diff mbox series

[v5,net-next,07/10] net: dsa: allow changing the tag protocol via the "tagging" device attribute

Message ID 20210121023616.1696021-8-olteanv@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series tag_8021q for Ocelot switches | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 20 this patch: 20
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: Unknown commit id '993db3800d7d', maybe rebased or not pulled?
netdev/build_allmodconfig_warn success Errors and warnings before: 20 this patch: 20
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Vladimir Oltean Jan. 21, 2021, 2:36 a.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

Currently DSA exposes the following sysfs:
$ cat /sys/class/net/eno2/dsa/tagging
ocelot

which is a read-only device attribute, introduced in the kernel as
commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"),
and used by libpcap since its commit 993db3800d7d ("Add support for DSA
link-layer types").

It would be nice if we could extend this device attribute by making it
writable:
$ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging

This is useful with DSA switches that can make use of more than one
tagging protocol. It may be useful in dsa_loop in the future too, to
perform offline testing of various taggers, or for changing between dsa
and edsa on Marvell switches, if that is desirable.

In terms of implementation, drivers can now move their tagging protocol
configuration outside of .setup/.teardown, and into .set_tag_protocol
and .del_tag_protocol. The calling order is:

.setup -> [.set_tag_protocol -> .del_tag_protocol]+ -> .teardown

There was one more contract between the DSA framework and drivers, which
is that if a CPU port needs to account for the tagger overhead in its
MTU configuration, it must do that privately. Which means it needs the
information about what tagger it uses before we call its MTU
configuration function. That promise is still held.

Writing to the tagging sysfs will first tear down the tagging protocol
for all switches in the tree attached to that DSA master, then will
attempt setup with the new tagger.

Writing will fail quickly with -EOPNOTSUPP for drivers that don't
support .set_tag_protocol, since that is checked during the deletion
phase. It is assumed that all switches within the same DSA tree use the
same driver, and therefore either all have .set_tag_protocol implemented,
or none do.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v5:
- Update the sysfs documentation
- Make the tagger_lock per DSA switch tree instead of per DSA switch,
  and hold it across the entire delete -> set procedure.
- Use dsa_tree_notify instead of dsa_broadcast.

Changes in v4:
Patch is new.

 Documentation/ABI/testing/sysfs-class-net-dsa | 11 ++-
 include/net/dsa.h                             | 21 +++++
 net/dsa/dsa.c                                 | 20 +++++
 net/dsa/dsa2.c                                | 86 +++++++++++++++++-
 net/dsa/dsa_priv.h                            | 17 ++++
 net/dsa/master.c                              | 26 +++++-
 net/dsa/port.c                                |  8 ++
 net/dsa/slave.c                               | 35 +++++---
 net/dsa/switch.c                              | 88 +++++++++++++++++++
 9 files changed, 294 insertions(+), 18 deletions(-)

Comments

Florian Fainelli Jan. 21, 2021, 3:53 a.m. UTC | #1
On 1/20/2021 6:36 PM, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> Currently DSA exposes the following sysfs:
> $ cat /sys/class/net/eno2/dsa/tagging
> ocelot
> 
> which is a read-only device attribute, introduced in the kernel as
> commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"),
> and used by libpcap since its commit 993db3800d7d ("Add support for DSA
> link-layer types").
> 
> It would be nice if we could extend this device attribute by making it
> writable:
> $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
> 
> This is useful with DSA switches that can make use of more than one
> tagging protocol. It may be useful in dsa_loop in the future too, to
> perform offline testing of various taggers, or for changing between dsa
> and edsa on Marvell switches, if that is desirable.
> 
> In terms of implementation, drivers can now move their tagging protocol
> configuration outside of .setup/.teardown, and into .set_tag_protocol
> and .del_tag_protocol. The calling order is:
> 
> .setup -> [.set_tag_protocol -> .del_tag_protocol]+ -> .teardown
> 
> There was one more contract between the DSA framework and drivers, which
> is that if a CPU port needs to account for the tagger overhead in its
> MTU configuration, it must do that privately. Which means it needs the
> information about what tagger it uses before we call its MTU
> configuration function. That promise is still held.
> 
> Writing to the tagging sysfs will first tear down the tagging protocol
> for all switches in the tree attached to that DSA master, then will
> attempt setup with the new tagger.
> 
> Writing will fail quickly with -EOPNOTSUPP for drivers that don't
> support .set_tag_protocol, since that is checked during the deletion
> phase. It is assumed that all switches within the same DSA tree use the
> same driver, and therefore either all have .set_tag_protocol implemented,
> or none do.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---

