mbox series

[V3,0/1] Add QPIC NAND support for IPQ6018

Message ID 1606734105-12414-1-git-send-email-kathirav@codeaurora.org (mailing list archive)
Headers show
Series Add QPIC NAND support for IPQ6018 | expand

Message

Kathiravan T Nov. 30, 2020, 11:01 a.m. UTC 
IPQ6018 has the QPIC NAND controller of version 1.5.0, which
uses the BAM DMA. Add support for the QPIC BAM, QPIC NAND and
enable the same in the board DTS file.

[V3]:
	- Rebased on v5.10-rc6
	- Renamed the qpic bam dma node name from 'dma' to 'dma-controller'
	- Update the device register space to 64bit format

	Above mentioned last two points based on the latest changes in the QCOM tree.

[V2]:
	- Rebased on v5.10-rc2
	- Replaced "ok" with "okay" for status property
	- Dropped the MTD and dt-bindings patch as they are already picked in MTD tree

Kathiravan T (1):
  arm64: dts: ipq6018: Add the QPIC peripheral nodes

 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 16 ++++++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi        | 41 ++++++++++++++++++++
 2 files changed, 57 insertions(+)


base-commit: b65054597872ce3aefbc6a666385eabdf9e288da

Comments

patchwork-bot+linux-arm-msm@kernel.org Nov. 30, 2020, 7 p.m. UTC | #1 
Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Mon, 30 Nov 2020 16:31:44 +0530 you wrote:
> IPQ6018 has the QPIC NAND controller of version 1.5.0, which
> uses the BAM DMA. Add support for the QPIC BAM, QPIC NAND and
> enable the same in the board DTS file.
> 
> [V3]:
> 	- Rebased on v5.10-rc6
> 	- Renamed the qpic bam dma node name from 'dma' to 'dma-controller'
> 	- Update the device register space to 64bit format
> 
> [...]

Here is the summary with links:
  - [V3,1/1] arm64: dts: ipq6018: Add the QPIC peripheral nodes
    https://git.kernel.org/qcom/c/74ab8ccfb8f3

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html