Message ID | 20210121062429.26504-4-yong.wu@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/3] memory: mtk-smi: Use platform_register_drivers | expand |
On Thu, Jan 21, 2021 at 02:24:29PM +0800, Yong Wu wrote: > This patch switches MTK_SMI to tristate. Support it could be 'm'. > > Meanwhile, Fix a build issue while MTK_SMI is built as module. s/Fix/fix. What error is being fixed here? How can I reproduce it? Aren't you just adjusting it to being buildable by module? Best regards, Krzysztof > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > --- > This patch has a little conflict with the mt8192 iommu patch which > delete the MTK_LARB_NR_MAX in smi.h(It's still reviewing). > This patch rebase on the clean v5.11-rc1. > --- > drivers/memory/Kconfig | 2 +- > include/soc/mediatek/smi.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig > index 3ea6913df176..d5f0f4680880 100644 > --- a/drivers/memory/Kconfig > +++ b/drivers/memory/Kconfig > @@ -173,7 +173,7 @@ config JZ4780_NEMC > memory devices such as NAND and SRAM. > > config MTK_SMI > - bool "Mediatek SoC Memory Controller driver" if COMPILE_TEST > + tristate "Mediatek SoC Memory Controller driver" if COMPILE_TEST > depends on ARCH_MEDIATEK || COMPILE_TEST > help > This driver is for the Memory Controller module in MediaTek SoCs, > diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h > index 5a34b87d89e3..29e2fb8f33d6 100644 > --- a/include/soc/mediatek/smi.h > +++ b/include/soc/mediatek/smi.h > @@ -9,7 +9,7 @@ > #include <linux/bitops.h> > #include <linux/device.h> > > -#ifdef CONFIG_MTK_SMI > +#if IS_ENABLED(CONFIG_MTK_SMI)
On Fri, 2021-01-22 at 22:35 +0100, Krzysztof Kozlowski wrote: > On Thu, Jan 21, 2021 at 02:24:29PM +0800, Yong Wu wrote: > > This patch switches MTK_SMI to tristate. Support it could be 'm'. > > > > Meanwhile, Fix a build issue while MTK_SMI is built as module. > > s/Fix/fix. > > What error is being fixed here? How can I reproduce it? Aren't you just > adjusting it to being buildable by module? Sorry, I didn't copy the fail log here. This is the build log: In file included from .../drivers/iommu/mtk_iommu.c:34:0: .../drivers/iommu/mtk_iommu.h:84:28: error: array type has incomplete element type 'struct mtk_smi_larb_iommu' struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX]; Our iommu driver will use this structure. but it was contained by "#ifdef CONFIG_MTK_SMI". thus I change it to "#if IS_ENABLED(CONFIG_MTK_SMI)" If reproducing it, we should change mtk-iommu to module_init[1]. and switch kconfig MTK_IOMMU to tristate, then change the CONFIG_MTK_IOMMU to m. we could get the fail log. In this case, Should I squash this change into this patch? I though this is a preparing patch and the fail is caused by MTK_SMI. thus I squash that into this patch. or change it as a independent patch and send when I change MTK_IOMMU to tristate? [1] https://lore.kernel.org/linux-mediatek/1590826218-23653-14-git-send-email-yong.wu@mediatek.com/ > > Best regards, > Krzysztof > > > > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > > --- > > This patch has a little conflict with the mt8192 iommu patch which > > delete the MTK_LARB_NR_MAX in smi.h(It's still reviewing). > > This patch rebase on the clean v5.11-rc1. > > --- > > drivers/memory/Kconfig | 2 +- > > include/soc/mediatek/smi.h | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig > > index 3ea6913df176..d5f0f4680880 100644 > > --- a/drivers/memory/Kconfig > > +++ b/drivers/memory/Kconfig > > @@ -173,7 +173,7 @@ config JZ4780_NEMC > > memory devices such as NAND and SRAM. > > > > config MTK_SMI > > - bool "Mediatek SoC Memory Controller driver" if COMPILE_TEST > > + tristate "Mediatek SoC Memory Controller driver" if COMPILE_TEST > > depends on ARCH_MEDIATEK || COMPILE_TEST > > help > > This driver is for the Memory Controller module in MediaTek SoCs, > > diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h > > index 5a34b87d89e3..29e2fb8f33d6 100644 > > --- a/include/soc/mediatek/smi.h > > +++ b/include/soc/mediatek/smi.h > > @@ -9,7 +9,7 @@ > > #include <linux/bitops.h> > > #include <linux/device.h> > > > > -#ifdef CONFIG_MTK_SMI > > +#if IS_ENABLED(CONFIG_MTK_SMI)
