[v4,3/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL

Commit Message

Vinod Koul Jan. 18, 2021, 4:43 a.m. UTC

From: Vivek Aknurwar <[e-mail]>

Lucid 5LPE is a slightly different Lucid PLL with different offsets and
porgramming sequence so add support for these

Signed-off-by: Vivek Aknurwar <[e-mail]>
Signed-off-by: Jeevan Shriram <[e-mail]>
[vkoul: rebase and tidy up for upstream]
Signed-off-by: Vinod Koul <[e-mail]>
---
 drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |   4 +
 2 files changed, 177 insertions(+)

Comments

AngeloGioacchino Del Regno Jan. 19, 2021, 9:54 p.m. UTC | #1

Il 18/01/21 05:43, Vinod Koul ha scritto:
> From: Vivek Aknurwar <[e-mail]>
> 
> Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> porgramming sequence so add support for these
> 
> Signed-off-by: Vivek Aknurwar <[e-mail]>
> Signed-off-by: Jeevan Shriram <[e-mail]>
> [vkoul: rebase and tidy up for upstream]
> Signed-off-by: Vinod Koul <[e-mail]>
> ---
>   drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
>   drivers/clk/qcom/clk-alpha-pll.h |   4 +
>   2 files changed, 177 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index a30ea7b09224..f9c48da21bd1 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>   /* LUCID PLL specific settings and offsets */
>   #define LUCID_PCAL_DONE		BIT(27)
>   
> +/* LUCID 5LPE PLL specific settings and offsets */
> +#define LUCID_5LPE_PCAL_DONE		BIT(11)
> +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
> +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
> +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
> +
>   #define pll_alpha_width(p)					\
>   		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
>   				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> @@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
>   	.set_rate = clk_alpha_pll_agera_set_rate,
>   };
>   EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> +
> +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	/* If in FSM mode, just vote for it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		ret = clk_enable_regmap(hw);
> +		if (ret)
> +			return ret;
> +		return wait_for_pll_enable_lock(pll);
> +	}
> +
> +	/* Check if PLL is already enabled, return if enabled */
> +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> +	ret = wait_for_pll_enable_lock(pll);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the global PLL outputs */
> +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> +}
> +
> +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return;
> +
> +	/* If in FSM mode, just unvote it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		clk_disable_regmap(hw);
> +		return;
> +	}
> +
> +	/* Disable the global PLL output */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> +	if (ret)
> +		return;
> +
> +	/* Disable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> +	if (ret)
> +		return;
> +
> +	/* Place the PLL mode in STANDBY */
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +
> +/*
> + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> + * when the PLL comes out of reset. Calibrate in case it is not completed.
> + */
> +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	struct clk_hw *p;
> +	u32 val;
> +	int ret;
> +
> +	/* Return early if calibration is not needed. */
> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> +	if (val & LUCID_5LPE_PCAL_DONE)
> +		return 0;
> +
> +	p = clk_hw_get_parent(hw);
> +	if (!p)
> +		return -EINVAL;
> +
> +	ret = alpha_pll_lucid_5lpe_enable(hw);
> +	if (ret)
> +		return ret;
> +
> +	alpha_pll_lucid_5lpe_disable(hw);
> +
> +	return 0;
> +}
> +
> +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> +					 unsigned long prate)
> +{
> +	return __alpha_pll_trion_set_rate(hw, rate, prate,
> +					  LUCID_5LPE_PLL_LATCH_INPUT,
> +					  LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
> +}
> +
> +static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> +					       unsigned long parent_rate)
> +{
> +	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> +	int i, val = 0, div, ret;
> +	u32 mask;
> +
> +	/*
> +	 * If the PLL is in FSM mode, then treat set_rate callback as a
> +	 * no-operation.
> +	 */
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
> +		return 0;
> +
> +	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> +	for (i = 0; i < pll->num_post_div; i++) {
> +		if (pll->post_div_table[i].div == div) {
> +			val = pll->post_div_table[i].val;
> +			break;
> +		}
> +	}
> +
> +	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
> +	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +				  mask, val << pll->post_div_shift);
> +}
> +
> +const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
> +	.prepare = alpha_pll_lucid_5lpe_prepare,
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +	.set_rate = alpha_pll_lucid_5lpe_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
> +	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
> +	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
> +	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 0ea30d2f3da1..6943e933be0f 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
>   extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
>   extern const struct clk_ops clk_alpha_pll_agera_ops;
>   
> +extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
> +
>   void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>   			     const struct alpha_pll_config *config);
>   void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> 

Thanks for following my suggestion!

