Message ID | 20201125172618.112707-4-zhouyanjie@wanyeetech.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | Add new clocks for Ingenic SoCs. | expand |
Hi Zhou, Le jeu. 26 nov. 2020 à 1:26, 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> a écrit : > Add CIM, AIC, DMIC clocks for the X1000 SoC, and CIM, AIC, DMIC, I2S > clocks for the X1830 SoC from Ingenic. > > Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> > --- > drivers/clk/ingenic/x1000-cgu.c | 19 ++++ > drivers/clk/ingenic/x1830-cgu.c | 189 > +++++++++++++++++++++++++++++++++++++++- > 2 files changed, 207 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/ingenic/x1000-cgu.c > b/drivers/clk/ingenic/x1000-cgu.c > index 9aa20b5..d340bcd 100644 > --- a/drivers/clk/ingenic/x1000-cgu.c > +++ b/drivers/clk/ingenic/x1000-cgu.c > @@ -360,6 +360,13 @@ static const struct ingenic_cgu_clk_info > x1000_cgu_clocks[] = { > .mux = { CGU_REG_SSICDR, 30, 1 }, > }, > > + [X1000_CLK_CIM] = { > + "cim", CGU_CLK_MUX | CGU_CLK_DIV, > + .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 }, > + .mux = { CGU_REG_CIMCDR, 31, 1 }, > + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, > + }, > + > [X1000_CLK_EXCLK_DIV512] = { > "exclk_div512", CGU_CLK_FIXDIV, > .parents = { X1000_CLK_EXCLK }, > @@ -411,6 +418,12 @@ static const struct ingenic_cgu_clk_info > x1000_cgu_clocks[] = { > .gate = { CGU_REG_CLKGR, 9 }, > }, > > + [X1000_CLK_AIC] = { > + "aic", CGU_CLK_GATE, > + .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, > + .gate = { CGU_REG_CLKGR, 11 }, > + }, > + > [X1000_CLK_UART0] = { > "uart0", CGU_CLK_GATE, > .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, > @@ -429,6 +442,12 @@ static const struct ingenic_cgu_clk_info > x1000_cgu_clocks[] = { > .gate = { CGU_REG_CLKGR, 16 }, > }, > > + [X1000_CLK_DMIC] = { > + "dmic", CGU_CLK_GATE, > + .parents = { X1000_CLK_PCLK, -1, -1, -1 }, > + .gate = { CGU_REG_CLKGR, 17 }, > + }, > + > [X1000_CLK_TCU] = { > "tcu", CGU_CLK_GATE, > .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, > diff --git a/drivers/clk/ingenic/x1830-cgu.c > b/drivers/clk/ingenic/x1830-cgu.c > index 950aee2..e76e82c 100644 > --- a/drivers/clk/ingenic/x1830-cgu.c > +++ b/drivers/clk/ingenic/x1830-cgu.c > @@ -52,6 +52,15 @@ > #define USBPCR_SIDDQ BIT(21) > #define USBPCR_OTG_DISABLE BIT(20) > > +/* bits within the I2SCDR register */ > +#define I2SCDR_I2PCS_SHIFT 30 > +#define I2SCDR_I2PCS_MASK (0x3 << I2SCDR_I2PCS_SHIFT) > +#define I2SCDR_I2SDIV_M_SHIFT 20 > +#define I2SCDR_I2SDIV_M_MASK (0x1ff << I2SCDR_I2SDIV_M_SHIFT) > +#define I2SCDR_I2SDIV_N_SHIFT 0 > +#define I2SCDR_I2SDIV_N_MASK (0xfffff << I2SCDR_I2SDIV_N_SHIFT) > +#define I2SCDR_CE_I2S BIT(29) > + > static struct ingenic_cgu *cgu; > > static int x1830_usb_phy_enable(struct clk_hw *hw) > @@ -89,6 +98,157 @@ static const struct clk_ops x1830_otg_phy_ops = { > .is_enabled = x1830_usb_phy_is_enabled, > }; > > +static u8 x1830_i2s_get_parent(struct clk_hw *hw) > +{ > + u32 i2scdr; > + > + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); > + > + return (i2scdr & I2SCDR_I2PCS_MASK) >> I2SCDR_I2PCS_SHIFT; > +} > + > +static int