mbox series

[4.4.y-cip,0/9] Add USB[2.0|3.0] support

Message ID 20201124170932.13588-1-biju.das.jz@bp.renesas.com (mailing list archive)
Headers show
Series Add USB[2.0|3.0] support | expand

Message

Biju Das Nov. 24, 2020, 5:09 p.m. UTC 
This patch series aims to add USB2.0/USB3.0 support for iWave
RZ/G1H platform.

All the patches in this series are cherrypicked from mainline and
it is based linux-4.4.y-cip.

Biju Das (1):
  usb: host: xhci-plat: Add r8a7742 support

Lad Prabhakar (8):
  dt-bindings: phy: rcar-gen2: Add r8a7742 support
  ARM: dts: r8a7742: Add USB 2.0 host support
  dt-bindings: usb: renesas,usbhs: Add support for r8a7742
  ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes
  dt-bindings: usb: usb-xhci: Document r8a7742 support
  ARM: dts: r8a7742: Add XHCI support
  pinctrl: sh-pfc: r8a7790: Add USB1 PWEN pin and group
  ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and xHCI

 .../devicetree/bindings/phy/rcar-gen2-phy.txt |   3 +-
 .../devicetree/bindings/usb/renesas_usbhs.txt |   1 +
 .../devicetree/bindings/usb/usb-xhci.txt      |   4 +-
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts       |  42 +++++
 arch/arm/boot/dts/r8a7742.dtsi                | 165 ++++++++++++++++++
 drivers/pinctrl/sh-pfc/pfc-r8a7790.c          |  11 +-
 drivers/usb/host/xhci-plat.c                  |   3 +
 7 files changed, 225 insertions(+), 4 deletions(-)

Comments

Pavel Machek Nov. 24, 2020, 7:05 p.m. UTC | #1 
Hi!

> This patch series aims to add USB2.0/USB3.0 support for iWave
> RZ/G1H platform.
> 
> All the patches in this series are cherrypicked from mainline and
> it is based linux-4.4.y-cip.

Series looks okay to me. If there are no other comments, I can apply
it.

Best regards,
								Pavel
Nobuhiro Iwamatsu Nov. 25, 2020, 6:19 a.m. UTC | #2 
Hi,

> -----Original Message-----
> From: Pavel Machek [mailto:pavel@denx.de]
> Sent: Wednesday, November 25, 2020 4:05 AM
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>; Chris Paterson <chris.paterson2@renesas.com>;
> Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Subject: Re: [PATCH 4.4.y-cip 0/9] Add USB[2.0|3.0] support
> 
> Hi!
> 
> > This patch series aims to add USB2.0/USB3.0 support for iWave
> > RZ/G1H platform.
> >
> > All the patches in this series are cherrypicked from mainline and
> > it is based linux-4.4.y-cip.
> 
> Series looks okay to me. If there are no other comments, I can apply
> it.

Looks good to me too, I applied and pushed this series.

Best regards,
  Nobuhiro
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5866): https://lists.cip-project.org/g/cip-dev/message/5866
Mute This Topic: https://lists.cip-project.org/mt/78481722/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-