| Message ID | 20201209194212.5131-9-tusharsu@linux.microsoft.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Mike Snitzer |
| Headers | show |
| Series | IMA: support for measuring kernel integrity critical data | expand |
On 2020-12-09 11:42:12, Tushar Sugandhi wrote: > From: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > > IMA measures files and buffer data such as keys, command line arguments > passed to the kernel on kexec system call, etc. While these measurements > enable monitoring and validating the integrity of the system, it is not > sufficient. Various data structures, policies and states stored in kernel > memory also impact the integrity of the system. Updates to these data > structures would have an impact on the security functionalities. This is repetitive when looking at the entire series. I think it can be dropped. > For example, SELinux stores the active policy in memory. Changes to this Start here and drop the "For example, ": SELinux stores the active policy in memory and changes to this data ... > data at runtime would have an impact on the security guarantees provided > by SELinux. Measuring such in-memory data structures through IMA > subsystem provides a secure way for a remote attestation service to > know the state of the system and also the runtime changes in the state > of the system. > > SELinux policy is a critical data for this security module that needs SELinux policy is critical data and should be measured. This measurement ... > to be measured. This measurement can be used by an attestation service, > for instance, to verify if the policy has been setup correctly and that > it hasn't been tampered at run-time. > > Measure the hash of the loaded policy by calling the IMA hook > ima_measure_critical_data(). Since the size of the loaded policy can > be large (several MB), measure the hash of the policy instead of > the entire policy to avoid bloating the IMA log entry. > > Add "selinux" to the list of supported data sources maintained by IMA > to enable measuring SELinux data. > > To enable SELinux data measurement, the following steps are required: > > 1, Add "ima_policy=critical_data" to the kernel command line arguments > to enable measuring SELinux data at boot time. > For example, > BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data > > 2, Add the following rule to /etc/ima/ima-policy > measure func=CRITICAL_DATA data_source=selinux > > Sample measurement of the hash of SELinux policy: > > To verify the measured data with the current SELinux policy run > the following commands and verify the output hash values match. > > sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 > > grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 > > Note that the actual verification of SELinux policy would require loading > the expected policy into an identical kernel on a pristine/known-safe > system and run the sha256sum /sys/kernel/selinux/policy there to get > the expected hash. > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> > --- > Documentation/ABI/testing/ima_policy | 3 +- > security/selinux/Makefile | 2 + > security/selinux/include/security.h | 11 +++- > security/selinux/measure.c | 86 ++++++++++++++++++++++++++++ > security/selinux/ss/services.c | 71 ++++++++++++++++++++--- > 5 files changed, 162 insertions(+), 11 deletions(-) > create mode 100644 security/selinux/measure.c > > diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy > index 0f4ee9e0a455..7c7023f7986b 100644 > --- a/Documentation/ABI/testing/ima_policy > +++ b/Documentation/ABI/testing/ima_policy > @@ -52,8 +52,9 @@ Description: > template:= name of a defined IMA template type > (eg, ima-ng). Only valid when action is "measure". > pcr:= decimal value > - data_source:= [label] > + data_source:= [selinux]|[label] > label:= a unique string used for grouping and limiting critical data. > + For example, "selinux" to measure critical data for SELinux. > > default policy: > # PROC_SUPER_MAGIC > diff --git a/security/selinux/Makefile b/security/selinux/Makefile > index 4d8e0e8adf0b..83d512116341 100644 > --- a/security/selinux/Makefile > +++ b/security/selinux/Makefile > @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o > > selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o > > +selinux-$(CONFIG_IMA) += measure.o > + > ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include > > $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h > diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h > index 3cc8bab31ea8..18ee65c98446 100644 > --- a/security/selinux/include/security.h > +++ b/security/selinux/include/security.h > @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, > struct selinux_policy *policy); > int security_read_policy(struct selinux_state *state, > void **data, size_t *len); > - > +int security_read_policy_kernel(struct selinux_state *state, > + void **data, size_t *len); > int security_policycap_supported(struct selinux_state *state, > unsigned int req_cap); > > @@ -446,4 +447,12 @@ extern void