@@ -443,6 +443,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH
(MFD_INTEL_LPSS || COMPILE_TEST)) ||\
(SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
select SND_SOC_MAX98373_I2C
+ select SND_SOC_RT1011
select SND_SOC_RT1015
select SND_SOC_RT5682_I2C
select SND_SOC_DMIC
@@ -18,7 +18,7 @@ snd-soc-sst-byt-cht-cx2072x-objs := bytcht_cx2072x.o
snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
-snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o
+snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o sof_realtek_common.o
snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o
snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
new file mode 100644
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+#include <uapi/sound/asound.h>
+#include "../../codecs/rt1011.h"
+#include "sof_realtek_common.h"
+
+/*
+ * Current only 2-amp configuration is supported for rt1011
+ */
+static const struct snd_soc_dapm_route rt1011_dapm_routes[] = {
+ /* speaker */
+ { "Left Spk", NULL, "Left SPO" },
+ { "Right Spk", NULL, "Right SPO" },
+};
+
+/*
+ * Make sure device's Unique ID follows this configuration:
+ *
+ * Two speakers:
+ * 0: left, 1: right
+ * Four speakers:
+ * 0: Woofer left, 1: Woofer right
+ * 2: Tweeter left, 3: Tweeter right
+ */
+static struct snd_soc_codec_conf rt1011_codec_confs[] = {
+ {
+ .dlc = COMP_CODEC_CONF(RT1011_DEV0_NAME),
+ .name_prefix = "Left",
+ },
+ {
+ .dlc = COMP_CODEC_CONF(RT1011_DEV1_NAME),
+ .name_prefix = "Right",
+ },
+};
+
+static struct snd_soc_dai_link_component rt1011_dai_link_components[] = {
+ {
+ .name = RT1011_DEV0_NAME,
+ .dai_name = RT1011_CODEC_DAI,
+ },
+ {
+ .name = RT1011_DEV1_NAME,
+ .dai_name = RT1011_CODEC_DAI,
+ },
+};
+
+static const struct {
+ unsigned int tx;
+ unsigned int rx;
+} rt1011_tdm_mask[] = {
+ {.tx = 0x4, .rx = 0x1},
+ {.tx = 0x8, .rx = 0x2},
+};
+
+static int rt1011_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct snd_soc_dai *codec_dai;
+ int srate, i, ret = 0;
+
+ srate = params_rate(params);
+
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ /* 100 Fs to drive 24 bit data */
+ ret = snd_soc_dai_set_pll(codec_dai, 0, RT1011_PLL1_S_BCLK,
+ 100 * srate, 256 * srate);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set pll, ret %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT1011_FS_SYS_PRE_S_PLL1,
+ 256 * srate, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set sysclk, ret %d\n",
+ ret);
+ return ret;
+ }
+
+ if (i >= ARRAY_SIZE(rt1011_tdm_mask)) {
+ dev_err(codec_dai->dev, "invalid codec index %d\n",
+ i);
+ return -ENODEV;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, rt1011_tdm_mask[i].tx,
+ rt1011_tdm_mask[i].rx, 4,
+ params_width(params));
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_ops rt1011_ops = {
+ .hw_params = rt1011_hw_params,
+};
+
+static int rt1011_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ int ret;
+
+ ret = snd_soc_dapm_add_routes(&card->dapm, rt1011_dapm_routes,
+ ARRAY_SIZE(rt1011_dapm_routes));
+ if (ret)
+ dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+ return ret;
+}
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link)
+{
+ link->codecs = rt1011_dai_link_components;
+ link->num_codecs = ARRAY_SIZE(rt1011_dai_link_components);
+ link->init = rt1011_init;
+ link->ops = &rt1011_ops;
+}
+
+void sof_rt1011_codec_conf(struct snd_soc_card *card)
+{
+ card->codec_conf = rt1011_codec_confs;
+ card->num_configs = ARRAY_SIZE(rt1011_codec_confs);
+}
new file mode 100644
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+/*
+ * This file defines data structures used in Machine Driver for Intel
+ * platforms with Realtek Codecs.
