| Message ID | 20201207215333.11586-1-weqaar.a.janjua@intel.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | selftests/bpf: xsk selftests | expand |
On 12/7/20 1:53 PM, Weqaar Janjua wrote: > This patch set adds AF_XDP selftests based on veth to selftests/bpf. > > # Topology: > # --------- > # ----------- > # _ | Process | _ > # / ----------- \ > # / | \ > # / | \ > # ----------- | ----------- > # | Thread1 | | | Thread2 | > # ----------- | ----------- > # | | | > # ----------- | ----------- > # | xskX | | | xskY | > # ----------- | ----------- > # | | | > # ----------- | ---------- > # | vethX | --------- | vethY | > # ----------- peer ---------- > # | | | > # namespaceX | namespaceY > > These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual > Ethernet interfaces. > > The test program contains two threads, each thread is single socket with > a unique UMEM. It validates in-order packet delivery and packet content > by sending packets to each other. > > Prerequisites setup by script test_xsk.sh: > > Set up veth interfaces as per the topology shown ^^: > * setup two veth interfaces and one namespace > ** veth<xxxx> in root namespace > ** veth<yyyy> in af_xdp<xxxx> namespace > ** namespace af_xdp<xxxx> > * create a spec file veth.spec that includes this run-time configuration > *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid > conflict with any existing interface > > Adds xsk framework test to validate veth xdp DRV and SKB modes. > > The following tests are provided: > > 1. AF_XDP SKB mode > Generic mode XDP is driver independent, used when the driver does > not have support for XDP. Works on any netdevice using sockets and > generic XDP path. XDP hook from netif_receive_skb(). > a. nopoll - soft-irq processing > b. poll - using poll() syscall > c. Socket Teardown > Create a Tx and a Rx socket, Tx from one socket, Rx on another. > Destroy both sockets, then repeat multiple times. Only nopoll mode > is used > d. Bi-directional Sockets > Configure sockets as bi-directional tx/rx sockets, sets up fill > and completion rings on each socket, tx/rx in both directions. > Only nopoll mode is used > > 2. AF_XDP DRV/Native mode > Works on any netdevice with XDP_REDIRECT support, driver dependent. > Processes packets before SKB allocation. Provides better performance > than SKB. Driver hook available just after DMA of buffer descriptor. > a. nopoll > b. poll > c. Socket Teardown > d. Bi-directional Sockets > * Only copy mode is supported because veth does not currently support > zero-copy mode > > Total tests: 8 > > Flow: > * Single process spawns two threads: Tx and Rx > * Each of these two threads attach to a veth interface within their > assigned namespaces > * Each thread creates one AF_XDP socket connected to a unique umem > for each veth interface > * Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy> > * Rx thread verifies if all 10k packets were received and delivered > in-order, and have the right content > > v2 changes: > * Move selftests/xsk to selftests/bpf > * Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile > > v3 changes: > * merge all test scripts test_xsk_*.sh into test_xsk.sh > > v4 changes: > * merge xsk_env.sh into xsk_prereqs.sh > * test_xsk.sh add cliarg -c for color-coded output > * test_xsk.sh PREREQUISITES disables IPv6 on veth interfaces > * test_xsk.sh PREREQUISITES adds xsk framework test > * test_xsk.sh is independently executable > * xdpxceiver.c Tx/Rx validates only IPv4 packets with TOS 0x9, ignores > others > > Structure of the patch set: > > Patch 1: Adds XSK selftests framework and test under selftests/bpf > Patch 2: Adds tests: SKB poll and nopoll mode, and mac-ip-udp debug > Patch 3: Adds tests: DRV poll and nopoll mode > Patch 4: Adds tests: SKB and DRV Socket Teardown > Patch 5: Adds tests: SKB and DRV Bi-directional Sockets > > Thanks: Weqaar > > Weqaar Janjua (5): > selftests/bpf: xsk selftests framework > selftests/bpf: xsk selftests - SKB POLL, NOPOLL > selftests/bpf: xsk selftests - DRV POLL, NOPOLL > selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV > selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV > > tools/testing/selftests/bpf/Makefile | 7 +- > tools/testing/selftests/bpf/test_xsk.sh | 259 +++++ > tools/testing/selftests/bpf/xdpxceiver.c | 1074 ++++++++++++++++++++ > tools/testing/selftests/bpf/xdpxceiver.h | 160 +++ > tools/testing/selftests/bpf/xsk_prereqs.sh | 135 +++ > 5 files changed, 1633 insertions(+), 2 deletions(-) > create mode 100755 tools/testing/selftests/bpf/test_xsk.sh > create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c > create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h > create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh All tests passed in my environment. Tested-by: Yonghong Song <yhs@fb.com>
On 2020-12-08 04:56, Yonghong Song wrote: > On 12/7/20 1:53 PM, Weqaar Janjua wrote: >> This patch set adds AF_XDP selftests based on veth to selftests/bpf. [...] > > All tests passed in my environment. > Tested-by: Yonghong Song <yhs@fb.com> > Thanks for the hard work, Weqaar! And thanks Yonghong for testing/feedback. From my perspective this is a good selftest base for AF_XDP, and something we can continue to build on. For the series: Acked-by: Björn Töpel <bjorn.topel@intel.com>