x1830_i2s_set_parent(struct clk_hw *hw, u8 idx) > +{ > + writel(idx << I2SCDR_I2PCS_SHIFT, cgu->base + CGU_REG_I2SCDR); > + > + return 0; > +} > + > +static unsigned long x1830_i2s_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + unsigned m, n; > + u32 i2scdr; > + > + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); > + > + m = (i2scdr & I2SCDR_I2SDIV_M_MASK) >> I2SCDR_I2SDIV_M_SHIFT; > + n = (i2scdr & I2SCDR_I2SDIV_N_MASK) >> I2SCDR_I2SDIV_N_SHIFT; > + > + return div_u64((u64)parent_rate * m, n); From what I can see here, your i2s clock is a PLL. You can probably use CGU_CLK_PLL, with od_bits = od_max = 0 (you'll need to remove the second BUG_ON() in ingenic_pll_recalc_rate). Cheers, -Paul > +} > + > +static unsigned long x1830_i2s_calc(unsigned long rate, unsigned > long parent_rate, > + unsigned *pm, unsigned *pn) > +{ > + u64 curr_delta, curr_m, curr_n, delta, m, n; > + > + if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) { > + m = 1; > + n = parent_rate / rate; > + goto out; > + } > + > + delta = rate; > + > + /* > + * The length of M is 9 bits, its value must be between 1 and 511. > + * The length of N is 20 bits, its value must be between 2 and > 1048575, > + * and must not be less than 2 times of the value of M. > + */ > + for (curr_m = 511; curr_m >= 1; curr_m--) { > + curr_n = parent_rate * curr_m; > + curr_delta = do_div(curr_n, rate); > + > + if (curr_n < 2 * curr_m || curr_n > 1048575) > + continue; > + > + if (curr_delta == 0) > + break; > + > + if (curr_delta < delta) { > + m = curr_m; > + n = curr_n; > + delta = curr_delta; > + } > + } > + > +out: > + if (pm) > + *pm = m; > + if (pn) > + *pn = n; > + > + return div_u64((u64)parent_rate * m, n); > +} > + > +static long x1830_i2s_round_rate(struct clk_hw *hw, unsigned long > req_rate, > + unsigned long *prate) > +{ > + return x1830_i2s_calc(req_rate, *prate, NULL, NULL); > +} > + > +static int x1830_i2s_set_rate(struct clk_hw *hw, unsigned long > req_rate, > + unsigned long parent_rate) > +{ > + unsigned long rate; > + unsigned m, n; > + u32 ctl; > + > + /* > + * The parent clock rate of I2S must not be lower than 2 times > + * of the target clock rate. > + */ > + if (parent_rate < 2 * req_rate) > + return -EINVAL; > + > + rate = x1830_i2s_calc(req_rate, parent_rate, &m, &n); > + if (rate != req_rate) > + pr_info("%s: request I2S rate %luHz, actual %luHz\n", __func__, > + req_rate, rate); > + > + ctl = readl(cgu->base + CGU_REG_I2SCDR); > + ctl &= ~I2SCDR_I2SDIV_M_MASK; > + ctl |= m << I2SCDR_I2SDIV_M_SHIFT; > + ctl &= ~I2SCDR_I2SDIV_N_MASK; > + ctl |= n << I2SCDR_I2SDIV_N_SHIFT; > + writel(ctl, cgu->base + CGU_REG_I2SCDR); > + > + return 0; > +} > + > +static int x1830_i2s_enable(struct clk_hw *hw) > +{ > + u32 ctl; > + > + ctl = readl(cgu->base + CGU_REG_I2SCDR); > + ctl |= I2SCDR_CE_I2S; > + writel(ctl, cgu->base + CGU_REG_I2SCDR); > + > + return 0; > +} > + > +static void x1830_i2s_disable(struct clk_hw *hw) > +{ > + u32 ctl; > + > + ctl = readl(cgu->base + CGU_REG_I2SCDR); > + ctl &= ~I2SCDR_CE_I2S; > + writel(ctl, cgu->base + CGU_REG_I2SCDR); > +} > + > +static int x1830_i2s_is_enabled(struct clk_hw *hw) > +{ > + u32 ctl; > + > + ctl = readl(cgu->base + CGU_REG_I2SCDR); > + > + return !!