gmail.com> wrote:

> > So you aren't complaining about the definition of pla_ and usb_
> > functions, just that they are defined via macros?  
> 
> Yes.

What if concatenation wasn't used, but the functions were still defined
with macro?

DEFINE_READ_FUNC(pla_ocp_read_byte, u8, MCU_TYPE_PLA, ocp_read_byte)
DEFINE_WRITE_FUNC(pla_ocp_write_byte, u8, MCU_TYPE_PLA, ocp_write_byte)

DEFINE_READ_FUNC(pla_ocp_read_word, u16, MCU_TYPE_PLA, ocp_read_word)
DEFINE_WRITE_FUNC(pla_ocp_write_word, u16, MCU_TYPE_PLA, ocp_write_word)

DEFINE_READ_FUNC(pla_ocp_read_dword, u32, MCU_TYPE_PLA, ocp_read_dword)
DEFINE_WRITE_FUNC(pla_ocp_write_dword, u32, MCU_TYPE_PLA, ocp_write_dword)

DEFINE_READ_FUNC(usb_ocp_read_byte, u8, MCU_TYPE_USB, ocp_read_byte)
DEFINE_WRITE_FUNC(usb_ocp_write_byte, u8, MCU_TYPE_USB, ocp_write_byte)

DEFINE_READ_FUNC(usb_ocp_read_word, u16, MCU_TYPE_USB, ocp_read_word)
DEFINE_WRITE_FUNC(usb_ocp_write_word, u16, MCU_TYPE_USB, ocp_write_word)

DEFINE_READ_FUNC(usb_ocp_read_dword, u32, MCU_TYPE_USB, ocp_read_dword)
DEFINE_WRITE_FUNC(usb_ocp_write_dword, u32, MCU_TYPE_USB, ocp_write_dword)

This way there is no concantenation. Or should I abandon macros at all?

Marek
Marek Behún Nov. 4, 2020, 10:35 a.m. UTC | #5 
Or something like this?

#define DEF_R_FUNC(_t, _r, _r_i, _mcu)				\
static inline _t _r(struct r8152 *tp, u16 index)		\
{								\
	return _r_i(tp, _mcu, index);				\
}

#define DEF_W_FUNC(_t, _w, _w_i, _mcu)				\
static inline void _w(struct r8152 *tp, u16 index, _t data)	\
{								\
	_w_i(tp, _mcu, index, data);				\
}

DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA)
DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA)
DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA)
DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA)
DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA)
DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)

DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB)
DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB)
DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB)
DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB)
DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB)
DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)
Vladimir Oltean Nov. 4, 2020, 11 a.m. UTC | #6 
On Wed, Nov 04, 2020 at 11:35:45AM +0100, Marek Behún wrote:
> Or something like this?
> 
> #define DEF_R_FUNC(_t, _r, _r_i, _mcu)				\
> static inline _t _r(struct r8152 *tp, u16 index)		\
> {								\
> 	return _r_i(tp, _mcu, index);				\
> }
> 
> #define DEF_W_FUNC(_t, _w, _w_i, _mcu)				\
> static inline void _w(struct r8152 *tp, u16 index, _t data)	\
> {								\
> 	_w_i(tp, _mcu, index, data);				\
> }
> 
> DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA)
> DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA)
> DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA)
> DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA)
> DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA)
> DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)
> 
> DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB)
> DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB)
> DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB)
> DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB)
> DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB)
> DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)

I'm not sure it's worth the change :(
Let's put it another way, your diffstat has 338 insertions and 335
deletions. Aka you're saving 3 lines overall.
With this new approach that doesn't use token concatenation at all,
you're probably not saving anything at all.
Also, I'm not sure that you need to make the functions inline. The
compiler should be smart enough to not generate functions for
usb_ocp_read_byte etc. You can check with
"make drivers/net/usb/r8152.lst".
Marek Behún Nov. 4, 2020, 11:10 a.m. UTC | #7 
On Wed, 4 Nov 2020 13:00:59 +0200
Vladimir Oltean <olteanv@gmail.com> wrote:

> On Wed, Nov 04, 2020 at 11:35:45AM +0100, Marek Behún wrote:
> > Or something like this?
> > 
> > #define DEF_R_FUNC(_t, _r, _r_i, _mcu)				\
> > static inline _t _r(struct r8152 *tp, u16 index)		\
> > {								\
> > 	return _r_i(tp, _mcu, index);				\
> > }
> > 
> > #define DEF_W_FUNC(_t, _w, _w_i, _mcu)				\
> > static inline void _w(struct r8152 *tp, u16 index, _t data)	\
> > {								\
> > 	_w_i(tp, _mcu, index, data);				\
> > }
> > 
> > DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA)
> > DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA)
> > DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA)
> > DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA)
> > DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA)
> > DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)
> > 
> > DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB)
> > DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB)
> > DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB)
> > DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB)
> > DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB)
> > DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)  
> 
> I'm not sure it's worth the change :(
> Let's put it another way, your diffstat has 338 insertions and 335
> deletions. Aka you're saving 3 lines overall.
> With this new approach that doesn't use token concatenation at all,
> you're probably not saving anything at all.
> Also, I'm not sure that you need to make the functions inline. The
> compiler should be smart enough to not generate functions for
> usb_ocp_read_byte etc. You can check with
> "make drivers/net/usb/r8152.lst".

Vladimir, the purpose of this patch isn't to save lines, but to save us
from always writing MCU_TYPE_USB / MCU_TYPE_PLA.
It just transforms forms of
  ocp_read_word(tp, MCU_TYPE_USB, idx);
  ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
into
  usb_ocp_read_word(tp, idx);
  pla_ocp_write_dword(tp, idx, val);

The fifth patch of this series saves lines by adding _modify functions,
to transform
  val = *_read(idx);
  val &= ~clr;
  val |= set;
  *_write(idx, val);
into
  *_modify(idx, clr, set);
Vladimir Oltean Nov. 4, 2020, 12:14 p.m. UTC | #8 
On Wed, Nov 04, 2020 at 12:10:53PM +0100, Marek Behún wrote:
> > I'm not sure it's worth the change :(
> > Let's put it another way, your diffstat has 338 insertions and 335
> > deletions. Aka you're saving 3 lines overall.
> > With this new approach that doesn't use token concatenation at all,
> > you're probably not saving anything at all.
> > Also, I'm not sure that you need to make the functions inline. The
> > compiler should be smart enough to not generate functions for
> > usb_ocp_read_byte etc. You can check with
> > "make drivers/net/usb/r8152.lst".
> 
> Vladimir, the purpose of this patch isn't to save lines, but to save us
> from always writing MCU_TYPE_USB / MCU_TYPE_PLA.
> It just transforms forms of
>   ocp_read_word(tp, MCU_TYPE_USB, idx);
>   ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
> into
>   usb_ocp_read_word(tp, idx);
>   pla_ocp_write_dword(tp, idx, val);
> 
> The fifth patch of this series saves lines by adding _modify functions,
> to transform
>   val = *_read(idx);
>   val &= ~clr;
>   val |= set;
>   *_write(idx, val);
> into
>   *_modify(idx, clr, set);
> 

So if the point isn't to save lines, then why don't you go for something
trivial?

static void ocp_modify_byte(struct r8152 *tp, u16 type, u16 index, u8 clr,
			    u8 set)
{
	u8 val = ocp_read_byte(tp, type, index);

	ocp_write_byte(tp, type, index, (val & ~clr) | set);
}

static void ocp_modify_word(struct r8152 *tp, u16 type, u16 index, u16 clr,
			    u16 set)
{
	u16 val = ocp_read_word(tp, type, index);

	ocp_write_word(tp, type, index, (val & ~clr) | set);
}

static void ocp_modify_dword(struct r8152 *tp, u16 type, u16 index, u32 clr,
			     u32 set)
{
	u32 val = ocp_read_dword(tp, type, index);

	ocp_write_dword(tp, type, index, (val & ~clr) | set);
}

#define pla_ocp_read_byte(tp, index)				\
	ocp_read_byte(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_byte(tp, index, data)			\
	ocp_write_byte(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_byte(tp, index, clr, set)		\
	ocp_modify_byte(tp, MCU_TYPE_PLA, index, clr, set)
#define pla_ocp_read_word(tp, index)				\
	ocp_read_word(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_word(tp, index, data)			\
	ocp_write_word(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_word(tp, index, clr, set)		\
	ocp_modify_word(tp, MCU_TYPE_PLA, index, clr, set)
#define pla_ocp_read_dword(tp, index)				\
	ocp_read_dword(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_dword(tp, index, data)			\
	ocp_write_dword(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_dword(tp, index, clr, set)		\
	ocp_modify_dword(tp, MCU_TYPE_PLA, index, clr, set)

#define usb_ocp_read_byte(tp, index)				\
	ocp_read_byte(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_byte(tp, index, data)			\
	ocp_write_byte(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_byte(tp, index, clr, set)		\
	ocp_modify_byte(tp, MCU_TYPE_USB, index, clr, set)
#define usb_ocp_read_word(tp, index)				\
	ocp_read_word(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_word(tp, index, data)			\
	ocp_write_word(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_word(tp, index, clr, set)		\
	ocp_modify_word(tp, MCU_TYPE_USB, index, clr, set)
#define usb_ocp_read_dword(tp, index)				\
	ocp_read_dword(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_dword(tp, index, data)			\
	ocp_write_dword(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_dword(tp, index, clr, set)		\
	ocp_modify_dword(tp, MCU_TYPE_USB, index, clr, set)

To my eyes this is easier to digest.

That is, unless you want to go for function pointers and have separate
structures for PLA and USB...
Jakub Kicinski Nov. 4, 2020, 9:07 p.m. UTC | #9 
On Wed, 4 Nov 2020 14:14:24 +0200 Vladimir Oltean wrote:
> To my eyes this is easier to digest.

+1
Marek Behún Nov. 5, 2020, 9:54 a.m. UTC | #10 
On Wed, 4 Nov 2020 14:14:24 +0200
Vladimir Oltean <olteanv@gmail.com> wrote:

> On Wed, Nov 04, 2020 at 12:10:53PM +0100, Marek Behún wrote:
> > > I'm not sure it's worth the change :(
> > > Let's put it another way, your diffstat has 338 insertions and 335
> > > deletions. Aka you're saving 3 lines overall.
> > > With this new approach that doesn't use token concatenation at all,
> > > you're probably not saving anything at all.
> > > Also, I'm not sure that you need to make the functions inline. The
> > > compiler should be smart enough to not generate functions for
> > > usb_ocp_read_byte etc. You can check with
> > > "make drivers/net/usb/r8152.lst".  
> > 
> > Vladimir, the purpose of this patch isn't to save lines, but to save us
> > from always writing MCU_TYPE_USB / MCU_TYPE_PLA.
> > It just transforms forms of
> >   ocp_read_word(tp, MCU_TYPE_USB, idx);
> >   ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
> > into
> >   usb_ocp_read_word(tp, idx);
> >   pla_ocp_write_dword(tp, idx, val);
> > 
> > The fifth patch of this series saves lines by adding _modify functions,
> > to transform
> >   val = *_read(idx);
> >   val &= ~clr;
> >   val |= set;
> >   *_write(idx, val);
> > into
> >   *_modify(idx, clr, set);
> >   
> 
> So if the point isn't to save lines, then why don't you go for something
> trivial?
> 
> static void ocp_modify_byte(struct r8152 *tp, u16 type, u16 index, u8 clr,
> 			    u8 set)
> {
> 	u8 val = ocp_read_byte(tp, type, index);
> 
> 	ocp_write_byte(tp, type, index, (val & ~clr) | set);
> }
> 
> static void ocp_modify_word(struct r8152 *tp, u16 type, u16 index, u16 clr,
> 			    u16 set)
> {
> 	u16 val = ocp_read_word(tp, type, index);
> 
> 	ocp_write_word(tp, type, index, (val & ~clr) | set);
> }
> 
> static void ocp_modify_dword(struct r8152 *tp, u16 type, u16 index, u32 clr,
> 			     u32 set)
> {
> 	u32 val = ocp_read_dword(tp, type, index);
> 
> 	ocp_write_dword(tp, type, index, (val & ~clr) | set);
> }
> 
> #define pla_ocp_read_byte(tp, index)				\
> 	ocp_read_byte(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_byte(tp, index, data)			\
> 	ocp_write_byte(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_byte(tp, index, clr, set)		\
> 	ocp_modify_byte(tp, MCU_TYPE_PLA, index, clr, set)
> #define pla_ocp_read_word(tp, index)				\
> 	ocp_read_word(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_word(tp, index, data)			\
> 	ocp_write_word(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_word(tp, index, clr, set)		\
> 	ocp_modify_word(tp, MCU_TYPE_PLA, index, clr, set)
> #define pla_ocp_read_dword(tp, index)				\
> 	ocp_read_dword(tp, MCU_TYPE_PLA, index)
> #define pla_ocp_write_dword(tp, index, data)			\
> 	ocp_write_dword(tp, MCU_TYPE_PLA, index, data)
> #define pla_ocp_modify_dword(tp, index, clr, set)		\
> 	ocp_modify_dword(tp, MCU_TYPE_PLA, index, clr, set)
> 
> #define usb_ocp_read_byte(tp, index)				\
> 	ocp_read_byte(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_byte(tp, index, data)			\
> 	ocp_write_byte(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_byte(tp, index, clr, set)		\
> 	ocp_modify_byte(tp, MCU_TYPE_USB, index, clr, set)
> #define usb_ocp_read_word(tp, index)				\
> 	ocp_read_word(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_word(tp, index, data)			\
> 	ocp_write_word(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_word(tp, index, clr, set)		\
> 	ocp_modify_word(tp, MCU_TYPE_USB, index, clr, set)
> #define usb_ocp_read_dword(tp, index)				\
> 	ocp_read_dword(tp, MCU_TYPE_USB, index)
> #define usb_ocp_write_dword(tp, index, data)			\
> 	ocp_write_dword(tp, MCU_TYPE_USB, index, data)
> #define usb_ocp_modify_dword(tp, index, clr, set)		\
> 	ocp_modify_dword(tp, MCU_TYPE_USB, index, clr, set)
> 
> To my eyes this is easier to digest.
> 
> That is, unless you want to go for function pointers and have separate
> structures for PLA and USB...

I thought that static inline functions are preferred to macros, since
compiler warns better if they are used incorrectly...
Vladimir Oltean Nov. 5, 2020, 10:56 a.m. UTC | #11 
On Thu, Nov 05, 2020 at 10:54:18AM +0100, Marek Behún wrote:
> I thought that static inline functions are preferred to macros, since
> compiler warns better if they are used incorrectly...

Citation needed. Also, how do static inline functions wrapped in macros
(i.e. your patch) stack up against your claim about better warnings?
I guess ease of maintainership should prevail here, and Hayes should
have the final word. I don't really have any stake here.
Marek Behún Nov. 5, 2020, 11:30 a.m. UTC | #12 
On Thu, 5 Nov 2020 12:56:42 +0200
Vladimir Oltean <olteanv@gmail.com> wrote:

> On Thu, Nov 05, 2020 at 10:54:18AM +0100, Marek Behún wrote:
> > I thought that static inline functions are preferred to macros, since
> > compiler warns better if they are used incorrectly...  
> 
> Citation needed.

Just search for substring "instead of macro" in git log, there are
multiple such changes that were accepted since it provides better
typechecking. I am not saying it is documented anywhere, just that I
thought it was preffered.

> Also, how do static inline functions wrapped in macros
> (i.e. your patch) stack up against your claim about better warnings?

If they are defined as functions (they don't have to be inline,
of course) instead of macros and they are used incorrectly, the compiler
provides more readable warnings. (Yes, in current versions of gcc it is
much better than in the past, but still there are more lines of
warnings printed: "in expansion of macro"...).


> I guess ease of maintainership should prevail here, and Hayes should
> have the final word. I don't really have any stake here.

Vladimir, your arguments are valid and I accept the reasoning.
I too can see that the resulting code is a little awkward.

Marek
Vladimir Oltean Nov. 5, 2020, 12:06 p.m. UTC | #13 
On Thu, Nov 05, 2020 at 12:30:43PM +0100, Marek Behún wrote:
> On Thu, 5 Nov 2020 12:56:42 +0200
> Vladimir Oltean <olteanv@gmail.com> wrote:
>
> > On Thu, Nov 05, 2020 at 10:54:18AM +0100, Marek Behún wrote:
> > > I thought that static inline functions are preferred to macros, since
> > > compiler warns better if they are used incorrectly...
> >
> > Citation needed.
>
> Just search for substring "instead of macro" in git log, there are
> multiple such changes that were accepted since it provides better
> typechecking. I am not saying it is documented anywhere, just that I
> thought it was preffered.
>
> > Also, how do static inline functions wrapped in macros
> > (i.e. your patch) stack up against your claim about better warnings?
>
> If they are defined as functions (they don't have to be inline,
> of course) instead of macros and they are used incorrectly, the compiler
> provides more readable warnings. (Yes, in current versions of gcc it is
> much better than in the past, but still there are more lines of
> warnings printed: "in expansion of macro"...).

Ok, but I mean, we're not even in contradiction at this point? I only
provided you macro definitions of pla_ocp_* and usb_ocp_* to prove that
they can be defined in a cleaner way than your attempt. If you still
think it's worth having the pla_ocp_* and usb_ocp_* helpers defined as
separate functions just to avoid passing the extra MCU_TYPE_* argument,
then go ahead.
Hayes Wang Nov. 6, 2020, 3:01 a.m. UTC | #14 
Vladimir Oltean <olteanv@gmail.com>
> Sent: Thursday, November 5, 2020 6:57 PM
> On Thu, Nov 05, 2020 at 10:54:18AM +0100, Marek Behún wrote:
> > I thought that static inline functions are preferred to macros, since
> > compiler warns better if they are used incorrectly...
> 
> Citation needed. Also, how do static inline functions wrapped in macros
> (i.e. your patch) stack up against your claim about better warnings?
> I guess ease of maintainership should prevail here, and Hayes should
> have the final word. I don't really have any stake here.

