diff mbox series

[v12,1/4] dt-bindings: phy: Add sparx5-serdes bindings

Message ID 20210107091924.1569575-2-steen.hegelund@microchip.com (mailing list archive)
State Not Applicable
Headers show
Series Adding the Sparx5 Serdes driver | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: Steen.Hegelund@microchip.com linux-arm-kernel@lists.infradead.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 1 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Steen Hegelund Jan. 7, 2021, 9:19 a.m. UTC 
Document the Sparx5 ethernet serdes phy driver bindings.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 .../bindings/phy/microchip,sparx5-serdes.yaml | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml

Comments

Alexandre Belloni Jan. 14, 2021, 11:02 a.m. UTC | #1 
On 07/01/2021 10:19:21+0100, Steen Hegelund wrote:
> Document the Sparx5 ethernet serdes phy driver bindings.
> 
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  .../bindings/phy/microchip,sparx5-serdes.yaml | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
> new file mode 100644
> index 000000000000..bdbdb3bbddbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip Sparx5 Serdes controller
> +
> +maintainers:
> +  - Steen Hegelund <steen.hegelund@microchip.com>
> +
> +description: |
> +  The Sparx5 SERDES interfaces share the same basic functionality, but
> +  support different operating modes and line rates.
> +
> +  The following list lists the SERDES features:
> +
> +  * RX Adaptive Decision Feedback Equalizer (DFE)
> +  * Programmable continuous time linear equalizer (CTLE)
> +  * Rx variable gain control
> +  * Rx built-in fault detector (loss-of-lock/loss-of-signal)
> +  * Adjustable tx de-emphasis (FFE)
> +  * Tx output amplitude control
> +  * Supports rx eye monitor
> +  * Multiple loopback modes
> +  * Prbs generator and checker
> +  * Polarity inversion control
> +
> +  SERDES6G:
> +
> +  The SERDES6G is a high-speed SERDES interface, which can operate at
> +  the following data rates:
> +
> +  * 100 Mbps (100BASE-FX)
> +  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
> +  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
> +  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
> +
> +  SERDES10G
> +
> +  The SERDES10G is a high-speed SERDES interface, which can operate at
> +  the following data rates:
> +
> +  * 100 Mbps (100BASE-FX)
> +  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
> +  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
> +  * 5 Gbps (QSGMII/USGMII)
> +  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
> +  * 10 Gbps (10G-USGMII)
> +  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
> +
> +  SERDES25G
> +
> +  The SERDES25G is a high-speed SERDES interface, which can operate at
> +  the following data rates:
> +
> +  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
> +  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
> +  * 5 Gbps (QSGMII/USGMII)
> +  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
> +  * 10 Gbps (10G-USGMII)
> +  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
> +  * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
> +
> +properties:
> +  $nodename:
> +    pattern: "^serdes@[0-9a-f]+$"
> +
> +  compatible:
> +    const: microchip,sparx5-serdes
> +
> +  reg:
> +    minItems: 1
> +
> +  '#phy-cells':
> +    const: 1
> +    description: |
> +      - The main serdes input port
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#phy-cells'
> +  - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    serdes: serdes@10808000 {
> +      compatible = "microchip,sparx5-serdes";
> +      #phy-cells = <1>;
> +      clocks = <&sys_clk>;
> +      reg = <0x10808000 0x5d0000>;
> +    };
> +
> +...
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
new file mode 100644
index 000000000000..bdbdb3bbddbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
@@ -0,0 +1,100 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Serdes controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+
+description: |
+  The Sparx5 SERDES interfaces share the same basic functionality, but
+  support different operating modes and line rates.
+
+  The following list lists the SERDES features:
+
+  * RX Adaptive Decision Feedback Equalizer (DFE)
+  * Programmable continuous time linear equalizer (CTLE)
+  * Rx variable gain control
+  * Rx built-in fault detector (loss-of-lock/loss-of-signal)
+  * Adjustable tx de-emphasis (FFE)
+  * Tx output amplitude control
+  * Supports rx eye monitor
+  * Multiple loopback modes
+  * Prbs generator and checker
+  * Polarity inversion control
+
+  SERDES6G:
+
+  The SERDES6G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+
+  SERDES10G
+
+  The SERDES10G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+
+  SERDES25G
+
+  The SERDES25G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+  * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-serdes
+
+  reg:
+    minItems: 1
+
+  '#phy-cells':
+    const: 1
+    description: |
+      - The main serdes input port
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@10808000 {
+      compatible = "microchip,sparx5-serdes";
+      #phy-cells = <1>;
+      clocks = <&sys_clk>;
+      reg = <0x10808000 0x5d0000>;
+    };
+
+...