Reviewed-by: AngeloGioacchino Del Regno 
<[e-mail]>

Bjorn Andersson Jan. 25, 2021, 5:18 p.m. UTC | #2

On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:

> From: Vivek Aknurwar <[e-mail]>
> 
> Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> porgramming sequence so add support for these
> 
> Signed-off-by: Vivek Aknurwar <[e-mail]>
> Signed-off-by: Jeevan Shriram <[e-mail]>
> [vkoul: rebase and tidy up for upstream]
> Signed-off-by: Vinod Koul <[e-mail]>
> ---
>  drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
>  drivers/clk/qcom/clk-alpha-pll.h |   4 +
>  2 files changed, 177 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index a30ea7b09224..f9c48da21bd1 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>  /* LUCID PLL specific settings and offsets */
>  #define LUCID_PCAL_DONE		BIT(27)
>  
> +/* LUCID 5LPE PLL specific settings and offsets */
> +#define LUCID_5LPE_PCAL_DONE		BIT(11)
> +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
> +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
> +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
> +
>  #define pll_alpha_width(p)					\
>  		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
>  				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> @@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
>  	.set_rate = clk_alpha_pll_agera_set_rate,
>  };
>  EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> +
> +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	/* If in FSM mode, just vote for it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		ret = clk_enable_regmap(hw);
> +		if (ret)
> +			return ret;
> +		return wait_for_pll_enable_lock(pll);
> +	}
> +
> +	/* Check if PLL is already enabled, return if enabled */
> +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> +	ret = wait_for_pll_enable_lock(pll);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the global PLL outputs */
> +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> +}
> +
> +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return;
> +
> +	/* If in FSM mode, just unvote it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		clk_disable_regmap(hw);
> +		return;
> +	}
> +
> +	/* Disable the global PLL output */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> +	if (ret)
> +		return;
> +
> +	/* Disable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> +	if (ret)
> +		return;
> +
> +	/* Place the PLL mode in STANDBY */
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +
> +/*
> + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> + * when the PLL comes out of reset. Calibrate in case it is not completed.
> + */
> +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	struct clk_hw *p;
> +	u32 val;
> +	int ret;
> +
> +	/* Return early if calibration is not needed. */
> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);

I doubt this will ever fail, but static analysis tools would complain
about val possibly being uninitialized after this.

And the return value is checked in the other functions.

Regards,
Bjorn

> +	if (val & LUCID_5LPE_PCAL_DONE)
> +		return 0;
> +
> +	p = clk_hw_get_parent(hw);
> +	if (!p)
> +		return -EINVAL;
> +
> +	ret = alpha_pll_lucid_5lpe_enable(hw);
> +	if (ret)
> +		return ret;
> +
> +	alpha_pll_lucid_5lpe_disable(hw);
> +
> +	return 0;
> +}
> +
> +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> +					 unsigned long prate)
> +{
> +	return __alpha_pll_trion_set_rate(hw, rate, prate,
> +					  LUCID_5LPE_PLL_LATCH_INPUT,
> +					  LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
> +}
> +
> +static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> +					       unsigned long parent_rate)
> +{
> +	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> +	int i, val = 0, div, ret;
> +	u32 mask;
> +
> +	/*
> +	 * If the PLL is in FSM mode, then treat set_rate callback as a
> +	 * no-operation.
> +	 */
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
> +		return 0;
> +
> +	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> +	for (i = 0; i < pll->num_post_div; i++) {
> +		if (pll->post_div_table[i].div == div) {
> +			val = pll->post_div_table[i].val;
> +			break;
> +		}
> +	}
> +
> +	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
> +	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +				  mask, val << pll->post_div_shift);
> +}
> +
> +const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
> +	.prepare = alpha_pll_lucid_5lpe_prepare,
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +	.set_rate = alpha_pll_lucid_5lpe_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
> +	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
> +	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
> +	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 0ea30d2f3da1..6943e933be0f 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
>  extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
>  extern const struct clk_ops clk_alpha_pll_agera_ops;
>  
> +extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
> +
>  void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>  			     const struct alpha_pll_config *config);
>  void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> -- 
> 2.26.2
>