(ctl & I2SCDR_CE_I2S); > +} > + > +static const struct clk_ops x1830_i2s_ops = { > + .get_parent = x1830_i2s_get_parent, > + .set_parent = x1830_i2s_set_parent, > + > + .recalc_rate = x1830_i2s_recalc_rate, > + .round_rate = x1830_i2s_round_rate, > + .set_rate = x1830_i2s_set_rate, > + > + .enable = x1830_i2s_enable, > + .disable = x1830_i2s_disable, > + .is_enabled = x1830_i2s_is_enabled, > +}; > + > static const s8 pll_od_encoding[64] = { > 0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3, > -1, -1, -1, -1, -1, -1, -1, 0x4, > @@ -201,7 +361,7 @@ static const struct ingenic_cgu_clk_info > x1830_cgu_clocks[] = { > }, > }, > > - /* Custom (SoC-specific) OTG PHY */ > + /* Custom (SoC-specific) */ > > [X1830_CLK_OTGPHY] = { > "otg_phy", CGU_CLK_CUSTOM, > @@ -209,6 +369,13 @@ static const struct ingenic_cgu_clk_info > x1830_cgu_clocks[] = { > .custom = { &x1830_otg_phy_ops }, > }, > > + [X1830_CLK_I2S] = { > + "i2s", CGU_CLK_CUSTOM, > + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, > + X1830_CLK_VPLL, X1830_CLK_EPLL }, > + .custom = { &x1830_i2s_ops }, > + }, > + > /* Muxes & dividers */ > > [X1830_CLK_SCLKA] = { > @@ -329,6 +496,14 @@ static const struct ingenic_cgu_clk_info > x1830_cgu_clocks[] = { > .mux = { CGU_REG_SSICDR, 29, 1 }, > }, > > + [X1830_CLK_CIM] = { > + "cim", CGU_CLK_MUX | CGU_CLK_DIV, > + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, > + X1830_CLK_VPLL, X1830_CLK_EPLL }, > + .mux = { CGU_REG_CIMCDR, 30, 2 }, > + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, > + }, > + > [X1830_CLK_EXCLK_DIV512] = { > "exclk_div512", CGU_CLK_FIXDIV, > .parents = { X1830_CLK_EXCLK }, > @@ -386,6 +561,18 @@ static const struct ingenic_cgu_clk_info > x1830_cgu_clocks[] = { > .gate = { CGU_REG_CLKGR0, 9 }, > }, > > + [X1830_CLK_AIC] = { > + "aic", CGU_CLK_GATE, > + .parents = { X1830_CLK_EXCLK, -1, -1, -1 }, > + .gate = { CGU_REG_CLKGR0, 11 }, > + }, > + > + [X1830_CLK_DMIC] = { > + "dmic", CGU_CLK_GATE, > + .parents = { X1830_CLK_PCLK, -1, -1, -1 }, > + .gate = { CGU_REG_CLKGR0, 12 }, > + }, > + > [X1830_CLK_UART0] = { > "uart0", CGU_CLK_GATE, > .parents = { X1830_CLK_EXCLK, -1, -1, -1 }, > -- > 2.7.4 >
Hi Paul, On 2020/12/3 上午6:18, Paul Cercueil wrote: > Hi Zhou, > > Le jeu. 26 nov. 2020 à 1:26, 周琰杰 (Zhou Yanjie) > <zhouyanjie@wanyeetech.com> a écrit : >> Add CIM, AIC, DMIC clocks for the X1000 SoC, and CIM, AIC, DMIC, I2S >> clocks for the X1830 SoC from Ingenic. >> >> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> >> --- >> drivers/clk/ingenic/x1000-cgu.c | 19 ++++ >> drivers/clk/ingenic/x1830-cgu.c | 189 >> +++++++++++++++++++++++++++++++++++++++- >> 2 files changed, 207 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/clk/ingenic/x1000-cgu.c >> b/drivers/clk/ingenic/x1000-cgu.c >> index 9aa20b5..d340bcd 100644 >> --- a/drivers/clk/ingenic/x1000-cgu.c >> +++ b/drivers/clk/ingenic/x1000-cgu.c >> @@ -360,6 +360,13 @@ static const struct ingenic_cgu_clk_info >> x1000_cgu_clocks[] = { >> .mux = { CGU_REG_SSICDR, 30, 1 }, >> }, >> >> + [X1000_CLK_CIM] = { >> + "cim", CGU_CLK_MUX | CGU_CLK_DIV, >> + .