Hello: This series was applied to bpf/bpf-next.git (refs/heads/master): On Mon, 7 Dec 2020 21:53:28 +0000 you wrote: > This patch set adds AF_XDP selftests based on veth to selftests/bpf. > > # Topology: > # --------- > # ----------- > # _ | Process | _ > # / ----------- \ > # / | \ > # / | \ > # ----------- | ----------- > # | Thread1 | | | Thread2 | > # ----------- | ----------- > # | | | > # ----------- | ----------- > # | xskX | | | xskY | > # ----------- | ----------- > # | | | > # ----------- | ---------- > # | vethX | --------- | vethY | > # ----------- peer ---------- > # | | | > # namespaceX | namespaceY > > [...] Here is the summary with links: - [bpf-next,v4,1/5] selftests/bpf: xsk selftests framework https://git.kernel.org/bpf/bpf-next/c/a89052572ebb - [bpf-next,v4,2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL https://git.kernel.org/bpf/bpf-next/c/facb7cb2e909 - [bpf-next,v4,3/5] selftests/bpf: xsk selftests - DRV POLL, NOPOLL https://git.kernel.org/bpf/bpf-next/c/9103a8594d93 - [bpf-next,v4,4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV https://git.kernel.org/bpf/bpf-next/c/6674bf66560a - [bpf-next,v4,5/5] selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV https://git.kernel.org/bpf/bpf-next/c/7d20441eb05e You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
This patch set adds AF_XDP selftests based on veth to selftests/bpf. # Topology: # --------- # ----------- # _ | Process | _ # / ----------- \ # / | \ # / | \ # ----------- | ----------- # | Thread1 | | | Thread2 | # ----------- | ----------- # | | | # ----------- | ----------- # | xskX | | | xskY | # ----------- | ----------- # | | | # ----------- | ---------- # | vethX | --------- | vethY | # ----------- peer ---------- # | | | # namespaceX | namespaceY These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual Ethernet interfaces. The test program contains two threads, each thread is single socket with a unique UMEM. It validates in-order packet delivery and packet content by sending packets to each other. Prerequisites setup by script test_xsk.sh: Set up veth interfaces as per the topology shown ^^: * setup two veth interfaces and one namespace ** veth<xxxx> in root namespace ** veth<yyyy> in af_xdp<xxxx> namespace ** namespace af_xdp<xxxx> * create a spec file veth.spec that includes this run-time configuration *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid conflict with any existing interface Adds xsk framework test to validate veth xdp DRV and SKB modes. The following tests are provided: 1. AF_XDP SKB mode Generic mode XDP is driver independent, used when the driver does not have support for XDP. Works on any netdevice using sockets and generic XDP path. XDP hook from netif_receive_skb(). a. nopoll - soft-irq processing b. poll - using poll() syscall c. Socket Teardown Create a Tx and a Rx socket, Tx from one socket, Rx on another. Destroy both sockets, then repeat multiple times. Only nopoll mode is used d. Bi-directional Sockets Configure sockets as bi-directional tx/rx sockets, sets up fill and completion rings on each socket, tx/rx in both directions. Only nopoll mode is used 2. AF_XDP DRV/Native mode Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes packets before SKB allocation. Provides better performance than SKB. Driver hook available just after DMA of buffer descriptor. a. nopoll b. poll c. Socket Teardown d. Bi-directional Sockets * Only copy mode is supported because veth does not currently support zero-copy mode Total tests: 8 Flow: * Single process spawns two threads: Tx and Rx * Each of these two threads attach to a veth interface within their assigned namespaces * Each thread creates one AF_XDP socket connected to a unique umem for each veth interface * Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy> * Rx thread verifies if all 10k packets were received and delivered in-order, and have the right content v2 changes: * Move selftests/xsk to selftests/bpf * Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile v3 changes: * merge all test scripts test_xsk_*.sh into test_xsk.sh v4 changes: * merge xsk_env.sh into xsk_prereqs.sh * test_xsk.sh add cliarg -c for color-coded output * test_xsk.sh PREREQUISITES disables IPv6 on veth interfaces * test_xsk.sh PREREQUISITES adds xsk framework test * test_xsk.sh is independently executable * xdpxceiver.c Tx/Rx validates only IPv4 packets with TOS 0x9, ignores others Structure of the patch set: Patch 1: Adds XSK selftests framework and test under selftests/bpf Patch 2: Adds tests: SKB poll and nopoll mode, and mac-ip-udp debug Patch 3: Adds tests: DRV poll and nopoll mode Patch 4: Adds tests: SKB and DRV Socket Teardown Patch 5: Adds tests: SKB and DRV Bi-directional Sockets Thanks: Weqaar Weqaar Janjua (5): selftests/bpf: xsk selftests framework selftests/bpf: xsk selftests - SKB POLL, NOPOLL selftests/bpf: xsk selftests - DRV POLL, NOPOLL selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV tools/testing/selftests/bpf/Makefile | 7 +- tools/testing/selftests/bpf/test_xsk.sh | 259 +++++ tools/testing/selftests/bpf/xdpxceiver.c | 1074 ++++++++++++++++++++ tools/testing/selftests/bpf/xdpxceiver.h | 160 +++ tools/testing/selftests/bpf/xsk_prereqs.sh | 135 +++ 5 files changed, 1633 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/bpf/test_xsk.sh create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh