| Message ID | 20210119085546.725005-5-jckuo@nvidia.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Tegra XHCI controller ELPG support | expand |
On Tue, Jan 19, 2021 at 04:55:35PM +0800, JC Kuo wrote: > Once UPHY PLL hardware power sequencer is enabled, do not assert > reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken. > This commit removes reset_control_assert(pcie->rst) and > reset_control_assert(sata->rst) from PEX/SATA UPHY disable procedure. > > Signed-off-by: JC Kuo <jckuo@nvidia.com> > --- > v6: > no change > v5: > no change > v4: > no change > v3: > new, was a part of "phy: tegra: xusb: Rearrange UPHY init on Tegra210" > > drivers/phy/tegra/xusb-tegra210.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c > index 4dc9286ec1b8..9bfecdfecf35 100644 > --- a/drivers/phy/tegra/xusb-tegra210.c > +++ b/drivers/phy/tegra/xusb-tegra210.c > @@ -502,7 +502,6 @@ static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl) > if (--pcie->enable > 0) > return; > > - reset_control_assert(pcie->rst); > clk_disable_unprepare(pcie->pll); > } > > @@ -739,7 +738,6 @@ static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl) > if (--sata->enable > 0) > return; > > - reset_control_assert(sata->rst); > clk_disable_unprepare(sata->pll); > } Isn't this going to break things between here and patch 5 where the hardware sequencer is enabled? If so, it might be better to move this into patch 5 so that things stay functional and bisectible. Thierry
On 1/19/21 9:52 PM, Thierry Reding wrote: > On Tue, Jan 19, 2021 at 04:55:35PM +0800, JC Kuo wrote: >> Once UPHY PLL hardware power sequencer is enabled, do not assert >> reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken. >> This commit removes reset_control_assert(pcie->rst) and >> reset_control_assert(sata->rst) from PEX/SATA UPHY disable procedure. >> >> Signed-off-by: JC Kuo <jckuo@nvidia.com> >> --- >> v6: >> no change >> v5: >> no change >> v4: >> no change >> v3: >> new, was a part of "phy: tegra: xusb: Rearrange UPHY init on Tegra210" >> >> drivers/phy/tegra/xusb-tegra210.c | 2 -- >> 1 file changed, 2 deletions(-) >> >> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c >> index 4dc9286ec1b8..9bfecdfecf35 100644 >> --- a/drivers/phy/tegra/xusb-tegra210.c >> +++ b/drivers/phy/tegra/xusb-tegra210.c >> @@ -502,7 +502,6 @@ static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl) >> if (--pcie->enable > 0) >> return; >> >> - reset_control_assert(pcie->rst); >> clk_disable_unprepare(pcie->pll); >> } >> >> @@ -739,7 +738,6 @@ static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl) >> if (--sata->enable > 0) >> return; >> >> - reset_control_assert(sata->rst); >> clk_disable_unprepare(sata->pll); >> } > > Isn't this going to break things between here and patch 5 where the > hardware sequencer is enabled? If so, it might be better to move this > into patch 5 so that things stay functional and bisectible. Hi Thierry, Yes, I will move it into patch 5. Thanks, JC > > Thierry >
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index 4dc9286ec1b8..9bfecdfecf35 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -502,7 +502,6 @@ static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl) if (--pcie->enable > 0) return; - reset_control_assert(pcie->rst); clk_disable_unprepare(pcie->pll); } @@ -739,7 +738,6 @@ static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl) if (--sata->enable > 0) return; - reset_control_assert(sata->rst); clk_disable_unprepare(sata->pll); }
Once UPHY PLL hardware power sequencer is enabled, do not assert reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken. This commit removes reset_control_assert(pcie->rst) and reset_control_assert(sata->rst) from PEX/SATA UPHY disable procedure. Signed-off-by: JC Kuo <jckuo@nvidia.com> --- v6: no change v5: no change v4: no change v3: new, was a part of "phy: tegra: xusb: Rearrange UPHY init on Tegra210" drivers/phy/tegra/xusb-tegra210.c | 2 -- 1 file changed, 2 deletions(-)