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 }, >> + .mux = { CGU_REG_CIMCDR, 31, 1 }, >> + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, >> + }, >> + >> [X1000_CLK_EXCLK_DIV512] = { >> "exclk_div512", CGU_CLK_FIXDIV, >> .parents = { X1000_CLK_EXCLK }, >> @@ -411,6 +418,12 @@ static const struct ingenic_cgu_clk_info >> x1000_cgu_clocks[] = { >> .gate = { CGU_REG_CLKGR, 9 }, >> }, >> >> + [X1000_CLK_AIC] = { >> + "aic", CGU_CLK_GATE, >> + .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, >> + .gate = { CGU_REG_CLKGR, 11 }, >> + }, >> + >> [X1000_CLK_UART0] = { >> "uart0", CGU_CLK_GATE, >> .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, >> @@ -429,6 +442,12 @@ static const struct ingenic_cgu_clk_info >> x1000_cgu_clocks[] = { >> .gate = { CGU_REG_CLKGR, 16 }, >> }, >> >> + [X1000_CLK_DMIC] = { >> + "dmic", CGU_CLK_GATE, >> + .parents = { X1000_CLK_PCLK, -1, -1, -1 }, >> + .gate = { CGU_REG_CLKGR, 17 }, >> + }, >> + >> [X1000_CLK_TCU] = { >> "tcu", CGU_CLK_GATE, >> .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, >> diff --git a/drivers/clk/ingenic/x1830-cgu.c >> b/drivers/clk/ingenic/x1830-cgu.c >> index 950aee2..e76e82c 100644 >> --- a/drivers/clk/ingenic/x1830-cgu.c >> +++ b/drivers/clk/ingenic/x1830-cgu.c >> @@ -52,6 +52,15 @@ >> #define USBPCR_SIDDQ BIT(21) >> #define USBPCR_OTG_DISABLE BIT(20) >> >> +/* bits within the I2SCDR register */ >> +#define I2SCDR_I2PCS_SHIFT 30 >> +#define I2SCDR_I2PCS_MASK (0x3 << I2SCDR_I2PCS_SHIFT) >> +#define I2SCDR_I2SDIV_M_SHIFT 20 >> +#define I2SCDR_I2SDIV_M_MASK (0x1ff << I2SCDR_I2SDIV_M_SHIFT) >> +#define I2SCDR_I2SDIV_N_SHIFT 0 >> +#define I2SCDR_I2SDIV_N_MASK (0xfffff << I2SCDR_I2SDIV_N_SHIFT) >> +#define I2SCDR_CE_I2S BIT(29) >> + >> static struct ingenic_cgu *cgu; >> >> static int x1830_usb_phy_enable(struct clk_hw *hw) >> @@ -89,6 +98,157 @@ static const struct clk_ops x1830_otg_phy_ops = { >> .is_enabled = x1830_usb_phy_is_enabled, >> }; >> >> +static u8 x1830_i2s_get_parent(struct clk_hw *hw) >> +{ >> + u32 i2scdr; >> + >> + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); >> + >> + return (i2scdr & I2SCDR_I2PCS_MASK) >> I2SCDR_I2PCS_SHIFT; >> +} >> + >> +static int x1830_i2s_set_parent(struct clk_hw *hw, u8 idx) >> +{ >> + writel(idx << I2SCDR_I2PCS_SHIFT, cgu->base + CGU_REG_I2SCDR); >> + >> + return 0; >> +} >> + >> +static unsigned long x1830_i2s_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + unsigned m, n; >> + u32 i2scdr; >> + >> + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); >> + >> + m = (i2scdr & I2SCDR_I2SDIV_M_MASK) >> I2SCDR_I2SDIV_M_SHIFT; >> + n = (i2scdr & I2SCDR_I2SDIV_N_MASK) >> I2SCDR_I2SDIV_N_SHIFT; >> + >> + return div_u64((u64)parent_rate * m, n); > > From what I can see here, your i2s clock is a PLL. You can probably > use CGU_CLK_PLL, with od_bits = od_max = 0 (you'll need to remove the > second BUG_ON() in ingenic_pll_recalc_rate). > Unfortunately, due to constraints, we cannot use it for i2s with only minor changes to the code related to CGU_CLK_PLL. Because in main PLLs such as APLL and MPLL, the value of M is often