Message ID | 20210119045920.447-7-xieyongji@bytedance.com (mailing list archive) |
---|---|
State | RFC |
Headers | show |
Series | Introduce VDUSE - vDPA Device in Userspace | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Not a local patch |
On 2021/1/19 下午12:59, Xie Yongji wrote: > Add an opaque pointer for vhost IOTLB to store the > corresponding vma->vm_file and offset on the DMA mapping. Let's split the patch into two. 1) opaque pointer 2) vma stuffs > > It will be used in VDUSE case later. > > Suggested-by: Jason Wang <jasowang@redhat.com> > Signed-off-by: Xie Yongji <xieyongji@bytedance.com> > --- > drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++--- > drivers/vhost/iotlb.c | 5 ++- > drivers/vhost/vdpa.c | 66 +++++++++++++++++++++++++++++++++++----- > drivers/vhost/vhost.c | 4 +-- > include/linux/vdpa.h | 3 +- > include/linux/vhost_iotlb.h | 8 ++++- > 6 files changed, 79 insertions(+), 18 deletions(-) > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > index 03c796873a6b..1ffcef67954f 100644 > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > @@ -279,7 +279,7 @@ static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page, > */ > spin_lock(&vdpasim->iommu_lock); > ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1, > - pa, dir_to_perm(dir)); > + pa, dir_to_perm(dir), NULL); Maybe its better to introduce vhost_iotlb_add_range_ctx() which can accepts the opaque (context). And let vhost_iotlb_add_range() just call that. > spin_unlock(&vdpasim->iommu_lock); > if (ret) > return DMA_MAPPING_ERROR; > @@ -317,7 +317,7 @@ static void *vdpasim_alloc_coherent(struct device *dev, size_t size, > > ret = vhost_iotlb_add_range(iommu, (u64)pa, > (u64)pa + size - 1, > - pa, VHOST_MAP_RW); > + pa, VHOST_MAP_RW, NULL); > if (ret) { > *dma_addr = DMA_MAPPING_ERROR; > kfree(addr); > @@ -625,7 +625,8 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > for (map = vhost_iotlb_itree_first(iotlb, start, last); map; > map = vhost_iotlb_itree_next(map, start, last)) { > ret = vhost_iotlb_add_range(vdpasim->iommu, map->start, > - map->last, map->addr, map->perm); > + map->last, map->addr, > + map->perm, NULL); > if (ret) > goto err; > } > @@ -639,14 +640,14 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > } > > static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size, > - u64 pa, u32 perm) > + u64 pa, u32 perm, void *opaque) > { > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > int ret; > > spin_lock(&vdpasim->iommu_lock); > ret = vhost_iotlb_add_range(vdpasim->iommu, iova, iova + size - 1, pa, > - perm); > + perm, NULL); > spin_unlock(&vdpasim->iommu_lock); > > return ret; > diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c > index 0fd3f87e913c..3bd5bd06cdbc 100644 > --- a/drivers/vhost/iotlb.c > +++ b/drivers/vhost/iotlb.c > @@ -42,13 +42,15 @@ EXPORT_SYMBOL_GPL(vhost_iotlb_map_free); > * @last: last of IOVA range > * @addr: the address that is mapped to @start > * @perm: access permission of this range > + * @opaque: the opaque pointer for the IOTLB mapping > * > * Returns an error last is smaller than start or memory allocation > * fails > */ > int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > u64 start, u64 last, > - u64 addr, unsigned int perm) > + u64 addr, unsigned int perm, > + void *opaque) > { > struct vhost_iotlb_map *map; > > @@ -71,6 +73,7 @@ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > map->last = last; > map->addr = addr; > map->perm = perm; > + map->opaque = opaque; > > iotlb->nmaps++; > vhost_iotlb_itree_insert(map, &iotlb->root); > diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c > index 36b6950ba37f..e83e5be7cec8 100644 > --- a/drivers/vhost/vdpa.c > +++ b/drivers/vhost/vdpa.c > @@ -488,6 +488,7 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > struct vhost_dev *dev = &v->vdev; > struct vdpa_device *vdpa = v->vdpa; > struct vhost_iotlb *iotlb = dev->iotlb; > + struct vhost_iotlb_file *iotlb_file; > struct vhost_iotlb_map *map; > struct page *page; > unsigned long pfn, pinned; > @@ -504,6 +505,10 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > } > atomic64_sub(map->size >> PAGE_SHIFT, > &dev->mm->pinned_vm); > + } else if (map->opaque) { > + iotlb_file = (struct vhost_iotlb_file *)map->opaque; > + fput(iotlb_file->file); > + kfree(iotlb_file); > } > vhost_iotlb_map_free(iotlb, map); > } > @@ -540,8 +545,8 @@ static int perm_to_iommu_flags(u32 perm) > return flags | IOMMU_CACHE; > } > > -static int vhost_vdpa_map(struct vhost_vdpa *v, > - u64 iova, u64 size, u64 pa, u32 perm) > +static int vhost_vdpa_map(struct vhost_vdpa *v, u64 iova, > + u64 size, u64 pa, u32 perm, void *opaque) > { > struct vhost_dev *dev = &v->vdev; > struct vdpa_device *vdpa = v->vdpa; > @@ -549,12 +554,12 @@ static int vhost_vdpa_map(struct vhost_vdpa *v, > int r = 0; > > r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1, > - pa, perm); > + pa, perm, opaque); > if (r) > return r; > > if (ops->dma_map) { > - r = ops->dma_map(vdpa, iova, size, pa, perm); > + r = ops->dma_map(vdpa, iova, size, pa, perm, opaque); > } else if (ops->set_map) { > if (!v->in_batch) > r = ops->set_map(vdpa, dev->iotlb); > @@ -591,6 +596,51 @@ static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size) > } > } > > +static int vhost_vdpa_sva_map(struct vhost_vdpa *v, > + u64 iova, u64 size, u64 uaddr, u32 perm) > +{ > + u64 offset, map_size, map_iova = iova; > + struct vhost_iotlb_file *iotlb_file; > + struct vm_area_struct *vma; > + int ret; Lacking mmap_read_lock(). > + > + while (size) { > + vma = find_vma(current->mm, uaddr); > + if (!vma) { > + ret = -EINVAL; > + goto err; > + } > + map_size = min(size, vma->vm_end - uaddr); > + offset = (vma->vm_pgoff << PAGE_SHIFT) + uaddr - vma->vm_start; > + iotlb_file = NULL; > + if (vma->vm_file && (vma->vm_flags & VM_SHARED)) { I wonder if we need more strict check here. When developing vhost-vdpa, I try hard to make sure the map can only work for user pages. So the question is: do we need to exclude MMIO area or only allow shmem to work here? > + iotlb_file = kmalloc(sizeof(*iotlb_file), GFP_KERNEL); > + if (!iotlb_file) { > + ret = -ENOMEM; > + goto err; > + } > + iotlb_file->file = get_file(vma->vm_file); > + iotlb_file->offset = offset; > + } I wonder if it's better to allocate iotlb_file and make iotlb_file->file = NULL && iotlb_file->offset = 0. This can force a consistent code for the vDPA parents. Or we can simply fail the map without a file as