| Message ID | 20210128075806.10318-1-avolmat@me.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/2] ARM: dts: sti: add the spinor controller node within stih407-family | expand |
On Thu, Jan 28, 2021 at 8:58 AM Alain Volmat <avolmat@me.com> wrote: > > add the spinor controller node within stih407-family. > > Signed-off-by: Alain Volmat <avolmat@me.com> dts changes look ok to me, but please resend considering: - Add a proper changelog text, rather than repeating the subject in the body. I'm sure you can find something useful to say about this change: Why do you need this controller? Why was this not originally part of the .dtsi file? - Address your patches to the correct recipients. I see you have eight addresses on 'To:' and only yourself on 'Cc'. Try to find out who would be the person to pick up the patches and send it only to them, with others in Cc. soc@kernel.org should not be in either list here, because that just means we get it in patchwork for the soc tree, but these should be picked up by the platform maintainer and forward to us from there. Arnd
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 23a1746f3baa..21f3347a91d6 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -616,6 +616,21 @@ st,lpc-mode = <ST_LPC_MODE_CLKSRC>; }; + spifsm: spifsm@9022000{ + compatible = "st,spi-fsm"; + reg = <0x9022000 0x1000>; + reg-names = "spi-fsm"; + clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + clock-names = "emi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsm>; + st,syscfg = <&syscfg_core>; + st,boot-device-reg = <0x8c4>; + st,boot-device-spi = <0x68>; + + status = "disabled"; + }; + sata0: sata@9b20000 { compatible = "st,ahci"; reg = <0x9b20000 0x1000>;
add the spinor controller node within stih407-family. Signed-off-by: Alain Volmat <avolmat@me.com> --- arch/arm/boot/dts/stih407-family.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)