| Message ID | 20201118203013.5077-2-ceggers@arri.de (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: dsa: microchip: PTP support for KSZ956x | expand |
| Context | Check | Description |
|---|---|---|
| netdev/apply | fail | Patch does not apply to net-next |
| netdev/tree_selection | success | Clearly marked for net-next |
On Wed, 18 Nov 2020 21:30:02 +0100, Christian Eggers wrote: > Convert the bindings document for Microchip KSZ Series Ethernet switches > from txt to yaml. > > Signed-off-by: Christian Eggers <ceggers@arri.de> > --- > .../devicetree/bindings/net/dsa/ksz.txt | 125 -------------- > .../bindings/net/dsa/microchip,ksz.yaml | 152 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 153 insertions(+), 126 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt > create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@0: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@1: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml See https://patchwork.ozlabs.org/patch/1402525 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Wed, Nov 18, 2020 at 09:30:02PM +0100, Christian Eggers wrote: > Convert the bindings document for Microchip KSZ Series Ethernet switches > from txt to yaml. > > Signed-off-by: Christian Eggers <ceggers@arri.de> > --- > .../devicetree/bindings/net/dsa/ksz.txt | 125 -------------- > .../bindings/net/dsa/microchip,ksz.yaml | 152 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 153 insertions(+), 126 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt > create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt > deleted file mode 100644 > index 95e91e84151c..000000000000 > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt > +++ /dev/null > @@ -1,125 +0,0 @@ > -Microchip KSZ Series Ethernet switches > -================================== > - > -Required properties: > - > -- compatible: For external switch chips, compatible string must be exactly one > - of the following: > - - "microchip,ksz8765" > - - "microchip,ksz8794" > - - "microchip,ksz8795" > - - "microchip,ksz9477" > - - "microchip,ksz9897" > - - "microchip,ksz9896" > - - "microchip,ksz9567" > - - "microchip,ksz8565" > - - "microchip,ksz9893" > - - "microchip,ksz9563" > - - "microchip,ksz8563" > - > -Optional properties: > - > -- reset-gpios : Should be a gpio specifier for a reset line > -- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to > - 125MHz instead of 25MHz. > - > -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional > -required and optional properties. > - > -Examples: > - > -Ethernet switch connected via SPI to the host, CPU port wired to eth0: > - > - eth0: ethernet@10001000 { > - fixed-link { > - speed = <1000>; > - full-duplex; > - }; > - }; > - > - spi1: spi@f8008000 { > - pinctrl-0 = <&pinctrl_spi_ksz>; > - cs-gpios = <&pioC 25 0>; > - id = <1>; > - > - ksz9477: ksz9477@0 { > - compatible = "microchip,ksz9477"; > - reg = <0>; > - > - spi-max-frequency = <44000000>; > - spi-cpha; > - spi-cpol; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - port@0 { > - reg = <0>; > - label = "lan1"; > - }; > - port@1 { > - reg = <1>; > - label = "lan2"; > - }; > - port@2 { > - reg = <2>; > - label = "lan3"; > - }; > - port@3 { > - reg = <3>; > - label = "lan4"; > - }; > - port@4 { > - reg = <4>; > - label = "lan5"; > - }; > - port@5 { > - reg = <5>; > - label = "cpu"; > - ethernet = <ð0>; > - fixed-link { > - speed = <1000>; > - full-duplex; > - }; > - }; > - }; > - }; > - ksz8565: ksz8565@0 { > - compatible = "microchip,ksz8565"; > - reg = <0>; > - > - spi-max-frequency = <44000000>; > - spi-cpha; > - spi-cpol; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - port@0 { > - reg = <0>; > - label = "lan1"; > - }; > - port@1 { > - reg = <1>; > - label = "lan2"; > - }; > - port@2 { > - reg = <2>; > - label = "lan3"; > - }; > - port@3 { > - reg = <3>; > - label = "lan4"; > - }; > - port@6 { > - reg = <6>; > - label = "cpu"; > - ethernet = <ð0>; > - fixed-link { > - speed = <1000>; > - full-duplex; > - }; > - }; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > new file mode 100644 > index 000000000000..010adb09a68f > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > @@ -0,0 +1,152 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip KSZ Series Ethernet switches > + > +allOf: > + - $ref: dsa.yaml# Move this after 'maintainers'. > + > +maintainers: > + - Marek Vasut <marex@denx.de> > + - Woojung Huh <Woojung.Huh@microchip.com> > + > +properties: > + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional > + # required and optional properties. > + compatible: > + enum: > + - microchip,ksz8765 > + - microchip,ksz8794 > + - microchip,ksz8795 > + - microchip,ksz9477 > + - microchip,ksz9897 > + - microchip,ksz9896 > + - microchip,ksz9567 > + - microchip,ksz8565 > + - microchip,ksz9893 > + - microchip,ksz9563 > + - microchip,ksz8563 > + > + reset-gpios: > + description: > + Should be a gpio specifier for a reset line. > + maxItems: 1 > + > + microchip,synclko-125: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false You need to use unevaluatedProperties instead. > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + // Ethernet switch connected via SPI to the host, CPU port wired to eth0: > + eth0 { > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + spi0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pinctrl-0 = <&pinctrl_spi_ksz>; > + cs-gpios = <&pioC 25 0>; > + id = <1>; > + > + ksz9477: switch@0 { > + compatible = "microchip,ksz9477"; > + reg = <0>; > + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > + > + spi-max-frequency = <44000000>; > + spi-cpha; > + spi-cpol; Are these 2 optional or required? Being optional is rare as most devices support 1 mode, but not unheard of. In general, you shouldn't need them as the driver should know how to configure the mode if the h/w is fixed. > + > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + label = "lan1"; > + }; > + port@1 { > + reg = <1>; > + label = "lan2"; > + }; > + port@2 { > + reg = <2>; > + label = "lan3"; > + }; > + port@3 { > + reg = <3>; > + label = "lan4"; > + }; > + port@4 { > + reg = <4>; > + label = "lan5"; > + }; > + port@5 { > + reg = <5>; > + label = "cpu"; > + ethernet = <ð0>; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > + > + ksz8565: switch@1 { > + compatible = "microchip,ksz8565"; > + reg = <1>; > + > + spi-max-frequency = <44000000>; > + spi-cpha; > + spi-cpol; > + > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + label = "lan1"; > + }; > + port@1 { > + reg = <1>; > + label = "lan2"; > + }; > + port@2 { > + reg = <2>; > + label = "lan3"; > + }; > + port@3 { > + reg = <3>; > + label = "lan4"; > + }; > + port@6 { > + reg = <6>; > + label = "cpu"; > + ethernet = <ð0>; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 18b5b7896af8..d1003033412f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11508,7 +11508,7 @@ M: Woojung Huh <woojung.huh@microchip.com> > M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> > L: netdev@vger.kernel.org > S: Maintained > -F: Documentation/devicetree/bindings/net/dsa/ksz.txt > +F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > F: drivers/net/dsa/microchip/* > F: include/linux/platform_data/microchip-ksz.h > F: net/dsa/tag_ksz.c > -- > Christian Eggers > Embedded software developer > > Arnold & Richter Cine Technik GmbH & Co. Betriebs KG > Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 > Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH > Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 > Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler >
On Thursday, 19 November 2020, 14:48:01 CET, Rob Herring wrote: > On Wed, Nov 18, 2020 at 09:30:02PM +0100, Christian Eggers wrote: > > Convert the bindings document for Microchip KSZ Series Ethernet switches > > from txt to yaml. > > > > Signed-off-by: Christian Eggers <ceggers@arri.de> > > --- > > > > .../devicetree/bindings/net/dsa/ksz.txt | 125 -------------- > > .../bindings/net/dsa/microchip,ksz.yaml | 152 ++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 153 insertions(+), 126 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt > > create mode 100644 > > Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml> > > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt > > b/Documentation/devicetree/bindings/net/dsa/ksz.txt deleted file mode > > 100644 > > index 95e91e84151c..000000000000 > > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt > > +++ /dev/null >> [...] > > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > > b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml new file > > mode 100644 > > index 000000000000..010adb09a68f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > > @@ -0,0 +1,152 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Microchip KSZ Series Ethernet switches > > + > > +allOf: > > + - $ref: dsa.yaml# > > Move this after 'maintainers'. changed for v4 > > > + > > +maintainers: > > + - Marek Vasut <marex@denx.de> > > + - Woojung Huh <Woojung.Huh@microchip.com> > > + > > +properties: > > + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of > > additional + # required and optional properties. > > + compatible: > > + enum: > > + - microchip,ksz8765 > > + - microchip,ksz8794 > > + - microchip,ksz8795 > > + - microchip,ksz9477 > > + - microchip,ksz9897 > > + - microchip,ksz9896 > > + - microchip,ksz9567 > > + - microchip,ksz8565 > > + - microchip,ksz9893 > > + - microchip,ksz9563 > > + - microchip,ksz8563 > > + > > + reset-gpios: > > + description: > > + Should be a gpio specifier for a reset line. > > + maxItems: 1 > > + > > + microchip,synclko-125: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: > > + Set if the output SYNCLKO frequency should be set to 125MHz instead > > of 25MHz. + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > You need to use unevaluatedProperties instead. dt_binding_check is happy now > > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + // Ethernet switch connected via SPI to the host, CPU port wired to > > eth0: + eth0 { > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + }; > > + }; > > + > > + spi0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pinctrl-0 = <&pinctrl_spi_ksz>; > > + cs-gpios = <&pioC 25 0>; > > + id = <1>; > > + > > + ksz9477: switch@0 { > > + compatible = "microchip,ksz9477"; > > + reg = <0>; > > + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > > + > > + spi-max-frequency = <44000000>; > > + spi-cpha; > > + spi-cpol; > > Are these 2 optional or required? Being optional is rare as most > devices support 1 mode, but not unheard of. From the data sheet: "Input data on SDI is latched on the rising edge of serial clock SCL. Output data on SDO is clocked on the falling edge of SCL." Clock has inverted polarity in all diagrams. > In general, you shouldn't > need them as the driver should know how to configure the mode if the h/w > is fixed. I will check this in the driver. This also requires updating at91-sama5d2_icp.dts. I personally use I2C instead of SPI on this chip. > > [...]
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt deleted file mode 100644 index 95e91e84151c..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ /dev/null @@ -1,125 +0,0 @@ -Microchip KSZ Series Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of the following: - - "microchip,ksz8765" - - "microchip,ksz8794" - - "microchip,ksz8795" - - "microchip,ksz9477" - - "microchip,ksz9897" - - "microchip,ksz9896" - - "microchip,ksz9567" - - "microchip,ksz8565" - - "microchip,ksz9893" - - "microchip,ksz9563" - - "microchip,ksz8563" - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to - 125MHz instead of 25MHz. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via SPI to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; - - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - ksz8565: ksz8565@0 { - compatible = "microchip,ksz8565"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml new file mode 100644 index 000000000000..010adb09a68f --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip KSZ Series Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Marek Vasut <marex@denx.de> + - Woojung Huh <Woojung.Huh@microchip.com> + +properties: + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional + # required and optional properties. + compatible: + enum: + - microchip,ksz8765 + - microchip,ksz8794 + - microchip,ksz8795 + - microchip,ksz9477 + - microchip,ksz9897 + - microchip,ksz9896 + - microchip,ksz9567 + - microchip,ksz8565 + - microchip,ksz9893 + - microchip,ksz9563 + - microchip,ksz8563 + + reset-gpios: + description: + Should be a gpio specifier for a reset line. + maxItems: 1 + + microchip,synclko-125: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + // Ethernet switch connected via SPI to the host, CPU port wired to eth0: + eth0 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; + + ksz9477: switch@0 { + compatible = "microchip,ksz9477"; + reg = <0>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + ksz8565: switch@1 { + compatible = "microchip,ksz8565"; + reg = <1>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 18b5b7896af8..d1003033412f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11508,7 +11508,7 @@ M: Woojung Huh <woojung.huh@microchip.com> M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/dsa/ksz.txt +F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml F: drivers/net/dsa/microchip/* F: include/linux/platform_data/microchip-ksz.h F: net/dsa/tag_ksz.c
Convert the bindings document for Microchip KSZ Series Ethernet switches from txt to yaml. Signed-off-by: Christian Eggers <ceggers@arri.de> --- .../devicetree/bindings/net/dsa/ksz.txt | 125 -------------- .../bindings/net/dsa/microchip,ksz.yaml | 152 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 153 insertions(+), 126 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml