| Message ID | 20201117082125.7619-1-min.guo@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usb: musb: remove unused variable 'devctl' | expand |
On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > From: Min Guo <min.guo@mediatek.com> > > Remove unused 'devctl' variable to fix compile warnings: > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > but not used [-Wunused-but-set-variable] > > Signed-off-by: Min Guo <min.guo@mediatek.com> > --- > drivers/usb/musb/musbhsdma.c | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > index 0aacfc8be5a1..7acd1635850d 100644 > --- a/drivers/usb/musb/musbhsdma.c > +++ b/drivers/usb/musb/musbhsdma.c > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > musb_channel->channel.status = > MUSB_DMA_STATUS_BUS_ABORT; > } else { > - u8 devctl; > - > addr = musb_read_hsdma_addr(mbase, > bchannel); > channel->actual_len = addr > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > < musb_channel->len) ? > "=> reconfig 0" : "=> complete"); > > - devctl = musb_readb(mbase, MUSB_DEVCTL); Are you sure that the hardware does not require this read to complete the command? Lots of hardware is that way, so be very careful about this. Did you test it? thanks, greg k-h
Hi greg k-h: On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > From: Min Guo <min.guo@mediatek.com> > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > but not used [-Wunused-but-set-variable] > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > --- > > drivers/usb/musb/musbhsdma.c | 4 ---- > > 1 file changed, 4 deletions(-) > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > index 0aacfc8be5a1..7acd1635850d 100644 > > --- a/drivers/usb/musb/musbhsdma.c > > +++ b/drivers/usb/musb/musbhsdma.c > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > musb_channel->channel.status = > > MUSB_DMA_STATUS_BUS_ABORT; > > } else { > > - u8 devctl; > > - > > addr = musb_read_hsdma_addr(mbase, > > bchannel); > > channel->actual_len = addr > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > < musb_channel->len) ? > > "=> reconfig 0" : "=> complete"); > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > Are you sure that the hardware does not require this read to complete > the command? Lots of hardware is that way, so be very careful about > this. Did you test it? I have tested this patch on Mediatek's platform, and not sure if it will affect other vendors' platforms. Dear Bin: Does this patch will affect other vendors' platforms? Best Regards, Min > thanks, > > greg k-h
On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > Hi greg k-h: > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > From: Min Guo <min.guo@mediatek.com> > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > but not used [-Wunused-but-set-variable] > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > --- > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > 1 file changed, 4 deletions(-) > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > --- a/drivers/usb/musb/musbhsdma.c > > > +++ b/drivers/usb/musb/musbhsdma.c > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > musb_channel->channel.status = > > > MUSB_DMA_STATUS_BUS_ABORT; > > > } else { > > > - u8 devctl; > > > - > > > addr = musb_read_hsdma_addr(mbase, > > > bchannel); > > > channel->actual_len = addr > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > < musb_channel->len) ? > > > "=> reconfig 0" : "=> complete"); > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > Are you sure that the hardware does not require this read to complete > > the command? Lots of hardware is that way, so be very careful about > > this. Did you test it? > > I have tested this patch on Mediatek's platform, and not sure if it > will affect other vendors' platforms. > > Dear Bin: > > Does this patch will affect other vendors' platforms? The hardware specs will answer this question, what do they say about this read? thanks, greg k-h
On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > Hi greg k-h: > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > but not used [-Wunused-but-set-variable] > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > --- > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > 1 file changed, 4 deletions(-) > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > musb_channel->channel.status = > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > } else { > > > > - u8 devctl; > > > > - > > > > addr = musb_read_hsdma_addr(mbase, > > > > bchannel); > > > > channel->actual_len = addr > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > < musb_channel->len) ? > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > Are you sure that the hardware does not require this read to complete > > > the command? Lots of hardware is that way, so be very careful about > > > this. Did you test it? > > > > I have tested this patch on Mediatek's platform, and not sure if it > > will affect other vendors' platforms. > > > > Dear Bin: > > > > Does this patch will affect other vendors' platforms? > > The hardware specs will answer this question, what do they say about > this read? Sorry, I didn't seen the comment on the hardware specs indicate that devctl register needs to read once to take effect. > thanks, > > greg k-h