I agree with Vladimir Oltean.

I prefer to the way of easy maintaining.
I don't understand the advantage which you discuss.
However, if I am not familiar with the code, this patch
would let me take more time to find out the declarations
of these functions. This make it harder to trace the code.

Best Regards,
Hayes
Marek Behún Nov. 6, 2020, 6:39 a.m. UTC | #15 
On Fri, 6 Nov 2020 03:01:22 +0000
Hayes Wang <hayeswang@realtek.com> wrote:

> Vladimir Oltean <olteanv@gmail.com>
> > Sent: Thursday, November 5, 2020 6:57 PM
> > On Thu, Nov 05, 2020 at 10:54:18AM +0100, Marek Behún wrote:  
> > > I thought that static inline functions are preferred to macros, since
> > > compiler warns better if they are used incorrectly...  
> > 
> > Citation needed. Also, how do static inline functions wrapped in macros
> > (i.e. your patch) stack up against your claim about better warnings?
> > I guess ease of maintainership should prevail here, and Hayes should
> > have the final word. I don't really have any stake here.  
> 
> I agree with Vladimir Oltean.
> 
> I prefer to the way of easy maintaining.
> I don't understand the advantage which you discuss.
> However, if I am not familiar with the code, this patch
> would let me take more time to find out the declarations
> of these functions. This make it harder to trace the code.

Hi Hayes,

just to be clear:
Are you against defining these functions via macros?
If so, I can simply rewrite this so that it does not use macros...

Or are you against implementing these functions themselves? Should I
abandon this at all?

BTW, what about patch 5/5 which introduces *_modify helpers?
Patch 5/5 simplifies the driver a lot, IMO, changing this

  ocp_data = usb_ocp_read_word(tp, USB_PM_CTRL_STATUS);
  ocp_data &= ~RESUME_INDICATE;
  usb_ocp_write_word(tp, USB_PM_CTRL_STATUS, ocp_data);

into this

  usb_ocp_modify_word(tp, USB_PM_CTRL_STATUS, RESUME_INDICATE, 0);

Marek
Hayes Wang Nov. 6, 2020, 7:39 a.m. UTC | #16 
Marek Behún <kabel@kernel.org>
> Sent: Friday, November 6, 2020 2:40 PM
[...]
> Hi Hayes,
> 
> just to be clear:
> Are you against defining these functions via macros?
> If so, I can simply rewrite this so that it does not use macros...

I would like the way which let me find the source of the
function easily. I don't like that I couldn't find where these
functions are defined, when I search whole the source code.

For example, for the method which Vladimir Oltean provides,
when I search the keyword "pla_ocp_read_byte", I could easily
find out that the source function is "ocp_read_byte".
However, for your patch, I could only find where the function
is used. I think it is not friendly for the newbie who is not
familiar with this driver.

However, I don't think I am the decision maker. This is
just my view.

> Or are you against implementing these functions themselves?

No.

> 
> BTW, what about patch 5/5 which introduces *_modify helpers?

It is fine.

Best Regards,
Hayes
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 96bef1c027f2..905859309db4 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1305,18 +1305,37 @@  static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
 	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
 }
 
+#define DEFINE_FUNCS_FOR_MCU_TYPE(_p, _mcutype, _t, _n)			\
+static inline _t _p ## _ocp_read_ ## _n(struct r8152 *tp, u16 index)	\
+{									\
+	return ocp_read_ ## _n(tp, _mcutype, index);			\
+}									\
+static inline void _p ## _ocp_write_ ## _n(struct r8152 *tp, u16 index,	\
+					   _t data)			\
+{									\
+	ocp_write_ ## _n(tp, _mcutype, index, data);			\
+}
+
+DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u8, byte)
+DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u16, word)
+DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u32, dword)
+
+DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u8, byte)
+DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u16, word)
+DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u32, dword)
+
 static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
 {
 	u16 ocp_base, ocp_index;
 
 	ocp_base = addr & 0xf000;
 	if (ocp_base != tp->ocp_base) {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		pla_ocp_write_word(tp, PLA_OCP_GPHY_BASE, ocp_base);
 		tp->ocp_base = ocp_base;
 	}
 
 	ocp_index = (addr & 0x0fff) | 0xb000;
-	return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
+	return pla_ocp_read_word(tp, ocp_index);
 }
 
 static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
@@ -1325,12 +1344,12 @@  static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
 
 	ocp_base = addr & 0xf000;
 	if (ocp_base != tp->ocp_base) {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		pla_ocp_write_word(tp, PLA_OCP_GPHY_BASE, ocp_base);
 		tp->ocp_base = ocp_base;
 	}
 
 	ocp_index = (addr & 0x0fff) | 0xb000;
-	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
+	pla_ocp_write_word(tp, ocp_index, data);
 }
 
 static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
@@ -1405,9 +1424,9 @@  static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_CONFIG);
 	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_NORAML);
 
 	mutex_unlock(&tp->control);
 
@@ -1438,10 +1457,10 @@  static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
 		mac_strlen = 0x16;
 	} else {
 		/* test for -AD variant of RTL8153 */
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+		ocp_data = usb_ocp_read_word(tp, USB_MISC_0);
 		if ((ocp_data & AD_MASK) == 0x1000) {
 			/* test for MAC address pass-through bit */
-			ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+			ocp_data = usb_ocp_read_byte(tp, EFUSE);
 			if ((ocp_data & PASS_THRU_MASK) != 1) {
 				netif_dbg(tp, probe, tp->netdev,
 						"No efuse for RTL8153-AD MAC pass through\n");
@@ -1449,7 +1468,7 @@  static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
 			}
 		} else {
 			/* test for RTL8153-BND and RTL8153-BD */
-			ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+			ocp_data = usb_ocp_read_byte(tp, USB_MISC_1);
 			if ((ocp_data & BND_MASK) == 0 && (ocp_data & BD_MASK) == 0) {
 				netif_dbg(tp, probe, tp->netdev,
 						"Invalid variant for MAC pass through\n");
@@ -2533,7 +2552,7 @@  static void _rtl8152_set_rx_mode(struct net_device *netdev)
 	u32 ocp_data;
 
 	netif_stop_queue(netdev);
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
 	ocp_data |= RCR_AB | RCR_APM;
 
@@ -2566,7 +2585,7 @@  static void _rtl8152_set_rx_mode(struct net_device *netdev)
 	tmp[1] = __cpu_to_le32(swab32(mc_filter[0]));
 
 	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 	netif_wake_queue(netdev);
 }
 
@@ -2614,21 +2633,21 @@  static void r8152b_reset_packet_filter(struct r8152 *tp)
 {
 	u32	ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+	ocp_data = pla_ocp_read_word(tp, PLA_FMC);
 	ocp_data &= ~FMC_FCR_MCU_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	pla_ocp_write_word(tp, PLA_FMC, ocp_data);
 	ocp_data |= FMC_FCR_MCU_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	pla_ocp_write_word(tp, PLA_FMC, ocp_data);
 }
 
 static void rtl8152_nic_reset(struct r8152 *tp)
 {
 	int	i;
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
+	pla_ocp_write_byte(tp, PLA_CR, CR_RST);
 
 	for (i = 0; i < 1000; i++) {
-		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+		if (!(pla_ocp_read_byte(tp, PLA_CR) & CR_RST))
 			break;
 		usleep_range(100, 400);
 	}
@@ -2644,7 +2663,7 @@  static void set_tx_qlen(struct r8152 *tp)
 
 static inline u8 rtl8152_get_speed(struct r8152 *tp)
 {
-	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+	return pla_ocp_read_byte(tp, PLA_PHYSTATUS);
 }
 
 static void rtl_set_eee_plus(struct r8152 *tp)
@@ -2654,13 +2673,13 @@  static void rtl_set_eee_plus(struct r8152 *tp)
 
 	speed = rtl8152_get_speed(tp);
 	if (speed & _10bps) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data = pla_ocp_read_word(tp, PLA_EEEP_CR);
 		ocp_data |= EEEP_CR_EEEP_TX;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+		pla_ocp_write_word(tp, PLA_EEEP_CR, ocp_data);
 	} else {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data = pla_ocp_read_word(tp, PLA_EEEP_CR);
 		ocp_data &= ~EEEP_CR_EEEP_TX;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+		pla_ocp_write_word(tp, PLA_EEEP_CR, ocp_data);
 	}
 }
 
