| Message ID | 20210108145217.2254447-6-jean-philippe@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iommu: I/O page faults for SMMUv3 | expand |
On 2021/1/8 下午10:52, Jean-Philippe Brucker wrote: > The IOPF (I/O Page Fault) feature is now enabled independently from the > SVA feature, because some IOPF implementations are device-specific and > do not require IOMMU support for PCIe PRI or Arm SMMU stall. > > Enable IOPF unconditionally when enabling SVA for now. In the future, if > a device driver implementing a uacce interface doesn't need IOPF > support, it will need to tell the uacce module, for example with a new > flag. > > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > --- > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Zhangfei Gao <zhangfei.gao@linaro.org> > Cc: Zhou Wang <wangzhou1@hisilicon.com> Thanks Jean Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
On Fri, 8 Jan 2021 15:52:13 +0100 Jean-Philippe Brucker <jean-philippe@linaro.org> wrote: > The IOPF (I/O Page Fault) feature is now enabled independently from the > SVA feature, because some IOPF implementations are device-specific and > do not require IOMMU support for PCIe PRI or Arm SMMU stall. > > Enable IOPF unconditionally when enabling SVA for now. In the future, if > a device driver implementing a uacce interface doesn't need IOPF > support, it will need to tell the uacce module, for example with a new > flag. > > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Hi Jean-Philippe, A minor suggestion inline but I'm not that bothered so either way looks good to me. > --- > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Zhangfei Gao <zhangfei.gao@linaro.org> > Cc: Zhou Wang <wangzhou1@hisilicon.com> > --- > drivers/misc/uacce/uacce.c | 32 +++++++++++++++++++++++++------- > 1 file changed, 25 insertions(+), 7 deletions(-) > > diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c > index d07af4edfcac..41ef1eb62a14 100644 > --- a/drivers/misc/uacce/uacce.c > +++ b/drivers/misc/uacce/uacce.c > @@ -385,6 +385,24 @@ static void uacce_release(struct device *dev) > kfree(uacce); > } > > +static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags) > +{ > + if (!(flags & UACCE_DEV_SVA)) > + return flags; > + > + flags &= ~UACCE_DEV_SVA; > + > + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF)) > + return flags; > + > + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) { > + iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF); > + return flags; > + } > + > + return flags | UACCE_DEV_SVA; > +} I'm a great fan of paired enable / disable functions. Whilst it would be trivial, maybe it is worth introducing uacce_disable_sva()? Also make that do the flags check internally to make it match up with the enable path. > + > /** > * uacce_alloc() - alloc an accelerator > * @parent: pointer of uacce parent device > @@ -404,11 +422,7 @@ struct uacce_device *uacce_alloc(struct device *parent, > if (!uacce) > return ERR_PTR(-ENOMEM); > > - if (flags & UACCE_DEV_SVA) { > - ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA); > - if (ret) > - flags &= ~UACCE_DEV_SVA; > - } > + flags = uacce_enable_sva(parent, flags); > > uacce->parent = parent; > uacce->flags = flags; > @@ -432,8 +446,10 @@ struct uacce_device *uacce_alloc(struct device *parent, > return uacce; > > err_with_uacce: > - if (flags & UACCE_DEV_SVA) > + if (flags & UACCE_DEV_SVA) { > iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); > + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); > + } > kfree(uacce); > return ERR_PTR(ret); > } > @@ -487,8 +503,10 @@ void uacce_remove(struct uacce_device *uacce) > mutex_unlock(&uacce->queues_lock); > > /* disable sva now since no opened queues */ > - if (uacce->flags & UACCE_DEV_SVA) > + if (uacce->flags & UACCE_DEV_SVA) { > iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); > + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); > + } > > if (uacce->cdev) > cdev_device_del(uacce->cdev, &uacce->dev);
