diff mbox series

[v2] Bluetooth: btrtl: Enable WBS for the specific Realtek devices

Message ID 20210119060746.7515-1-max.chou@realtek.com (mailing list archive)
State New, archived
Headers show
Series [v2] Bluetooth: btrtl: Enable WBS for the specific Realtek devices | expand

Commit Message

Max Chou Jan. 19, 2021, 6:07 a.m. UTC
From: Max Chou <max.chou@realtek.com>

By this change, it will enable WBS supported on the specific Realtek BT
devices, such as RTL8822C and RTL8852A.
In the future, it's able to maintain what the Realtek devices support WBS
here.

Tested-by: Hilda Wu <hildawu@realtek.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Max Chou <max.chou@realtek.com>

---
v2:
 - edit the null check
---
 drivers/bluetooth/btrtl.c | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

Comments

bluez.test.bot@gmail.com Jan. 19, 2021, 7:49 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=417199

---Test result---

##############################
    Test: CheckPatch - PASS
    

    ##############################
    Test: CheckGitLint - FAIL
    workflow: Add workflow files for ci
1: T1 Title exceeds max length (92>72): "Merge efedba12d0714d3dabf4b9bc440274c04db45ae0 into b23e84188e3b5241659e93ce07d2025406af1981"
3: B6 Body message is missing

Bluetooth: btrtl: Enable WBS for the specific Realtek devices
1: T1 Title exceeds max length (92>72): "Merge efedba12d0714d3dabf4b9bc440274c04db45ae0 into b23e84188e3b5241659e93ce07d2025406af1981"
3: B6 Body message is missing


    ##############################
    Test: CheckBuildK - PASS
    

    ##############################
    Test: CheckTestRunner: Setup - PASS
    

    ##############################
    Test: CheckTestRunner: l2cap-tester - PASS
    Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6

    ##############################
    Test: CheckTestRunner: bnep-tester - PASS
    Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: mgmt-tester - PASS
    Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14

    ##############################
    Test: CheckTestRunner: rfcomm-tester - PASS
    Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: sco-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: smp-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: userchan-tester - PASS
    Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0

    

---
Regards,
Linux Bluetooth
Abhishek Pandit-Subedi Jan. 21, 2021, 6:07 p.m. UTC | #2
Hi Max,

On Mon, Jan 18, 2021 at 10:07 PM <max.chou@realtek.com> wrote:
>
> From: Max Chou <max.chou@realtek.com>
>
> By this change, it will enable WBS supported on the specific Realtek BT
> devices, such as RTL8822C and RTL8852A.
> In the future, it's able to maintain what the Realtek devices support WBS
> here.
>
> Tested-by: Hilda Wu <hildawu@realtek.com>
> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> Signed-off-by: Max Chou <max.chou@realtek.com>
>
> ---
> v2:
>  - edit the null check
> ---
>  drivers/bluetooth/btrtl.c | 28 ++++++++++++++++++++++++----
>  1 file changed, 24 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 24f03a1f8d57..363e23b15faf 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -38,6 +38,19 @@
>         .hci_ver = (hciv), \
>         .hci_bus = (bus)
>
> +enum  btrtl_chip_id {
> +       CHIP_ID_8723A,          /* index  0 for RTL8723A*/
> +       CHIP_ID_8723B,          /* index  1 for RTL8723B*/
> +       CHIP_ID_8821A,          /* index  2 for RTL8821A*/
> +       CHIP_ID_8761A,          /* index  3 for RTL8761A*/
> +       CHIP_ID_8822B = 8,      /* index  8 for RTL8822B */
> +       CHIP_ID_8723D,          /* index  9 for RTL8723D */
> +       CHIP_ID_8821C,          /* index 10 for RTL8821C */
> +       CHIP_ID_8822C = 13,     /* index 13 for RTL8822C */
> +       CHIP_ID_8761B,          /* index 14 for RTL8761B */
> +       CHIP_ID_8852A = 18,     /* index 18 for RTL8852A */
> +};
> +
>  struct id_table {
>         __u16 match_flags;
>         __u16 lmp_subver;
> @@ -58,6 +71,7 @@ struct btrtl_device_info {
>         u8 *cfg_data;
>         int cfg_len;
>         bool drop_fw;
> +       int project_id;
>  };
>
>  static const struct id_table ic_id_table[] = {
> @@ -307,8 +321,10 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
>
>         /* Find project_id in table */
>         for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
> -               if (project_id == project_id_to_lmp_subver[i].id)
> +               if (project_id == project_id_to_lmp_subver[i].id) {
> +                       btrtl_dev->project_id = project_id;
>                         break;
> +               }
>         }
>
>         if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
> @@ -719,18 +735,22 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
>          */
>         set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> -       if (!btrtl_dev->ic_info)
> +       if (!btrtl_dev->project_id)
>                 goto done;