On Fri, Nov 20, 2020 at 03:42:06PM +0800, Min Guo wrote: > On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > > Hi greg k-h: > > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > > but not used [-Wunused-but-set-variable] > > > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > > --- > > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > > 1 file changed, 4 deletions(-) > > > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > musb_channel->channel.status = > > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > > } else { > > > > > - u8 devctl; > > > > > - > > > > > addr = musb_read_hsdma_addr(mbase, > > > > > bchannel); > > > > > channel->actual_len = addr > > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > < musb_channel->len) ? > > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > > > Are you sure that the hardware does not require this read to complete > > > > the command? Lots of hardware is that way, so be very careful about > > > > this. Did you test it? > > > > > > I have tested this patch on Mediatek's platform, and not sure if it > > > will affect other vendors' platforms. > > > > > > Dear Bin: > > > > > > Does this patch will affect other vendors' platforms? > > > > The hardware specs will answer this question, what do they say about > > this read? > > Sorry, I didn't seen the comment on the hardware specs indicate that > devctl register needs to read once to take effect. Perhaps you might want to add a comment here so that people will not keep making this same mistake when they run auto-checkers on the codebase? thanks, greg k-h
On Fri, 2020-11-20 at 09:36 +0100, Greg Kroah-Hartman wrote: > On Fri, Nov 20, 2020 at 03:42:06PM +0800, Min Guo wrote: > > On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > > > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > > > Hi greg k-h: > > > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > > > but not used [-Wunused-but-set-variable] > > > > > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > > > --- > > > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > > > 1 file changed, 4 deletions(-) > > > > > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > musb_channel->channel.status = > > > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > > > } else { > > > > > > - u8 devctl; > > > > > > - > > > > > > addr = musb_read_hsdma_addr(mbase, > > > > > > bchannel); > > > > > > channel->actual_len = addr > > > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > < musb_channel->len) ? > > > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > > > > > Are you sure that the hardware does not require this read to complete > > > > > the command? Lots of hardware is that way, so be very careful about > > > > > this. Did you test it? > > > > > > > > I have tested this patch on Mediatek's platform, and not sure if it > > > > will affect other vendors' platforms. > > > > > > > > Dear Bin: > > > > > > > > Does this patch will affect other vendors' platforms? > > > > > > The hardware specs will answer this question, what do they say about > > > this read? > > > > Sorry, I didn't seen the comment on the hardware specs indicate that > > devctl register needs to read once to take effect. > > Perhaps you might want to add a comment here so that people will not > keep making this same mistake when they run auto-checkers on the > codebase? Sorry for confused you, I searched the hardware specs, but did not find the special description of the register devctl indicating that it needs to be read out before the hardware can work. > thanks, > > greg k-h
On Fri, Nov 20, 2020 at 05:02:15PM +0800, Min Guo wrote: > On Fri, 2020-11-20 at 09:36 +0100, Greg Kroah-Hartman wrote: > > On Fri, Nov 20, 2020 at 03:42:06PM +0800, Min Guo wrote: > > > On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > > > > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > > > > Hi greg k-h: > > > > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > > > > but not used [-Wunused-but-set-variable] > > > > > > > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > > > > --- > > > > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > > > > 1 file changed, 4 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > > musb_channel->channel.status = > > > > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > > > > } else { > > > > > > > - u8 devctl; > > > > > > > - > > > > > > > addr = musb_read_hsdma_addr(mbase, > > > > > > > bchannel); > > > > > > > channel->actual_len = addr > > > > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > > < musb_channel->len) ? > > > > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > > > > > > > Are you sure that the hardware does not require this read to complete > > > > > > the command? Lots of hardware is that way, so be very careful about > > > > > > this. Did you test it? > > > > > > > > > > I have tested this patch on Mediatek's platform, and not sure if it > > > > > will affect other vendors' platforms. > > > > > > > > > > Dear Bin: > > > > > > > > > > Does this patch will affect other vendors' platforms? > > > > > > > > The hardware specs will answer this question, what do they say about > > > > this read? > > > > > > Sorry, I didn't seen the comment on the hardware specs indicate that > > > devctl register needs to read once to take effect. > > > > Perhaps you might want to add a comment here so that people will not > > keep making this same mistake when they run auto-checkers on the > > codebase? > > Sorry for confused you, I searched the hardware specs, but did not find > the special description of the register devctl indicating that it needs > to be read out before the hardware can work. If this is a PCI device, that is implied as that is how all PCI devices work, right? What is the problem that is fixed by removing this read? thanks, greg k-h
On Fri, Nov 20, 2020 at 09:36:33AM +0100, Greg Kroah-Hartman wrote: > On Fri, Nov 20, 2020 at 03:42:06PM +0800, Min Guo wrote: > > On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > > > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > > > Hi greg k-h: > > > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > > > but not used [-Wunused-but-set-variable] > > > > > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > > > --- > > > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > > > 1 file changed, 4 deletions(-) > > > > > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > musb_channel->channel.status = > > > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > > > } else { > > > > > > - u8 devctl; > > > > > > - > > > > > > addr = musb_read_hsdma_addr(mbase, > > > > > > bchannel); > > > > > > channel->actual_len = addr > > > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > < musb_channel->len) ? > > > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > > > > > Are you sure that the hardware does not require this read to complete > > > > > the command? Lots of hardware is that way, so be very careful about > > > > > this. Did you test it? > > > > > > > > I have tested this patch on Mediatek's platform, and not sure if it > > > > will affect other vendors' platforms. > > > > > > > > Dear Bin: > > > > > > > > Does this patch will affect other vendors' platforms? > > > > > > The hardware specs will answer this question, what do they say about > > > this read? > > > > Sorry, I didn't seen the comment on the hardware specs indicate that > > devctl register needs to read once to take effect. > > Perhaps you might want to add a comment here so that people will not > keep making this same mistake when they run auto-checkers on the > codebase? A better change would be - devctl = musb_readb(mbase, MUSB_DEVCTL); + (void) musb_readb(mbase, MUSB_DEVCTL); and eliminate the unused variable. Then there wouldn't be any compiler warning. Alan Stern
On Fri, Nov 20, 2020 at 11:15:19AM -0500, Alan Stern wrote: > On Fri, Nov 20, 2020 at 09:36:33AM +0100, Greg Kroah-Hartman wrote: > > On Fri, Nov 20, 2020 at 03:42:06PM +0800, Min Guo wrote: > > > On Fri, 2020-11-20 at 07:54 +0100, Greg Kroah-Hartman wrote: > > > > On Fri, Nov 20, 2020 at 02:48:50PM +0800, Min Guo wrote: > > > > > Hi greg k-h: > > > > > On Wed, 2020-11-18 at 12:48 +0100, Greg Kroah-Hartman wrote: > > > > > > On Tue, Nov 17, 2020 at 04:21:25PM +0800, min.guo@mediatek.com wrote: > > > > > > > From: Min Guo <min.guo@mediatek.com> > > > > > > > > > > > > > > Remove unused 'devctl' variable to fix compile warnings: > > > > > > > > > > > > > > drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': > > > > > > > drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set > > > > > > > but not used [-Wunused-but-set-variable] > > > > > > > > > > > > > > Signed-off-by: Min Guo <min.guo@mediatek.com> > > > > > > > --- > > > > > > > drivers/usb/musb/musbhsdma.c | 4 ---- > > > > > > > 1 file changed, 4 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c > > > > > > > index 0aacfc8be5a1..7acd1635850d 100644 > > > > > > > --- a/drivers/usb/musb/musbhsdma.c > > > > > > > +++ b/drivers/usb/musb/musbhsdma.c > > > > > > > @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > > musb_channel->channel.status = > > > > > > > MUSB_DMA_STATUS_BUS_ABORT; > > > > > > > } else { > > > > > > > - u8 devctl; > > > > > > > - > > > > > > > addr = musb_read_hsdma_addr(mbase, > > > > > > > bchannel); > > > > > > > channel->actual_len = addr > > > > > > > @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) > > > > > > > < musb_channel->len) ? > > > > > > > "=> reconfig 0" : "=> complete"); > > > > > > > > > > > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > > > > > > > > > > > Are you sure that the hardware does not require this read to complete > > > > > > the command? Lots of hardware is that way, so be very careful about > > > > > > this. Did you test it? > > > > > > > > > > I have tested this patch on Mediatek's platform, and not sure if it > > > > > will affect other vendors' platforms. > > > > > > > > > > Dear Bin: > > > > > > > > > > Does this patch will affect other vendors' platforms? > > > > > > > > The hardware specs will answer this question, what do they say about > > > > this read? > > > > > > Sorry, I didn't seen the comment on the hardware specs indicate that > > > devctl register needs to read once to take effect. > > > > Perhaps you might want to add a comment here so that people will not > > keep making this same mistake when they run auto-checkers on the > > codebase? > > A better change would be > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > + (void) musb_readb(mbase, MUSB_DEVCTL); > > and eliminate the unused variable. Then there wouldn't be any compiler > warning. No need for the (void), the compiler shouldn't warn about that, right?
On Fri, Nov 20, 2020 at 05:32:44PM +0100, Greg Kroah-Hartman wrote: > On Fri, Nov 20, 2020 at 11:15:19AM -0500, Alan Stern wrote: > > > Perhaps you might want to add a comment here so that people will not > > > keep making this same mistake when they run auto-checkers on the > > > codebase? > > > > A better change would be > > > > - devctl = musb_readb(mbase, MUSB_DEVCTL); > > + (void) musb_readb(mbase, MUSB_DEVCTL); > > > > and eliminate the unused variable. Then there wouldn't be any compiler > > warning. > > No need for the (void), the compiler shouldn't warn about that, right? True, but it clearly indicates to a human reader that the value was intended to be read and thrown away. Alternatively, the (void) cast could be left out and a comment added. Alan Stern
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 0aacfc8be5a1..7acd1635850d 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -321,8 +321,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) musb_channel->channel.status = MUSB_DMA_STATUS_BUS_ABORT; } else { - u8 devctl; - addr = musb_read_hsdma_addr(mbase, bchannel); channel->actual_len = addr @@ -336,8 +334,6 @@ irqreturn_t dma_controller_irq(int irq, void *private_data) < musb_channel->len) ? "=> reconfig 0" : "=> complete"); - devctl = musb_readb(mbase, MUSB_DEVCTL); - channel->status = MUSB_DMA_STATUS_FREE; /* completed */