Vinod Koul Jan. 26, 2021, 7:59 a.m. UTC | #3

On 25-01-21, 11:18, Bjorn Andersson wrote:
> On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:
> 
> > From: Vivek Aknurwar <[e-mail]>
> > 
> > Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> > porgramming sequence so add support for these
> > 
> > Signed-off-by: Vivek Aknurwar <[e-mail]>
> > Signed-off-by: Jeevan Shriram <[e-mail]>
> > [vkoul: rebase and tidy up for upstream]
> > Signed-off-by: Vinod Koul <[e-mail]>
> > ---
> >  drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
> >  drivers/clk/qcom/clk-alpha-pll.h |   4 +
> >  2 files changed, 177 insertions(+)
> > 
> > diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > index a30ea7b09224..f9c48da21bd1 100644
> > --- a/drivers/clk/qcom/clk-alpha-pll.c
> > +++ b/drivers/clk/qcom/clk-alpha-pll.c
> > @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> >  /* LUCID PLL specific settings and offsets */
> >  #define LUCID_PCAL_DONE		BIT(27)
> >  
> > +/* LUCID 5LPE PLL specific settings and offsets */
> > +#define LUCID_5LPE_PCAL_DONE		BIT(11)
> > +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
> > +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
> > +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
> > +
> >  #define pll_alpha_width(p)					\
> >  		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
> >  				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> > @@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
> >  	.set_rate = clk_alpha_pll_agera_set_rate,
> >  };
> >  EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> > +
> > +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* If in FSM mode, just vote for it */
> > +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> > +		ret = clk_enable_regmap(hw);
> > +		if (ret)
> > +			return ret;
> > +		return wait_for_pll_enable_lock(pll);
> > +	}
> > +
> > +	/* Check if PLL is already enabled, return if enabled */
> > +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> > +	if (ret)
> > +		return ret;
> > +
> > +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> > +
> > +	ret = wait_for_pll_enable_lock(pll);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Enable the PLL outputs */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Enable the global PLL outputs */
> > +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> > +}
> > +
> > +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> > +	if (ret)
> > +		return;
> > +
> > +	/* If in FSM mode, just unvote it */
> > +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> > +		clk_disable_regmap(hw);
> > +		return;
> > +	}
> > +
> > +	/* Disable the global PLL output */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> > +	if (ret)
> > +		return;
> > +
> > +	/* Disable the PLL outputs */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> > +	if (ret)
> > +		return;
> > +
> > +	/* Place the PLL mode in STANDBY */
> > +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> > +}
> > +
> > +/*
> > + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> > + * when the PLL comes out of reset. Calibrate in case it is not completed.
> > + */
> > +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	struct clk_hw *p;
> > +	u32 val;
> > +	int ret;
> > +
> > +	/* Return early if calibration is not needed. */
> > +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> 
> I doubt this will ever fail, but static analysis tools would complain
> about val possibly being uninitialized after this.
> 
> And the return value is checked in the other functions.

Yes agreed, will update this. Somehow I dont this my checked W=1
complained about this, maybe some others would..

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index a30ea7b09224..f9c48da21bd1 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -156,6 +156,12 @@  EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 /* LUCID PLL specific settings and offsets */
 #define LUCID_PCAL_DONE		BIT(27)
 
+/* LUCID 5LPE PLL specific settings and offsets */
+#define LUCID_5LPE_PCAL_DONE		BIT(11)
+#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
+#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
+#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1604,3 +1610,170 @@  const struct clk_ops clk_alpha_pll_agera_ops = {
 	.set_rate = clk_alpha_pll_agera_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
+
+static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll_enable_lock(pll);
+	}
+
+	/* Check if PLL is already enabled, return if enabled */
+	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
+
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	/* Enable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
+	if (ret)
+		return ret;
+
+	/* Enable the global PLL outputs */
+	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	/* Disable the global PLL output */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return;
+
+	/* Disable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
+	if (ret)
+		return;
+
+	/* Place the PLL mode in STANDBY */
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
+}
+
+/*
+ * The Lucid 5LPE PLL requires a power-on self-calibration which happens
+ * when the PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct clk_hw *p;
+	u32 val;
+	int ret;
+
+	/* Return early if calibration is not needed. */
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (val & LUCID_5LPE_PCAL_DONE)
+		return 0;
+
+	p = clk_hw_get_parent(hw);
+	if (!p)
+		return -EINVAL;
+
+	ret = alpha_pll_lucid_5lpe_enable(hw);
+	if (ret)
+		return ret;
+
+	alpha_pll_lucid_5lpe_disable(hw);
+
+	return 0;
+}
+
+static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate)
+{
+	return __alpha_pll_trion_set_rate(hw, rate, prate,
+					  LUCID_5LPE_PLL_LATCH_INPUT,
+					  LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
+}
+
+static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+					       unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	int i, val = 0, div, ret;
+	u32 mask;
+
+	/*
+	 * If the PLL is in FSM mode, then treat set_rate callback as a
+	 * no-operation.
+	 */
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
+		return 0;
+
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+	for (i = 0; i < pll->num_post_div; i++) {
+		if (pll->post_div_table[i].div == div) {
+			val = pll->post_div_table[i].val;
+			break;
+		}
+	}
+
+	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
+	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+				  mask, val << pll->post_div_shift);
+}
+
+const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
+	.prepare = alpha_pll_lucid_5lpe_prepare,
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_lucid_5lpe_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0ea30d2f3da1..6943e933be0f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -144,6 +144,10 @@  extern const struct clk_ops clk_alpha_pll_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_agera_ops;
 
+extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,