@@ -2668,12 +2687,12 @@  static void rxdy_gated_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data = pla_ocp_read_word(tp, PLA_MISC_1);
 	if (enable)
 		ocp_data |= RXDY_GATED_EN;
 	else
 		ocp_data &= ~RXDY_GATED_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+	pla_ocp_write_word(tp, PLA_MISC_1, ocp_data);
 }
 
 static int rtl_start_rx(struct r8152 *tp)
@@ -2761,8 +2780,7 @@  static int rtl_stop_rx(struct r8152 *tp)
 
 static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
 {
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
-		       OWN_UPDATE | OWN_CLEAR);
+	usb_ocp_write_byte(tp, USB_UPT_RXDMA_OWN, OWN_UPDATE | OWN_CLEAR);
 }
 
 static int rtl_enable(struct r8152 *tp)
@@ -2771,9 +2789,9 @@  static int rtl_enable(struct r8152 *tp)
 
 	r8152b_reset_packet_filter(tp);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+	ocp_data = pla_ocp_read_byte(tp, PLA_CR);
 	ocp_data |= CR_RE | CR_TE;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+	pla_ocp_write_byte(tp, PLA_CR, ocp_data);
 
 	switch (tp->version) {
 	case RTL_VER_08:
@@ -2809,8 +2827,7 @@  static void r8153_set_rx_early_timeout(struct r8152 *tp)
 	case RTL_VER_04:
 	case RTL_VER_05:
 	case RTL_VER_06:
-		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
-			       ocp_data);
+		usb_ocp_write_word(tp, USB_RX_EARLY_TIMEOUT, ocp_data);
 		break;
 
 	case RTL_VER_08:
@@ -2818,10 +2835,8 @@  static void r8153_set_rx_early_timeout(struct r8152 *tp)
 		/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
 		 * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
 		 */
-		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
-			       128 / 8);
-		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
-			       ocp_data);
+		usb_ocp_write_word(tp, USB_RX_EARLY_TIMEOUT, 128 / 8);
+		usb_ocp_write_word(tp, USB_RX_EXTRA_AGGR_TMR, ocp_data);
 		break;
 
 	default:
@@ -2838,13 +2853,11 @@  static void r8153_set_rx_early_size(struct r8152 *tp)
 	case RTL_VER_04:
 	case RTL_VER_05:
 	case RTL_VER_06:
-		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
-			       ocp_data / 4);
+		usb_ocp_write_word(tp, USB_RX_EARLY_SIZE, ocp_data / 4);
 		break;
 	case RTL_VER_08:
 	case RTL_VER_09:
-		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
-			       ocp_data / 8);
+		usb_ocp_write_word(tp, USB_RX_EARLY_SIZE, ocp_data / 8);
 		break;
 	default:
 		WARN_ON_ONCE(1);
@@ -2865,12 +2878,12 @@  static int rtl8153_enable(struct r8152 *tp)
 	if (tp->version == RTL_VER_09) {
 		u32 ocp_data;
 
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+		ocp_data = usb_ocp_read_word(tp, USB_FW_TASK);
 		ocp_data &= ~FC_PATCH_TASK;
-		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+		usb_ocp_write_word(tp, USB_FW_TASK, ocp_data);
 		usleep_range(1000, 2000);
 		ocp_data |= FC_PATCH_TASK;
-		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+		usb_ocp_write_word(tp, USB_FW_TASK, ocp_data);
 	}
 
 	return rtl_enable(tp);
@@ -2886,9 +2899,9 @@  static void rtl_disable(struct r8152 *tp)
 		return;
 	}
 
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 
 	rtl_drop_queued_tx(tp);
 
@@ -2898,14 +2911,14 @@  static void rtl_disable(struct r8152 *tp)
 	rxdy_gated_en(tp, true);
 
 	for (i = 0; i < 1000; i++) {
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
 			break;
 		usleep_range(1000, 2000);
 	}
 
 	for (i = 0; i < 1000; i++) {
-		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
+		if (pla_ocp_read_word(tp, PLA_TCR0) & TCR0_TX_EMPTY)
 			break;
 		usleep_range(1000, 2000);
 	}
@@ -2919,28 +2932,28 @@  static void r8152_power_cut_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_UPS_CTRL);
 	if (enable)
 		ocp_data |= POWER_CUT;
 	else
 		ocp_data &= ~POWER_CUT;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_UPS_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data = usb_ocp_read_word(tp, USB_PM_CTRL_STATUS);
 	ocp_data &= ~RESUME_INDICATE;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+	usb_ocp_write_word(tp, USB_PM_CTRL_STATUS, ocp_data);
 }
 
 static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data = pla_ocp_read_word(tp, PLA_CPCR);
 	if (enable)
 		ocp_data |= CPCR_RX_VLAN;
 	else
 		ocp_data &= ~CPCR_RX_VLAN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+	pla_ocp_write_word(tp, PLA_CPCR, ocp_data);
 }
 
 static int rtl8152_set_features(struct net_device *dev,
@@ -2978,11 +2991,11 @@  static u32 __rtl_get_wol(struct r8152 *tp)
 	u32 ocp_data;
 	u32 wolopts = 0;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	ocp_data = pla_ocp_read_word(tp, PLA_CONFIG34);
 	if (ocp_data & LINK_ON_WAKE_EN)
 		wolopts |= WAKE_PHY;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	ocp_data = pla_ocp_read_word(tp, PLA_CONFIG5);
 	if (ocp_data & UWF_EN)
 		wolopts |= WAKE_UCAST;
 	if (ocp_data & BWF_EN)
@@ -2990,7 +3003,7 @@  static u32 __rtl_get_wol(struct r8152 *tp)
 	if (ocp_data & MWF_EN)
 		wolopts |= WAKE_MCAST;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data = pla_ocp_read_word(tp, PLA_CFG_WOL);
 	if (ocp_data & MAGIC_EN)
 		wolopts |= WAKE_MAGIC;
 
@@ -3001,15 +3014,15 @@  static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
 {
 	u32 ocp_data;
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_CONFIG);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	ocp_data = pla_ocp_read_word(tp, PLA_CONFIG34);
 	ocp_data &= ~LINK_ON_WAKE_EN;
 	if (wolopts & WAKE_PHY)
 		ocp_data |= LINK_ON_WAKE_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+	pla_ocp_write_word(tp, PLA_CONFIG34, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	ocp_data = pla_ocp_read_word(tp, PLA_CONFIG5);
 	ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
 	if (wolopts & WAKE_UCAST)
 		ocp_data |= UWF_EN;
@@ -3017,15 +3030,15 @@  static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
 		ocp_data |= BWF_EN;
 	if (wolopts & WAKE_MCAST)
 		ocp_data |= MWF_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+	pla_ocp_write_word(tp, PLA_CONFIG5, ocp_data);
 
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_NORAML);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data = pla_ocp_read_word(tp, PLA_CFG_WOL);
 	ocp_data &= ~MAGIC_EN;
 	if (wolopts & WAKE_MAGIC)
 		ocp_data |= MAGIC_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+	pla_ocp_write_word(tp, PLA_CFG_WOL, ocp_data);
 
 	if (wolopts & WAKE_ANY)
 		device_set_wakeup_enable(&tp->udev->dev, true);
@@ -3037,22 +3050,21 @@  static void r8153_mac_clk_spd(struct r8152 *tp, bool enable)
 {
 	/* MAC clock speed down */
 	if (enable) {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
-			       ALDPS_SPDWN_RATIO);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
-			       EEE_SPDWN_RATIO);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
-			       PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
-			       U1U2_SPDWN_EN | L1_SPDWN_EN);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
-			       PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
-			       TP100_SPDWN_EN | TP500_SPDWN_EN | EEE_SPDWN_EN |
-			       TP1000_SPDWN_EN);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL3,
+				   PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
+				   U1U2_SPDWN_EN | L1_SPDWN_EN);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL4,
+				   PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN |
+				   TX10MIDLE_EN | TP100_SPDWN_EN |
+				   TP500_SPDWN_EN | EEE_SPDWN_EN |
+				   TP1000_SPDWN_EN);
 	} else {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL, 0);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL2, 0);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL3, 0);
+		pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL4, 0);
 	}
 }
 
@@ -3072,25 +3084,25 @@  static void r8153b_u1u2en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG);
+	ocp_data = usb_ocp_read_word(tp, USB_LPM_CONFIG);
 	if (enable)
 		ocp_data |= LPM_U1U2_EN;
 	else
 		ocp_data &= ~LPM_U1U2_EN;
 
-	ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data);
+	usb_ocp_write_word(tp, USB_LPM_CONFIG, ocp_data);
 }
 
 static void r8153_u2p3en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_U2P3_CTRL);
 	if (enable)
 		ocp_data |= U2P3_ENABLE;
 	else
 		ocp_data &= ~U2P3_ENABLE;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_U2P3_CTRL, ocp_data);
 }
 
 static void r8153b_ups_flags(struct r8152 *tp)
@@ -3162,7 +3174,7 @@  static void r8153b_ups_flags(struct r8152 *tp)
 		break;
 	}
 
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
+	usb_ocp_write_dword(tp, USB_UPS_FLAGS, ups_flags);
 }
 
 static void r8153b_green_en(struct r8152 *tp, bool enable)
@@ -3212,30 +3224,30 @@  static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
 
 static void r8153b_ups_en(struct r8152 *tp, bool enable)
 {
-	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	u32 ocp_data = usb_ocp_read_byte(tp, USB_POWER_CUT);
 
 	if (enable) {
 		r8153b_ups_flags(tp);
 
