[GIT,PULL] ARM: mvebu: dt for v5.11 (#1)

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git tags/mvebu-dt-5.11-1

Message

Gregory CLEMENT Nov. 30, 2020, 4 p.m. UTC

Hi,

Here is the first pull request for dt for mvebu for v5.11.

Gregory

The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:

  Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git tags/mvebu-dt-5.11-1

for you to fetch changes up to 51b632c713d50586a844259c56048a280f375406:

  ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board (2020-11-30 15:26:01 +0100)

----------------------------------------------------------------
mvebu dt for 5.11 (part 1)

 - Add support for MikroTik CRS3xx switches
 - Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected
   to Prestera AC3X ASIC through PCI
 - Clean-up kirkwood device tree: replace "ok" by "okay"
 - Improve device tree for PCA953x gpio expander nodes
 - Use compliant node name for USB3 on armada 375
 - 98dx3236 SoCs:
    - remove non-existent i2c1
    - add i2c0 pinctrl information
 - Improve device tree for Turris Omnia

----------------------------------------------------------------
Adrian Schmutzler (1):
      ARM: dts: kirkwood: replace status value "ok" by "okay"

Aryan Srivastava (1):
      ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board

Chris Packham (2):
      ARM: dts: Remove non-existent i2c1 from 98dx3236
      ARM: dts: Add i2c0 pinctrl information for 98dx3236

Krzysztof Kozlowski (2):
      ARM: dts: dove: fix PCA95xx GPIO expander properties on A510
      ARM: dts: armada: align GPIO hog names with dtschema

Luka Kovacic (3):
      ARM: dts: mvebu: Add CRS326-24G-2S board
      ARM: dts: mvebu: Add CRS305-1G-4S board
      ARM: dts: mvebu: Add CRS328-4C-20S-4S board

Marek Behún (7):
      ARM: dts: turris-omnia: enable HW buffer management
      ARM: dts: turris-omnia: add comphy handle to eth2
      ARM: dts: turris-omnia: describe switch interrupt
      ARM: dts: turris-omnia: add SFP node
      ARM: dts: turris-omnia: add LED controller node
      ARM: dts: turris-omnia: update ethernet-phy node and handle name
      ARM: dts: turris-omnia: remove unneeded status = "okay" properties

Serge Semin (1):
      arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name

 arch/arm/boot/dts/Makefile                         |   7 +
 arch/arm/boot/dts/armada-375.dtsi                  |   2 +-
 arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts  | 112 +++++++++++++
 arch/arm/boot/dts/armada-385-turris-omnia.dts      | 179 ++++++++++++++++++++-
 arch/arm/boot/dts/armada-388-clearfog.dts          |   4 +-
 arch/arm/boot/dts/armada-388-clearfog.dtsi         |  10 +-
 arch/arm/boot/dts/armada-388-helios4.dts           |   6 +-
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi          |  12 +-
 arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts   |  43 +++++
 arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts       |  17 ++
 arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi      | 104 ++++++++++++
 arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts  |  43 +++++
 arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts      |  17 ++
 arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi     | 104 ++++++++++++
 .../boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts    |  43 +++++
 arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts   |  17 ++
 arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi  | 104 ++++++++++++
 arch/arm/boot/dts/dove-sbc-a510.dts                |   1 +
 arch/arm/boot/dts/kirkwood-dockstar.dts            |   2 +-
 arch/arm/boot/dts/kirkwood-dreamplug.dts           |   2 +-
 arch/arm/boot/dts/kirkwood-goflexnet.dts           |   2 +-
 .../arm/boot/dts/kirkwood-guruplug-server-plus.dts |   2 +-
 arch/arm/boot/dts/kirkwood-iconnect.dts            |   2 +-
 arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts      |   2 +-
 arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi      |   2 +-
 arch/arm/boot/dts/kirkwood.dtsi                    |   4 +-
 26 files changed, 810 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
 create mode 100644 arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
 create mode 100644 arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi

Comments

Arnd Bergmann Dec. 8, 2020, 11:09 p.m. UTC | #1

From: Arnd Bergmann <[e-mail]>

On Mon, 30 Nov 2020 17:00:32 +0100, Gregory CLEMENT wrote:
> Here is the first pull request for dt for mvebu for v5.11.
> 
> Gregory
> 
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
>   Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
> 
> [...]

Merged into arm/dt, thanks!

merge commit: 9bc08aa60f56748a06814f4f1366522a483c57cf

       Arnd

[e-mail] Dec. 8, 2020, 11:50 p.m. UTC | #2

Hello:

This pull request was applied to soc/soc.git (refs/heads/for-next):

On Mon, 30 Nov 2020 17:00:32 +0100 you wrote:
> Hi,
> 
> Here is the first pull request for dt for mvebu for v5.11.
> 
> Gregory
> 
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] ARM: mvebu: dt for v5.11 (#1)
    https://git.kernel.org/soc/soc/c/9bc08aa60f56

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html