Message ID | 20201111153559.19050-13-kishon@ti.com (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Lorenzo Pieralisi |
Headers | show |
Series | Implement NTB Controller using multiple PCI EP | expand |
> -----Original Message----- > From: Kishon Vijay Abraham I <kishon@ti.com> > Sent: 11 November 2020 15:36 > > The number of functions supported by the endpoint controller is > configured in LM_EP_FUNC_CFG based on func_no member of struct > pci_epf. > Now that an endpoint function can be associated with two endpoint > controllers (primary and secondary), just using func_no will > not suffice as that will take into account only if the endpoint > controller is associated with the primary interface of endpoint > function. Instead use epc->function_num_map which will already have the > configured functions information (irrespective of whether the endpoint > controller is associated with primary or secondary interface). > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/pci/controller/cadence/pcie-cadence-ep.c | 7 +------ > 1 file changed, 1 insertion(+), 6 deletions(-) > Reviewed-by: Tom Joseph <tjoseph@cadence.com>
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index 1fe6b8baca97..4e4eb30cd1a2 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -506,18 +506,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc) struct cdns_pcie_ep *ep = epc_get_drvdata(epc); struct cdns_pcie *pcie = &ep->pcie; struct device *dev = pcie->dev; - struct pci_epf *epf; - u32 cfg; int ret; /* * BIT(0) is hardwired to 1, hence function 0 is always enabled * and can't be disabled anyway. */ - cfg = BIT(0); - list_for_each_entry(epf, &epc->pci_epf, list) - cfg |= BIT(epf->func_no); - cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg); + cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map); ret = cdns_pcie_start_link(pcie); if (ret) {
The number of functions supported by the endpoint controller is configured in LM_EP_FUNC_CFG based on func_no member of struct pci_epf. Now that an endpoint function can be associated with two endpoint controllers (primary and secondary), just using func_no will not suffice as that will take into account only if the endpoint controller is associated with the primary interface of endpoint function. Instead use epc->function_num_map which will already have the configured functions information (irrespective of whether the endpoint controller is associated with primary or secondary interface). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/pci/controller/cadence/pcie-cadence-ep.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)