ebitmap_cache_init(void); > extern void hashtab_cache_init(void); > extern int security_sidtab_hash_stats(struct selinux_state *state, char *page); > > +#ifdef CONFIG_IMA > +extern void selinux_measure_state(struct selinux_state *selinux_state); > +#else > +static inline void selinux_measure_state(struct selinux_state *selinux_state) > +{ > +} > +#endif > + > #endif /* _SELINUX_SECURITY_H_ */ > diff --git a/security/selinux/measure.c b/security/selinux/measure.c > new file mode 100644 > index 000000000000..c409ada6ea39 > --- /dev/null > +++ b/security/selinux/measure.c > @@ -0,0 +1,86 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Measure SELinux state using IMA subsystem. > + */ > +#include <linux/vmalloc.h> > +#include <linux/ktime.h> > +#include <linux/ima.h> > +#include "security.h" > + > +/* > + * This function creates a unique name by appending the timestamp to > + * the given string. This string is passed as "event_name" to the IMA > + * hook to measure the given SELinux data. > + * > + * The data provided by SELinux to the IMA subsystem for measuring may have > + * already been measured (for instance the same state existed earlier). > + * But for SELinux the current data represents a state change and hence > + * needs to be measured again. To enable this, pass a unique "event_name" > + * to the IMA hook so that IMA subsystem will always measure the given data. > + * > + * For example, > + * At time T0 SELinux data to be measured is "foo". IMA measures it. > + * At time T1 the data is changed to "bar". IMA measures it. > + * At time T2 the data is changed to "foo" again. IMA will not measure it > + * (since it was already measured) unless the event_name, for instance, > + * is different in this call. > + */ > +static char *selinux_event_name(const char *name_prefix) > +{ > + char *event_name = NULL; > + struct timespec64 cur_time; > + > + ktime_get_real_ts64(&cur_time); > + event_name = kasprintf(GFP_KERNEL, "%s-%lld:%09ld", name_prefix, > + cur_time.tv_sec, cur_time.tv_nsec); > + if (!event_name) { > + pr_err("%s: event name not allocated.\n", __func__); > + return NULL; > + } > + > + return event_name; > +} > + > +/* > + * selinux_measure_state - Measure hash of the SELinux policy > + * > + * @state: selinux state struct > + * > + * NOTE: This function must be called with policy_mutex held. > + */ > +void selinux_measure_state(struct selinux_state *state) > +{ > + void *policy = NULL; > + char *policy_event_name = NULL; > + size_t policy_len; > + int rc = 0; > + bool initialized = selinux_initialized(state); > + > + /* > + * Measure SELinux policy only after initialization is completed. > + */ > + if (!initialized) > + goto out; > + > + policy_event_name = selinux_event_name("selinux-policy-hash"); > + if (!policy_event_name) { > + pr_err("%s: Event name for policy not allocated.\n", > + __func__); If the kasprintf() in selinux_event_name() fails, we'll get two similar error messages saying that the event name could not be allocated. One of these error messages can be removed. > + rc = -ENOMEM; > + goto out; > + } > + > + rc = security_read_policy_kernel(state, &policy, &policy_len); > + if (rc) { > + pr_err("%s: Failed to read policy %d.\n", __func__, rc); The calls to pr_err() in this aren't quite following the style of the other error SELinux error messages. $ git grep pr_err security/selinux security/selinux/hooks.c: pr_err("SELinux: out of range capability %d\n", cap); security/selinux/hooks.c: pr_err("SELinux: unable to map context to SID" security/selinux/netlink.c: pr_err("SELinux: OOM in %s\n", __func__); security/selinux/selinuxfs.c: pr_err("SELinux: Runtime disable is deprecated, use selinux=0 on the kernel cmdline.\n"); security/selinux/selinuxfs.c: pr_err("SELinux: failed to load policy booleans\n"); security/selinux/selinuxfs.c: pr_err("SELinux: failed to load policy classes\n"); ... security/selinux/ss/services.c: pr_err("SELinux: %s: unrecognized SID %d\n", security/selinux/ss/services.c: pr_err("SELinux: %s: unrecognized SID %d\n", security/selinux/ss/services.c: pr_err("SELinux: %s: unrecognized SID %d\n", security/selinux/ss/services.c: pr_err("SELinux: %s: unrecognized SID %d\n", security/selinux/ss/services.c: pr_err("SELinux: %s: unrecognized class %s\n", Prepending your error message strings with "SELinux: " and lowercasing the first character after "%s: " ought to do it. All the other code changes in this patch look correct to me. Tyler > + goto out; > + } > + > + ima_measure_critical_data("selinux", policy_event_name, > + policy, policy_len, true); > + > + vfree(policy); > + > +out: > + kfree(policy_event_name); > +} > diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c > index 9704c8a32303..dfa2e00894ae 100644 > --- a/security/selinux/ss/services.c > +++ b/security/selinux/ss/services.c > @@ -2180,6 +2180,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, > selinux_status_update_policyload(state, seqno); > selinux_netlbl_cache_invalidate(); > selinux_xfrm_notify_policyload(); > + selinux_measure_state(state); > } > > void