mbox series

[net-next,0/3] net: ipa: platform-specific clock and interconnect rates

Message ID 20201119224041.16066-1-elder@linaro.org (mailing list archive)
Headers show
Series net: ipa: platform-specific clock and interconnect rates | expand

Message

Alex Elder Nov. 19, 2020, 10:40 p.m. UTC 
This series changes the way the IPA core clock rate and the
bandwidth parameters for interconnects are specified.  Previously
these were specified with hard-wired constants, with the same values
used for the SDM845 and SC7180 platforms.  Now these parameters are
recorded in platform-specific configuration data.

For the SC7180 this means we use an all-new core clock rate and
interconnect parameters.

Additionally, while developing this I learned that the average
bandwidth setting for two of the interconnects is ignored (on both
platforms).  Zero is now used explicitly as that unused bandwidth
value.  This means the SDM845 bandwidth settings are also changed
by this series.

					-Alex

Alex Elder (3):
  net: ipa: define clock and interconnect data
  net: ipa: populate clock and interconnect data
  net: ipa: use config data for clocking

 drivers/net/ipa/ipa_clock.c       | 47 +++++++++++++++++--------------
 drivers/net/ipa/ipa_clock.h       |  5 +++-
 drivers/net/ipa/ipa_data-sc7180.c | 21 ++++++++++++++
 drivers/net/ipa/ipa_data-sdm845.c | 21 ++++++++++++++
 drivers/net/ipa/ipa_data.h        | 31 +++++++++++++++++++-
 drivers/net/ipa/ipa_main.c        | 21 +++++++-------
 6 files changed, 112 insertions(+), 34 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Nov. 21, 2020, 3 a.m. UTC | #1 
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Thu, 19 Nov 2020 16:40:38 -0600 you wrote:
> This series changes the way the IPA core clock rate and the
> bandwidth parameters for interconnects are specified.  Previously
> these were specified with hard-wired constants, with the same values
> used for the SDM845 and SC7180 platforms.  Now these parameters are
> recorded in platform-specific configuration data.
> 
> For the SC7180 this means we use an all-new core clock rate and
> interconnect parameters.
> 
> [...]

Here is the summary with links:
  - [net-next,1/3] net: ipa: define clock and interconnect data
    https://git.kernel.org/netdev/net-next/c/dfccb8b13c0c
  - [net-next,2/3] net: ipa: populate clock and interconnect data
    https://git.kernel.org/netdev/net-next/c/f08c99226458
  - [net-next,3/3] net: ipa: use config data for clocking
    https://git.kernel.org/netdev/net-next/c/91d02f955150

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html