 		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
-		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+		usb_ocp_write_byte(tp, USB_POWER_CUT, ocp_data);
 
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+		ocp_data = usb_ocp_read_byte(tp, 0xcfff);
 		ocp_data |= BIT(0);
-		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+		usb_ocp_write_byte(tp, 0xcfff, ocp_data);
 	} else {
 		u16 data;
 
 		ocp_data &= ~(UPS_EN | USP_PREWAKE);
-		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+		usb_ocp_write_byte(tp, USB_POWER_CUT, ocp_data);
 
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+		ocp_data = usb_ocp_read_byte(tp, 0xcfff);
 		ocp_data &= ~BIT(0);
-		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+		usb_ocp_write_byte(tp, 0xcfff, ocp_data);
 
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+		ocp_data = usb_ocp_read_word(tp, USB_MISC_0);
 		ocp_data &= ~PCUT_STATUS;
-		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+		usb_ocp_write_word(tp, USB_MISC_0, ocp_data);
 
 		data = r8153_phy_status(tp, 0);
 
@@ -3266,52 +3278,52 @@  static void r8153_power_cut_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	ocp_data = usb_ocp_read_word(tp, USB_POWER_CUT);
 	if (enable)
 		ocp_data |= PWR_EN | PHASE2_EN;
 	else
 		ocp_data &= ~(PWR_EN | PHASE2_EN);
-	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+	usb_ocp_write_word(tp, USB_POWER_CUT, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	ocp_data = usb_ocp_read_word(tp, USB_MISC_0);
 	ocp_data &= ~PCUT_STATUS;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+	usb_ocp_write_word(tp, USB_MISC_0, ocp_data);
 }
 
 static void r8153b_power_cut_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	ocp_data = usb_ocp_read_word(tp, USB_POWER_CUT);
 	if (enable)
 		ocp_data |= PWR_EN | PHASE2_EN;
 	else
 		ocp_data &= ~PWR_EN;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+	usb_ocp_write_word(tp, USB_POWER_CUT, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	ocp_data = usb_ocp_read_word(tp, USB_MISC_0);
 	ocp_data &= ~PCUT_STATUS;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+	usb_ocp_write_word(tp, USB_MISC_0, ocp_data);
 }
 
 static void r8153_queue_wake(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG);
+	ocp_data = pla_ocp_read_byte(tp, PLA_INDICATE_FALG);
 	if (enable)
 		ocp_data |= UPCOMING_RUNTIME_D3;
 	else
 		ocp_data &= ~UPCOMING_RUNTIME_D3;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, ocp_data);
+	pla_ocp_write_byte(tp, PLA_INDICATE_FALG, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG);
+	ocp_data = pla_ocp_read_byte(tp, PLA_SUSPEND_FLAG);
 	ocp_data &= ~LINK_CHG_EVENT;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG, ocp_data);
+	pla_ocp_write_byte(tp, PLA_SUSPEND_FLAG, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	ocp_data = pla_ocp_read_word(tp, PLA_EXTRA_STATUS);
 	ocp_data &= ~LINK_CHANGE_FLAG;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+	pla_ocp_write_word(tp, PLA_EXTRA_STATUS, ocp_data);
 }
 
 static bool rtl_can_wakeup(struct r8152 *tp)
@@ -3328,25 +3340,25 @@  static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
 
 		__rtl_set_wol(tp, WAKE_ANY);
 
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+		pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_CONFIG);
 
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data = pla_ocp_read_word(tp, PLA_CONFIG34);
 		ocp_data |= LINK_OFF_WAKE_EN;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+		pla_ocp_write_word(tp, PLA_CONFIG34, ocp_data);
 
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+		pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_NORAML);
 	} else {
 		u32 ocp_data;
 
 		__rtl_set_wol(tp, tp->saved_wolopts);
 
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+		pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_CONFIG);
 
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data = pla_ocp_read_word(tp, PLA_CONFIG34);
 		ocp_data &= ~LINK_OFF_WAKE_EN;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+		pla_ocp_write_word(tp, PLA_CONFIG34, ocp_data);
 
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+		pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_NORAML);
 	}
 }
 
@@ -3405,10 +3417,10 @@  static void r8153_teredo_off(struct r8152 *tp)
 	case RTL_VER_05:
 	case RTL_VER_06:
 	case RTL_VER_07:
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+		ocp_data = pla_ocp_read_word(tp, PLA_TEREDO_CFG);
 		ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
 			      OOB_TEREDO_EN);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+		pla_ocp_write_word(tp, PLA_TEREDO_CFG, ocp_data);
 		break;
 
 	case RTL_VER_08:
@@ -3416,27 +3428,27 @@  static void r8153_teredo_off(struct r8152 *tp)
 		/* The bit 0 ~ 7 are relative with teredo settings. They are
 		 * W1C (write 1 to clear), so set all 1 to disable it.
 		 */
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
+		pla_ocp_write_byte(tp, PLA_TEREDO_CFG, 0xff);
 		break;
 
 	default:
 		break;
 	}
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+	pla_ocp_write_word(tp, PLA_WDT6_CTRL, WDT6_SET_MODE);
+	pla_ocp_write_word(tp, PLA_REALWOW_TIMER, 0);
+	pla_ocp_write_dword(tp, PLA_TEREDO_TIMER, 0);
 }
 
 static void rtl_reset_bmu(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+	ocp_data = usb_ocp_read_byte(tp, USB_BMU_RESET);
 	ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+	usb_ocp_write_byte(tp, USB_BMU_RESET, ocp_data);
 	ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+	usb_ocp_write_byte(tp, USB_BMU_RESET, ocp_data);
 }
 
 /* Clear the bp to stop the firmware before loading a new one */
@@ -3457,18 +3469,18 @@  static void rtl_clear_bp(struct r8152 *tp, u16 type)
 	case RTL_VER_09:
 	default:
 		if (type == MCU_TYPE_USB) {
-			ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
-			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
+			usb_ocp_write_byte(tp, USB_BP2_EN, 0);
+
+			usb_ocp_write_word(tp, USB_BP_8, 0);
+			usb_ocp_write_word(tp, USB_BP_9, 0);
+			usb_ocp_write_word(tp, USB_BP_10, 0);
+			usb_ocp_write_word(tp, USB_BP_11, 0);
+			usb_ocp_write_word(tp, USB_BP_12, 0);
+			usb_ocp_write_word(tp, USB_BP_13, 0);
+			usb_ocp_write_word(tp, USB_BP_14, 0);
+			usb_ocp_write_word(tp, USB_BP_15, 0);
 		} else {
-			ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+			pla_ocp_write_byte(tp, PLA_BP_EN, 0);
 		}
 		break;
 	}
@@ -3541,7 +3553,7 @@  static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)
 
 	r8153_patch_request(tp, false);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+	pla_ocp_write_word(tp, PLA_OCP_GPHY_BASE, tp->ocp_base);
 
 	return 0;
 }
@@ -3987,9 +3999,9 @@  static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
 	 * break points and before applying the PLA firmware.
 	 */
 	if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
-	    !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
+	    !(pla_ocp_read_word(tp, PLA_MACDBG_POST) & DEBUG_OE)) {
+		pla_ocp_write_word(tp, PLA_MACDBG_PRE, DEBUG_LTSSM);
+		pla_ocp_write_word(tp, PLA_MACDBG_POST, DEBUG_LTSSM);
 	}
 
 	length = __le32_to_cpu(mac->blk_hdr.length);
@@ -4018,8 +4030,7 @@  static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
 
 	fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
 	if (fw_ver_reg)
-		ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
-			       mac->fw_ver_data);
+		usb_ocp_write_byte(tp, fw_ver_reg, mac->fw_ver_data);
 
 	dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
 }
@@ -4163,7 +4174,7 @@  static void r8152_eee_en(struct r8152 *tp, bool enable)
 	u16 config1, config2, config3;
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data = pla_ocp_read_word(tp, PLA_EEE_CR);
 	config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
 	config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
 	config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
@@ -4183,7 +4194,7 @@  static void r8152_eee_en(struct r8152 *tp, bool enable)
 		config3 |= fast_snr(511);
 	}
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	pla_ocp_write_word(tp, PLA_EEE_CR, ocp_data);
 	ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
 	ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
 	ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
@@ -4194,7 +4205,7 @@  static void r8153_eee_en(struct r8152 *tp, bool enable)
 	u32 ocp_data;
 	u16 config;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data = pla_ocp_read_word(tp, PLA_EEE_CR);
 	config = ocp_reg_read(tp, OCP_EEE_CFG);
 
 	if (enable) {
@@ -4205,7 +4216,7 @@  static void r8153_eee_en(struct r8152 *tp, bool enable)
 		config &= ~EEE10_EN;
 	}
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	pla_ocp_write_word(tp, PLA_EEE_CR, ocp_data);
 	ocp_reg_write(tp, OCP_EEE_CFG, config);
 
 	tp->ups_info.eee = enable;
@@ -4279,7 +4290,7 @@  static void wait_oob_link_list_ready(struct r8152 *tp)
 	int i;
 
 	for (i = 0; i < 1000; i++) {
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 		if (ocp_data & LINK_LIST_READY)
 			break;
 		usleep_range(1000, 2000);
@@ -4290,107 +4301,103 @@  static void r8152b_exit_oob(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 
 	rxdy_gated_en(tp, true);
 	r8153_teredo_off(tp);
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
+	pla_ocp_write_byte(tp, PLA_CRWECR, CRWECR_NORAML);
+	pla_ocp_write_byte(tp, PLA_CR, 0x00);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data &= ~MCU_BORW_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data |= RE_INIT_LL;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
 	rtl8152_nic_reset(tp);
 