much larger than the value of N, but in i2s, the value of N must not be less than twice the value of M. So there is no way to achieve these two constraints at the same time, which leads us to use CGU_CLK_PLL, so I chose to use CGU_CLK_CUSTOM as a last resort. I haven't figured out a better way yet. Do you have any good ideas? Thanks and best regards! > Cheers, > -Paul > >> +} >> + >> +static unsigned long x1830_i2s_calc(unsigned long rate, unsigned >> long parent_rate, >> + unsigned *pm, unsigned *pn) >> +{ >> + u64 curr_delta, curr_m, curr_n, delta, m, n; >> + >> + if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) { >> + m = 1; >> + n = parent_rate / rate; >> + goto out; >> + } >> + >> + delta = rate; >> + >> + /* >> + * The length of M is 9 bits, its value must be between 1 and 511. >> + * The length of N is 20 bits, its value must be between 2 and >> 1048575, >> + * and must not be less than 2 times of the value of M. >> + */ >> + for (curr_m = 511; curr_m >= 1; curr_m--) { >> + curr_n = parent_rate * curr_m; >> + curr_delta = do_div(curr_n, rate); >> + >> + if (curr_n < 2 * curr_m || curr_n > 1048575) >> + continue; >> + >> + if (curr_delta == 0) >> + break; >> + >> + if (curr_delta < delta) { >> + m = curr_m; >> + n = curr_n; >> + delta = curr_delta; >> + } >> + } >> + >> +out: >> + if (pm) >> + *pm = m; >> + if (pn) >> + *pn = n; >> + >> + return div_u64((u64)parent_rate * m, n); >> +} >> + >> +static long x1830_i2s_round_rate(struct clk_hw *hw, unsigned long >> req_rate, >> + unsigned long *prate) >> +{ >> + return x1830_i2s_calc(req_rate, *prate, NULL, NULL); >> +} >> + >> +static int x1830_i2s_set_rate(struct clk_hw *hw, unsigned long >> req_rate, >> + unsigned long parent_rate) >> +{ >> + unsigned long rate; >> + unsigned m, n; >> + u32 ctl; >> + >> + /* >> + * The parent clock rate of I2S must not be lower than 2 times >> + * of the target clock rate. >> + */ >> + if (parent_rate < 2 * req_rate) >> + return -EINVAL; >> + >> + rate = x1830_i2s_calc(req_rate, parent_rate, &m, &n); >> + if (rate != req_rate) >> + pr_info("%s: request I2S rate %luHz, actual %luHz\n", __func__, >> + req_rate, rate); >> + >> + ctl = readl(cgu->base + CGU_REG_I2SCDR); >> + ctl &= ~I2SCDR_I2SDIV_M_MASK; >> + ctl |= m << I2SCDR_I2SDIV_M_SHIFT; >> + ctl &= ~I2SCDR_I2SDIV_N_MASK; >> + ctl |= n << I2SCDR_I2SDIV_N_SHIFT; >> + writel(ctl, cgu->base + CGU_REG_I2SCDR); >> + >> + return 0; >> +} >> + >> +static int x1830_i2s_enable(struct clk_hw *hw) >> +{ >> + u32 ctl; >> + >> + ctl = readl(cgu->base + CGU_REG_I2SCDR); >> + ctl |= I2SCDR_CE_I2S; >> + writel(ctl, cgu->base + CGU_REG_I2SCDR); >> + >> + return 0; >> +} >> + >> +static void x1830_i2s_disable(struct clk_hw *hw) >> +{ >> + u32 ctl; >> + >> + ctl = readl(cgu->base + CGU_REG_I2SCDR); >> + ctl &= ~I2SCDR_CE_I2S; >> + writel(ctl, cgu->base + CGU_REG_I2SCDR); >> +} >> + >> +static int x1830_i2s_is_enabled(struct clk_hw *hw) >> +{ >> + u32 ctl; >> + >> + ctl = readl(cgu->base + CGU_REG_I2SCDR); >> + >> + return !!