On Mon, Jan 25, 2021 at 02:49:44PM +0800, Yong Wu wrote: > On Fri, 2021-01-22 at 22:35 +0100, Krzysztof Kozlowski wrote: > > On Thu, Jan 21, 2021 at 02:24:29PM +0800, Yong Wu wrote: > > > This patch switches MTK_SMI to tristate. Support it could be 'm'. > > > > > > Meanwhile, Fix a build issue while MTK_SMI is built as module. > > > > s/Fix/fix. > > > > What error is being fixed here? How can I reproduce it? Aren't you just > > adjusting it to being buildable by module? > > Sorry, I didn't copy the fail log here. This is the build log: > > In file included from .../drivers/iommu/mtk_iommu.c:34:0: > .../drivers/iommu/mtk_iommu.h:84:28: error: array type has incomplete > element type 'struct mtk_smi_larb_iommu' > struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX]; > > Our iommu driver will use this structure. but it was contained by > "#ifdef CONFIG_MTK_SMI". thus I change it to "#if > IS_ENABLED(CONFIG_MTK_SMI)" > > If reproducing it, we should change mtk-iommu to module_init[1]. and > switch kconfig MTK_IOMMU to tristate, then change the CONFIG_MTK_IOMMU > to m. we could get the fail log. > > In this case, Should I squash this change into this patch? I though this > is a preparing patch and the fail is caused by MTK_SMI. thus I squash > that into this patch. or change it as a independent patch and send when > I change MTK_IOMMU to tristate? If I understand correctly, there is no error before this patch. In such case just don't mention the error to fix, because it is simply part of making things modular. Best regards, Krzysztof
On Mon, 2021-01-25 at 09:44 +0100, Krzysztof Kozlowski wrote: > On Mon, Jan 25, 2021 at 02:49:44PM +0800, Yong Wu wrote: > > On Fri, 2021-01-22 at 22:35 +0100, Krzysztof Kozlowski wrote: > > > On Thu, Jan 21, 2021 at 02:24:29PM +0800, Yong Wu wrote: > > > > This patch switches MTK_SMI to tristate. Support it could be 'm'. > > > > > > > > Meanwhile, Fix a build issue while MTK_SMI is built as module. > > > > > > s/Fix/fix. > > > > > > What error is being fixed here? How can I reproduce it? Aren't you just > > > adjusting it to being buildable by module? > > > > Sorry, I didn't copy the fail log here. This is the build log: > > > > In file included from .../drivers/iommu/mtk_iommu.c:34:0: > > .../drivers/iommu/mtk_iommu.h:84:28: error: array type has incomplete > > element type 'struct mtk_smi_larb_iommu' > > struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX]; > > > > Our iommu driver will use this structure. but it was contained by > > "#ifdef CONFIG_MTK_SMI". thus I change it to "#if > > IS_ENABLED(CONFIG_MTK_SMI)" > > > > If reproducing it, we should change mtk-iommu to module_init[1]. and > > switch kconfig MTK_IOMMU to tristate, then change the CONFIG_MTK_IOMMU > > to m. we could get the fail log. > > > > In this case, Should I squash this change into this patch? I though this > > is a preparing patch and the fail is caused by MTK_SMI. thus I squash > > that into this patch. or change it as a independent patch and send when > > I change MTK_IOMMU to tristate? > > If I understand correctly, there is no error before this patch. In such > case just don't mention the error to fix, because it is simply part of > making things modular. Yes. No error before this patch. Appreciate for your help. I will remove this in the comment message in the next version. > > Best regards, > Krzysztof >
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 3ea6913df176..d5f0f4680880 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -173,7 +173,7 @@ config JZ4780_NEMC memory devices such as NAND and SRAM. config MTK_SMI - bool "Mediatek SoC Memory Controller driver" if COMPILE_TEST + tristate "Mediatek SoC Memory Controller driver" if COMPILE_TEST depends on ARCH_MEDIATEK || COMPILE_TEST help This driver is for the Memory Controller module in MediaTek SoCs, diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h index 5a34b87d89e3..29e2fb8f33d6 100644 --- a/include/soc/mediatek/smi.h +++ b/include/soc/mediatek/smi.h @@ -9,7 +9,7 @@ #include <linux/bitops.h> #include <linux/device.h> -#ifdef CONFIG_MTK_SMI +#if IS_ENABLED(CONFIG_MTK_SMI) #define MTK_LARB_NR_MAX 16
This patch switches MTK_SMI to tristate. Support it could be 'm'. Meanwhile, Fix a build issue while MTK_SMI is built as module. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- This patch has a little conflict with the mt8192 iommu patch which delete the MTK_LARB_NR_MAX in smi.h(It's still reviewing). This patch rebase on the clean v5.11-rc1. --- drivers/memory/Kconfig | 2 +- include/soc/mediatek/smi.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)