 	/* rx share fifo credit full threshold */
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+	pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
 
 	if (tp->udev->speed == USB_SPEED_FULL ||
 	    tp->udev->speed == USB_SPEED_LOW) {
 		/* rx share fifo credit near full threshold */
-		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
-				RXFIFO_THR2_FULL);
-		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
-				RXFIFO_THR3_FULL);
+		pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL1, RXFIFO_THR2_FULL);
+		pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL2, RXFIFO_THR3_FULL);
 	} else {
 		/* rx share fifo credit near full threshold */
-		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
-				RXFIFO_THR2_HIGH);
-		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
-				RXFIFO_THR3_HIGH);
+		pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL1, RXFIFO_THR2_HIGH);
+		pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL2, RXFIFO_THR3_HIGH);
 	}
 
 	/* TX share fifo free credit full threshold */
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
+	pla_ocp_write_dword(tp, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
 
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
-			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
+	usb_ocp_write_byte(tp, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+	usb_ocp_write_dword(tp, USB_RX_BUF_TH, RX_THR_HIGH);
+	usb_ocp_write_dword(tp, USB_TX_DMA,
+			    TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
 
 	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+	pla_ocp_write_word(tp, PLA_RMS, RTL8152_RMS);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data = pla_ocp_read_word(tp, PLA_TCR0);
 	ocp_data |= TCR0_AUTO_FIFO;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+	pla_ocp_write_word(tp, PLA_TCR0, ocp_data);
 }
 
 static void r8152b_enter_oob(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+	pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
 
 	rtl_disable(tp);
 
 	wait_oob_link_list_ready(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data |= RE_INIT_LL;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+	pla_ocp_write_word(tp, PLA_RMS, RTL8152_RMS);
 
 	rtl_rx_vlan_en(tp, true);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
+	ocp_data = pla_ocp_read_word(tp, PLA_BDC_CR);
 	ocp_data |= ALDPS_PROXY_MODE;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+	pla_ocp_write_word(tp, PLA_BDC_CR, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
 	rxdy_gated_en(tp, false);
 
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 }
 
 static int r8153_pre_firmware_1(struct r8152 *tp)
@@ -4399,7 +4406,7 @@  static int r8153_pre_firmware_1(struct r8152 *tp)
 
 	/* Wait till the WTD timer is ready. It would take at most 104 ms. */
 	for (i = 0; i < 104; i++) {
-		u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
+		u32 ocp_data = usb_ocp_read_byte(tp, USB_WDT1_CTRL);
 
 		if (!(ocp_data & WTD1_EN))
 			break;
@@ -4412,11 +4419,11 @@  static int r8153_pre_firmware_1(struct r8152 *tp)
 static int r8153_post_firmware_1(struct r8152 *tp)
 {
 	/* set USB_BP_4 to support USB_SPEED_SUPER only */
-	if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
-		ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
+	if (usb_ocp_read_byte(tp, USB_CSTMR) & FORCE_SUPER)
+		usb_ocp_write_word(tp, USB_BP_4, BP4_SUPER_ONLY);
 
 	/* reset UPHY timer to 36 ms */
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+	pla_ocp_write_word(tp, PLA_UPHY_TIMER, 36000 / 16);
 
 	return 0;
 }
@@ -4427,9 +4434,9 @@  static int r8153_pre_firmware_2(struct r8152 *tp)
 
 	r8153_pre_firmware_1(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_FIX_EN0);
 	ocp_data &= ~FW_FIX_SUSPEND;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_FIX_EN0, ocp_data);
 
 	return 0;
 }
@@ -4439,25 +4446,25 @@  static int r8153_post_firmware_2(struct r8152 *tp)
 	u32 ocp_data;
 
 	/* enable bp0 if support USB_SPEED_SUPER only */
-	if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+	if (usb_ocp_read_byte(tp, USB_CSTMR) & FORCE_SUPER) {
+		ocp_data = pla_ocp_read_word(tp, PLA_BP_EN);
 		ocp_data |= BIT(0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+		pla_ocp_write_word(tp, PLA_BP_EN, ocp_data);
 	}
 
 	/* reset UPHY timer to 36 ms */
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+	pla_ocp_write_word(tp, PLA_UPHY_TIMER, 36000 / 16);
 
 	/* enable U3P3 check, set the counter to 4 */
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
+	pla_ocp_write_word(tp, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_FIX_EN0);
 	ocp_data |= FW_FIX_SUSPEND;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_FIX_EN0, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+	ocp_data = usb_ocp_read_byte(tp, USB_USB2PHY);
 	ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+	usb_ocp_write_byte(tp, USB_USB2PHY, ocp_data);
 
 	return 0;
 }
@@ -4466,13 +4473,13 @@  static int r8153_post_firmware_3(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+	ocp_data = usb_ocp_read_byte(tp, USB_USB2PHY);
 	ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+	usb_ocp_write_byte(tp, USB_USB2PHY, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_FIX_EN1);
 	ocp_data |= FW_IP_RESET_EN;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_FIX_EN1, ocp_data);
 
 	return 0;
 }
@@ -4480,8 +4487,7 @@  static int r8153_post_firmware_3(struct r8152 *tp)
 static int r8153b_pre_firmware_1(struct r8152 *tp)
 {
 	/* enable fc timer and set timer to 1 second. */
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
-		       CTRL_TIMER_EN | (1000 / 8));
+	usb_ocp_write_word(tp, USB_FC_TIMER, CTRL_TIMER_EN | (1000 / 8));
 
 	return 0;
 }
@@ -4491,24 +4497,24 @@  static int r8153b_post_firmware_1(struct r8152 *tp)
 	u32 ocp_data;
 
 	/* enable bp0 for RTL8153-BND */
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+	ocp_data = usb_ocp_read_byte(tp, USB_MISC_1);
 	if (ocp_data & BND_MASK) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+		ocp_data = pla_ocp_read_word(tp, PLA_BP_EN);
 		ocp_data |= BIT(0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+		pla_ocp_write_word(tp, PLA_BP_EN, ocp_data);
 	}
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_CTRL);
 	ocp_data |= FLOW_CTRL_PATCH_OPT;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_TASK);
 	ocp_data |= FC_PATCH_TASK;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_TASK, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+	ocp_data = usb_ocp_read_word(tp, USB_FW_FIX_EN1);
 	ocp_data |= FW_IP_RESET_EN;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+	usb_ocp_write_word(tp, USB_FW_FIX_EN1, ocp_data);
 
 	return 0;
 }
@@ -4528,7 +4534,7 @@  static void r8153_aldps_en(struct r8152 *tp, bool enable)
 		ocp_reg_write(tp, OCP_POWER_CFG, data);
 		for (i = 0; i < 20; i++) {
 			usleep_range(1000, 2000);
-			if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100)
+			if (pla_ocp_read_word(tp, 0xe000) & 0x0100)
 				break;
 		}
 	}
@@ -4567,9 +4573,9 @@  static void r8153_hw_phy_cfg(struct r8152 *tp)
 	ocp_reg_write(tp, OCP_POWER_CFG, data);
 	sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data = pla_ocp_read_word(tp, PLA_PHY_PWR);
 	ocp_data |= PFM_PWM_SWITCH;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	pla_ocp_write_word(tp, PLA_PHY_PWR, ocp_data);
 
 	/* Enable LPF corner auto tune */
 	sram_write(tp, SRAM_LPF_CFG, 0xf70f);
@@ -4602,10 +4608,10 @@  static u32 r8152_efuse_read(struct r8152 *tp, u8 addr)
 {
 	u32 ocp_data;
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr);
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD);
+	pla_ocp_write_word(tp, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr);
+	ocp_data = pla_ocp_read_word(tp, PLA_EFUSE_CMD);
 	ocp_data = (ocp_data & EFUSE_DATA_BIT16) << 9;	/* data of bit16 */
-	ocp_data |= ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_DATA);
+	ocp_data |= pla_ocp_read_word(tp, PLA_EFUSE_DATA);
 
 	return ocp_data;
 }
@@ -4652,14 +4658,14 @@  static void r8153b_hw_phy_cfg(struct r8152 *tp)
 		u32 swr_cnt_1ms_ini;
 
 		swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK;
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG);
+		ocp_data = usb_ocp_read_word(tp, USB_UPS_CFG);
 		ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini;
-		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data);
+		usb_ocp_write_word(tp, USB_UPS_CFG, ocp_data);
 	}
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data = pla_ocp_read_word(tp, PLA_PHY_PWR);
 	ocp_data |= PFM_PWM_SWITCH;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	pla_ocp_write_word(tp, PLA_PHY_PWR, ocp_data);
 