(ctl & I2SCDR_CE_I2S); >> +} >> + >> +static const struct clk_ops x1830_i2s_ops = { >> + .get_parent = x1830_i2s_get_parent, >> + .set_parent = x1830_i2s_set_parent, >> + >> + .recalc_rate = x1830_i2s_recalc_rate, >> + .round_rate = x1830_i2s_round_rate, >> + .set_rate = x1830_i2s_set_rate, >> + >> + .enable = x1830_i2s_enable, >> + .disable = x1830_i2s_disable, >> + .is_enabled = x1830_i2s_is_enabled, >> +}; >> + >> static const s8 pll_od_encoding[64] = { >> 0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3, >> -1, -1, -1, -1, -1, -1, -1, 0x4, >> @@ -201,7 +361,7 @@ static const struct ingenic_cgu_clk_info >> x1830_cgu_clocks[] = { >> }, >> }, >> >> - /* Custom (SoC-specific) OTG PHY */ >> + /* Custom (SoC-specific) */ >> >> [X1830_CLK_OTGPHY] = { >> "otg_phy", CGU_CLK_CUSTOM, >> @@ -209,6 +369,13 @@ static const struct ingenic_cgu_clk_info >> x1830_cgu_clocks[] = { >> .custom = { &x1830_otg_phy_ops }, >> }, >> >> + [X1830_CLK_I2S] = { >> + "i2s", CGU_CLK_CUSTOM, >> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, >> + X1830_CLK_VPLL, X1830_CLK_EPLL }, >> + .custom = { &x1830_i2s_ops }, >> + }, >> + >> /* Muxes & dividers */ >> >> [X1830_CLK_SCLKA] = { >> @@ -329,6 +496,14 @@ static const struct ingenic_cgu_clk_info >> x1830_cgu_clocks[] = { >> .mux = { CGU_REG_SSICDR, 29, 1 }, >> }, >> >> + [X1830_CLK_CIM] = { >> + "cim", CGU_CLK_MUX | CGU_CLK_DIV, >> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, >> + X1830_CLK_VPLL, X1830_CLK_EPLL }, >> + .mux = { CGU_REG_CIMCDR, 30, 2 }, >> + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, >> + }, >> + >> [X1830_CLK_EXCLK_DIV512] = { >> "exclk_div512", CGU_CLK_FIXDIV, >> .parents = { X1830_CLK_EXCLK }, >> @@ -386,6 +561,18 @@ static const struct ingenic_cgu_clk_info >> x1830_cgu_clocks[] = { >> .gate = { CGU_REG_CLKGR0, 9 }, >> }, >> >> + [X1830_CLK_AIC] = { >> + "aic", CGU_CLK_GATE, >> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 }, >> + .gate = { CGU_REG_CLKGR0, 11 }, >> + }, >> + >> + [X1830_CLK_DMIC] = { >> + "dmic", CGU_CLK_GATE, >> + .parents = { X1830_CLK_PCLK, -1, -1, -1 }, >> + .gate = { CGU_REG_CLKGR0, 12 }, >> + }, >> + >> [X1830_CLK_UART0] = { >> "uart0", CGU_CLK_GATE, >> .parents = { X1830_CLK_EXCLK, -1, -1, -1 }, >> -- >> 2.7.4 >> >
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c index 9aa20b5..d340bcd 100644 --- a/drivers/clk/ingenic/x1000-cgu.c +++ b/drivers/clk/ingenic/x1000-cgu.c @@ -360,6 +360,13 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = { .mux = { CGU_REG_SSICDR, 30, 1 }, }, + [X1000_CLK_CIM] = { + "cim", CGU_CLK_MUX | CGU_CLK_DIV, + .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 }, + .mux = { CGU_REG_CIMCDR, 31, 1 }, + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, + }, + [X1000_CLK_EXCLK_DIV512] = { "exclk_div512", CGU_CLK_FIXDIV, .parents = { X1000_CLK_EXCLK }, @@ -411,6 +418,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = { .gate = { CGU_REG_CLKGR, 9 }, }, + [X1000_CLK_AIC] = { + "aic", CGU_CLK_GATE, + .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, + .gate = { CGU_REG_CLKGR, 11 }, + }, + [X1000_CLK_UART0] = { "uart0", CGU_CLK_GATE, .