Message ID | 20210121095616.1471869-8-philmd@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | meson: Clarify summary | expand |
Typo "crypto" in subject =) On 1/21/21 10:56 AM, Philippe Mathieu-Daudé wrote: > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> > --- > Cc: Daniel P. Berrange <berrange@redhat.com> > --- > meson.build | 34 +++++++++++++++++++--------------- > 1 file changed, 19 insertions(+), 15 deletions(-)
On Thu, Jan 21, 2021 at 10:56:15AM +0100, Philippe Mathieu-Daudé wrote: > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> > --- > Cc: Daniel P. Berrange <berrange@redhat.com> > --- > meson.build | 34 +++++++++++++++++++--------------- > 1 file changed, 19 insertions(+), 15 deletions(-) > > diff --git a/meson.build b/meson.build > index e372b69f163..9274775a81a 100644 > --- a/meson.build > +++ b/meson.build > @@ -2453,19 +2453,8 @@ > endif > summary(summary_info, bool_yn: true, section: 'Block layer support') > > +# Crypto Rather than a comment why not introduce grouping in the output so it is visible when reading the summary. This can be done in meson by calling summary() multiple times giving "section: 'Crypto'" arg. > summary_info = {} > -summary_info += {'sparse enabled': sparse.found()} > -if targetos == 'darwin' > - summary_info += {'Cocoa support': cocoa.found()} > -endif > -# TODO: add back version > -summary_info += {'SDL support': sdl.found()} > -summary_info += {'SDL image support': sdl_image.found()} > -# TODO: add back version > -summary_info += {'GTK support': gtk.found()} > -summary_info += {'pixman': pixman.found()} > -# TODO: add back version > -summary_info += {'VTE support': config_host.has_key('CONFIG_VTE')} > summary_info += {'TLS priority': config_host['CONFIG_TLS_PRIORITY']} > summary_info += {'GNUTLS support': config_host.has_key('CONFIG_GNUTLS')} > # TODO: add back version > @@ -2479,6 +2468,24 @@ > if config_host.has_key('CONFIG_NETTLE') > summary_info += {' XTS': not config_host.has_key('CONFIG_QEMU_PRIVATE_XTS')} > endif > +summary_info += {'crypto afalg': config_host.has_key('CONFIG_AF_ALG')} > +summary_info += {'rng-none': config_host.has_key('CONFIG_RNG_NONE')} > +summary_info += {'Linux keyring': config_host.has_key('CONFIG_SECRET_KEYRING')} > +summary(summary_info, bool_yn: true, section: 'Crypto') > + > +summary_info = {} > +summary_info += {'sparse enabled': sparse.found()} > +if targetos == 'darwin' > + summary_info += {'Cocoa support': cocoa.found()} > +endif > +# TODO: add back version > +summary_info += {'SDL support': sdl.found()} > +summary_info += {'SDL image support': sdl_image.found()} > +# TODO: add back version > +summary_info += {'GTK support': gtk.found()} > +summary_info += {'pixman': pixman.found()} > +# TODO: add back version > +summary_info += {'VTE support': config_host.has_key('CONFIG_VTE')} > summary_info += {'libtasn1': config_host.has_key('CONFIG_TASN1')} > summary_info += {'PAM': config_host.has_key('CONFIG_AUTH_PAM')} > summary_info += {'iconv support': iconv.found()} > @@ -2531,7 +2538,6 @@ > summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI')} > endif > summary_info += {'seccomp support': seccomp.found()} > -summary_info += {'crypto afalg': config_host.has_key('CONFIG_AF_ALG')} > summary_info += {'GlusterFS support': glusterfs.found()} > summary_info += {'TPM support': config_host.has_key('CONFIG_TPM')} > summary_info += {'libssh support': config_host.has_key('CONFIG_LIBSSH')} > @@ -2547,8 +2553,6 @@ > summary_info += {'libpmem support': config_host.has_key('CONFIG_LIBPMEM')} > summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')} > summary_info += {'libudev': libudev.found()} > -summary_info += {'rng-none': config_host.has_key('CONFIG_RNG_NONE')} > -summary_info += {'Linux keyring': config_host.has_key('CONFIG_SECRET_KEYRING')} > summary(summary_info, bool_yn: true, section: 'Misc') > > if not supported_cpus.contains(cpu) > -- > 2.26.2 > Regards, Daniel
On Thu, Jan 21, 2021 at 10:11:32AM +0000, Daniel P. Berrangé wrote: > On Thu, Jan 21, 2021 at 10:56:15AM +0100, Philippe Mathieu-Daudé wrote: > > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> > > --- > > Cc: Daniel P. Berrange <berrange@redhat.com> > > --- > > meson.build | 34 +++++++++++++++++++--------------- > > 1 file changed, 19 insertions(+), 15 deletions(-) > > > > diff --git a/meson.build b/meson.build > > index e372b69f163..9274775a81a 100644 > > --- a/meson.build > > +++ b/meson.build > > @@ -2453,19 +2453,8 @@ > > endif > > summary(summary_info, bool_yn: true, section: 'Block layer support') > > > > +# Crypto > > Rather than a comment why not introduce grouping in the output > so it is visible when reading the summary. > > This can be done in meson by calling summary() multiple times > giving "section: 'Crypto'" arg. Sigh, I'm not very good at reading this morning. I see this is in fact done in this patch, I just couldn't see it in the diff :-( ... > > +summary(summary_info, bool_yn: true, section: 'Crypto') Regards, Daniel