We talked about it over IRC and I like the approach you have taken, few
comments below:

[snip]

> +static int dsa_switch_tag_proto_del(struct dsa_switch *ds,
> +				    struct dsa_notifier_tag_proto_info *info)
> +{
> +	int err = 0, port;
> +
> +	for (port = 0; port < ds->num_ports; port++) {
> +		if (!dsa_switch_tag_proto_match(ds, port, info))
> +			continue;
> +
> +		/* Check early if we can replace it, so we don't delete it
> +		 * for nothing and leave the switch dangling.
> +		 */
> +		if (!ds->ops->set_tag_protocol) {
> +			err = -EOPNOTSUPP;
> +			break;
> +		}

This can be moved out of the loop.

> +
> +		/* The delete method is optional, just the setter
> +		 * is mandatory
> +		 */
> +		if (ds->ops->del_tag_protocol)
> +			ds->ops->del_tag_protocol(ds, port,
> +						  info->tag_ops->proto);
> +	}
> +
> +	return err;
> +}
> +
> +static int dsa_switch_tag_proto_set(struct dsa_switch *ds,
> +				    struct dsa_notifier_tag_proto_info *info)
> +{
> +	bool proto_changed = false;
> +	int port, err;
> +
> +	for (port = 0; port < ds->num_ports; port++) {
> +		struct dsa_port *cpu_dp = dsa_to_port(ds, port);
> +
> +		if (!dsa_switch_tag_proto_match(ds, port, info))
> +			continue;
> +
> +		err = ds->ops->set_tag_protocol(ds, cpu_dp->index,
> +						info->tag_ops->proto);
> +		if (err)
> +			return err;

Don't you need to test for ds->ops->set_tag_protocol to be implemented
before calling it? Similar comment to earlier, can we do an early check
for the operation being supported outside of the loop?
Vladimir Oltean Jan. 21, 2021, 12:23 p.m. UTC | #2
Hi Florian,

On Wed, Jan 20, 2021 at 07:53:41PM -0800, Florian Fainelli wrote:
> > +static int dsa_switch_tag_proto_del(struct dsa_switch *ds,
> > +				    struct dsa_notifier_tag_proto_info *info)
> > +{
> > +	int err = 0, port;
> > +
> > +	for (port = 0; port < ds->num_ports; port++) {
> > +		if (!dsa_switch_tag_proto_match(ds, port, info))
> > +			continue;
> > +
> > +		/* Check early if we can replace it, so we don't delete it
> > +		 * for nothing and leave the switch dangling.
> > +		 */
> > +		if (!ds->ops->set_tag_protocol) {
> > +			err = -EOPNOTSUPP;
> > +			break;
> > +		}
> 
> This can be moved out of the loop.

Thanks a lot for reviewing.
Yes, you are right, this can be moved out. It is a left-over from using
dsa_broadcast in the previous version. It is not the only left-over: the
info->tree_index is now redundant because we are notifying within a
single DSA switch tree.

> > +
> > +		/* The delete method is optional, just the setter
> > +		 * is mandatory
> > +		 */
> > +		if (ds->ops->del_tag_protocol)
> > +			ds->ops->del_tag_protocol(ds, port,
> > +						  info->tag_ops->proto);
> > +	}
> > +
> > +	return err;
> > +}
> > +
> > +static int dsa_switch_tag_proto_set(struct dsa_switch *ds,
> > +				    struct dsa_notifier_tag_proto_info *info)
> > +{
> > +	bool proto_changed = false;
> > +	int port, err;
> > +
> > +	for (port = 0; port < ds->num_ports; port++) {
> > +		struct dsa_port *cpu_dp = dsa_to_port(ds, port);
> > +
> > +		if (!dsa_switch_tag_proto_match(ds, port, info))
> > +			continue;
> > +
> > +		err = ds->ops->set_tag_protocol(ds, cpu_dp->index,
> > +						info->tag_ops->proto);
> > +		if (err)
> > +			return err;
> 
> Don't you need to test for ds->ops->set_tag_protocol to be implemented
> before calling it? Similar comment to earlier, can we do an early check
> for the operation being supported outside of the loop?