 	/* Advnace EEE */
 	if (!r8153_patch_request(tp, true)) {
@@ -4699,47 +4705,47 @@  static void r8153_first_init(struct r8152 *tp)
 	rxdy_gated_en(tp, true);
 	r8153_teredo_off(tp);
 
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 
 	rtl8152_nic_reset(tp);
 	rtl_reset_bmu(tp);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data &= ~MCU_BORW_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data |= RE_INIT_LL;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
 	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
 
 	ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
+	pla_ocp_write_word(tp, PLA_RMS, ocp_data);
+	pla_ocp_write_byte(tp, PLA_MTPS, MTPS_JUMBO);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data = pla_ocp_read_word(tp, PLA_TCR0);
 	ocp_data |= TCR0_AUTO_FIFO;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+	pla_ocp_write_word(tp, PLA_TCR0, ocp_data);
 
 	rtl8152_nic_reset(tp);
 
 	/* rx share fifo credit full threshold */
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
+	pla_ocp_write_dword(tp, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+	pla_ocp_write_word(tp, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
+	pla_ocp_write_word(tp, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
 	/* TX share fifo free credit full threshold */
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+	pla_ocp_write_dword(tp, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
 }
 
 static void r8153_enter_oob(struct r8152 *tp)
@@ -4748,32 +4754,32 @@  static void r8153_enter_oob(struct r8152 *tp)
 
 	r8153_mac_clk_spd(tp, true);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
 	rtl_disable(tp);
 	rtl_reset_bmu(tp);
 
 	wait_oob_link_list_ready(tp);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data = pla_ocp_read_word(tp, PLA_SFF_STS_7);
 	ocp_data |= RE_INIT_LL;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+	pla_ocp_write_word(tp, PLA_SFF_STS_7, ocp_data);
 
 	wait_oob_link_list_ready(tp);
 
 	ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
+	pla_ocp_write_word(tp, PLA_RMS, ocp_data);
 
 	switch (tp->version) {
 	case RTL_VER_03:
 	case RTL_VER_04:
 	case RTL_VER_05:
 	case RTL_VER_06:
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+		ocp_data = pla_ocp_read_word(tp, PLA_TEREDO_CFG);
 		ocp_data &= ~TEREDO_WAKE_MASK;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+		pla_ocp_write_word(tp, PLA_TEREDO_CFG, ocp_data);
 		break;
 
 	case RTL_VER_08:
@@ -4782,7 +4788,7 @@  static void r8153_enter_oob(struct r8152 *tp)
 		 * type. Set it to zero. bits[7:0] are the W1C bits about
 		 * the events. Set them to all 1 to clear them.
 		 */
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
+		pla_ocp_write_word(tp, PLA_TEREDO_WAKE_BASE, 0x00ff);
 		break;
 
 	default:
@@ -4791,19 +4797,19 @@  static void r8153_enter_oob(struct r8152 *tp)
 
 	rtl_rx_vlan_en(tp, true);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
+	ocp_data = pla_ocp_read_word(tp, PLA_BDC_CR);
 	ocp_data |= ALDPS_PROXY_MODE;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+	pla_ocp_write_word(tp, PLA_BDC_CR, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+	pla_ocp_write_byte(tp, PLA_OOB_CTRL, ocp_data);
 
 	rxdy_gated_en(tp, false);
 
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data = pla_ocp_read_dword(tp, PLA_RCR);
 	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 }
 
 static void rtl8153_disable(struct r8152 *tp)
@@ -4975,17 +4981,17 @@  static void rtl8153_up(struct r8152 *tp)
 	r8153_aldps_en(tp, false);
 	r8153_first_init(tp);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data = pla_ocp_read_byte(tp, PLA_CONFIG6);
 	ocp_data |= LANWAKE_CLR_EN;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+	pla_ocp_write_byte(tp, PLA_CONFIG6, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+	ocp_data = pla_ocp_read_byte(tp, PLA_LWAKE_CTRL_REG);
 	ocp_data &= ~LANWAKE_PIN;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+	pla_ocp_write_byte(tp, PLA_LWAKE_CTRL_REG, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
+	ocp_data = usb_ocp_read_word(tp, USB_SSPHYLINK1);
 	ocp_data &= ~DELAY_PHY_PWR_CHG;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
+	usb_ocp_write_word(tp, USB_SSPHYLINK1, ocp_data);
 
 	r8153_aldps_en(tp, true);
 
@@ -5012,9 +5018,9 @@  static void rtl8153_down(struct r8152 *tp)
 		return;
 	}
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data = pla_ocp_read_byte(tp, PLA_CONFIG6);
 	ocp_data &= ~LANWAKE_CLR_EN;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+	pla_ocp_write_byte(tp, PLA_CONFIG6, ocp_data);
 
 	r8153_u1u2en(tp, false);
 	r8153_u2p3en(tp, false);
@@ -5036,11 +5042,11 @@  static void rtl8153b_up(struct r8152 *tp)
 	r8153_aldps_en(tp, false);
 
 	r8153_first_init(tp);
-	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
+	usb_ocp_write_dword(tp, USB_RX_BUF_TH, RX_THR_B);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data = pla_ocp_read_word(tp, PLA_MAC_PWR_CTRL3);
 	ocp_data &= ~PLA_MCU_SPDWN_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+	pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL3, ocp_data);
 
 	r8153_aldps_en(tp, true);
 
@@ -5057,9 +5063,9 @@  static void rtl8153b_down(struct r8152 *tp)
 		return;
 	}
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data = pla_ocp_read_word(tp, PLA_MAC_PWR_CTRL3);
 	ocp_data |= PLA_MCU_SPDWN_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+	pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL3, ocp_data);
 
 	r8153b_u1u2en(tp, false);
 	r8153_u2p3en(tp, false);
@@ -5073,10 +5079,10 @@  static bool rtl8152_in_nway(struct r8152 *tp)
 {
 	u16 nway_state;
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000);
+	pla_ocp_write_word(tp, PLA_OCP_GPHY_BASE, 0x2000);
 	tp->ocp_base = 0x2000;
-	ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c);		/* phy state */
-	nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a);
+	pla_ocp_write_byte(tp, 0xb014, 0x4c);		/* phy state */
+	nway_state = pla_ocp_read_word(tp, 0xb01a);
 
 	/* bit 15: TXDIS_STATE, bit 14: ABD_STATE */
 	if (nway_state & 0xc000)
@@ -5323,9 +5329,9 @@  static void rtl_tally_reset(struct r8152 *tp)
 {
 	u32 ocp_data;
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
+	ocp_data = pla_ocp_read_word(tp, PLA_RSTTALLY);
 	ocp_data |= TALLY_RESET;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+	pla_ocp_write_word(tp, PLA_RSTTALLY, ocp_data);
 }
 
 static void r8152b_init(struct r8152 *tp)
@@ -5345,30 +5351,30 @@  static void r8152b_init(struct r8152 *tp)
 	r8152_aldps_en(tp, false);
 
 	if (tp->version == RTL_VER_01) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+		ocp_data = pla_ocp_read_word(tp, PLA_LED_FEATURE);
 		ocp_data &= ~LED_MODE_MASK;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+		pla_ocp_write_word(tp, PLA_LED_FEATURE, ocp_data);
 	}
 
 	r8152_power_cut_en(tp, false);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data = pla_ocp_read_word(tp, PLA_PHY_PWR);
 	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
+	pla_ocp_write_word(tp, PLA_PHY_PWR, ocp_data);
+	ocp_data = pla_ocp_read_dword(tp, PLA_MAC_PWR_CTRL);
 	ocp_data &= ~MCU_CLK_RATIO_MASK;
 	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
-	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+	pla_ocp_write_dword(tp, PLA_MAC_PWR_CTRL, ocp_data);
 	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
 		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
+	pla_ocp_write_word(tp, PLA_GPHY_INTR_IMR, ocp_data);
 
 	rtl_tally_reset(tp);
 
 	/* enable rx aggregation */
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_USB_CTRL);
 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_USB_CTRL, ocp_data);
 }
 
 static void r8153_init(struct r8152 *tp)
@@ -5383,8 +5389,7 @@  static void r8153_init(struct r8152 *tp)
 	r8153_u1u2en(tp, false);
 
 	for (i = 0; i < 500; i++) {
-		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-		    AUTOLOAD_DONE)
+		if (pla_ocp_read_word(tp, PLA_BOOT_CTRL) & AUTOLOAD_DONE)
 			break;
 
 		msleep(20);
@@ -5409,69 +5414,69 @@  static void r8153_init(struct r8152 *tp)
 	r8153_u2p3en(tp, false);
 
 	if (tp->version == RTL_VER_04) {
-		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2);
+		ocp_data = usb_ocp_read_word(tp, USB_SSPHYLINK2);
 		ocp_data &= ~pwd_dn_scale_mask;
 		ocp_data |= pwd_dn_scale(96);
-		ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data);
+		usb_ocp_write_word(tp, USB_SSPHYLINK2, ocp_data);
 