+ */
+#ifndef __SOF_REALTEK_COMMON_H
+#define __SOF_REALTEK_COMMON_H
+
+#include <sound/soc.h>
+
+#define RT1011_CODEC_DAI "rt1011-aif"
+#define RT1011_DEV0_NAME "i2c-10EC1011:00"
+#define RT1011_DEV1_NAME "i2c-10EC1011:01"
+#define RT1011_DEV2_NAME "i2c-10EC1011:02"
+#define RT1011_DEV3_NAME "i2c-10EC1011:03"
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link);
+void sof_rt1011_codec_conf(struct snd_soc_card *card);
+
+#endif /* __SOF_REALTEK_COMMON_H */
@@ -24,6 +24,7 @@
#include "../common/soc-intel-quirks.h"
#include "hda_dsp_common.h"
#include "sof_maxim_common.h"
+#include "sof_realtek_common.h"
#define NAME_SIZE 32
@@ -41,10 +42,11 @@
#define SOF_RT5682_NUM_HDMIDEV_MASK (GENMASK(12, 10))
#define SOF_RT5682_NUM_HDMIDEV(quirk) \
((quirk << SOF_RT5682_NUM_HDMIDEV_SHIFT) & SOF_RT5682_NUM_HDMIDEV_MASK)
-#define SOF_RT1015_SPEAKER_AMP_PRESENT BIT(13)
-#define SOF_RT1015_SPEAKER_AMP_100FS BIT(14)
-#define SOF_MAX98373_SPEAKER_AMP_PRESENT BIT(15)
-#define SOF_MAX98360A_SPEAKER_AMP_PRESENT BIT(16)
+#define SOF_RT1011_SPEAKER_AMP_PRESENT BIT(13)
+#define SOF_RT1015_SPEAKER_AMP_PRESENT BIT(14)
+#define SOF_RT1015_SPEAKER_AMP_100FS BIT(15)
+#define SOF_MAX98373_SPEAKER_AMP_PRESENT BIT(16)
+#define SOF_MAX98360A_SPEAKER_AMP_PRESENT BIT(17)
/* Default: MCLK on, MCLK 19.2M, SSP0 */
static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -741,6 +743,9 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
links[id].codecs = max98360a_component;
links[id].num_codecs = ARRAY_SIZE(max98360a_component);
links[id].init = speaker_codec_init;
+ } else if (sof_rt5682_quirk &
+ SOF_RT1011_SPEAKER_AMP_PRESENT) {
+ sof_rt1011_dai_link(&links[id]);
} else {
links[id].codecs = max98357a_component;
links[id].num_codecs = ARRAY_SIZE(max98357a_component);
@@ -851,6 +856,8 @@ static int sof_audio_probe(struct platform_device *pdev)
if (sof_rt5682_quirk & SOF_MAX98373_SPEAKER_AMP_PRESENT)
sof_max98373_codec_conf(&sof_audio_card_rt5682);
+ else if (sof_rt5682_quirk & SOF_RT1011_SPEAKER_AMP_PRESENT)
+ sof_rt1011_codec_conf(&sof_audio_card_rt5682);
dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec, ssp_amp,
dmic_be_num, hdmi_num);
@@ -931,6 +938,15 @@ static const struct platform_device_id board_ids[] = {
SOF_RT1015_SPEAKER_AMP_100FS |
SOF_RT5682_SSP_AMP(1)),
},
+ {
+ .name = "tgl_rt1011_rt5682",
+ .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+ SOF_RT5682_SSP_CODEC(0) |
+ SOF_SPEAKER_AMP_PRESENT |
+ SOF_RT1011_SPEAKER_AMP_PRESENT |
+ SOF_RT5682_SSP_AMP(1) |
+ SOF_RT5682_NUM_HDMIDEV(4)),
+ },
{ }
};
@@ -948,6 +964,7 @@ module_platform_driver(sof_audio)
MODULE_DESCRIPTION("SOF Audio Machine driver");
MODULE_AUTHOR("Bard Liao <bard.liao@intel.com>");
MODULE_AUTHOR("Sathya Prakash M R <sathya.prakash.m.r@intel.com>");
+MODULE_AUTHOR("Brent Lu <brent.lu@intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sof_rt5682");
MODULE_ALIAS("platform:tgl_max98357a_rt5682");
@@ -955,3 +972,4 @@ MODULE_ALIAS("platform:jsl_rt5682_rt1015");
MODULE_ALIAS("platform:tgl_max98373_rt5682");
MODULE_ALIAS("platform:jsl_rt5682_max98360a");
MODULE_ALIAS("platform:cml_rt1015_rt5682");
+MODULE_ALIAS("platform:tgl_rt1011_rt5682");
@@ -9,7 +9,7 @@
#include <sound/soc-acpi.h>
#include <sound/soc-acpi-intel-match.h>
-static struct snd_soc_acpi_codecs tgl_codecs = {
+static const struct snd_soc_acpi_codecs tgl_codecs = {
.num_codecs = 1,
.codecs = {"MX98357A"}
};
@@ -305,11 +305,16 @@ static const struct snd_soc_acpi_link_adr tgl_3_in_1_sdca[] = {
{}
};
-static struct snd_soc_acpi_codecs tgl_max98373_amp = {
+static const struct snd_soc_acpi_codecs tgl_max98373_amp = {
.num_codecs = 1,
.codecs = {"MX98373"}
};
+static const struct snd_soc_acpi_codecs tgl_rt1011_amp = {
+ .num_codecs = 1,
+ .codecs = {"10EC1011"}
+};
+
struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
{
.id = "10EC1308",
@@ -335,6 +340,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
.sof_fw_filename = "sof-tgl.ri",
.sof_tplg_filename = "sof-tgl-max98373-rt5682.tplg",
},
+ {
+ .id = "10EC5682",
+ .drv_name = "tgl_rt1011_rt5682",
+ .machine_quirk = snd_soc_acpi_codec_list,
+ .quirk_data = &tgl_rt1011_amp,
+ .sof_fw_filename = "sof-tgl.ri",
+ .sof_tplg_filename = "sof-tgl-rt1011-rt5682.tplg",
+ },
{},
};
EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_machines);
This patch adds the driver data for two rt1011 speaker amplifiers on SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk. Signed-off-by: Brent Lu <brent.lu@intel.com> --- sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/Makefile | 2 +- sound/soc/intel/boards/sof_realtek_common.c | 138 ++++++++++++++++++ sound/soc/intel/boards/sof_realtek_common.h | 24 +++ sound/soc/intel/boards/sof_rt5682.c | 26 +++- .../intel/common/soc-acpi-intel-tgl-match.c | 17 ++- 6 files changed, 201 insertions(+), 7 deletions(-) create mode 100644 sound/soc/intel/boards/sof_realtek_common.c create mode 100644 sound/soc/intel/boards/sof_realtek_common.h