On Tue, Jan 19, 2021 at 12:27:59PM +0000, Jonathan Cameron wrote: > On Fri, 8 Jan 2021 15:52:13 +0100 > Jean-Philippe Brucker <jean-philippe@linaro.org> wrote: > > > The IOPF (I/O Page Fault) feature is now enabled independently from the > > SVA feature, because some IOPF implementations are device-specific and > > do not require IOMMU support for PCIe PRI or Arm SMMU stall. > > > > Enable IOPF unconditionally when enabling SVA for now. In the future, if > > a device driver implementing a uacce interface doesn't need IOPF > > support, it will need to tell the uacce module, for example with a new > > flag. > > > > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > Hi Jean-Philippe, > > A minor suggestion inline but I'm not that bothered so either way > looks good to me. No problem, I'll add the disable function Thanks, Jean
On 1/8/2021 7:52 AM, Jean-Philippe Brucker wrote: > The IOPF (I/O Page Fault) feature is now enabled independently from the > SVA feature, because some IOPF implementations are device-specific and > do not require IOMMU support for PCIe PRI or Arm SMMU stall. > > Enable IOPF unconditionally when enabling SVA for now. In the future, if > a device driver implementing a uacce interface doesn't need IOPF > support, it will need to tell the uacce module, for example with a new > flag. > > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> > --- > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Zhangfei Gao <zhangfei.gao@linaro.org> > Cc: Zhou Wang <wangzhou1@hisilicon.com> > --- > drivers/misc/uacce/uacce.c | 32 +++++++++++++++++++++++++------- > 1 file changed, 25 insertions(+), 7 deletions(-) > > diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c > index d07af4edfcac..41ef1eb62a14 100644 > --- a/drivers/misc/uacce/uacce.c > +++ b/drivers/misc/uacce/uacce.c > @@ -385,6 +385,24 @@ static void uacce_release(struct device *dev) > kfree(uacce); > } > > +static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags) > +{ > + if (!(flags & UACCE_DEV_SVA)) > + return flags; > + > + flags &= ~UACCE_DEV_SVA; > + > + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF)) > + return flags; > + > + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) { > + iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF); > + return flags; > + } Sorry to jump in a bit late on this and not specifically towards the intent of this patch. But I'd like to start a discussion on if we want to push the iommu dev feature enabling to the device driver itself rather than having UACCE control this? Maybe allow the device driver to manage the feature bits and UACCE only verify that they are enabled? 1. The device driver knows what platform it's on and what specific feature bits its devices supports. Maybe in the future if there are feature bits that's needed on one platform and not on another? 2. This allows the possibility of multiple uacce device registered to 1 pci dev, which for a device with asymmetric queues (Intel DSA/idxd driver) that is desirable feature. The current setup forces a single uacce device per pdev. If additional uacce devs are registered, the first removal of uacce device will disable the feature bit for the rest of the registered devices. With uacce managing the feature bit, it would need to add device context to the parent pdev and ref counting. It may be cleaner to just allow device driver to manage the feature bits and the driver should have all the information on when the feature needs to be turned on and off. - DaveJ > + > + return flags | UACCE_DEV_SVA; > +} > + > /** > * uacce_alloc() - alloc an accelerator > * @parent: pointer of uacce parent device > @@ -404,11 +422,7 @@ struct uacce_device *uacce_alloc(struct device *parent, > if (!uacce) > return ERR_PTR(-ENOMEM); > > - if (flags & UACCE_DEV_SVA) { > - ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA); > - if (ret) > - flags &= ~UACCE_DEV_SVA; > - } > + flags = uacce_enable_sva(parent, flags); > > uacce->parent = parent; > uacce->flags = flags; > @@ -432,8 +446,10 @@ struct uacce_device *uacce_alloc(struct device *parent, > return uacce; > > err_with_uacce: > - if (flags & UACCE_DEV_SVA) > + if (flags & UACCE_DEV_SVA) { > iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); > + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); > + } > kfree(uacce); > return ERR_PTR(ret); > } > @@ -487,8 +503,10 @@ void uacce_remove(struct uacce_device *uacce) > mutex_unlock(&uacce->queues_lock); > > /* disable sva now since no opened queues */ > - if (uacce->flags & UACCE_DEV_SVA) > + if (uacce->flags & UACCE_DEV_SVA) { > iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); > + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); > + } > > if (uacce->cdev) > cdev_device_del(uacce->cdev, &uacce->dev);