My assumption was that I had already added the check in tag_proto_del.
There are no code paths that call one but not the other. I can add the
check here too.

There's one more thing I would change: the dsa_switch_tag_proto_match.
Right now I am matching only on the CPU port, but if I take a look at
the mv88e6xxx driver:

static int mv88e6xxx_setup_port_mode(struct mv88e6xxx_chip *chip, int port)
{
	if (dsa_is_dsa_port(chip->ds, port))
		return mv88e6xxx_set_port_mode_dsa(chip, port);

	if (dsa_is_user_port(chip->ds, port))
		return mv88e6xxx_set_port_mode_normal(chip, port);

	/* Setup CPU port mode depending on its supported tag format */
	if (chip->info->tag_protocol == DSA_TAG_PROTO_DSA)
		return mv88e6xxx_set_port_mode_dsa(chip, port);

	if (chip->info->tag_protocol == DSA_TAG_PROTO_EDSA)
		return mv88e6xxx_set_port_mode_edsa(chip, port);

	return -EINVAL;
}

DSA links call the same function as CPU ports configured for
DSA_TAG_PROTO_DSA. So to cater to Marvell switches too, and to ease a
potential conversion to this API, I could add dsa_is_dsa_port to the
matching function too.
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa
index 985d84c585c6..e2da26b44dd0 100644
--- a/Documentation/ABI/testing/sysfs-class-net-dsa
+++ b/Documentation/ABI/testing/sysfs-class-net-dsa
@@ -3,5 +3,12 @@  Date:		August 2018
 KernelVersion:	4.20
 Contact:	netdev@vger.kernel.org
 Description:
-		String indicating the type of tagging protocol used by the
-		DSA slave network device.
+		On read, this file returns a string indicating the type of
+		tagging protocol used by the DSA network devices that are
+		attached to this master interface.
+		On write, this file changes the tagging protocol of the
+		attached DSA switches, if this operation is supported by the
+		driver. Changing the tagging protocol must be done with the DSA
+		interfaces and the master interface all administratively down.
+		See the "name" field of each registered struct dsa_device_ops
+		for a list of valid values.
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 2f5435d3d1db..be77a7c0a22d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -140,6 +140,12 @@  struct dsa_switch_tree {
 	/* Has this tree been applied to the hardware? */
 	bool setup;
 
+	/*
+	 * Used to serialize concurrent attempts to change the tagging
+	 * protocol via the "tagging" device attribute.
+	 */
+	struct mutex tagger_lock;
+
 	/*
 	 * Configuration data for the platform device that owns
 	 * this dsa switch tree instance.
@@ -480,9 +486,24 @@  static inline bool dsa_port_is_vlan_filtering(const struct dsa_port *dp)
 typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid,
 			      bool is_static, void *data);
 struct dsa_switch_ops {
+	/*
+	 * Tagging protocol helpers.
+	 * Switches that support a single tagging protocol should implement
+	 * only @get_tag_protocol and hardcode the protocol that they support.
+	 * Switches which can operate using multiple tagging protocols should
+	 * report in @get_tag_protocol the tagger in current use. They can
+	 * optionally set up the tagging protocol in @set_tag_protocol and
+	 * perform teardown (memory deallocation, etc) in @del_tag_protocol.
+	 * The framework guarantees paired calls to the last two functions.
+	 * For all of these helpers, @port is the CPU port that gets set up.
+	 */
 	enum dsa_tag_protocol (*get_tag_protocol)(struct dsa_switch *ds,
 						  int port,
 						  enum dsa_tag_protocol mprot);
+	int	(*set_tag_protocol)(struct dsa_switch *ds, int port,
+				    enum dsa_tag_protocol proto);
+	void	(*del_tag_protocol)(struct dsa_switch *ds, int port,
+				    enum dsa_tag_protocol proto);
 
 	int	(*setup)(struct dsa_switch *ds);
 	void	(*teardown)(struct dsa_switch *ds);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index f4ce3c5826a0..aa23736685ba 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -84,6 +84,26 @@  const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops)
 	return ops->name;
 };
 