backend. > + ret = vhost_vdpa_map(v, map_iova, map_size, uaddr, > + perm, iotlb_file); > + if (ret) { > + if (iotlb_file) { > + fput(iotlb_file->file); > + kfree(iotlb_file); > + } > + goto err; > + } > + size -= map_size; > + uaddr += map_size; > + map_iova += map_size; > + } > + return 0; > +err: > + vhost_vdpa_unmap(v, iova, map_iova - iova); > + return ret; > +} > + > static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > struct vhost_iotlb_msg *msg) > { > @@ -615,8 +665,8 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > return -EEXIST; > > if (vdpa->sva) > - return vhost_vdpa_map(v, msg->iova, msg->size, > - msg->uaddr, msg->perm); > + return vhost_vdpa_sva_map(v, msg->iova, msg->size, > + msg->uaddr, msg->perm); So I think it's better squash vhost_vdpa_sva_map() and related changes into previous patch. > > /* Limit the use of memory for bookkeeping */ > page_list = (struct page **) __get_free_page(GFP_KERNEL); > @@ -671,7 +721,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT; > ret = vhost_vdpa_map(v, iova, csize, > map_pfn << PAGE_SHIFT, > - msg->perm); > + msg->perm, NULL); > if (ret) { > /* > * Unpin the pages that are left unmapped > @@ -700,7 +750,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > > /* Pin the rest chunk */ > ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT, > - map_pfn << PAGE_SHIFT, msg->perm); > + map_pfn << PAGE_SHIFT, msg->perm, NULL); > out: > if (ret) { > if (nchunks) { > diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c > index a262e12c6dc2..120dd5b3c119 100644 > --- a/drivers/vhost/vhost.c > +++ b/drivers/vhost/vhost.c > @@ -1104,7 +1104,7 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev, > vhost_vq_meta_reset(dev); > if (vhost_iotlb_add_range(dev->iotlb, msg->iova, > msg->iova + msg->size - 1, > - msg->uaddr, msg->perm)) { > + msg->uaddr, msg->perm, NULL)) { > ret = -ENOMEM; > break; > } > @@ -1450,7 +1450,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) > region->guest_phys_addr + > region->memory_size - 1, > region->userspace_addr, > - VHOST_MAP_RW)) > + VHOST_MAP_RW, NULL)) > goto err; > } > > diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h > index f86869651614..b264c627e94b 100644 > --- a/include/linux/vdpa.h > +++ b/include/linux/vdpa.h > @@ -189,6 +189,7 @@ struct vdpa_iova_range { > * @size: size of the area > * @pa: physical address for the map > * @perm: device access permission (VHOST_MAP_XX) > + * @opaque: the opaque pointer for the mapping > * Returns integer: success (0) or error (< 0) > * @dma_unmap: Unmap an area of IOVA (optional but > * must be implemented with dma_map) > @@ -243,7 +244,7 @@ struct vdpa_config_ops { > /* DMA ops */ > int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb); > int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size, > - u64 pa, u32 perm); > + u64 pa, u32 perm, void *opaque); > int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size); > > /* Free device resources */ > diff --git a/include/linux/vhost_iotlb.h b/include/linux/vhost_iotlb.h > index 6b09b786a762..66a50c11c8ca 100644 > --- a/include/linux/vhost_iotlb.h > +++ b/include/linux/vhost_iotlb.h > @@ -4,6 +4,11 @@ > > #include <linux/interval_tree_generic.h> > > +struct vhost_iotlb_file { > + struct file *file; > + u64 offset; > +}; I think we'd better either: 1) simply use struct vhost_iotlb_file * instead of void *opaque for vhost_iotlb_map or 2)rename and move the vhost_iotlb_file to vdpa 2) looks better since we want to let vhost iotlb to carry any type of context (opaque pointer) And if we do this, the modification of vdpa_config_ops deserves a separate patch. Thanks > + > struct vhost_iotlb_map { > struct rb_node rb; > struct list_head link; > @@ -17,6 +22,7 @@ struct vhost_iotlb_map { > u32 perm; > u32 flags_padding; > u64 __subtree_last; > + void *opaque; > }; > > #define VHOST_IOTLB_FLAG_RETIRE 0x1 > @@ -30,7 +36,7 @@ struct vhost_iotlb { > }; > > int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, u64 start, u64 last, > - u64 addr, unsigned int perm); > + u64 addr, unsigned int perm, void *opaque); > void vhost_iotlb_del_range(struct vhost_iotlb *iotlb, u64 start, u64 last); > > struct vhost_iotlb *vhost_iotlb_alloc(unsigned int limit, unsigned int flags);
On Wed, Jan 20, 2021 at 2:24 PM Jason Wang <jasowang@redhat.com> wrote: > > > On 2021/1/19 下午12:59, Xie Yongji wrote: > > Add an opaque pointer for vhost IOTLB to store the > > corresponding vma->vm_file and offset on the DMA mapping. > > > Let's split the patch into two. > > 1) opaque pointer > 2) vma stuffs > OK. > > > > > It will be used in VDUSE case later. > > > > Suggested-by: Jason Wang <jasowang@redhat.com> > > Signed-off-by: Xie Yongji <xieyongji@bytedance.com> > > --- > > drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++--- > > drivers/vhost/iotlb.c | 5 ++- > > drivers/vhost/vdpa.c | 66 +++++++++++++++++++++++++++++++++++----- > > drivers/vhost/vhost.c | 4 +-- > > include/linux/vdpa.h | 3 +- > > include/linux/vhost_iotlb.h | 8 ++++- > > 6 files changed, 79 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > index 03c796873a6b..1ffcef67954f 100644 > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > @@ -279,7 +279,7 @@ static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page, > > */ > > spin_lock(&vdpasim->iommu_lock); > > ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1, > > - pa, dir_to_perm(dir)); > > + pa, dir_to_perm(dir), NULL); > > > Maybe its better to introduce > > vhost_iotlb_add_range_ctx() which can accepts the opaque (context). And > let vhost_iotlb_add_range() just call that. > If so, we need export both vhost_iotlb_add_range() and vhost_iotlb_add_range_ctx() which will be used in VDUSE driver. Is it a bit redundant? > > > spin_unlock(&vdpasim->iommu_lock); > > if (ret) > > return DMA_MAPPING_ERROR; > > @@ -317,7 +317,7 @@ static void *vdpasim_alloc_coherent(struct device *dev, size_t size, > > > > ret = vhost_iotlb_add_range(iommu, (u64)pa, > > (u64)pa + size - 1, > > - pa, VHOST_MAP_RW); > > + pa, VHOST_MAP_RW, NULL); > > if (ret) { > > *dma_addr = DMA_MAPPING_ERROR; > > kfree(addr); > > @@ -625,7 +625,8 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > > for (map = vhost_iotlb_itree_first(iotlb, start, last); map; > > map = vhost_iotlb_itree_next(map, start, last)) { > > ret = vhost_iotlb_add_range(vdpasim->iommu, map->start, > > - map->last, map->addr, map->perm); > > + map->last, map->addr, > > + map->perm, NULL); > > if (ret) > > goto err; > > } > > @@ -639,14 +640,14 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > > } > > > > static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size, > > - u64 pa, u32 perm) > > + u64 pa, u32 perm, void *opaque) > > { > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > int ret; > > > > spin_lock(&vdpasim->iommu_lock); > > ret = vhost_iotlb_add_range(vdpasim->iommu, iova, iova + size - 1, pa, > > - perm); > > + perm, NULL); > > spin_unlock(&vdpasim->iommu_lock); > > > > return ret; > > diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c > > index 0fd3f87e913c..3bd5bd06cdbc 100644 > > --- a/drivers/vhost/iotlb.c > > +++ b/drivers/vhost/iotlb.c > > @@ -42,13 +42,15 @@ EXPORT_SYMBOL_GPL(vhost_iotlb_map_free); > > * @last: last of IOVA range > > * @addr: the address that is mapped to @start > > * @perm: access permission of this range > > + * @opaque: the opaque pointer for the IOTLB mapping > > * > > * Returns an error last is smaller than start or memory allocation > > * fails > > */ > > int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > > u64 start, u64 last, > > - u64 addr, unsigned int perm) > > + u64 addr, unsigned int perm, > > + void *opaque) > > { > > struct vhost_iotlb_map *map; > > > > @@ -71,6 +73,7 @@ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > > map->last = last; > > map->addr = addr; > > map->perm = perm; > > + map->opaque = opaque; > > > > iotlb->nmaps++; > > vhost_iotlb_itree_insert(map, &iotlb->root); > > diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c > > index 36b6950ba37f..e83e5be7cec8 100644 > > --- a/drivers/vhost/vdpa.c > > +++ b/drivers/vhost/vdpa.c > > @@ -488,6 +488,7 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > > struct vhost_dev *dev = &v->vdev; > > struct vdpa_device *vdpa = v->vdpa; > > struct vhost_iotlb *iotlb = dev->iotlb; > > + struct vhost_iotlb_file *iotlb_file; > > struct vhost_iotlb_map *map; > > struct page *page; > > unsigned long pfn, pinned; > > @@ -504,6 +505,10 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > > } > > atomic64_sub(map->size >> PAGE_SHIFT, > > &dev->mm->pinned_vm); > > + } else if (map->opaque) { > > + iotlb_file = (struct vhost_iotlb_file *)map->opaque; > > + fput(iotlb_file->file); > > + kfree(iotlb_file); > > } > > vhost_iotlb_map_free(iotlb, map); > > } > > @@ -540,8 +545,8 @@ static int perm_to_iommu_flags(u32 perm) > > return flags | IOMMU_CACHE; > > } > > > > -static int vhost_vdpa_map(struct vhost_vdpa *v, > > - u64 iova, u64 size, u64 pa, u32 perm) > > +static int vhost_vdpa_map(struct vhost_vdpa *v, u64 iova, > > + u64 size, u64 pa, u32 perm, void *opaque) > > { > > struct vhost_dev *dev = &v->vdev; > > struct vdpa_device *vdpa = v->vdpa; > > @@ -549,12 +554,12 @@ static int vhost_vdpa_map(struct vhost_vdpa *v, > > int r = 0; > > > > r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1, > > - pa, perm); > > + pa, perm, opaque); > > if (r) > > return r; > > > > if (ops->dma_map) { > > - r = ops->dma_map(vdpa, iova, size, pa, perm); > > + r = ops->dma_map(vdpa, iova, size, pa, perm, opaque); > > } else if (ops->set_map) { > > if (!v->in_batch) > > r = ops->set_map(vdpa, dev->iotlb); > > @@ -591,6 +596,51 @@ static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size) > > } > > } > > > > +static int vhost_vdpa_sva_map(struct vhost_vdpa *v, > > + u64 iova, u64 size, u64 uaddr, u32 perm) > > +{ > > + u64 offset, map_size, map_iova = iova; > > + struct vhost_iotlb_file *iotlb_file; > > + struct vm_area_struct *vma; > > + int ret; > > > Lacking mmap_read_lock(). > Good catch! Will fix it. > > > + > > + while (size) { > > + vma = find_vma(current->mm, uaddr); > > + if (!vma) { > > + ret = -EINVAL; > > + goto err; > > + } > > + map_size = min(size, vma->vm_end - uaddr); > > + offset = (vma->vm_pgoff << PAGE_SHIFT) + uaddr - vma->vm_start; > > + iotlb_file = NULL; > > + if (vma->vm_file && (vma->vm_flags & VM_SHARED)) { > > > I wonder if we need more strict check here. When developing vhost-vdpa, > I try hard to make sure the map can only work for user pages. > > So the question is: do we need to exclude MMIO area or only allow shmem > to work here? > Do you mean we need to check VM_MIXEDMAP | VM_PFNMAP here? It makes sense to me. > > > > + iotlb_file = kmalloc(sizeof(*iotlb_file), GFP_KERNEL); > > + if (!iotlb_file) { > > + ret = -ENOMEM; > > + goto err; > > + } > > + iotlb_file->file = get_file(vma->vm_file); > > + iotlb_file->offset = offset; > > + } > > > I wonder if it's better to allocate iotlb_file and make iotlb_file->file > = NULL && iotlb_file->offset = 0. This can force a consistent code for > the vDPA parents. > Looks fine to me. > Or we can simply fail the map without a file as backend. > Actually there will be some vma without vm_file during vm booting. > > > + ret = vhost_vdpa_map(v, map_iova, map_size, uaddr, > > + perm, iotlb_file); > > + if (ret) { > > + if (iotlb_file) { > > + fput(iotlb_file->file); > > + kfree(iotlb_file); > > + } > > + goto err; > > + } > > + size -= map_size; > > + uaddr += map_size; > > + map_iova += map_size; > > + } > > + return 0; > > +err: > > + vhost_vdpa_unmap(v, iova, map_iova - iova); > > + return ret; > > +} > > + > > static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > > struct vhost_iotlb_msg *msg) > > { > > @@ -615,8 +665,8 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > > return -EEXIST; > > > > if (vdpa->sva) > > - return vhost_vdpa_map(v, msg->iova, msg->size, > > - msg->uaddr, msg->perm); > > + return vhost_vdpa_sva_map(v, msg->iova, msg->size, > > + msg->uaddr, msg->perm); > > > So I think it's better squash vhost_vdpa_sva_map() and related changes > into previous patch. > OK, so the order of the patches is: 1) opaque pointer 2) va support + vma stuffs? Is it OK? > > > > > /* Limit the use of memory for bookkeeping */ > > page_list = (struct page **) __get_free_page(GFP_KERNEL); > > @@ -671,7 +721,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > > csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT; > > ret = vhost_vdpa_map(v, iova, csize, > > map_pfn << PAGE_SHIFT, > > - msg->perm); > > + msg->perm, NULL); > > if (ret) { > > /* > > * Unpin the pages that are left unmapped > > @@ -700,7 +750,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, > > > > /* Pin the rest chunk */ > > ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT, > > - map_pfn << PAGE_SHIFT, msg->perm); > > + map_pfn << PAGE_SHIFT, msg->perm, NULL); > > out: > > if (ret) { > > if (nchunks) { > > diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c > > index a262e12c6dc2..120dd5b3c119 100644 > > --- a/drivers/vhost/vhost.c > > +++ b/drivers/vhost/vhost.c > > @@ -1104,7 +1104,7 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev, > > vhost_vq_meta_reset(dev); > > if (vhost_iotlb_add_range(dev->iotlb, msg->iova, > > msg->iova + msg->size - 1, > > - msg->uaddr, msg->perm)) { > > + msg->uaddr, msg->perm, NULL)) { > > ret = -ENOMEM; > > break; > > } > > @@ -1450,7 +1450,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) > > region->guest_phys_addr + > > region->memory_size - 1, > > region->userspace_addr, > > - VHOST_MAP_RW)) > > + VHOST_MAP_RW, NULL)) > > goto err; > > } > > > > diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h > > index f86869651614..b264c627e94b 100644 > > --- a/include/linux/vdpa.h > > +++ b/include/linux/vdpa.h > > @@ -189,6 +189,7 @@ struct vdpa_iova_range { > > * @size: size of the area > > * @pa: physical address for the map > > * @perm: device access permission (VHOST_MAP_XX) > > + * @opaque: the opaque pointer for the mapping > > * Returns integer: success (0) or error (< 0) > > * @dma_unmap: Unmap an area of IOVA (optional but > > * must be implemented with dma_map) > > @@ -243,7 +244,7 @@ struct vdpa_config_ops { > > /* DMA ops */ > > int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb); > > int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size, > > - u64 pa, u32 perm); > > + u64 pa, u32 perm, void *opaque); > > int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size); > > > > /* Free device resources */ > > diff --git a/include/linux/vhost_iotlb.h b/include/linux/vhost_iotlb.h > > index 6b09b786a762..66a50c11c8ca 100644 > > --- a/include/linux/vhost_iotlb.h > > +++ b/include/linux/vhost_iotlb.h > > @@ -4,6 +4,11 @@ > > > > #include <linux/interval_tree_generic.h> > > > > +struct vhost_iotlb_file { > > + struct file *file; > > + u64 offset; > > +}; > > > I think we'd better either: > > 1) simply use struct vhost_iotlb_file * instead of void *opaque for > vhost_iotlb_map > > or > > 2)rename and move the vhost_iotlb_file to vdpa > > 2) looks better since we want to let vhost iotlb to carry any type of > context (opaque pointer) > I agree. So we need to introduce struct vdpa_iotlb_file in include/linux/vdpa.h, right? > And if we do this, the modification of vdpa_config_ops deserves a > separate patch. > Sorry, I didn't get you here. What do you mean by the modification of vdpa_config_ops? Do you mean adding an opaque pointer to ops.dma_map? Thanks, Yongji
On 2021/1/20 下午3:52, Yongji Xie wrote: > On Wed, Jan 20, 2021 at 2:24 PM Jason Wang <jasowang@redhat.com> wrote: >> >> On 2021/1/19 下午12:59, Xie Yongji wrote: >>> Add an opaque pointer for vhost IOTLB to store the >>> corresponding vma->vm_file and offset on the DMA mapping. >> >> Let's split the patch into two. >> >> 1) opaque pointer >> 2) vma stuffs >> > OK. > >>> It will be used in VDUSE case later. >>> >>> Suggested-by: Jason Wang <jasowang@redhat.com> >>> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> >>> --- >>> drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++--- >>> drivers/vhost/iotlb.c | 5 ++- >>> drivers/vhost/vdpa.c | 66 +++++++++++++++++++++++++++++++++++----- >>> drivers/vhost/vhost.c | 4 +-- >>> include/linux/vdpa.h | 3 +- >>> include/linux/vhost_iotlb.h | 8 ++++- >>> 6 files changed, 79 insertions(+), 18 deletions(-) >>> >>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c >>> index 03c796873a6b..1ffcef67954f 100644 >>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c >>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c >>> @@ -279,7 +279,7 @@ static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page, >>> */ >>> spin_lock(&vdpasim->iommu_lock); >>> ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1, >>> - pa, dir_to_perm(dir)); >>> + pa, dir_to_perm(dir), NULL); >> >> Maybe its better to introduce >> >> vhost_iotlb_add_range_ctx() which can accepts the opaque (context). And >> let vhost_iotlb_add_range() just call that. >> > If so, we need export both vhost_iotlb_add_range() and > vhost_iotlb_add_range_ctx() which will be used in VDUSE driver. Is it > a bit redundant? Probably not, we do something similar in virtio core: void *virtqueue_get_buf_ctx(struct virtqueue *_vq, unsigned int *len, void **ctx) { struct vring_virtqueue *vq = to_vvq(_vq); return vq->packed_ring ? virtqueue_get_buf_ctx_packed(_vq, len, ctx) : virtqueue_get_buf_ctx_split(_vq, len, ctx); } EXPORT_SYMBOL_GPL(virtqueue_get_buf_ctx); void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) { return virtqueue_get_buf_ctx(_vq, len, NULL); } EXPORT_SYMBOL_GPL(virtqueue_get_buf); > >>> spin_unlock(&vdpasim->iommu_lock); >>> if (ret) >>> return DMA_MAPPING_ERROR; >>> @@ -317,7 +317,7 @@ static void *vdpasim_alloc_coherent(struct device *dev, size_t size, >>> >>> ret = vhost_iotlb_add_range(iommu, (u64)pa, >>> (u64)pa + size - 1, >>> - pa, VHOST_MAP_RW); >>> + pa, VHOST_MAP_RW, NULL); >>> if (ret) { >>> *dma_addr = DMA_MAPPING_ERROR; >>> kfree(addr); >>> @@ -625,7 +625,8 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, >>> for (map = vhost_iotlb_itree_first(iotlb, start, last); map; >>> map = vhost_iotlb_itree_next(map, start, last)) { >>> ret = vhost_iotlb_add_range(vdpasim->iommu, map->start, >>> - map->last, map->addr, map->perm); >>> + map->last, map->addr, >>> + map->perm, NULL); >>> if (ret) >>> goto err; >>> } >>> @@ -639,14 +640,14 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, >>> } >>> >>> static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size, >>> - u64 pa, u32 perm) >>> + u64 pa, u32 perm, void *opaque) >>> { >>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); >>> int ret; >>> >>> spin_lock(&vdpasim->iommu_lock); >>> ret = vhost_iotlb_add_range(vdpasim->iommu, iova, iova + size - 1, pa, >>> - perm); >>> + perm, NULL); >>> spin_unlock(&vdpasim->iommu_lock); >>> >>> return ret; >>> diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c >>> index 0fd3f87e913c..3bd5bd06cdbc 100644 >>> --- a/drivers/vhost/iotlb.c >>> +++ b/drivers/vhost/iotlb.c >>> @@ -42,13 +42,15 @@ EXPORT_SYMBOL_GPL(vhost_iotlb_map_free); >>> * @last: last of IOVA range >>> * @addr: the address that is mapped to @start >>> * @perm: access permission of this range >>> + * @opaque: the opaque pointer for the IOTLB mapping >>> * >>> * Returns an error last