Since btrtl_dev->project_id is not a pointer, this check should not be
necessary. The switch below has a default case that prints when
project_id = 0.

>
>         /* Enable central-peripheral role (able to create new connections with
>          * an existing connection in slave role).
>          */
> -       switch (btrtl_dev->ic_info->lmp_subver) {
> -       case RTL_ROM_LMP_8822B:
> +       /* Enable WBS supported for the specific Realtek devices. */
> +       switch (btrtl_dev->project_id) {
> +       case CHIP_ID_8822C:
> +       case CHIP_ID_8852A:
>                 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
> +               set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
>                 break;
>         default:
>                 rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
> +               rtl_dev_dbg(hdev, "WBS supported not enabled.");
>                 break;
>         }
>
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 24f03a1f8d57..363e23b15faf 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,6 +38,19 @@ 
 	.hci_ver = (hciv), \
 	.hci_bus = (bus)
 
+enum  btrtl_chip_id {
+	CHIP_ID_8723A,		/* index  0 for RTL8723A*/
+	CHIP_ID_8723B,		/* index  1 for RTL8723B*/
+	CHIP_ID_8821A,		/* index  2 for RTL8821A*/
+	CHIP_ID_8761A,		/* index  3 for RTL8761A*/
+	CHIP_ID_8822B = 8,	/* index  8 for RTL8822B */
+	CHIP_ID_8723D,		/* index  9 for RTL8723D */
+	CHIP_ID_8821C,		/* index 10 for RTL8821C */
+	CHIP_ID_8822C = 13,	/* index 13 for RTL8822C */
+	CHIP_ID_8761B,		/* index 14 for RTL8761B */
+	CHIP_ID_8852A = 18,	/* index 18 for RTL8852A */
+};
+
 struct id_table {
 	__u16 match_flags;
 	__u16 lmp_subver;
@@ -58,6 +71,7 @@  struct btrtl_device_info {
 	u8 *cfg_data;
 	int cfg_len;
 	bool drop_fw;
+	int project_id;
 };
 
 static const struct id_table ic_id_table[] = {
@@ -307,8 +321,10 @@  static int rtlbt_parse_firmware(struct hci_dev *hdev,
 
 	/* Find project_id in table */
 	for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
-		if (project_id == project_id_to_lmp_subver[i].id)
+		if (project_id == project_id_to_lmp_subver[i].id) {
+			btrtl_dev->project_id = project_id;
 			break;
+		}
 	}
 
 	if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
@@ -719,18 +735,22 @@  int btrtl_setup_realtek(struct hci_dev *hdev)
 	 */
 	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 
-	if (!btrtl_dev->ic_info)
+	if (!btrtl_dev->project_id)
 		goto done;
 
 	/* Enable central-peripheral role (able to create new connections with
 	 * an existing connection in slave role).
 	 */
-	switch (btrtl_dev->ic_info->lmp_subver) {
-	case RTL_ROM_LMP_8822B:
+	/* Enable WBS supported for the specific Realtek devices. */
+	switch (btrtl_dev->project_id) {
+	case CHIP_ID_8822C:
+	case CHIP_ID_8852A:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 		break;
 	default:
 		rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
+		rtl_dev_dbg(hdev, "WBS supported not enabled.");
 		break;
 	}