diff mbox series

[net-next,v4,3/4] dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY

Message ID 20201117201555.26723-4-dmurphy@ti.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series DP83TD510 Single Pair 10Mbps Ethernet PHY | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Dan Murphy Nov. 17, 2020, 8:15 p.m. UTC
The DP83TD510 is a 10M single twisted pair Ethernet PHY

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/net/ti,dp83td510.yaml | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml

Comments

Rob Herring Dec. 1, 2020, 12:13 a.m. UTC | #1
On Tue, Nov 17, 2020 at 02:15:54PM -0600, Dan Murphy wrote:
> The DP83TD510 is a 10M single twisted pair Ethernet PHY
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../devicetree/bindings/net/ti,dp83td510.yaml | 64 +++++++++++++++++++
>  1 file changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83td510.yaml b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> new file mode 100644
> index 000000000000..d3c97bb4d820
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2020 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/ti,dp83td510.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI DP83TD510 ethernet PHY
> +
> +allOf:
> +  - $ref: "ethernet-controller.yaml#"
> +  - $ref: "ethernet-phy.yaml#"
> +
> +maintainers:
> +  - Dan Murphy <dmurphy@ti.com>
> +
> +description: |
> +  The PHY is an twisted pair 10Mbps Ethernet PHY that support MII, RMII and
> +  RGMII interfaces.
> +
> +  Specifications about the Ethernet PHY can be found at:
> +    http://www.ti.com/lit/ds/symlink/dp83td510e.pdf
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  tx-fifo-depth:
> +    description: |
> +       Transmitt FIFO depth for RMII mode.  The PHY only exposes 4 nibble
> +       depths. The valid nibble depths are 4, 5, 6 and 8.
> +    enum: [ 4, 5, 6, 8 ]
> +    default: 5
> +
> +  rx-internal-delay-ps:
> +    description: |
> +       Setting this property to a non-zero number sets the RX internal delay
> +       for the PHY.  The internal delay for the PHY is fixed to 30ns relative
> +       to receive data.

I'm confused. The delay is 30ns +/- whatever is set here?

> +
> +  tx-internal-delay-ps:
> +    description: |
> +       Setting this property to a non-zero number sets the TX internal delay
> +       for the PHY.  The internal delay for the PHY has a range of -4 to 4ns
> +       relative to transmit data.

Sounds like constraints?

We do have a problem handling negative values though. Addressing in dtc 
was rejected, so we'll need to fixup the schema with unsigned values. 
But here it should just be negative values.

> +
> +unevaluatedProperties: false
> +
> +required:
> +  - reg
> +
> +examples:
> +  - |
> +    mdio0 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      ethphy0: ethernet-phy@0 {
> +        reg = <0>;
> +        tx-rx-output-high;
> +        tx-fifo-depth = <5>;
> +        rx-internal-delay-ps = <1>;
> +        tx-internal-delay-ps = <1>;
> +      };
> +    };
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ti,dp83td510.yaml b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
new file mode 100644
index 000000000000..d3c97bb4d820
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
@@ -0,0 +1,64 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83td510.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83TD510 ethernet PHY
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - $ref: "ethernet-phy.yaml#"
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The PHY is an twisted pair 10Mbps Ethernet PHY that support MII, RMII and
+  RGMII interfaces.
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83td510e.pdf
+
+properties:
+  reg:
+    maxItems: 1
+
+  tx-fifo-depth:
+    description: |
+       Transmitt FIFO depth for RMII mode.  The PHY only exposes 4 nibble
+       depths. The valid nibble depths are 4, 5, 6 and 8.
+    enum: [ 4, 5, 6, 8 ]
+    default: 5
+
+  rx-internal-delay-ps:
+    description: |
+       Setting this property to a non-zero number sets the RX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 30ns relative
+       to receive data.
+
+  tx-internal-delay-ps:
+    description: |
+       Setting this property to a non-zero number sets the TX internal delay
+       for the PHY.  The internal delay for the PHY has a range of -4 to 4ns
+       relative to transmit data.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        tx-rx-output-high;
+        tx-fifo-depth = <5>;
+        rx-internal-delay-ps = <1>;
+        tx-internal-delay-ps = <1>;
+      };
+    };