is smaller than start or memory allocation >>> * fails >>> */ >>> int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, >>> u64 start, u64 last, >>> - u64 addr, unsigned int perm) >>> + u64 addr, unsigned int perm, >>> + void *opaque) >>> { >>> struct vhost_iotlb_map *map; >>> >>> @@ -71,6 +73,7 @@ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, >>> map->last = last; >>> map->addr = addr; >>> map->perm = perm; >>> + map->opaque = opaque; >>> >>> iotlb->nmaps++; >>> vhost_iotlb_itree_insert(map, &iotlb->root); >>> diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c >>> index 36b6950ba37f..e83e5be7cec8 100644 >>> --- a/drivers/vhost/vdpa.c >>> +++ b/drivers/vhost/vdpa.c >>> @@ -488,6 +488,7 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) >>> struct vhost_dev *dev = &v->vdev; >>> struct vdpa_device *vdpa = v->vdpa; >>> struct vhost_iotlb *iotlb = dev->iotlb; >>> + struct vhost_iotlb_file *iotlb_file; >>> struct vhost_iotlb_map *map; >>> struct page *page; >>> unsigned long pfn, pinned; >>> @@ -504,6 +505,10 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) >>> } >>> atomic64_sub(map->size >> PAGE_SHIFT, >>> &dev->mm->pinned_vm); >>> + } else if (map->opaque) { >>> + iotlb_file = (struct vhost_iotlb_file *)map->opaque; >>> + fput(iotlb_file->file); >>> + kfree(iotlb_file); >>> } >>> vhost_iotlb_map_free(iotlb, map); >>> } >>> @@ -540,8 +545,8 @@ static int perm_to_iommu_flags(u32 perm) >>> return flags | IOMMU_CACHE; >>> } >>> >>> -static int vhost_vdpa_map(struct vhost_vdpa *v, >>> - u64 iova, u64 size, u64 pa, u32 perm) >>> +static int vhost_vdpa_map(struct vhost_vdpa *v, u64 iova, >>> + u64 size, u64 pa, u32 perm, void *opaque) >>> { >>> struct vhost_dev *dev = &v->vdev; >>> struct vdpa_device *vdpa = v->vdpa; >>> @@ -549,12 +554,12 @@ static int vhost_vdpa_map(struct vhost_vdpa *v, >>> int r = 0; >>> >>> r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1, >>> - pa, perm); >>> + pa, perm, opaque); >>> if (r) >>> return r; >>> >>> if (ops->dma_map) { >>> - r = ops->dma_map(vdpa, iova, size, pa, perm); >>> + r = ops->dma_map(vdpa, iova, size, pa, perm, opaque); >>> } else if (ops->set_map) { >>> if (!v->in_batch) >>> r = ops->set_map(vdpa, dev->iotlb); >>> @@ -591,6 +596,51 @@ static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size) >>> } >>> } >>> >>> +static int vhost_vdpa_sva_map(struct vhost_vdpa *v, >>> + u64 iova, u64 size, u64 uaddr, u32 perm) >>> +{ >>> + u64 offset, map_size, map_iova = iova; >>> + struct vhost_iotlb_file *iotlb_file; >>> + struct vm_area_struct *vma; >>> + int ret; >> >> Lacking mmap_read_lock(). >> > Good catch! Will fix it. > >>> + >>> + while (size) { >>> + vma = find_vma(current->mm, uaddr); >>> + if (!vma) { >>> + ret = -EINVAL; >>> + goto err; >>> + } >>> + map_size = min(size, vma->vm_end - uaddr); >>> + offset = (vma->vm_pgoff << PAGE_SHIFT) + uaddr - vma->vm_start; >>> + iotlb_file = NULL; >>> + if (vma->vm_file && (vma->vm_flags & VM_SHARED)) { >> >> I wonder if we need more strict check here. When developing vhost-vdpa, >> I try hard to make sure the map can only work for user pages. >> >> So the question is: do we need to exclude MMIO area or only allow shmem >> to work here? >> > Do you mean we need to check VM_MIXEDMAP | VM_PFNMAP here? I meant do we need to allow VM_IO here? (We don't allow such case in vhost-vdpa now). > > It makes sense to me. > >> >>> + iotlb_file = kmalloc(sizeof(*iotlb_file), GFP_KERNEL); >>> + if (!iotlb_file) { >>> + ret = -ENOMEM; >>> + goto err; >>> + } >>> + iotlb_file->file = get_file(vma->vm_file); >>> + iotlb_file->offset = offset; >>> + } >> >> I wonder if it's better to allocate iotlb_file and make iotlb_file->file >> = NULL && iotlb_file->offset = 0. This can force a consistent code for >> the vDPA parents. >> > Looks fine to me. > >> Or we can simply fail the map without a file as backend. >> > Actually there will be some vma without vm_file during vm booting. Yes, e.g bios or other rom. Vhost-user has the similar issue and they filter the out them in qemu. For vhost-vDPA, consider it can supports various difference backends, we can't do that. > >>> + ret = vhost_vdpa_map(v, map_iova, map_size, uaddr, >>> + perm, iotlb_file); >>> + if (ret) { >>> + if (iotlb_file) { >>> + fput(iotlb_file->file); >>> + kfree(iotlb_file); >>> + } >>> + goto err; >>> + } >>> + size -= map_size; >>> + uaddr += map_size; >>> + map_iova += map_size; >>> + } >>> + return 0; >>> +err: >>> + vhost_vdpa_unmap(v, iova, map_iova - iova); >>> + return ret; >>> +} >>> + >>> static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, >>> struct vhost_iotlb_msg *msg) >>> { >>> @@ -615,8 +665,8 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, >>> return -EEXIST; >>> >>> if (vdpa->sva) >>> - return vhost_vdpa_map(v, msg->iova, msg->size, >>> - msg->uaddr, msg->perm); >>> + return vhost_vdpa_sva_map(v, msg->iova, msg->size, >>> + msg->uaddr, msg->perm); >> >> So I think it's better squash vhost_vdpa_sva_map() and related changes >> into previous patch. >> > OK, so the order of the patches is: > 1) opaque pointer > 2) va support + vma stuffs? > > Is it OK? Fine with me. > >>> /* Limit the use of memory for bookkeeping */ >>> page_list = (struct page **) __get_free_page(GFP_KERNEL); >>> @@ -671,7 +721,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, >>> csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT; >>> ret = vhost_vdpa_map(v, iova, csize, >>> map_pfn << PAGE_SHIFT, >>> - msg->perm); >>> + msg->perm, NULL); >>> if (ret) { >>> /* >>> * Unpin the pages that are left unmapped >>> @@ -700,7 +750,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, >>> >>> /* Pin the rest chunk */ >>> ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT, >>> - map_pfn << PAGE_SHIFT, msg->perm); >>> + map_pfn << PAGE_SHIFT, msg->perm, NULL); >>> out: >>> if (ret) { >>> if (nchunks) { >>> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c >>> index a262e12c6dc2..120dd5b3c119 100644 >>> --- a/drivers/vhost/vhost.c >>> +++ b/drivers/vhost/vhost.c >>> @@ -1104,7 +1104,7 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev, >>> vhost_vq_meta_reset(dev); >>> if (vhost_iotlb_add_range(dev->iotlb, msg->iova, >>> msg->iova + msg->size - 1, >>> - msg->uaddr, msg->perm)) { >>> + msg->uaddr, msg->perm, NULL)) { >>> ret = -ENOMEM; >>> break; >>> } >>> @@ -1450,7 +1450,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) >>> region->guest_phys_addr + >>> region->memory_size - 1, >>> region->userspace_addr, >>> - VHOST_MAP_RW)) >>> + VHOST_MAP_RW, NULL)) >>> goto err; >>> } >>> >>> diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h >>> index f86869651614..b264c627e94b 100644 >>> --- a/include/linux/vdpa.h >>> +++ b/include/linux/vdpa.h >>> @@ -189,6 +189,7 @@ struct vdpa_iova_range { >>> * @size: size of the area >>> * @pa: physical address for the map >>> * @perm: device access permission (VHOST_MAP_XX) >>> + * @opaque: the opaque pointer for the mapping >>> * Returns integer: success (0) or error (< 0) >>> * @dma_unmap: Unmap an area of IOVA (optional but >>> * must be implemented with dma_map) >>> @@ -243,7 +244,7 @@ struct vdpa_config_ops { >>> /* DMA ops */ >>> int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb); >>> int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size, >>> - u64 pa, u32 perm); >>> + u64 pa, u32 perm, void *opaque); >>> int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size); >>> >>> /* Free device resources */ >>> diff --git a/include/linux/vhost_iotlb.h b/include/linux/vhost_iotlb.h >>> index 6b09b786a762..66a50c11c8ca 100644 >>> --- a/include/linux/vhost_iotlb.h >>> +++ b/include/linux/vhost_iotlb.h >>> @@ -4,6 +4,11 @@ >>> >>> #include <linux/interval_tree_generic.h> >>> >>> +struct vhost_iotlb_file { >>> + struct file *file; >>> + u64 offset; >>> +}; >> >> I think we'd better either: >> >> 1) simply use struct vhost_iotlb_file * instead of void *opaque for >> vhost_iotlb_map >> >> or >> >> 2)rename and move the vhost_iotlb_file to vdpa >> >> 2) looks better since we want to let vhost iotlb to carry any type of >> context (opaque pointer) >> > I agree. So we need to introduce struct vdpa_iotlb_file in > include/linux/vdpa.h, right? Yes. > >> And if we do this, the modification of vdpa_config_ops deserves a >> separate patch. >> > Sorry, I didn't get you here. What do you mean by the modification of > vdpa_config_ops? Do you mean adding an opaque pointer to ops.dma_map? Yes. Thanks > > Thanks, > Yongji >
On Wed, Jan 27, 2021 at 11:51 AM Jason Wang <jasowang@redhat.com> wrote: > > > On 2021/1/20 下午3:52, Yongji Xie wrote: > > On Wed, Jan 20, 2021 at 2:24 PM Jason Wang <jasowang@redhat.com> wrote: > >> > >> On 2021/1/19 下午12:59, Xie Yongji wrote: > >>> Add an opaque pointer for vhost IOTLB to store the > >>> corresponding vma->vm_file and offset on the DMA mapping. > >> > >> Let's split the patch into two. > >> > >> 1) opaque pointer > >> 2) vma stuffs > >> > > OK. > > > >>> It will be used in VDUSE case later. > >>> > >>> Suggested-by: Jason Wang <jasowang@redhat.com> > >>> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> > >>> --- > >>> drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++--- > >>> drivers/vhost/iotlb.c | 5 ++- > >>> drivers/vhost/vdpa.c | 66 +++++++++++++++++++++++++++++++++++----- > >>> drivers/vhost/vhost.c | 4 +-- > >>> include/linux/vdpa.h | 3 +- > >>> include/linux/vhost_iotlb.h | 8 ++++- > >>> 6 files changed, 79 insertions(+), 18 deletions(-) > >>> > >>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>> index 03c796873a6b..1ffcef67954f 100644 > >>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>> @@ -279,7 +279,7 @@ static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page, > >>> */ > >>> spin_lock(&vdpasim->iommu_lock); > >>> ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1, > >>> - pa, dir_to_perm(dir)); > >>> + pa, dir_to_perm(dir), NULL); > >> > >> Maybe its better to introduce > >> > >> vhost_iotlb_add_range_ctx() which can accepts the opaque (context). And > >> let vhost_iotlb_add_range() just call that. > >> > > If so, we need export both vhost_iotlb_add_range() and > > vhost_iotlb_add_range_ctx() which will be used in VDUSE driver. Is it > > a bit redundant? > > > Probably not, we do something similar in virtio core: > > void *virtqueue_get_buf_ctx(struct virtqueue *_vq, unsigned int *len, > void **ctx) > { > struct vring_virtqueue *vq = to_vvq(_vq); > > return vq->packed_ring ? virtqueue_get_buf_ctx_packed(_vq, len, ctx) : > virtqueue_get_buf_ctx_split(_vq, len, ctx); > } > EXPORT_SYMBOL_GPL(virtqueue_get_buf_ctx); > > void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) > { > return virtqueue_get_buf_ctx(_vq, len, NULL); > } > EXPORT_SYMBOL_GPL(virtqueue_get_buf); > I see. Will do it in the next version. > > > > >>> spin_unlock(&vdpasim->iommu_lock); > >>> if (ret) > >>> return DMA_MAPPING_ERROR; > >>> @@ -317,7 +317,7 @@ static void *vdpasim_alloc_coherent(struct device *dev, size_t size, > >>> > >>> ret = vhost_iotlb_add_range(iommu, (u64)pa, > >>> (u64)pa + size - 1, > >>> - pa, VHOST_MAP_RW); > >>> + pa, VHOST_MAP_RW, NULL); > >>> if (ret) { > >>> *dma_addr = DMA_MAPPING_ERROR; > >>> kfree(addr); > >>> @@ -625,7 +625,8 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > >>> for (map = vhost_iotlb_itree_first(iotlb, start, last); map; > >>> map = vhost_iotlb_itree_next(map, start, last)) { > >>> ret = vhost_iotlb_add_range(vdpasim->iommu, map->start, > >>> - map->last, map->addr, map->perm); > >>> + map->last, map->addr, > >>> + map->perm, NULL); > >>> if (ret) > >>> goto err; > >>> } > >>> @@ -639,14 +640,14 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, > >>> } > >>> > >>> static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size, > >>> - u64 pa, u32 perm) > >>> + u64 pa, u32 perm, void *opaque) > >>> { > >>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>> int ret; > >>> > >>> spin_lock(&vdpasim->iommu_lock); > >>> ret = vhost_iotlb_add_range(vdpasim->iommu, iova, iova + size - 1, pa, > >>> - perm); > >>> + perm, NULL); > >>> spin_unlock(&vdpasim->iommu_lock); > >>> > >>> return ret; > >>> diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c > >>> index 0fd3f87e913c..3bd5bd06cdbc 100644 > >>> --- a/drivers/vhost/iotlb.c > >>> +++ b/drivers/vhost/iotlb.c > >>> @@ -42,13 +42,15 @@ EXPORT_SYMBOL_GPL(vhost_iotlb_map_free); > >>> * @last: last of IOVA range > >>> * @addr: the address that is mapped to @start > >>> * @perm: access permission of this range > >>> + * @opaque: the opaque pointer for the IOTLB mapping > >>> * > >>> * Returns an error last is smaller than start or memory allocation > >>> * fails > >>> */ > >>> int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > >>> u64 start, u64 last, > >>> - u64 addr, unsigned int perm) > >>> + u64 addr, unsigned int perm, > >>> + void *opaque) > >>> { > >>> struct vhost_iotlb_map *map; > >>> > >>> @@ -71,6 +73,7 @@ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, > >>> map->last = last; > >>> map->addr = addr; > >>> map->perm = perm; > >>> + map->opaque = opaque; > >>> > >>> iotlb->nmaps++; > >>> vhost_iotlb_itree_insert(map, &iotlb->root); > >>> diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c > >>> index 36b6950ba37f..e83e5be7cec8 100644 > >>> --- a/drivers/vhost/vdpa.c > >>> +++ b/drivers/vhost/vdpa.c > >>> @@ -488,6 +488,7 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > >>> struct vhost_dev *dev = &v->vdev; > >>> struct vdpa_device *vdpa = v->vdpa; > >>> struct vhost_iotlb *iotlb = dev->iotlb; > >>> + struct vhost_iotlb_file *iotlb_file; > >>> struct vhost_iotlb_map *map; > >>> struct page *page; > >>> unsigned long pfn, pinned; > >>> @@ -504,6 +505,10 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) > >>> } > >>> atomic64_sub(map->size >> PAGE_SHIFT, > >>> &dev->mm->pinned_vm); > >>> + } else if (map->opaque) { > >>> + iotlb_file = (struct vhost_iotlb_file *)map->opaque; > >>> + fput(iotlb_file->file); > >>> + kfree(iotlb_file); > >>> } > >>> vhost_iotlb_map_free(iotlb, map); > >>> } > >>> @@ -540,8 +545,8 @@ static int perm_to_iommu_flags(u32 perm) > >>> return flags | IOMMU_CACHE; > >>> } > >>> > >>> -static int vhost_vdpa_map(struct vhost_vdpa *v, > >>> - u64 iova, u64 size, u64 pa, u32 perm) > >>> +static int vhost_vdpa_map(struct vhost_vdpa *v, u64 iova, > >>> + u64 size, u64 pa, u32 perm, void *opaque) > >>> { > >>> struct vhost_dev *dev = &v->vdev; > >>> struct vdpa_device *vdpa = v->vdpa; > >>> @@ -549,12 +554,12 @@ static int vhost_vdpa_map(struct vhost_vdpa *v, > >>> int r = 0; > >>> > >>> r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1, > >>> - pa, perm); > >>> + pa, perm, opaque); > >>> if (r) > >>> return r; > >>> > >>> if (ops->dma_map) { > >>> - r = ops->dma_map(vdpa, iova, size, pa, perm); > >>> + r = ops->dma_map(vdpa, iova, size, pa, perm, opaque); > >>> } else if (ops->set_map) { > >>> if (!v->in_batch) > >>> r = ops->set_map(vdpa, dev->iotlb); > >>> @@ -591,6 +596,51 @@ static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size) > >>> } > >>> } > >>> > >>> +static int vhost_vdpa_sva_map(struct vhost_vdpa *v, > >>> + u64 iova, u64 size, u64 uaddr, u32 perm) > >>> +{ > >>> + u64 offset, map_size, map_iova = iova; > >>> + struct vhost_iotlb_file *iotlb_file; > >>> + struct vm_area_struct *vma; > >>> + int ret; > >> > >> Lacking mmap_read_lock(). > >> > > Good catch! Will fix it. > > > >>> + > >>> + while (size) { > >>> + vma = find_vma(current->mm, uaddr); > >>> + if (!vma) { > >>> + ret = -EINVAL; > >>> + goto err; > >>> + } > >>> + map_size = min(size, vma->vm_end - uaddr); > >>> + offset = (vma->vm_pgoff << PAGE_SHIFT) + uaddr - vma->vm_start; > >>> + iotlb_file = NULL; > >>> + if (vma->vm_file && (vma->vm_flags & VM_SHARED)) { > >> > >> I wonder if we need more strict check here. When developing vhost-vdpa, > >> I try hard to make sure the map can only work for user pages. > >> > >> So the question is: do we need to exclude MMIO area or only allow shmem > >> to work here? > >> > > Do you mean we need to check VM_MIXEDMAP | VM_PFNMAP here? > > > I meant do we need to allow VM_IO here? (We don't allow such case in > vhost-vdpa now). > OK, let's exclude the vma with VM_IO | VM_PFNMAP. > > > > > It makes sense to me. > > > >> > >>> + iotlb_file = kmalloc(sizeof(*iotlb_file), GFP_KERNEL); > >>> + if (!iotlb_file) { > >>> + ret = -ENOMEM; > >>> + goto err; > >>> + } > >>> + iotlb_file->file = get_file(vma->vm_file); > >>> + iotlb_file->offset = offset; > >>> + } > >> > >> I wonder if it's better to allocate iotlb_file and make iotlb_file->file > >> = NULL && iotlb_file->offset = 0. This can force a consistent code for > >> the vDPA parents. > >> > > Looks fine to me. > > > >> Or we can simply fail the map without a file as backend. > >> > > Actually there will be some vma without vm_file during vm booting. > > > Yes, e.g bios or other rom. Vhost-user has the similar issue and they > filter the out them in qemu. > > For vhost-vDPA, consider it can supports various difference backends, we > can't do that. > OK, I will transfer iotlb_file with NULL file and let the backend do the filtering. Thanks, Yongji
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c index 03c796873a6b..1ffcef67954f 100644 --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c @@ -279,7 +279,7 @@ static dma_addr_t vdpasim_map_page(struct device *dev, struct page *page, */ spin_lock(&vdpasim->iommu_lock); ret = vhost_iotlb_add_range(iommu, pa, pa + size - 1, - pa, dir_to_perm(dir)); + pa, dir_to_perm(dir), NULL); spin_unlock(&vdpasim->iommu_lock); if (ret) return DMA_MAPPING_ERROR; @@ -317,7 +317,7 @@ static void *vdpasim_alloc_coherent(struct device *dev, size_t size, ret = vhost_iotlb_add_range(iommu, (u64)pa, (u64)pa + size - 1, - pa, VHOST_MAP_RW); + pa, VHOST_MAP_RW, NULL); if (ret) { *dma_addr = DMA_MAPPING_ERROR; kfree(addr); @@ -625,7 +625,8 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, for (map = vhost_iotlb_itree_first(iotlb, start, last); map; map = vhost_iotlb_itree_next(map, start, last)) { ret = vhost_iotlb_add_range(vdpasim->iommu, map->start, - map->last, map->addr, map->perm); + map->last, map->addr, + map->perm, NULL); if (ret) goto err; } @@ -639,14 +640,14 @@ static int vdpasim_set_map(struct vdpa_device *vdpa, } static int vdpasim_dma_map(struct vdpa_device *vdpa, u64 iova, u64 size, - u64 pa, u32 perm) + u64 pa, u32 perm, void *opaque) { struct vdpasim *vdpasim = vdpa_to_sim(vdpa); int ret; spin_lock(&vdpasim->iommu_lock); ret = vhost_iotlb_add_range(vdpasim->iommu, iova, iova + size - 1, pa, - perm); + perm, NULL); spin_unlock(&vdpasim->iommu_lock); return ret; diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c index 0fd3f87e913c..3bd5bd06cdbc 100644 --- a/drivers/vhost/iotlb.c +++ b/drivers/vhost/iotlb.c @@ -42,13 +42,15 @@ EXPORT_SYMBOL_GPL(vhost_iotlb_map_free); * @last: last of IOVA range * @addr: the address that is mapped to @start * @perm: access permission of this range + * @opaque: the opaque pointer for the IOTLB mapping * * Returns an error last is smaller than start or memory allocation * fails */ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, u64 start, u64 last, - u64 addr, unsigned int perm) + u64 addr, unsigned int perm, + void *opaque) { struct vhost_iotlb_map *map; @@ -71,6 +73,7 @@ int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, map->last = last; map->addr = addr; map->perm = perm; + map->opaque = opaque; iotlb->nmaps++; vhost_iotlb_itree_insert(map, &iotlb->root); diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 36b6950ba37f..e83e5be7cec8 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -488,6 +488,7 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) struct vhost_dev *dev = &v->vdev; struct vdpa_device *vdpa = v->vdpa; struct vhost_iotlb *iotlb = dev->iotlb; + struct vhost_iotlb_file *iotlb_file; struct vhost_iotlb_map *map; struct page *page; unsigned long pfn, pinned; @@ -504,6 +505,10 @@ static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last) } atomic64_sub(map->size >> PAGE_SHIFT, &dev->mm->pinned_vm); + } else if (map->opaque) { + iotlb_file = (struct vhost_iotlb_file *)map->opaque; + fput(iotlb_file->file); + kfree(iotlb_file); } vhost_iotlb_map_free(iotlb, map); } @@ -540,8 +545,8 @@ static int perm_to_iommu_flags(u32 perm) return flags | IOMMU_CACHE; } -static int vhost_vdpa_map(struct vhost_vdpa *v, - u64 iova, u64 size, u64 pa, u32 perm) +static int vhost_vdpa_map(struct vhost_vdpa *v, u64 iova, + u64 size, u64 pa, u32 perm, void *opaque) { struct vhost_dev *dev = &v->vdev; struct vdpa_device *vdpa = v->vdpa; @@ -549,12 +554,12 @@ static int vhost_vdpa_map(struct vhost_vdpa *v, int r = 0; r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1, - pa, perm); + pa, perm, opaque); if (r) return r; if (ops->dma_map) { - r = ops->dma_map(vdpa, iova, size, pa, perm); + r = ops->dma_map(vdpa, iova, size, pa, perm, opaque); } else if (ops->set_map) { if (!v->in_batch) r = ops->set_map(vdpa, dev->iotlb); @@ -591,6 +596,51 @@ static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size) } } +static int vhost_vdpa_sva_map(struct vhost_vdpa *v, + u64 iova, u64 size, u64 uaddr, u32 perm) +{ + u64 offset, map_size, map_iova = iova; + struct vhost_iotlb_file *iotlb_file; + struct vm_area_struct *vma; + int ret; + + while (size) { + vma = find_vma(current->mm, uaddr); + if (!vma) { + ret = -EINVAL; + goto err; + } + map_size = min(size, vma->vm_end - uaddr); + offset = (vma->vm_pgoff << PAGE_SHIFT) + uaddr - vma->vm_start; + iotlb_file = NULL; + if (vma->vm_file && (vma->vm_flags & VM_SHARED)) { + iotlb_file = kmalloc(sizeof(*iotlb_file), GFP_KERNEL); + if (!iotlb_file) { + ret = -ENOMEM; + goto err; + } + iotlb_file->file = get_file(vma->vm_file); + iotlb_file->offset = offset; + } + ret = vhost_vdpa_map(v, map_iova, map_size, uaddr, + perm, iotlb_file); + if (ret) { + if (iotlb_file) { + fput(iotlb_file->file); + kfree(iotlb_file); + } + goto err; + } + size -= map_size; + uaddr += map_size; + map_iova += map_size; + } + return 0; +err: + vhost_vdpa_unmap(v, iova, map_iova - iova); + return ret; +} + static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, struct vhost_iotlb_msg *msg) { @@ -615,8 +665,8 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, return -EEXIST; if (vdpa->sva) - return vhost_vdpa_map(v, msg->iova, msg->size, - msg->uaddr, msg->perm); + return vhost_vdpa_sva_map(v, msg->iova, msg->size, + msg->uaddr, msg->perm); /* Limit the use of memory for bookkeeping */ page_list = (struct page **) __get_free_page(GFP_KERNEL); @@ -671,7 +721,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT; ret = vhost_vdpa_map(v, iova, csize, map_pfn << PAGE_SHIFT, - msg->perm); + msg->perm, NULL); if (ret) { /* * Unpin the pages that are left unmapped @@ -700,7 +750,7 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v, /* Pin the rest chunk */ ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT, - map_pfn << PAGE_SHIFT, msg->perm); + map_pfn << PAGE_SHIFT, msg->perm, NULL); out: if (ret) { if (nchunks) { diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index a262e12c6dc2..120dd5b3c119 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1104,7 +1104,7 @@ static int vhost_process_iotlb_msg(struct vhost_dev *dev, vhost_vq_meta_reset(dev); if (vhost_iotlb_add_range(dev->iotlb, msg->iova, msg->iova + msg->size - 1, - msg->uaddr, msg->perm)) { + msg->uaddr, msg->perm, NULL)) { ret = -ENOMEM; break; } @@ -1450,7 +1450,7 @@ static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) region->guest_phys_addr + region->memory_size - 1, region->userspace_addr, - VHOST_MAP_RW)) + VHOST_MAP_RW, NULL)) goto err; } diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h index f86869651614..b264c627e94b 100644 --- a/include/linux/vdpa.h +++ b/include/linux/vdpa.h @@ -189,6 +189,7 @@ struct vdpa_iova_range { * @size: size of the area * @pa: physical address for the map * @perm: device access permission (VHOST_MAP_XX) + * @opaque: the opaque pointer for the mapping * Returns integer: success (0) or error (< 0) * @dma_unmap: Unmap an area of IOVA (optional but * must be implemented with dma_map) @@ -243,7 +244,7 @@ struct vdpa_config_ops { /* DMA ops */ int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb); int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size, - u64 pa, u32 perm); + u64 pa, u32 perm, void *opaque); int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size); /* Free device resources */ diff --git a/include/linux/vhost_iotlb.h b/include/linux/vhost_iotlb.h index 6b09b786a762..66a50c11c8ca 100644 --- a/include/linux/vhost_iotlb.h +++ b/include/linux/vhost_iotlb.h @@ -4,6 +4,11 @@ #include <linux/interval_tree_generic.h> +struct vhost_iotlb_file { + struct file *file; + u64 offset; +}; + struct vhost_iotlb_map { struct rb_node rb; struct list_head link; @@ -17,6 +22,7 @@ struct vhost_iotlb_map { u32 perm; u32 flags_padding; u64 __subtree_last; + void *opaque; }; #define VHOST_IOTLB_FLAG_RETIRE 0x1 @@ -30,7 +36,7 @@ struct vhost_iotlb { }; int vhost_iotlb_add_range(struct vhost_iotlb *iotlb, u64 start, u64 last, - u64 addr, unsigned int perm); + u64 addr, unsigned int perm, void *opaque); void vhost_iotlb_del_range(struct vhost_iotlb *iotlb, u64 start, u64 last); struct vhost_iotlb *vhost_iotlb_alloc(unsigned int limit, unsigned int flags);
Add an opaque pointer for vhost IOTLB to store the corresponding vma->vm_file and offset on the DMA mapping. It will be used in VDUSE case later. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> --- drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++--- drivers/vhost/iotlb.c | 5 ++- drivers/vhost/vdpa.c | 66 +++++++++++++++++++++++++++++++++++----- drivers/vhost/vhost.c | 4 +-- include/linux/vdpa.h | 3 +- include/linux/vhost_iotlb.h | 8 ++++- 6 files changed, 79 insertions(+), 18 deletions(-)