@@ -22,6 +22,27 @@
#include "nvme.h"
#include "nvme-subsys.h"
+int nvme_subsys_register_ctrl(NvmeCtrl *n, Error **errp)
+{
+ NvmeSubsystem *subsys = n->subsys;
+ int cntlid;
+
+ for (cntlid = 0; cntlid < ARRAY_SIZE(subsys->ctrls); cntlid++) {
+ if (!subsys->ctrls[cntlid]) {
+ break;
+ }
+ }
+
+ if (cntlid == ARRAY_SIZE(subsys->ctrls)) {
+ error_setg(errp, "no more free controller id");
+ return -1;
+ }
+
+ subsys->ctrls[cntlid] = n;
+
+ return cntlid;
+}
+
static void nvme_subsys_setup(NvmeSubsystem *subsys)
{
snprintf((char *)subsys->subnqn, sizeof(subsys->subnqn),
@@ -20,6 +20,10 @@ typedef struct NvmeNamespace NvmeNamespace;
typedef struct NvmeSubsystem {
DeviceState parent_obj;
uint8_t subnqn[256];
+
+ NvmeCtrl *ctrls[NVME_SUBSYS_MAX_CTRLS];
} NvmeSubsystem;
+int nvme_subsys_register_ctrl(NvmeCtrl *n, Error **errp);
+
#endif /* NVME_SUBSYS_H */
@@ -4435,6 +4435,9 @@ static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
strpadcpy((char *)id->mn, sizeof(id->mn), "QEMU NVMe Ctrl", ' ');
strpadcpy((char *)id->fr, sizeof(id->fr), "1.0", ' ');
strpadcpy((char *)id->sn, sizeof(id->sn), n->params.serial, ' ');
+
+ id->cntlid = n->cntlid;
+
id->rab = 6;
id->ieee[0] = 0x00;
id->ieee[1] = 0x02;
@@ -4481,6 +4484,10 @@ static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
id->psd[0].enlat = cpu_to_le32(0x10);
id->psd[0].exlat = cpu_to_le32(0x4);
+ if (n->subsys) {
+ id->cmic |= NVME_CMIC_MULTI_CTRL;
+ }
+
NVME_CAP_SET_MQES(n->bar.cap, 0x7ff);
NVME_CAP_SET_CQR(n->bar.cap, 1);
NVME_CAP_SET_TO(n->bar.cap, 0xf);
@@ -4495,6 +4502,24 @@ static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
n->bar.intmc = n->bar.intms = 0;
}
+static int nvme_init_subsys(NvmeCtrl *n, Error **errp)
+{
+ int cntlid;
+
+ if (!n->subsys) {
+ return 0;
+ }
+
+ cntlid = nvme_subsys_register_ctrl(n, errp);
+ if (cntlid < 0) {
+ return -1;
+ }
+
+ n->cntlid = cntlid;
+
+ return 0;
+}
+
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
{
NvmeCtrl *n = NVME(pci_dev);
@@ -4515,6 +4540,10 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
+ if (nvme_init_subsys(n, errp)) {
+ error_propagate(errp, local_err);
+ return;
+ }
nvme_init_ctrl(n, pci_dev);
/* setup a namespace if the controller drive property was given */
@@ -134,6 +134,7 @@ typedef struct NvmeCtrl {
NvmeBus bus;
BlockConf conf;
+ uint16_t cntlid;
bool qs_created;
uint32_t page_size;
uint16_t page_bits;
We have nvme-subsys and nvme devices mapped together. To support multi-controller scheme to this setup, controller identifier(id) has to be managed. Earlier, cntlid(controller id) used to be always 0 because we didn't have any subsystem scheme that controller id matters. This patch introduced 'cntlid' attribute to the nvme controller instance(NvmeCtrl) and make it allocated by the nvme-subsys device mapped to the controller. If nvme-subsys is not given to the controller, then it will always be 0 as it was. Added 'ctrls' array in the nvme-subsys instance to manage attached controllers to the subsystem with a limit(32). This patch didn't take list for the controllers to make it seamless with nvme-ns device. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> --- hw/block/nvme-subsys.c | 21 +++++++++++++++++++++ hw/block/nvme-subsys.h | 4 ++++ hw/block/nvme.c | 29 +++++++++++++++++++++++++++++ hw/block/nvme.h | 1 + 4 files changed, 55 insertions(+)