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+		ocp_data = usb_ocp_read_byte(tp, USB_USB2PHY);
 		ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
-		ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+		usb_ocp_write_byte(tp, USB_USB2PHY, ocp_data);
 	} else if (tp->version == RTL_VER_05) {
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0);
+		ocp_data = pla_ocp_read_byte(tp, PLA_DMY_REG0);
 		ocp_data &= ~ECM_ALDPS;
-		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data);
+		pla_ocp_write_byte(tp, PLA_DMY_REG0, ocp_data);
 
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
-		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
+		ocp_data = usb_ocp_read_byte(tp, USB_CSR_DUMMY1);
+		if (usb_ocp_read_word(tp, USB_BURST_SIZE) == 0)
 			ocp_data &= ~DYNAMIC_BURST;
 		else
 			ocp_data |= DYNAMIC_BURST;
-		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+		usb_ocp_write_byte(tp, USB_CSR_DUMMY1, ocp_data);
 	} else if (tp->version == RTL_VER_06) {
-		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
-		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
+		ocp_data = usb_ocp_read_byte(tp, USB_CSR_DUMMY1);
+		if (usb_ocp_read_word(tp, USB_BURST_SIZE) == 0)
 			ocp_data &= ~DYNAMIC_BURST;
 		else
 			ocp_data |= DYNAMIC_BURST;
-		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+		usb_ocp_write_byte(tp, USB_CSR_DUMMY1, ocp_data);
 
 		r8153_queue_wake(tp, false);
 
-		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+		ocp_data = pla_ocp_read_word(tp, PLA_EXTRA_STATUS);
 		if (rtl8152_get_speed(tp) & LINK_STATUS)
 			ocp_data |= CUR_LINK_OK;
 		else
 			ocp_data &= ~CUR_LINK_OK;
 		ocp_data |= POLL_LINK_CHG;
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+		pla_ocp_write_word(tp, PLA_EXTRA_STATUS, ocp_data);
 	}
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
+	ocp_data = usb_ocp_read_byte(tp, USB_CSR_DUMMY2);
 	ocp_data |= EP4_FULL_FC;
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data);
+	usb_ocp_write_byte(tp, USB_CSR_DUMMY2, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_WDT11_CTRL);
 	ocp_data &= ~TIMER11_EN;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_WDT11_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+	ocp_data = pla_ocp_read_word(tp, PLA_LED_FEATURE);
 	ocp_data &= ~LED_MODE_MASK;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+	pla_ocp_write_word(tp, PLA_LED_FEATURE, ocp_data);
 
 	ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM;
 	if (tp->version == RTL_VER_04 && tp->udev->speed < USB_SPEED_SUPER)
 		ocp_data |= LPM_TIMER_500MS;
 	else
 		ocp_data |= LPM_TIMER_500US;
-	ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
+	usb_ocp_write_byte(tp, USB_LPM_CTRL, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
+	ocp_data = usb_ocp_read_word(tp, USB_AFE_CTRL2);
 	ocp_data &= ~SEN_VAL_MASK;
 	ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
-	ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
+	usb_ocp_write_word(tp, USB_AFE_CTRL2, ocp_data);
 
-	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
+	usb_ocp_write_word(tp, USB_CONNECT_TIMER, 0x0001);
 
 	r8153_power_cut_en(tp, false);
 	rtl_runtime_suspend_enable(tp, false);
@@ -5479,21 +5484,21 @@  static void r8153_init(struct r8152 *tp)
 	r8153_mac_clk_spd(tp, false);
 	usb_enable_lpm(tp->udev);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data = pla_ocp_read_byte(tp, PLA_CONFIG6);
 	ocp_data |= LANWAKE_CLR_EN;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+	pla_ocp_write_byte(tp, PLA_CONFIG6, ocp_data);
 
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+	ocp_data = pla_ocp_read_byte(tp, PLA_LWAKE_CTRL_REG);
 	ocp_data &= ~LANWAKE_PIN;
-	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+	pla_ocp_write_byte(tp, PLA_LWAKE_CTRL_REG, ocp_data);
 
 	/* rx aggregation */
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_USB_CTRL);
 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
 	if (test_bit(DELL_TB_RX_AGG_BUG, &tp->flags))
 		ocp_data |= RX_AGG_DISABLE;
 
-	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_USB_CTRL, ocp_data);
 
 	rtl_tally_reset(tp);
 
@@ -5523,8 +5528,7 @@  static void r8153b_init(struct r8152 *tp)
 	r8153b_u1u2en(tp, false);
 
 	for (i = 0; i < 500; i++) {
-		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-		    AUTOLOAD_DONE)
+		if (pla_ocp_read_word(tp, PLA_BOOT_CTRL) & AUTOLOAD_DONE)
 			break;
 
 		msleep(20);
@@ -5545,52 +5549,52 @@  static void r8153b_init(struct r8152 *tp)
 	r8153_u2p3en(tp, false);
 
 	/* MSC timer = 0xfff * 8ms = 32760 ms */
-	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+	usb_ocp_write_word(tp, USB_MSC_TIMER, 0x0fff);
 
 	/* U1/U2/L1 idle timer. 500 us */
-	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+	usb_ocp_write_word(tp, USB_U1U2_TIMER, 500);
 
 	r8153b_power_cut_en(tp, false);
 	r8153b_ups_en(tp, false);
 	r8153_queue_wake(tp, false);
 	rtl_runtime_suspend_enable(tp, false);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	ocp_data = pla_ocp_read_word(tp, PLA_EXTRA_STATUS);
 	if (rtl8152_get_speed(tp) & LINK_STATUS)
 		ocp_data |= CUR_LINK_OK;
 	else
 		ocp_data &= ~CUR_LINK_OK;
 	ocp_data |= POLL_LINK_CHG;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+	pla_ocp_write_word(tp, PLA_EXTRA_STATUS, ocp_data);
 
 	if (tp->udev->speed != USB_SPEED_HIGH)
 		r8153b_u1u2en(tp, true);
 	usb_enable_lpm(tp->udev);
 
 	/* MAC clock speed down */
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+	ocp_data = pla_ocp_read_word(tp, PLA_MAC_PWR_CTRL2);
 	ocp_data |= MAC_CLK_SPDWN_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+	pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL2, ocp_data);
 
-	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data = pla_ocp_read_word(tp, PLA_MAC_PWR_CTRL3);
 	ocp_data &= ~PLA_MCU_SPDWN_EN;
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+	pla_ocp_write_word(tp, PLA_MAC_PWR_CTRL3, ocp_data);
 
 	if (tp->version == RTL_VER_09) {
 		/* Disable Test IO for 32QFN */
-		if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) {
-			ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+		if (pla_ocp_read_byte(tp, 0xdc00) & BIT(5)) {
+			ocp_data = pla_ocp_read_word(tp, PLA_PHY_PWR);
 			ocp_data |= TEST_IO_OFF;
-			ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+			pla_ocp_write_word(tp, PLA_PHY_PWR, ocp_data);
 		}
 	}
 
 	set_bit(GREEN_ETHERNET, &tp->flags);
 
 	/* rx aggregation */
-	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data = usb_ocp_read_word(tp, USB_USB_CTRL);
 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+	usb_ocp_write_word(tp, USB_USB_CTRL, ocp_data);
 
 	rtl_tally_reset(tp);
 
@@ -5756,15 +5760,14 @@  static int rtl8152_runtime_suspend(struct r8152 *tp)
 		if (netif_carrier_ok(netdev)) {
 			u32 ocp_data;
 
-			rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+			rcr = pla_ocp_read_dword(tp, PLA_RCR);
 			ocp_data = rcr & ~RCR_ACPT_ALL;
-			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+			pla_ocp_write_dword(tp, PLA_RCR, ocp_data);
 			rxdy_gated_en(tp, true);
-			ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA,
-						 PLA_OOB_CTRL);
+			ocp_data = pla_ocp_read_byte(tp, PLA_OOB_CTRL);
 			if (!(ocp_data & RXFIFO_EMPTY)) {
 				rxdy_gated_en(tp, false);
-				ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+				pla_ocp_write_dword(tp, PLA_RCR, rcr);
 				clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 				smp_mb__after_atomic();
 				ret = -EBUSY;
@@ -5783,7 +5786,7 @@  static int rtl8152_runtime_suspend(struct r8152 *tp)
 			napi_disable(napi);
 			rtl_stop_rx(tp);
 			rxdy_gated_en(tp, false);
-			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+			pla_ocp_write_dword(tp, PLA_RCR, rcr);
 			napi_enable(napi);
 		}
 
@@ -6450,7 +6453,7 @@  static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
 	if (netif_running(dev)) {
 		u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms);
+		pla_ocp_write_word(tp, PLA_RMS, rms);
 
 		if (netif_carrier_ok(dev))
 			r8153_set_rx_early_size(tp);