@@ -2204,9 +2204,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
}
/* Enable PEC if the controller supports it */
- ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
- if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
- client->flags |= I2C_CLIENT_PEC;
+ if (!(data->flags & PMBUS_NO_CAPABILITY)) {
+ ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+ if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
+ client->flags |= I2C_CLIENT_PEC;
+ }
/*
* Check if the chip is write protected. If it is, we can not clear
@@ -34,6 +34,15 @@
*/
#define PMBUS_WRITE_PROTECTED BIT(1)
+/*
+ * PMBUS_NO_CAPABILITY
+ *
+ * Some PMBus chips don't respond with valid data when reading the CAPABILITY
+ * register. For such chips, this flag should be set so that the PMBus core
+ * driver doesn't use CAPABILITY to determine it's behavior.
+ */
+#define PMBUS_NO_CAPABILITY BIT(2)
+
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
Some PMBus chips don't respond with valid data when reading the CAPABILITY register. Add a flag that device drivers can set so that the PMBus core driver doesn't use CAPABILITY to determine it's behavior. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/hwmon/pmbus/pmbus_core.c | 8 +++++--- include/linux/pmbus.h | 9 +++++++++ 2 files changed, 14 insertions(+), 3 deletions(-)