diff mbox series

[GIT,PULL] SCSI fixes for 5.10-rc2

Message ID 8a60c7bd72f908a637f0f9e60cce7ab3a047e343.camel@HansenPartnership.com (mailing list archive)
State Not Applicable
Headers show
Series [GIT,PULL] SCSI fixes for 5.10-rc2 | expand

Commit Message

James Bottomley Nov. 6, 2020, 10:26 p.m. UTC
Three driver fixes.  Two (alua and hpsa) are in hard to trigger
attach/detach situations but the mp3sas one involves a polled to
interrupt switch over that could trigger in any high IOPS situation.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Hannes Reinecke (1):
      scsi: scsi_dh_alua: Avoid crash during alua_bus_detach()

Keita Suzuki (1):
      scsi: hpsa: Fix memory leak in hpsa_init_one()

Sreekanth Reddy (1):
      scsi: mpt3sas: Fix timeouts observed while reenabling IRQ

And the diffstat:

 drivers/scsi/device_handler/scsi_dh_alua.c | 9 +++++----
 drivers/scsi/hpsa.c                        | 4 +++-
 drivers/scsi/mpt3sas/mpt3sas_base.c        | 7 +++++++
 3 files changed, 15 insertions(+), 5 deletions(-)

With full diff below.

James

---

Comments

pr-tracker-bot@kernel.org Nov. 6, 2020, 11:37 p.m. UTC | #1
The pull request you sent on Fri, 06 Nov 2020 14:26:05 -0800:

> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/d4fc96832f0131c8f2fb067fb01c3007df6d4c9f

Thank you!
diff mbox series

Patch

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index f32da0ca529e..308bda2e9c00 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -658,8 +658,8 @@  static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 					rcu_read_lock();
 					list_for_each_entry_rcu(h,
 						&tmp_pg->dh_list, node) {
-						/* h->sdev should always be valid */
-						BUG_ON(!h->sdev);
+						if (!h->sdev)
+							continue;
 						h->sdev->access_state = desc[0];
 					}
 					rcu_read_unlock();
@@ -705,7 +705,8 @@  static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 			pg->expiry = 0;
 			rcu_read_lock();
 			list_for_each_entry_rcu(h, &pg->dh_list, node) {
-				BUG_ON(!h->sdev);
+				if (!h->sdev)
+					continue;
 				h->sdev->access_state =
 					(pg->state & SCSI_ACCESS_STATE_MASK);
 				if (pg->pref)
@@ -1147,7 +1148,6 @@  static void alua_bus_detach(struct scsi_device *sdev)
 	spin_lock(&h->pg_lock);
 	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
 	rcu_assign_pointer(h->pg, NULL);
-	h->sdev = NULL;
 	spin_unlock(&h->pg_lock);
 	if (pg) {
 		spin_lock_irq(&pg->lock);
@@ -1156,6 +1156,7 @@  static void alua_bus_detach(struct scsi_device *sdev)
 		kref_put(&pg->kref, release_port_group);
 	}
 	sdev->handler_data = NULL;
+	synchronize_rcu();
 	kfree(h);
 }
 
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 83ce4f11a589..8df70c92911d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8855,7 +8855,7 @@  static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* hook into SCSI subsystem */
 	rc = hpsa_scsi_add_host(h);
 	if (rc)
-		goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
+		goto clean8; /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */
 
 	/* Monitor the controller for firmware lockups */
 	h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
@@ -8870,6 +8870,8 @@  static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				HPSA_EVENT_MONITOR_INTERVAL);
 	return 0;
 
+clean8: /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */
+	kfree(h->lastlogicals);
 clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
 	hpsa_free_performant_mode(h);
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 93230cd1982f..e4cc92bc4d94 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1740,6 +1740,13 @@  _base_irqpoll(struct irq_poll *irqpoll, int budget)
 		reply_q->irq_poll_scheduled = false;
 		reply_q->irq_line_enable = true;
 		enable_irq(reply_q->os_irq);
+		/*
+		 * Go for one more round of processing the
+		 * reply descriptor post queue incase if HBA
+		 * Firmware has posted some reply descriptors
+		 * while reenabling the IRQ.
+		 */
+		_base_process_reply_queue(reply_q);
 	}
 
 	return num_entries;