+const struct dsa_device_ops *dsa_find_tagger_by_name(const char *buf)
+{
+	const struct dsa_device_ops *ops = NULL;
+	struct dsa_tag_driver *dsa_tag_driver;
+
+	mutex_lock(&dsa_tag_drivers_lock);
+	list_for_each_entry(dsa_tag_driver, &dsa_tag_drivers_list, list) {
+		const struct dsa_device_ops *tmp = dsa_tag_driver->ops;
+
+		if (!sysfs_streq(buf, tmp->name))
+			continue;
+
+		ops = tmp;
+		break;
+	}
+	mutex_unlock(&dsa_tag_drivers_lock);
+
+	return ops;
+}
+
 const struct dsa_device_ops *dsa_tag_driver_get(int tag_protocol)
 {
 	struct dsa_tag_driver *dsa_tag_driver;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 2953d0c1c7bc..b4518f509203 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -717,6 +717,22 @@  static int dsa_switch_setup(struct dsa_switch *ds)
 	if (err < 0)
 		goto unregister_notifier;
 
+	/* Iterate through ports list again, so that we notify the switch of
+	 * its tagging protocol after setup(), but before we start registering
+	 * the user ports, whose MTU configuration will depend upon the tagger.
+	 */
+	list_for_each_entry(dp, &ds->dst->ports, list) {
+		if (dp->ds != ds || !dsa_is_cpu_port(ds, dp->index))
+			continue;
+
+		if (ds->ops->set_tag_protocol) {
+			err = ds->ops->set_tag_protocol(ds, dp->index,
+							dp->tag_ops->proto);
+			if (err)
+				goto teardown;
+		}
+	}
+
 	devlink_params_publish(ds->devlink);
 
 	if (!ds->slave_mii_bus && ds->ops->phy_read) {
@@ -737,6 +753,9 @@  static int dsa_switch_setup(struct dsa_switch *ds)
 
 	return 0;
 
+teardown:
+	if (ds->ops->teardown)
+		ds->ops->teardown(ds);
 unregister_notifier:
 	dsa_switch_unregister_notifier(ds);
 unregister_devlink_ports:
@@ -761,6 +780,15 @@  static void dsa_switch_teardown(struct dsa_switch *ds)
 	if (ds->slave_mii_bus && ds->ops->phy_read)
 		mdiobus_unregister(ds->slave_mii_bus);
 
+	list_for_each_entry(dp, &ds->dst->ports, list) {
+		if (dp->ds != ds || !dsa_is_cpu_port(ds, dp->index))
+			continue;
+
+		if (ds->ops->del_tag_protocol)
+			ds->ops->del_tag_protocol(ds, dp->index,
+						  dp->tag_ops->proto);
+	}
+
 	dsa_switch_unregister_notifier(ds);
 
 	if (ds->ops->teardown)
@@ -880,6 +908,8 @@  static int dsa_tree_setup(struct dsa_switch_tree *dst)
 		return -EEXIST;
 	}
 
+	mutex_init(&dst->tagger_lock);
+
 	complete = dsa_tree_setup_routing_table(dst);
 	if (!complete)
 		return 0;
@@ -941,6 +971,58 @@  static void dsa_tree_teardown(struct dsa_switch_tree *dst)
 	dst->setup = false;
 }
 