selinux_policy_commit(struct selinux_state *state, > @@ -3875,8 +3876,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, > } > #endif /* CONFIG_NETLABEL */ > > +/** > + * security_read_selinux_policy - read the policy. > + * @policy: SELinux policy > + * @data: binary policy data > + * @len: length of data in bytes > + * > + */ > +static int security_read_selinux_policy(struct selinux_policy *policy, > + void *data, size_t *len) > +{ > + int rc; > + struct policy_file fp; > + > + fp.data = data; > + fp.len = *len; > + > + rc = policydb_write(&policy->policydb, &fp); > + if (rc) > + return rc; > + > + *len = (unsigned long)fp.data - (unsigned long)data; > + return 0; > +} > + > /** > * security_read_policy - read the policy. > + * @state: selinux_state > * @data: binary policy data > * @len: length of data in bytes > * > @@ -3885,8 +3911,6 @@ int security_read_policy(struct selinux_state *state, > void **data, size_t *len) > { > struct selinux_policy *policy; > - int rc; > - struct policy_file fp; > > policy = rcu_dereference_protected( > state->policy, lockdep_is_held(&state->policy_mutex)); > @@ -3898,14 +3922,43 @@ int security_read_policy(struct selinux_state *state, > if (!*data) > return -ENOMEM; > > - fp.data = *data; > - fp.len = *len; > + return security_read_selinux_policy(policy, *data, len); > +} > > - rc = policydb_write(&policy->policydb, &fp); > - if (rc) > - return rc; > +/** > + * security_read_policy_kernel - read the policy. > + * @state: selinux_state > + * @data: binary policy data > + * @len: length of data in bytes > + * > + * Allocates kernel memory for reading SELinux policy. > + * This function is for internal use only and should not > + * be used for returning data to user space. > + * > + * This function must be called with policy_mutex held. > + */ > +int security_read_policy_kernel(struct selinux_state *state, > + void **data, size_t *len) > +{ > + struct selinux_policy *policy; > + int rc = 0; > > - *len = (unsigned long)fp.data - (unsigned long)*data; > - return 0; > + policy = rcu_dereference_protected( > + state->policy, lockdep_is_held(&state->policy_mutex)); > + if (!policy) { > + rc = -EINVAL; > + goto out; > + } > + > + *len = policy->policydb.len; > + *data = vmalloc(*len); > + if (!*data) { > + rc = -ENOMEM; > + goto out; > + } > > + rc = security_read_selinux_policy(policy, *data, len); > + > +out: > + return rc; > } > -- > 2.17.1 > -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On 2020-12-11 09:36:30, Tyler Hicks wrote: > The calls to pr_err() in this aren't quite following the style of the > other error SELinux error messages. Sorry, I left out a word. I meant to say that the calls to pr_err() in this *file* aren't quite following the right style. Please adjust all of them. Thanks! Tyler -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On 12/11/20 7:41 AM, Tyler Hicks wrote: > On 2020-12-11 09:36:30, Tyler Hicks wrote: >> The calls to pr_err() in this aren't quite following the style of the >> other error SELinux error messages. > > Sorry, I left out a word. I meant to say that the calls to pr_err() in > this *file* aren't quite following the right style. Please adjust all of > them. > > Thanks! > Thanks for reviewing the patch Tyler. I'll make the changes per your comments. -lakshmi -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 0f4ee9e0a455..7c7023f7986b 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -52,8 +52,9 @@ Description: template:= name of a defined IMA template type (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value - data_source:= [label] + data_source:= [selinux]|[label] label:= a unique string used for grouping and limiting critical data. + For example, "selinux" to measure critical data for SELinux. default policy: # PROC_SUPER_MAGIC diff --git a/security/selinux/Makefile b/security/selinux/Makefile index 4d8e0e8adf0b..83d512116341 100644 --- a/security/selinux/Makefile +++ b/security/selinux/Makefile @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o +selinux-$(CONFIG_IMA) += measure.o + ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index 3cc8bab31ea8..18ee65c98446 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, struct selinux_policy *policy); int security_read_policy(struct selinux_state *state, void **data, size_t *len); - +int security_read_policy_kernel(struct selinux_state *state, + void **data, size_t *len); int security_policycap_supported(struct selinux_state *state, unsigned int req_cap); @@ -446,4 +447,12 @@ extern void ebitmap_cache_init(void); extern void hashtab_cache_init(void); extern int security_sidtab_hash_stats(struct selinux_state *state, char *page); +#ifdef CONFIG_IMA +extern void selinux_measure_state(struct selinux_state *selinux_state); +#else +static inline void selinux_measure_state(struct selinux_state *selinux_state) +{ +} +#endif + #endif /* _SELINUX_SECURITY_H_ */ diff --git a/security/selinux/measure.c b/security/selinux/measure.c new file mode 100644 index 000000000000..c409ada6ea39 --- /dev/null +++ b/security/selinux/measure.