| Message ID | 20201224170502.2254683-7-aford173@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | [V2,1/9] arm64: dts: renesas: beacon kit: Configure programmable clocks | expand |
Hi Adam, On Thu, Dec 24, 2020 at 6:05 PM Adam Ford <aford173@gmail.com> wrote: > Beacon EmebeddedWorks is introducing a new kit based on the > RZ/G2N SoC from Renesas. > > The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 > cellular radio. > > The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, > along with a variety of push buttons and LED's, and support for > a parallel RGB and an LVDS display. It uses the same baseboard > and SOM as the RZ/G2M. > > This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains > the base memory node, so an additional memory node isn't necessary. > > Signed-off-by: Adam Ford <aford173@gmail.com> > --- > V2: Add missing du node entries. Thanks for the update! Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in renesas-devel for v5.12. > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts > +/* Reference versaclock instead of audio_clk_a */ > +&rcar_sound { > + clocks = <&cpg CPG_MOD 1005>, > + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, > + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, > + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, > + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, > + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, > + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, > + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, > + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, > + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, > + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, > + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, > + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, > + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, > + <&versaclock6_bb 4>, <&audio_clk_b>, > + <&audio_clk_c>, > + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; BTW, r8a774[abe]1.dtsi define CPG_AUDIO_CLK_I. If you would use that instead of R8A774[ABE]1_CLK_S0D4, all rcar_sound clocks properties overrides would become identical, and you could consolidate them back in beacon-renesom-baseboard.dtsi. That can be done in a single patch on top later, though. > +}; Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index dffefe030a76..cf7e2f77e4ea 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts new file mode 100644 index 000000000000..71763f4402a7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774b1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon Embedded Works RZ/G2N Development Kit"; + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + serial6 = &scif4; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; +};
Beacon EmebeddedWorks is introducing a new kit based on the RZ/G2N SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. It uses the same baseboard and SOM as the RZ/G2M. This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains the base memory node, so an additional memory node isn't necessary. Signed-off-by: Adam Ford <aford173@gmail.com> --- V2: Add missing du node entries.