Message ID | 20201202040840.663578-3-badhri@google.com (mailing list archive) |
---|---|
State | Accepted |
Commit | 0fbb7d06d3783ad9dac063bf2c956f176d57e657 |
Headers | show |
Series | [v2,1/3] usb: typec: tcpm: Introduce vsafe0v for vbus | expand |
On Tue, Dec 01, 2020 at 08:08:40PM -0800, Badhri Jagan Sridharan wrote: > Unmask EXTENDED_STATUS_MASK.vSafe0V, ALERT.Extended_Status > and set vbus_vsafe0v to enable VSAFE0V signalling. > > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > Changes since v1: > - Setting auto_discharge_disconnect to true instead of 1 as > suggested by Guenter. > --- > drivers/usb/typec/tcpm/tcpci_maxim.c | 16 +++++++++++++++- > 1 file changed, 15 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c > index c1797239bf08..319266329b42 100644 > --- a/drivers/usb/typec/tcpm/tcpci_maxim.c > +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c > @@ -112,11 +112,18 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip) > return; > } > > + /* Enable VSAFE0V detection */ > + ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V); > + if (ret < 0) { > + dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret); > + return; > + } > + > alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | > TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | > TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | > /* Enable Extended alert for detecting Fast Role Swap Signal */ > - TCPC_ALERT_EXTND; > + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS; > > ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); > if (ret < 0) { > @@ -315,6 +322,12 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) > } > } > > + if (status & TCPC_ALERT_EXTENDED_STATUS) { > + ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)®_status); > + if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V)) > + tcpm_vbus_change(chip->port); > + } > + > if (status & TCPC_ALERT_RX_STATUS) > process_rx(chip, status); > > @@ -442,6 +455,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id > chip->data.init = tcpci_init; > chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus; > chip->data.auto_discharge_disconnect = true; > + chip->data.vbus_vsafe0v = true; > > max_tcpci_init_regs(chip); > chip->tcpci = tcpci_register_port(chip->dev, &chip->data); > -- > 2.29.2.576.ga3fc446d84-goog
On Tue, Dec 01, 2020 at 08:08:40PM -0800, Badhri Jagan Sridharan wrote: > Unmask EXTENDED_STATUS_MASK.vSafe0V, ALERT.Extended_Status > and set vbus_vsafe0v to enable VSAFE0V signalling. > > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Changes since v1: > - Setting auto_discharge_disconnect to true instead of 1 as > suggested by Guenter. > --- > drivers/usb/typec/tcpm/tcpci_maxim.c | 16 +++++++++++++++- > 1 file changed, 15 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c > index c1797239bf08..319266329b42 100644 > --- a/drivers/usb/typec/tcpm/tcpci_maxim.c > +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c > @@ -112,11 +112,18 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip) > return; > } > > + /* Enable VSAFE0V detection */ > + ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V); > + if (ret < 0) { > + dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret); > + return; > + } > + > alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | > TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | > TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | > /* Enable Extended alert for detecting Fast Role Swap Signal */ > - TCPC_ALERT_EXTND; > + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS; > > ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); > if (ret < 0) { > @@ -315,6 +322,12 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) > } > } > > + if (status & TCPC_ALERT_EXTENDED_STATUS) { > + ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)®_status); > + if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V)) > + tcpm_vbus_change(chip->port); > + } > + > if (status & TCPC_ALERT_RX_STATUS) > process_rx(chip, status); > > @@ -442,6 +455,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id > chip->data.init = tcpci_init; > chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus; > chip->data.auto_discharge_disconnect = true; > + chip->data.vbus_vsafe0v = true; > > max_tcpci_init_regs(chip); > chip->tcpci = tcpci_register_port(chip->dev, &chip->data); > -- > 2.29.2.576.ga3fc446d84-goog >
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c index c1797239bf08..319266329b42 100644 --- a/drivers/usb/typec/tcpm/tcpci_maxim.c +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c @@ -112,11 +112,18 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip) return; } + /* Enable VSAFE0V detection */ + ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V); + if (ret < 0) { + dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret); + return; + } + alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | /* Enable Extended alert for detecting Fast Role Swap Signal */ - TCPC_ALERT_EXTND; + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS; ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); if (ret < 0) { @@ -315,6 +322,12 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) } } + if (status & TCPC_ALERT_EXTENDED_STATUS) { + ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)®_status); + if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V)) + tcpm_vbus_change(chip->port); + } + if (status & TCPC_ALERT_RX_STATUS) process_rx(chip, status); @@ -442,6 +455,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id chip->data.init = tcpci_init; chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus; chip->data.auto_discharge_disconnect = true; + chip->data.vbus_vsafe0v = true; max_tcpci_init_regs(chip); chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
Unmask EXTENDED_STATUS_MASK.vSafe0V, ALERT.Extended_Status and set vbus_vsafe0v to enable VSAFE0V signalling. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> --- Changes since v1: - Setting auto_discharge_disconnect to true instead of 1 as suggested by Guenter. --- drivers/usb/typec/tcpm/tcpci_maxim.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)