+/* Since the dsa/tagging sysfs device attribute is per master, the assumption
+ * is that all DSA switches within a tree share the same tagger, otherwise
+ * they would have formed disjoint trees (different "dsa,member" values).
+ */
+int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
+			      struct net_device *master,
+			      const struct dsa_device_ops *tag_ops,
+			      const struct dsa_device_ops *old_tag_ops)
+{
+	struct dsa_notifier_tag_proto_info info = {
+		.tree_index = dst->index,
+	};
+	struct dsa_port *dp;
+	int err;
+
+	/* At the moment we don't allow changing the tag protocol under
+	 * traffic. May revisit in the future.
+	 */
+	if (master->flags & IFF_UP)
+		return -EBUSY;
+
+	list_for_each_entry(dp, &dst->ports, list) {
+		if (!dsa_is_user_port(dp->ds, dp->index))
+			continue;
+
+		if (dp->slave->flags & IFF_UP)
+			return -EBUSY;
+	}
+
+	mutex_lock(&dst->tagger_lock);
+
+	info.tag_ops = old_tag_ops;
+	err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DEL, &info);
+	if (err)
+		return err;
+
+	info.tag_ops = tag_ops;
+	err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_SET, &info);
+	if (err)
+		goto out_unwind_tagger;
+
+	mutex_unlock(&dst->tagger_lock);
+
+	return 0;
+
+out_unwind_tagger:
+	info.tag_ops = old_tag_ops;
+	dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_SET, &info);
+	mutex_unlock(&dst->tagger_lock);
+	return err;
+}
+
 static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index)
 {
 	struct dsa_switch_tree *dst = ds->dst;
@@ -1026,10 +1108,8 @@  static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master)
 
 	dp->master = master;
 	dp->type = DSA_PORT_TYPE_CPU;
-	dp->filter = tag_ops->filter;
-	dp->rcv = tag_ops->rcv;
-	dp->tag_ops = tag_ops;
 	dp->dst = dst;
+	dsa_port_set_tag_protocol(dp, tag_ops);
 
 	return 0;
 }
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 3cc1e6d76e3a..d62fe50b1703 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -28,6 +28,8 @@  enum {
 	DSA_NOTIFIER_VLAN_ADD,
 	DSA_NOTIFIER_VLAN_DEL,
 	DSA_NOTIFIER_MTU,
+	DSA_NOTIFIER_TAG_PROTO_SET,
+	DSA_NOTIFIER_TAG_PROTO_DEL,
 };
 
 /* DSA_NOTIFIER_AGEING_TIME */
@@ -82,6 +84,12 @@  struct dsa_notifier_mtu_info {
 	int mtu;
 };
 
+/* DSA_NOTIFIER_TAG_PROTO_* */
+struct dsa_notifier_tag_proto_info {
+	int tree_index;
+	const struct dsa_device_ops *tag_ops;
+};
+
 struct dsa_switchdev_event_work {
 	struct dsa_switch *ds;
 	int port;
@@ -115,6 +123,7 @@  struct dsa_slave_priv {
 /* dsa.c */
 const struct dsa_device_ops *dsa_tag_driver_get(int tag_protocol);
 void dsa_tag_driver_put(const struct dsa_device_ops *ops);
+const struct dsa_device_ops *dsa_find_tagger_by_name(const char *buf);
 
 bool dsa_schedule_work(struct work_struct *work);
 const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops);
@@ -139,6 +148,8 @@  static inline struct net_device *dsa_master_find_slave(struct net_device *dev,
 }
 
 /* port.c */
+void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
+			       const struct dsa_device_ops *tag_ops);
 int dsa_port_set_state(struct dsa_port *dp, u8 state);
 int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy);
 int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy);
@@ -201,6 +212,8 @@  int dsa_slave_suspend(struct net_device *slave_dev);
 int dsa_slave_resume(struct net_device *slave_dev);
 int dsa_slave_register_notifier(void);
 void dsa_slave_unregister_notifier(void);
+void dsa_slave_setup_tagger(struct net_device *slave);
+int dsa_slave_change_mtu(struct net_device *dev, int new_mtu);
 
 static inline struct dsa_port *dsa_slave_to_port(const struct net_device *dev)
 {
@@ -285,6 +298,10 @@  void dsa_lag_map(struct dsa_switch_tree *dst, struct net_device *lag);
 void dsa_lag_unmap(struct dsa_switch_tree *dst, struct net_device *lag);
 int dsa_tree_notify(struct dsa_switch_tree *dst, unsigned long e, void *v);
 int dsa_broadcast(unsigned long e, void *v);
+int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
+			      struct net_device *master,
+			      const struct dsa_device_ops *tag_ops,
+			      const struct dsa_device_ops *old_tag_ops);
 