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Measure SELinux state using IMA subsystem. + */ +#include <linux/vmalloc.h> +#include <linux/ktime.h> +#include <linux/ima.h> +#include "security.h" + +/* + * This function creates a unique name by appending the timestamp to + * the given string. This string is passed as "event_name" to the IMA + * hook to measure the given SELinux data. + * + * The data provided by SELinux to the IMA subsystem for measuring may have + * already been measured (for instance the same state existed earlier). + * But for SELinux the current data represents a state change and hence + * needs to be measured again. To enable this, pass a unique "event_name" + * to the IMA hook so that IMA subsystem will always measure the given data. + * + * For example, + * At time T0 SELinux data to be measured is "foo". IMA measures it. + * At time T1 the data is changed to "bar". IMA measures it. + * At time T2 the data is changed to "foo" again. IMA will not measure it + * (since it was already measured) unless the event_name, for instance, + * is different in this call. + */ +static char *selinux_event_name(const char *name_prefix) +{ + char *event_name = NULL; + struct timespec64 cur_time; + + ktime_get_real_ts64(&cur_time); + event_name = kasprintf(GFP_KERNEL, "%s-%lld:%09ld", name_prefix, + cur_time.tv_sec, cur_time.tv_nsec); + if (!event_name) { + pr_err("%s: event name not allocated.\n", __func__); + return NULL; + } + + return event_name; +} + +/* + * selinux_measure_state - Measure hash of the SELinux policy + * + * @state: selinux state struct + * + * NOTE: This function must be called with policy_mutex held. + */ +void selinux_measure_state(struct selinux_state *state) +{ + void *policy = NULL; + char *policy_event_name = NULL; + size_t policy_len; + int rc = 0; + bool initialized = selinux_initialized(state); + + /* + * Measure SELinux policy only after initialization is completed. + */ + if (!initialized) + goto out; + + policy_event_name = selinux_event_name("selinux-policy-hash"); + if (!policy_event_name) { + pr_err("%s: Event name for policy not allocated.\n", + __func__); + rc = -ENOMEM; + goto out; + } + + rc = security_read_policy_kernel(state, &policy, &policy_len); + if (rc) { + pr_err("%s: Failed to read policy %d.\n", __func__, rc); + goto out; + } + + ima_measure_critical_data("selinux", policy_event_name, + policy, policy_len, true); + + vfree(policy); + +out: + kfree(policy_event_name); +} diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index 9704c8a32303..dfa2e00894ae 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2180,6 +2180,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, selinux_status_update_policyload(state, seqno); selinux_netlbl_cache_invalidate(); selinux_xfrm_notify_policyload(); + selinux_measure_state(state); } void selinux_policy_commit(struct selinux_state *state, @@ -3875,8 +3876,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, } #endif /* CONFIG_NETLABEL */ +/** + * security_read_selinux_policy - read the policy. + * @policy: SELinux policy + * @data: binary policy data + * @len: length of data in bytes + * + */ +static int security_read_selinux_policy(struct selinux_policy *policy, + void *data, size_t *len) +{ + int rc; + struct policy_file fp; + + fp.data = data; + fp.len = *len; + + rc = policydb_write(&policy->policydb, &fp); + if (rc) + return rc; + + *len = (unsigned long)fp.data - (unsigned long)data; + return 0; +} + /** * security_read_policy - read the policy. + * @state: selinux_state * @data: binary policy data * @len: length of data in bytes * @@ -3885,8 +3911,6 @@ int security_read_policy(struct selinux_state *state, void **data, size_t *len) { struct selinux_policy *policy; - int rc; - struct policy_file fp; policy = rcu_dereference_protected( state->policy, lockdep_is_held(&state->policy_mutex)); @@ -3898,14 +3922,43 @@ int security_read_policy(struct selinux_state *state, if (!*data) return -ENOMEM; - fp.data = *data; - fp.len = *len; + return security_read_selinux_policy(policy, *data, len); +} - rc = policydb_write(&policy->policydb, &fp); - if (rc) - return rc; +/** + * security_read_policy_kernel - read the policy. + * @state: selinux_state + * @data: binary policy data + * @len: length of data in bytes + * + * Allocates kernel memory for reading SELinux policy. + * This function is for internal use only and should not + * be used for returning data to user space. + * + * This function must be called with policy_mutex held. + */ +int security_read_policy_kernel(struct selinux_state *state, + void **data, size_t *len) +{ + struct selinux_policy *policy; + int rc = 0; - *len = (unsigned long)fp.data - (unsigned long)*data; - return 0; + policy = rcu_dereference_protected( + state->policy, lockdep_is_held(&state->policy_mutex)); + if (!policy) { + rc = -EINVAL; + goto out; + } + + *len = policy->policydb.len; + *data = vmalloc(*len); + if (!*data) { + rc = -ENOMEM; + goto out; + } + rc = security_read_selinux_policy(policy, *data, len); + +out: + return rc; }