On 2021/1/21 4:47, Dave Jiang wrote: > > On 1/8/2021 7:52 AM, Jean-Philippe Brucker wrote: >> The IOPF (I/O Page Fault) feature is now enabled independently from the >> SVA feature, because some IOPF implementations are device-specific and >> do not require IOMMU support for PCIe PRI or Arm SMMU stall. >> >> Enable IOPF unconditionally when enabling SVA for now. In the future, if >> a device driver implementing a uacce interface doesn't need IOPF >> support, it will need to tell the uacce module, for example with a new >> flag. >> >> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> >> --- >> Cc: Arnd Bergmann <arnd@arndb.de> >> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> >> Cc: Zhou Wang <wangzhou1@hisilicon.com> >> --- >> drivers/misc/uacce/uacce.c | 32 +++++++++++++++++++++++++------- >> 1 file changed, 25 insertions(+), 7 deletions(-) >> >> diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c >> index d07af4edfcac..41ef1eb62a14 100644 >> --- a/drivers/misc/uacce/uacce.c >> +++ b/drivers/misc/uacce/uacce.c >> @@ -385,6 +385,24 @@ static void uacce_release(struct device *dev) >> kfree(uacce); >> } >> +static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags) >> +{ >> + if (!(flags & UACCE_DEV_SVA)) >> + return flags; >> + >> + flags &= ~UACCE_DEV_SVA; >> + >> + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF)) >> + return flags; >> + >> + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) { >> + iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF); >> + return flags; >> + } > > Sorry to jump in a bit late on this and not specifically towards the > intent of this patch. But I'd like to start a discussion on if we want > to push the iommu dev feature enabling to the device driver itself rather > than having UACCE control this? Maybe allow the device driver to manage > the feature bits and UACCE only verify that they are enabled? > > 1. The device driver knows what platform it's on and what specific > feature bits its devices supports. Maybe in the future if there are > feature bits that's needed on one platform and not on another? Hi Dave, From the discussion in this series, the meaning of IOMMU_DEV_FEAT_IOPF here is the IOPF capability of iommu device itself. So I think check it in UACCE will be fine. > 2. This allows the possibility of multiple uacce device registered to 1 > pci dev, which for a device with asymmetric queues (Intel DSA/idxd > driver) that is desirable feature. The current setup forces a single > uacce device per pdev. If additional uacce devs are registered, the > first removal of uacce device will disable the feature bit for the > rest of the registered devices. With uacce managing the feature bit, > it would need to add device context to the parent pdev and ref > counting. It may be cleaner to just allow device driver to manage > the feature bits and the driver should have all the information on > when the feature needs to be turned on and off. Yes, we have this problem, however, this problem exists for IOMMU_DEV_FEAT_SVA too. How about to fix it in another patch? Best, Zhou > > - DaveJ > > >> + >> + return flags | UACCE_DEV_SVA; >> +} >> + >> /** >> * uacce_alloc() - alloc an accelerator >> * @parent: pointer of uacce parent device >> @@ -404,11 +422,7 @@ struct uacce_device *uacce_alloc(struct device *parent, >> if (!uacce) >> return ERR_PTR(-ENOMEM); >> - if (flags & UACCE_DEV_SVA) { >> - ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA); >> - if (ret) >> - flags &= ~UACCE_DEV_SVA; >> - } >> + flags = uacce_enable_sva(parent, flags); >> uacce->parent = parent; >> uacce->flags = flags; >> @@ -432,8 +446,10 @@ struct uacce_device *uacce_alloc(struct device *parent, >> return uacce; >> err_with_uacce: >> - if (flags & UACCE_DEV_SVA) >> + if (flags & UACCE_DEV_SVA) { >> iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); >> + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); >> + } >> kfree(uacce); >> return ERR_PTR(ret); >> } >> @@ -487,8 +503,10 @@ void uacce_remove(struct uacce_device *uacce) >> mutex_unlock(&uacce->queues_lock); >> /* disable sva now since no opened queues */ >> - if (uacce->flags & UACCE_DEV_SVA) >> + if (uacce->flags & UACCE_DEV_SVA) { >> iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); >> + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); >> + } >> if (uacce->cdev) >> cdev_device_del(uacce->cdev, &uacce->dev); > > . >
On 1/22/2021 4:53 AM, Zhou Wang wrote: > On 2021/1/21 4:47, Dave Jiang wrote: >> On 1/8/2021 7:52 AM, Jean-Philippe Brucker wrote: >>> The IOPF (I/O Page Fault) feature is now enabled independently from the >>> SVA feature, because some IOPF implementations are device-specific and >>> do not require IOMMU support for PCIe PRI or Arm SMMU stall. >>> >>> Enable IOPF unconditionally when enabling SVA for now. In the future, if >>> a device driver implementing a uacce interface doesn't need IOPF >>> support, it will need to tell the uacce module, for example with a new >>> flag. >>> >>> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> >>> --- >>> Cc: Arnd Bergmann <arnd@arndb.de> >>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >>> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> >>> Cc: Zhou Wang <wangzhou1@hisilicon.com> >>> --- >>> drivers/misc/uacce/uacce.c | 32 +++++++++++++++++++++++++------- >>> 1 file changed, 25 insertions(+), 7 deletions(-) >>> >>> diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c >>> index d07af4edfcac..41ef1eb62a14 100644 >>> --- a/drivers/misc/uacce/uacce.c >>> +++ b/drivers/misc/uacce/uacce.c >>> @@ -385,6 +385,24 @@ static void uacce_release(struct device *dev) >>> kfree(uacce); >>> } >>> +static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags) >>> +{ >>> + if (!(flags & UACCE_DEV_SVA)) >>> + return flags; >>> + >>> + flags &= ~UACCE_DEV_SVA; >>> + >>> + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF)) >>> + return flags; >>> + >>> + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) { >>> + iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF); >>> + return flags; >>> + } >> Sorry to jump in a bit late on this and not specifically towards the >> intent of this patch. But I'd like to start a discussion on if we want >> to push the iommu dev feature enabling to the device driver itself rather >> than having UACCE control this? Maybe allow the device driver to manage >> the feature bits and UACCE only verify that they are enabled? >> >> 1. The device driver knows what platform it's on and what specific >> feature bits its devices supports. Maybe in the future if there are >> feature bits that's needed on one platform and not on another? > Hi Dave, > > From the discussion in this series, the meaning of IOMMU_DEV_FEAT_IOPF here > is the IOPF capability of iommu device itself. So I think check it in UACCE > will be fine. > >> 2. This allows the possibility of multiple uacce device registered to 1 >> pci dev, which for a device with asymmetric queues (Intel DSA/idxd >> driver) that is desirable feature. The current setup forces a single >> uacce device per pdev. If additional uacce devs are registered, the >> first removal of uacce device will disable the feature bit for the >> rest of the registered devices. With uacce managing the feature bit, >> it would need to add device context to the parent pdev and ref >> counting. It may be cleaner to just allow device driver to manage >> the feature bits and the driver should have all the information on >> when the feature needs to be turned on and off. > Yes, we have this problem, however, this problem exists for IOMMU_DEV_FEAT_SVA > too. How about to fix it in another patch? Hi Zhou, Right that's what I'm implying. I'm not pushing back on the IOPF feature set. Just trying to survey the opinions from people on moving the feature settings to the actual drivers rather than having it in UACCE. I will create some patches to show what I mean for comments. > > Best, > Zhou > >> - DaveJ >> >> >>> + >>> + return flags | UACCE_DEV_SVA; >>> +} >>> + >>> /** >>> * uacce_alloc() - alloc an accelerator >>> * @parent: pointer of uacce parent device >>> @@ -404,11 +422,7 @@ struct uacce_device *uacce_alloc(struct device *parent, >>> if (!uacce) >>> return ERR_PTR(-ENOMEM); >>> - if (flags & UACCE_DEV_SVA) { >>> - ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA); >>> - if (ret) >>> - flags &= ~UACCE_DEV_SVA; >>> - } >>> + flags = uacce_enable_sva(parent, flags); >>> uacce->parent = parent; >>> uacce->flags = flags; >>> @@ -432,8 +446,10 @@ struct uacce_device *uacce_alloc(struct device *parent, >>> return uacce; >>> err_with_uacce: >>> - if (flags & UACCE_DEV_SVA) >>> + if (flags & UACCE_DEV_SVA) { >>> iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); >>> + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); >>> + } >>> kfree(uacce); >>> return ERR_PTR(ret); >>> } >>> @@ -487,8 +503,10 @@ void uacce_remove(struct uacce_device *uacce) >>> mutex_unlock(&uacce->queues_lock); >>> /* disable sva now since no opened queues */ >>> - if (uacce->flags & UACCE_DEV_SVA) >>> + if (uacce->flags & UACCE_DEV_SVA) { >>> iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); >>> + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); >>> + } >>> if (uacce->cdev) >>> cdev_device_del(uacce->cdev, &uacce->dev); >> . >>
diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c index d07af4edfcac..41ef1eb62a14 100644 --- a/drivers/misc/uacce/uacce.c +++ b/drivers/misc/uacce/uacce.c @@ -385,6 +385,24 @@ static void uacce_release(struct device *dev) kfree(uacce); } +static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags) +{ + if (!(flags & UACCE_DEV_SVA)) + return flags; + + flags &= ~UACCE_DEV_SVA; + + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF)) + return flags; + + if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) { + iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF); + return flags; + } + + return flags | UACCE_DEV_SVA; +} + /** * uacce_alloc() - alloc an accelerator * @parent: pointer of uacce parent device @@ -404,11 +422,7 @@ struct uacce_device *uacce_alloc(struct device *parent, if (!uacce) return ERR_PTR(-ENOMEM); - if (flags & UACCE_DEV_SVA) { - ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA); - if (ret) - flags &= ~UACCE_DEV_SVA; - } + flags = uacce_enable_sva(parent, flags); uacce->parent = parent; uacce->flags = flags; @@ -432,8 +446,10 @@ struct uacce_device *uacce_alloc(struct device *parent, return uacce; err_with_uacce: - if (flags & UACCE_DEV_SVA) + if (flags & UACCE_DEV_SVA) { iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); + } kfree(uacce); return ERR_PTR(ret); } @@ -487,8 +503,10 @@ void uacce_remove(struct uacce_device *uacce) mutex_unlock(&uacce->queues_lock); /* disable sva now since no opened queues */ - if (uacce->flags & UACCE_DEV_SVA) + if (uacce->flags & UACCE_DEV_SVA) { iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_SVA); + iommu_dev_disable_feature(uacce->parent, IOMMU_DEV_FEAT_IOPF); + } if (uacce->cdev) cdev_device_del(uacce->cdev, &uacce->dev);
The IOPF (I/O Page Fault) feature is now enabled independently from the SVA feature, because some IOPF implementations are device-specific and do not require IOMMU support for PCIe PRI or Arm SMMU stall. Enable IOPF unconditionally when enabling SVA for now. In the future, if a device driver implementing a uacce interface doesn't need IOPF support, it will need to tell the uacce module, for example with a new flag. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> --- Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Zhou Wang <wangzhou1@hisilicon.com> --- drivers/misc/uacce/uacce.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)