 extern struct list_head dsa_tree_list;
 
diff --git a/net/dsa/master.c b/net/dsa/master.c
index cb3a5cf99b25..6c0068fbecda 100644
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -280,7 +280,31 @@  static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
 	return sprintf(buf, "%s\n",
 		       dsa_tag_protocol_to_str(cpu_dp->tag_ops));
 }
-static DEVICE_ATTR_RO(tagging);
+
+static ssize_t tagging_store(struct device *d, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct net_device *dev = to_net_dev(d);
+	struct dsa_port *cpu_dp = dev->dsa_ptr;
+	const struct dsa_device_ops *ops;
+	int err;
+
+	ops = dsa_find_tagger_by_name(buf);
+	/* Bad tagger name, or module is not loaded? */
+	if (!ops)
+		return -ENOENT;
+
+	if (ops == cpu_dp->tag_ops)
+		goto out;
+
+	err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, dev, ops,
+					cpu_dp->tag_ops);
+	if (err)
+		return err;
+out:
+	return count;
+}
+static DEVICE_ATTR_RW(tagging);
 
 static struct attribute *dsa_slave_attrs[] = {
 	&dev_attr_tagging.attr,
diff --git a/net/dsa/port.c b/net/dsa/port.c
index a8886cf40160..5e079a61528e 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -526,6 +526,14 @@  int dsa_port_vlan_del(struct dsa_port *dp,
 	return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info);
 }
 
+void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
+			       const struct dsa_device_ops *tag_ops)
+{
+	cpu_dp->filter = tag_ops->filter;
+	cpu_dp->rcv = tag_ops->rcv;
+	cpu_dp->tag_ops = tag_ops;
+}
+
 static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp)
 {
 	struct device_node *phy_dn;
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index f2fb433f3828..b0571ab4e5a7 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1430,7 +1430,7 @@  static void dsa_bridge_mtu_normalization(struct dsa_port *dp)
 	dsa_hw_port_list_free(&hw_port_list);
 }
 
-static int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
+int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct net_device *master = dsa_slave_to_master(dev);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
@@ -1708,6 +1708,27 @@  static int dsa_slave_phy_setup(struct net_device *slave_dev)
 	return ret;
 }
 
+void dsa_slave_setup_tagger(struct net_device *slave)
+{
+	struct dsa_port *dp = dsa_slave_to_port(slave);
+	struct dsa_slave_priv *p = netdev_priv(slave);
+	const struct dsa_port *cpu_dp = dp->cpu_dp;
+	struct net_device *master = cpu_dp->master;
+
+	if (cpu_dp->tag_ops->tail_tag)
+		slave->needed_tailroom = cpu_dp->tag_ops->overhead;
+	else
+		slave->needed_headroom = cpu_dp->tag_ops->overhead;
+	/* Try to save one extra realloc later in the TX path (in the master)
+	 * by also inheriting the master's needed headroom and tailroom.
+	 * The 8021q driver also does this.
+	 */
+	slave->needed_headroom += master->needed_headroom;
+	slave->needed_tailroom += master->needed_tailroom;
+
+	p->xmit = cpu_dp->tag_ops->xmit;
+}
+
 static struct lock_class_key dsa_slave_netdev_xmit_lock_key;
 static void dsa_slave_set_lockdep_class_one(struct net_device *dev,
 					    struct netdev_queue *txq,
@@ -1782,16 +1803,6 @@  int dsa_slave_create(struct dsa_port *port)
 	slave_dev->netdev_ops = &dsa_slave_netdev_ops;
 	if (ds->ops->port_max_mtu)
 		slave_dev->max_mtu = ds->ops->port_max_mtu(ds, port->index);
-	if (cpu_dp->tag_ops->tail_tag)
-		slave_dev->needed_tailroom = cpu_dp->tag_ops->overhead;
-	else
-		slave_dev->needed_headroom = cpu_dp->tag_ops->overhead;
-	/* Try to save one extra realloc later in the TX path (in the master)
-	 * by also inheriting the master's needed headroom and tailroom.
-	 * The 8021q driver also does this.
-	 */
-	slave_dev->needed_headroom += master->needed_headroom;
-	slave_dev->needed_tailroom += master->needed_tailroom;
 	SET_NETDEV_DEVTYPE(slave_dev, &dsa_type);
 
 	netdev_for_each_tx_queue(slave_dev, dsa_slave_set_lockdep_class_one,
@@ -1814,8 +1825,8 @@  int dsa_slave_create(struct dsa_port *port)
 
 	p->dp = port;
 	INIT_LIST_HEAD(&p->mall_tc_list);
-	p->xmit = cpu_dp->tag_ops->xmit;
 	port->slave = slave_dev;
+	dsa_slave_setup_tagger(slave_dev);
 
 	rtnl_lock();
 	ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN);
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index cc0b25f3adea..78200334750c 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -297,6 +297,88 @@  static int dsa_switch_vlan_del(struct dsa_switch *ds,
 	return 0;
 }
 
+static bool dsa_switch_tag_proto_match(struct dsa_switch *ds, int port,
+				       struct dsa_notifier_tag_proto_info *info)
+{
+	if (ds->dst->index == info->tree_index && dsa_is_cpu_port(ds, port))
+		return true;
+
+	return false;
+}
+
+static int dsa_switch_tag_proto_del(struct dsa_switch *ds,
+				    struct dsa_notifier_tag_proto_info *info)
+{
+	int err = 0, port;
+
+	for (port = 0; port < ds->num_ports; port++) {
+		if (!dsa_switch_tag_proto_match(ds, port, info))
+			continue;
+
+		/* Check early if we can replace it, so we don't delete it
+		 * for nothing and leave the switch dangling.
+		 */
+		if (!ds->ops->set_tag_protocol) {
+			err = -EOPNOTSUPP;
+			break;
+		}
+
+		/* The delete method is optional, just the setter
+		 * is mandatory
+		 */
+		if (ds->ops->del_tag_protocol)
+			ds->ops->del_tag_protocol(ds, port,
+						  info->tag_ops->proto);
+	}
+
+	return err;
+}
+
+static int dsa_switch_tag_proto_set(struct dsa_switch *ds,
+				    struct dsa_notifier_tag_proto_info *info)
+{
+	bool proto_changed = false;
+	int port, err;
+
+	for (port = 0; port < ds->num_ports; port++) {
+		struct dsa_port *cpu_dp = dsa_to_port(ds, port);
+
+		if (!dsa_switch_tag_proto_match(ds, port, info))
+			continue;
+
+		err = ds->ops->set_tag_protocol(ds, cpu_dp->index,
+						info->tag_ops->proto);
+		if (err)
+			return err;
+
+		dsa_port_set_tag_protocol(cpu_dp, info->tag_ops);
+		proto_changed = true;
+	}
+
+	if (!proto_changed)
+		return 0;
+
+	/* Now that changing the tag protocol can no longer fail, let's update
+	 * the remaining bits which are "duplicated for faster access", and the
+	 * bits that depend on the tagger, such as the MTU.
+	 */
+	for (port = 0; port < ds->num_ports; port++) {
+		struct net_device *slave;
+
+		if (!dsa_is_user_port(ds, port))
+			continue;
+
+		slave = dsa_to_port(ds, port)->slave;
+		dsa_slave_setup_tagger(slave);
+
+		rtnl_lock();
+		dsa_slave_change_mtu(slave, slave->mtu);
+		rtnl_unlock();
+	}
+
+	return err;
+}
+
 static int dsa_switch_event(struct notifier_block *nb,
 			    unsigned long event, void *info)
 {
@@ -343,6 +425,12 @@  static int dsa_switch_event(struct notifier_block *nb,
 	case DSA_NOTIFIER_MTU:
 		err = dsa_switch_mtu(ds, info);
 		break;
+	case DSA_NOTIFIER_TAG_PROTO_SET:
+		err = dsa_switch_tag_proto_set(ds, info);
+		break;
+	case DSA_NOTIFIER_TAG_PROTO_DEL:
+		err = dsa_switch_tag_proto_del(ds, info);
+		break;
 	default:
 		err = -EOPNOTSUPP;
 		break;