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, @@ -429,6 +442,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = { .gate = { CGU_REG_CLKGR, 16 }, }, + [X1000_CLK_DMIC] = { + "dmic", CGU_CLK_GATE, + .parents = { X1000_CLK_PCLK, -1, -1, -1 }, + .gate = { CGU_REG_CLKGR, 17 }, + }, + [X1000_CLK_TCU] = { "tcu", CGU_CLK_GATE, .parents = { X1000_CLK_EXCLK, -1, -1, -1 }, diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c index 950aee2..e76e82c 100644 --- a/drivers/clk/ingenic/x1830-cgu.c +++ b/drivers/clk/ingenic/x1830-cgu.c @@ -52,6 +52,15 @@ #define USBPCR_SIDDQ BIT(21) #define USBPCR_OTG_DISABLE BIT(20) +/* bits within the I2SCDR register */ +#define I2SCDR_I2PCS_SHIFT 30 +#define I2SCDR_I2PCS_MASK (0x3 << I2SCDR_I2PCS_SHIFT) +#define I2SCDR_I2SDIV_M_SHIFT 20 +#define I2SCDR_I2SDIV_M_MASK (0x1ff << I2SCDR_I2SDIV_M_SHIFT) +#define I2SCDR_I2SDIV_N_SHIFT 0 +#define I2SCDR_I2SDIV_N_MASK (0xfffff << I2SCDR_I2SDIV_N_SHIFT) +#define I2SCDR_CE_I2S BIT(29) + static struct ingenic_cgu *cgu; static int x1830_usb_phy_enable(struct clk_hw *hw) @@ -89,6 +98,157 @@ static const struct clk_ops x1830_otg_phy_ops = { .is_enabled = x1830_usb_phy_is_enabled, }; +static u8 x1830_i2s_get_parent(struct clk_hw *hw) +{ + u32 i2scdr; + + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); + + return (i2scdr & I2SCDR_I2PCS_MASK) >> I2SCDR_I2PCS_SHIFT; +} + +static int x1830_i2s_set_parent(struct clk_hw *hw, u8 idx) +{ + writel(idx << I2SCDR_I2PCS_SHIFT, cgu->base + CGU_REG_I2SCDR); + + return 0; +} + +static unsigned long x1830_i2s_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned m, n; + u32 i2scdr; + + i2scdr = readl(cgu->base + CGU_REG_I2SCDR); + + m = (i2scdr & I2SCDR_I2SDIV_M_MASK) >> I2SCDR_I2SDIV_M_SHIFT; + n = (i2scdr & I2SCDR_I2SDIV_N_MASK) >> I2SCDR_I2SDIV_N_SHIFT; + + return div_u64((u64)parent_rate * m, n); +} + +static unsigned long x1830_i2s_calc(unsigned long rate, unsigned long parent_rate, + unsigned *pm, unsigned *pn) +{ + u64 curr_delta, curr_m, curr_n, delta, m, n; + + if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) { + m = 1; + n = parent_rate / rate; + goto out; + } + + delta = rate; + + /* + * The length of M is 9 bits, its value must be between 1 and 511. + * The length of N is 20 bits, its value must be between 2 and 1048575, + * and must not be less than 2 times of the value of M. + */ + for (curr_m = 511; curr_m >= 1; curr_m--) { + curr_n = parent_rate * curr_m; + curr_delta = do_div(curr_n, rate); + + if (curr_n < 2 * curr_m || curr_n > 1048575) + continue; + + if (curr_delta == 0) + break; + + if (curr_delta < delta) { + m = curr_m; + n = curr_n; + delta = curr_delta; + } + } + +out: + if (pm) + *pm = m; + if (pn) + *pn = n; + + return div_u64((u64)parent_rate * m, n); +} + +static long x1830_i2s_round_rate(struct clk_hw *hw, unsigned long req_rate, + unsigned long *prate) +{ + return x1830_i2s_calc(req_rate, *prate, NULL, NULL); +} + +static int x1830_i2s_set_rate(struct clk_hw *hw, unsigned long req_rate, + unsigned long parent_rate) +{ + unsigned long rate; + unsigned m, n; + u32 ctl; + + /* + * The parent clock rate of I2S must not be lower than 2 times + * of the target clock rate. + */ + if (parent_rate < 2 * req_rate) + return -EINVAL; + + rate = x1830_i2s_calc(req_rate, parent_rate, &m, &n); + if (rate != req_rate) + pr_info("%s: request I2S rate %luHz, actual %luHz\n", __func__, + req_rate, rate); + + ctl = readl(cgu->base + CGU_REG_I2SCDR); + ctl &= ~I2SCDR_I2SDIV_M_MASK; + ctl |= m << I2SCDR_I2SDIV_M_SHIFT; + ctl &= ~I2SCDR_I2SDIV_N_MASK; + ctl |= n << I2SCDR_I2SDIV_N_SHIFT; + writel(ctl, cgu->base + CGU_REG_I2SCDR); + + return 0; +} + +static int x1830_i2s_enable(struct clk_hw *hw) +{ + u32 ctl; + + ctl = readl(cgu->base + CGU_REG_I2SCDR); + ctl |= I2SCDR_CE_I2S; + writel(ctl, cgu->base + CGU_REG_I2SCDR); + + return 0; +} + +static void x1830_i2s_disable(struct clk_hw *hw) +{ + u32 ctl; + + ctl = readl(cgu->base + CGU_REG_I2SCDR); + ctl &= ~I2SCDR_CE_I2S; + writel(ctl, cgu->base + CGU_REG_I2SCDR); +} + +static int x1830_i2s_is_enabled(struct clk_hw *hw) +{ + u32 ctl; + + ctl = readl(cgu->base + CGU_REG_I2SCDR); + + return !!(ctl & I2SCDR_CE_I2S); +} + +static const struct clk_ops x1830_i2s_ops = { + .get_parent = x1830_i2s_get_parent, + .set_parent = x1830_i2s_set_parent, + + .recalc_rate = x1830_i2s_recalc_rate, + .round_rate = x1830_i2s_round_rate, + .set_rate = x1830_i2s_set_rate, + + .enable = x1830_i2s_enable, + .disable = x1830_i2s_disable, + .is_enabled = x1830_i2s_is_enabled, +}; + static const s8 pll_od_encoding[64] = { 0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3, -1, -1, -1, -1, -1, -1, -1, 0x4, @@ -201,7 +361,7 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = { }, }, - /* Custom (SoC-specific) OTG PHY */ + /* Custom (SoC-specific) */ [X1830_CLK_OTGPHY] = { "otg_phy", CGU_CLK_CUSTOM, @@ -209,6 +369,13 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = { .custom = { &x1830_otg_phy_ops }, }, + [X1830_CLK_I2S] = { + "i2s", CGU_CLK_CUSTOM, + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, + X1830_CLK_VPLL, X1830_CLK_EPLL }, + .custom = { &x1830_i2s_ops }, + }, + /* Muxes & dividers */ [X1830_CLK_SCLKA] = { @@ -329,6 +496,14 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = { .mux = { CGU_REG_SSICDR, 29, 1 }, }, + [X1830_CLK_CIM] = { + "cim", CGU_CLK_MUX | CGU_CLK_DIV, + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL, + X1830_CLK_VPLL, X1830_CLK_EPLL }, + .mux = { CGU_REG_CIMCDR, 30, 2 }, + .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 }, + }, + [X1830_CLK_EXCLK_DIV512] = { "exclk_div512", CGU_CLK_FIXDIV, .parents = { X1830_CLK_EXCLK }, @@ -386,6 +561,18 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = { .gate = { CGU_REG_CLKGR0, 9 }, }, + [X1830_CLK_AIC] = { + "aic", CGU_CLK_GATE, + .parents = { X1830_CLK_EXCLK, -1, -1, -1 }, + .gate = { CGU_REG_CLKGR0, 11 }, + }, + + [X1830_CLK_DMIC] = { + "dmic", CGU_CLK_GATE, + .parents = { X1830_CLK_PCLK, -1, -1, -1 }, + .gate = { CGU_REG_CLKGR0, 12 }, + }, + [X1830_CLK_UART0] = { "uart0", CGU_CLK_GATE, .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
Add CIM, AIC, DMIC clocks for the X1000 SoC, and CIM, AIC, DMIC, I2S clocks for the X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> --- drivers/clk/ingenic/x1000-cgu.c | 19 ++++ drivers/clk/ingenic/x1830-cgu.c | 189 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 207 insertions(+), 1 deletion(-)