On 1/21/21 11:13 AM, Daniel P. Berrangé wrote: > On Thu, Jan 21, 2021 at 10:11:32AM +0000, Daniel P. Berrangé wrote: >> On Thu, Jan 21, 2021 at 10:56:15AM +0100, Philippe Mathieu-Daudé wrote: >>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> >>> --- >>> Cc: Daniel P. Berrange <berrange@redhat.com> >>> --- >>> meson.build | 34 +++++++++++++++++++--------------- >>> 1 file changed, 19 insertions(+), 15 deletions(-) >>> >>> diff --git a/meson.build b/meson.build >>> index e372b69f163..9274775a81a 100644 >>> --- a/meson.build >>> +++ b/meson.build >>> @@ -2453,19 +2453,8 @@ >>> endif >>> summary(summary_info, bool_yn: true, section: 'Block layer support') >>> >>> +# Crypto >> >> Rather than a comment why not introduce grouping in the output >> so it is visible when reading the summary. >> >> This can be done in meson by calling summary() multiple times >> giving "section: 'Crypto'" arg. > > Sigh, I'm not very good at reading this morning. I see this > is in fact done in this patch, I just couldn't see it in the > diff :-( No worry, I should have describe this better in the commit description. > ... >>> +summary(summary_info, bool_yn: true, section: 'Crypto') > > > Regards, > Daniel >
diff --git a/meson.build b/meson.build index e372b69f163..9274775a81a 100644 --- a/meson.build +++ b/meson.build @@ -2453,19 +2453,8 @@ endif summary(summary_info, bool_yn: true, section: 'Block layer support') +# Crypto summary_info = {} -summary_info += {'sparse enabled': sparse.found()} -if targetos == 'darwin' - summary_info += {'Cocoa support': cocoa.found()} -endif -# TODO: add back version -summary_info += {'SDL support': sdl.found()} -summary_info += {'SDL image support': sdl_image.found()} -# TODO: add back version -summary_info += {'GTK support': gtk.found()} -summary_info += {'pixman': pixman.found()} -# TODO: add back version -summary_info += {'VTE support': config_host.has_key('CONFIG_VTE')} summary_info += {'TLS priority': config_host['CONFIG_TLS_PRIORITY']} summary_info += {'GNUTLS support': config_host.has_key('CONFIG_GNUTLS')} # TODO: add back version @@ -2479,6 +2468,24 @@ if config_host.has_key('CONFIG_NETTLE') summary_info += {' XTS': not config_host.has_key('CONFIG_QEMU_PRIVATE_XTS')} endif +summary_info += {'crypto afalg': config_host.has_key('CONFIG_AF_ALG')} +summary_info += {'rng-none': config_host.has_key('CONFIG_RNG_NONE')} +summary_info += {'Linux keyring': config_host.has_key('CONFIG_SECRET_KEYRING')} +summary(summary_info, bool_yn: true, section: 'Crypto') + +summary_info = {} +summary_info += {'sparse enabled': sparse.found()} +if targetos == 'darwin' + summary_info += {'Cocoa support': cocoa.found()} +endif +# TODO: add back version +summary_info += {'SDL support': sdl.found()} +summary_info += {'SDL image support': sdl_image.found()} +# TODO: add back version +summary_info += {'GTK support': gtk.found()} +summary_info += {'pixman': pixman.found()} +# TODO: add back version +summary_info += {'VTE support': config_host.has_key('CONFIG_VTE')} summary_info += {'libtasn1': config_host.has_key('CONFIG_TASN1')} summary_info += {'PAM': config_host.has_key('CONFIG_AUTH_PAM')} summary_info += {'iconv support': iconv.found()} @@ -2531,7 +2538,6 @@ summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI')} endif summary_info += {'seccomp support': seccomp.found()} -summary_info += {'crypto afalg': config_host.has_key('CONFIG_AF_ALG')} summary_info += {'GlusterFS support': glusterfs.found()} summary_info += {'TPM support': config_host.has_key('CONFIG_TPM')} summary_info += {'libssh support': config_host.has_key('CONFIG_LIBSSH')} @@ -2547,8 +2553,6 @@ summary_info += {'libpmem support': config_host.has_key('CONFIG_LIBPMEM')} summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')} summary_info += {'libudev': libudev.found()} -summary_info += {'rng-none': config_host.has_key('CONFIG_RNG_NONE')} -summary_info += {'Linux keyring': config_host.has_key('CONFIG_SECRET_KEYRING')} summary(summary_info, bool_yn: true, section: 'Misc') if not supported_cpus.contains(cpu)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- Cc: Daniel P. Berrange <berrange@redhat.com> --- meson.build | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-)